Hi Guys,
I have started a project using Linq for sql and SSCE. Everything goes well until I realize that SSCE can only run in full trust. Linq for sql is planned to support partial trust scenario. Any plans for such a support in Sql Compact Edition?
Dany
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
I make a user dimis for my local sql server express, when I try to login with this user with ems manager lite, this message occurs:
Login failed.The user is not asociated with a trust sql server connection.
With windows authentication I can login without problem.
What is wrong?
Dimis
I have a project in visual basic express that It connect with a sql 2005 express database. When I execute the project in the pc that have installing the sql, there´s no problem with it, but when I use a virtual machine to execute, there´s a problem with the sql connection.
The follwing is my sql connection:
Data Source=USERSQLEXPRESS;Initial Catalog=WORKFLOW;Integrated Security=True;Persist Security Info=True;User ID=sa
and y try with this:
Data Source=USERSQLEXPRESS;Initial Catalog=WORKFLOW;User ID=sa; password=admin13;
This connection are usable for the local machine but when I execute the program in other virtual pc there´s the following error: The user 'sa' is not associeted with a trusted connection SQL Server
System.InvalidOperationException was unhandled
Message="An error occurred creating the form. See Exception.InnerException for details. The error is: Error de inicio de sesión del usuario 'sa'. El usuario no está asociado a una conexión de SQL Server de confianza."
Source="Correspondencia_UAC"
StackTrace:
at Correspondencia_UAC.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190
at Correspondencia_UAC.My.MyProject.MyForms.get_frmLogin()
at Correspondencia_UAC.My.MyApplication.OnCreateMainForm() in C:Correspondencia_UACCorrespondencia_UACMy ProjectApplication.Designer.vb:line 35
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at Correspondencia_UAC.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81
at System.AppDomain.nExecuteAssembly(Assembly assembly, String[] args)
at System.Runtime.Hosting.ManifestRunner.Run(Boolean checkAptModel)
at System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly()
at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData)
at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Data Source=USERSQLEXPRESS;Initial Catalog=WORKFLOW;Integrated Security=True;Persist Security Info=True;User ID=sa
I need to set up a trust between a client machine (OS = XP professional) and an SQL server (OS = Windows Server 2000 and SQL 2000) using the client's machine name as opposed to a user Id. One of the main uses of this would be for BCP's using the "-T" option. I cannot find any information on how to do this but it seems I saw it done several years ago. Can anyone give me guidance on this?
View 1 Replies View RelatedIn the future =* or *= will not be suportted but I found more then one examples that show outer join does not bring all the rows =* does.
Can any one tell me what is wrong? Market table has 19 markets Budget table has rows for BudgetYear=2006 but none for 2007
BTW the same is true in SQL2005 and 2000
----------------------------------------------------------------
SELECT Market_code, Description,
Revenue = SUM( CASE WHEN BudgetType = 'B' THEN BudgetAmount ELSE 0 END ),
CM = SUM( CASE WHEN BudgetType = 'C' THEN BudgetAmount ELSE 0 END ),
Tooling = SUM( CASE WHEN BudgetType = 'T' THEN BudgetAmount ELSE 0 END )
FROM Budget RIGHT OUTER JOIN Market ON Budget.Customer_Market_code = Market.Market_code
Where Budget.BudgetYear=2007 or Budget.BudgetYear is null
GROUP BY Market_code, Description
ORDER BY Description
-- ------------------GIVES only 12 results -------------------------------
SELECT Market_code, Description,
Revenue = SUM( CASE WHEN BudgetType = 'B' THEN BudgetAmount ELSE 0 END ),
CM = SUM( CASE WHEN BudgetType = 'C' THEN BudgetAmount ELSE 0 END ),
Tooling = SUM( CASE WHEN BudgetType = 'T' THEN BudgetAmount ELSE 0 END )
FROM Budget, Market
Where Budget.Customer_Market_code =* Market.Market_code
AND Budget.BudgetYear=2007
GROUP BY Market_code, Description
ORDER BY Description
-- ------------------GIVES 19 results -the true------------------------------
Hi Listers,
Can any one clarify me on the following doubt.
I have 2 w2k servers with different domains and On which SQL2k is running on both the Servers. Both the servers don't have any Trust Relations between them.
My questions is, Is it possible to create Linked Servers between sql servers but their Operating Systems doesn't have Trust Relationships?.
Any help would be appreciated.
tks in advance,
Sam
I need to know if there is a way to perform a SQL Server 6.5 backup to a remote network drive WITHOUT USING A TRUST LOGIN.
My network administrator refuses to put a TRUST relation on the Primary Domain Controller. I`m not really sure why, but I need a workaround.
Thanks,
"Work-around Bob"
Hi,
I am working on sql server reporting services 2005 , i got this error while deploying a report
Error 1 The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. C:TempNotificationReportdb.rds 0 0
NB: i checked IIS no ssl required on all sites.
Any Help ?
Thanks
Tarek Ghazali
SQL Server MVP
(Cross post from newsgroup)
Attempting to implement Windows authentication between trusted domains. . .
I have a domain trust set up between two domains connected via persistent vpn:
Hi!
I am trying to establish connection from different domain using ODBC driver with no luck!
I am able to do it within my domain from any place, but it fails from outside. I have two-ways trust established between domains. Users are able to see and use resources both ways.
When I create ODBC it doesn't matter if I use SQL or Windows NT authenctication, I am getting error:
Connection Failed:
SQLState: '01000'
SQLServer Error: 11004
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Connection Open (getbyhostname()() )
Connectio Failed:
SQLState: '08001'
SQL Server Error: 11
I tried to set it with TCP Static Port or Dynamic. No difference.
What should I look into?
Any ideas? Any help?
Thanks.
After a trust with exchange server established the xp_SendMailgives the following error:xp_sendmail: failed with mail error 0x80070005Prior to the trust everything worked fine.I have tried the following:1)Checking SQL and SQLAgents accounts all match up with default mailprofile.2)Confirmed I could send from outlook logged in under the account.3)xp_stopmail and xp_startmail4)restarted the SQL Agent5)Confirmed outlook settings as defined in:kb153159 -http://www.sqlnewsgroups.net/link.a...b/153159/EN-US/I also tried a pop3 account just to test, but no luck.I think what is happening is now that the trust is established when SQLmakes a mail contection it thinks it is user admin@<otherdomain> ratherthan admin@<normaldomain> and therefore thinks that agent account isdifferent than the mail account.Please help if you can.Thanks.
View 2 Replies View RelatedI have just installed SQL Server 2008 Feb CTP. When I try and open the Reporting Services webpage i.e. http://Reportserver/Reports/Â I get the error:
Â
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
Â
In the Reporting Services config, i can't see how to turn this off, apart from removing the SSL entry (port 443 details etc), but this just creates another error.
Â
I am more a developer, so don't really understand SSL, I am just trying to display some reports I have created in 2008.
Â
I am running this on Windows XP.
I am trying to setup SQL Server 2000 Reporting services with an SSL connection. The SQL Server (Windows Server 2003 SP2 Standard) and Reporting Server (Windows Server 2003 R2 SP2 Standard) are on separate machines. I have tried setting up Certificates from both and Stand-Alone and Enterprise CA. I have tried several combinations of the Issue To name (server | server.company | server.company.local) I have modified the rsWebApplication.config and rsReportServer.config to match the certificate€™s Issue to exactly. I have tried installs with both Domain Accounts and NT AUTHORITYSYSTEM logins. I have managed to get https://server/ReportServer to work but I have had no luck with the report manager https://server/reports. How do I fix this error?
Thankyou
I'm using SQL Server 2005 (SP1) Reporting Services on Windows Server 2003 SP1. I access the report server from Internet using SSL, but the server is not exposed directly to the internet. It is behind a firewall, where the required ssl port is setup and is working fine.
In my Reporting Server, the /ReportServer folder works perfect and I can navigate and view all reports. It is the /Reports folder the one that does not work fine. I can enter the /Reports folder, and can list all the reports. But, when I select one of the reports, and it starts rendering, I get the error message:
"The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. The remote certificate is invalid according to the validation procedure."
How can I fix this?
Thanks,
Julio
I am a bit stumped by error generated when attempting to connect to the report url.
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
The only thing I can think of is a certificate is issued to the server (all domain devices) via group policy by cert authority running on the domain.
If I check the bindings within Report Services Configuration Manager the certificate is referenced.
I have tried removing 443 but I am still unable to connect.
A neutron walks into a bar. "I'd like a beer" he says. The bartender promptly serves up a beer. "How much will that be?" asks the neutron. "For you?" replies the bartender, "no charge."
I'm an SQL novice, but I know this must be a common problem.
I'm trying to select a recordset (using ASP), but I know I only want part of the recordset, and am not sure how to limit it ahead of time.
For example, the query will return about 500 rows, but I know I only want to use a small section of these records.
I want to give the user the ability to navigate through small sections of these 500 rows without having to get all rows all the time.
I know ahead of time which rows to get, but have no idea how to limit the recordset before I get it (there is no fields in the database to help).
This is what I'm doing now. "select * from xyz where id=xxx order by date desc;" I know I only want the first 10, or 10-20, or 400-410.
The way I'm doing it now, I'm getting the whole recordset each time, doing a "rs.move x" where x is where I want to start.
This is really a waste of network traffic and memory since my SQL server is on a different machine as the web server running ASP.
How do I do this?
Please email me if you could at pmt@vantagenet.com
Hello - I was wondering if anyone knew how to do this -
I have a database with a field for Id, LName, GName, DOB. In the LName field, some of the names have * placed after the names. Is there a way I can search for the entries in LName with the * in the record?
Thank you!
Liz
The following code accepts a couple of parameters and creates a temp table to hold unpaid schedule rows (like invoices). Then is takes the payment amount passed and starts paying the oldest ones first, until it runs out of money or pays a partial. When it pays it inserts a row in the applieds table with the schedule_ID, Receipt_ID (payment id), applied amount, and applied date.
What I need help with is: Say there is a partial payment from a previous payment, I need to pay that one, but only the unpaid part. Then continue to pay other schedule rows...
I appreciate any help,
@PaymentAmount money,@PledgeID Int,@Receipt_ID IntAS-- Get unpaid reminder rows for the passed in pledge id and put them into the temp tableDeclare @temp_oldest Table(PledgeSchedule_ID int,ReminderDueDate datetime,AmountDue money)INSERT INTO @temp_oldest SELECT PledgeSchedule_ID, PledgeDueDate, AmountDueFROM tblPledgeReminderScheduleWHERE (dbo.tblPledgeReminderSchedule.Pledge_ID=@PledgeID) AND (dbo.tblPledgeReminderSchedule.ReceivedDate IS NULL) -- AND (dbo.tblPledgeReminderSchedule.PledgeDueDate < GETDATE())WHILE((SELECT Count(*) FROM @temp_oldest)>0)BEGIN-- If the payment is greater or equal to the amount due for the current row, do thisIF(@PaymentAmount >= (SELECT Top 1 AmountDue FROM @temp_oldest))BEGIN-- Update the reminder row with todays dateUPDATE tblPledgeReminderSchedule SET ReceivedDate = GETDATE()WHERE PledgeSchedule_ID = (SELECT Top 1 PledgeSchedule_ID FROM @temp_oldest)-- Insert a row to track applied payment and reminder row associatedINSERT INTO tblPledgeReminderSchedule_Applieds (PledgeSchedule_ID,Receipt_ID,Applied_Amount,Applied_Date)(SELECT Top 1 PledgeSchedule_ID,@Receipt_ID,AmountDue,GETDATE() FROM @temp_oldestWHERE PledgeSchedule_ID = (SELECT Top 1 PledgeSchedule_ID FROM @temp_oldest))-- Subtract the amountdue from the paymentamount and reset itSET @PaymentAmount = (@PaymentAmount - (SELECT Top 1 AmountDue FROM @temp_oldest))ENDELSEIF(@PaymentAmount < (SELECT Top 1 AmountDue FROM @temp_oldest))BEGIN -- Insert a row to track applied PARTIAL payment and reminder row associatedINSERT INTO tblPledgeReminderSchedule_Applieds (PledgeSchedule_ID,Receipt_ID,Applied_Amount,Applied_Date)(SELECT Top 1 PledgeSchedule_ID,@Receipt_ID,@PaymentAmount,GETDATE() FROM @temp_oldestWHERE PledgeSchedule_ID = (SELECT Top 1 PledgeSchedule_ID FROM @temp_oldest))BREAKENDELSEIF @PaymentAmount = 0-- Delete all rows from temp tableDELETE FROM @temp_oldestELSE-- Delete only the current row from the temo tableprint @PaymentAmountDELETE FROM @temp_oldest WHERE PledgeSchedule_ID = (SELECT Top 1 PledgeSchedule_ID FROM @temp_oldest)END
I was just wondering if anyone could tell me how to do a search for a partial data match. Say one data field is 123, 234, 345, 456 and another is 111, 222, 333, 444 and another is 555, 666, 777, 888 and I want to search for the unique number 234 but not the whole number 123, 234, 345, 456 ... is there any way to do that or does every search have to be exactly like the data in the field?
Thanks for any help.
Dennis
In our database we have the concept of 'Companies' each company has an entry in a tblCompanyControls using a field lCompanyNumber to uniquely identify it.
Company specific data is then grouped within additional tables using this
lCompanyNumber.
Thus all the departments for a particular company (eg 4) exist in a table
tblDepartments with lCompanyNumber =4. The same applies for pensions, pay
elements, employees and so on.
Each employee has various attributes stored in several tables, thus the
main data is stored in tblEmployees with an lCompanyNumber to illustrate
the company they belong to. And a system generated lUniqueID that is the 1
to many relationship to tables such as tblEmployeePayElements,
tblEmployeePensionSchemes.
These in turn have a primary key that establishes a 1 to many with the
period data for pay elements etc.
What we want to do is replicate only the data for a specific company, for
tblEmployees, tblDepartments this looks straightforward as i just set a
filter like 'tblEmployees.lCompanyNumber = 4'. My problem is how do I
replicate just the tblEmployeePayElements for those employees that are in
the specific company as the table does not contain the lCompanyNumber. Can
you replicate a view? I an quite ignorant of replication and would really
appreciate some pointers. Note DRI is not in use.
I am are running SQLSERVER SP4 on WINNT SP3.
I am serious problem of partial update my query is
something like
bEGIN tRAN
declare cursor...
SElect * from tableA where flag = null
open cursor
fetch first...
while @@FETCH_STATUS = 0
BEGIN
UPDATE TABLE tableB ..
.
.
.
fetch next
END
CLOSE ...
DEALLOCATE..
COMMIT TRAN
The problem is the cursor select retrieves
says about 10000 rows, goes thru the
loop for 1000 rows and just terminates without
giving an error message,or rolling back
in case of errors, but comes out as successfully
completed.
I am at loss as what could be the problems..
any suggestions welcome..
Thanks in advance,
Balajee.
Could someone please help me? I am trying to pull in a partial string (the last six characters of the field, to be exact).
This is an example of my code:
select *
into #temp_2
from #temp_1 a, Server2.DBa.dbo.table2 r
where r.field1r = a.field1a and
r.field3r = a.field3a (field3a is where I need just the last 6 characters)
To be more specific:
r.field3r looks like 000884
a.field3a looks like 17445000884
So- I just want to pull in the 000884 off of a.field3a
Guys, i have a table that one of the columns (Email To) is
a concatenated list of email addresses separated by semi colons ";".
i.e.:
rrb7@yahoo.com;richard.butcher@sthou.com;administr ator@sthou.com
etc like that.
each row varies with one exception. administrator@sthou.com is in each one.
is there a simple way thru sql or T-SQL to delete that "administrator@sthou.com" part? or should i call each row individually into say, a VB.net form using a split with the deliminator ";"
and then looping thru and updating each row?
thanks again for any easy answer
rik
We have here 3 tables which are linked by Order number. there is one more table we need to use to get the Shipping zone code. This column however is 10 pos. ( the order number on that table)whilst the others are all 8. We want to join on MHORDR in the table MFH1MHL0, then we are done.
SELECT
ALL T01.OHORDD, T03.IHINV#, T01.OHORDT, T01.OHJOB3, T01.OHORD#,
T02.IDPRLC, T02.IDNTU$*(IDSHP#) AS EXTSHP, T02.IDPRT#
FROM ASTDTA.OEORHDOH T01 LEFT OUTER JOIN
ASTDTA.OEIND1 T02
ON T01.OHORD# = T02.IDORD# LEFT OUTER JOIN
ASTDTA.OEINHDIH T03
ON T01.OHORD# = T03.IHORD#
WHERE T01.OHOSTC = 'CL'
AND T01.OHORDD >= 20120101
ORDER BY T01.OHORD# ASC
I have been asked to see what I can recover from a development server whose database became suspect during a power failure.
One developer from another group who's time is limited tried to repair the database using checkdb, but it is still suspect.
There are no recent backups of anything whatsoever. Needless to say, we are lacking in DBA skills here. At this point, we don't care whether we get the data back, but we are desperate to recover the table definitions, user-defined functions and stored procedures -- if not all of them than most of them; if not most of them than some.
What are our options here?
Are their any good third-party tools to help us with this problem?
Hi all,I have 2 files containing Id numbers and surnames (these filesessentially contain the same data) I want to select distinct() andjoin on id number to return a recordset containing every individuallisted in both the files HOWEVER, in some cases an incomplete IDnumber has been collected into one of the 2 files -is there a way tojoin on partial matches not just identical records in the same way asyou can select where LIKE '%blah, blah%'??Is hash joining an option i should investigate?TIAMark
View 4 Replies View RelatedHi All,I have the following scenario. I have a table called Invoice. Thishas around 30 columns of which i have to do a retrieval based onfilter conditions on 10 columns. These filters need to be partialsearches i.e. for e.g the Customer name could be 'Arun', 'Parthiv','Aaron', now i should be able to search the customer as 'ar' and itshould return 'Arun' and 'Parthiv'. My concern is there are 10 columnson which this like '%x%' search has to be done and there willpractically be hudreds of thousands of rows. can anybody suggest me toimprove the performance of such a query. Currently what i am thinkinof isselect Id, Memo, .. FROM Invoice where CustomerName like '%' + @Name +'%' and etc.P.S. am using ASP.Net as the front end.
View 1 Replies View RelatedHello All,
I am looking for an expression for a group in a matric. I am trying to figure out how to group by the a certain amount of letters in a string. For example if I have the followong fields I am grouping...
Bob001
Bob
Robert005
Doug053
Doug100
Douglas
Barney001
Frank
I want to group it up as...
Bob
Doug
Barney
Frank
And then be able to summarize the results in the matrix.
Thanks in advance for any help
-Clint
Hi,
I have a file where there is a partial row at the end. It doesn't cause an error, but I get a "partial row" warning during execution.
What do most people do with these partial rows? Do they just ignore them as long as they don't cause errors? Or is it better to handle the partial row with a conditional split, for example?
Just wondering what other people's thoughts on this are. I tend to be of the "get rid of it" camp, but maybe that's overkill? Just looking for opinions, best practices.
Thanks
hi
I have 10 pages in my report and i want to export only 3 page .
any body can help me on this
Thanks
Pratik Mehta
Hi - I am using partial backup & restore on a Data Warehouse database currently in development.
When I recently tested the restore procedure I got the following error when trying to an online restore of one of the ReadOnly filegroups:
Msg 3125, Level 16, State 1, Line 1
The database is using the simple recovery model. The data in the backup it is not consistent with the current state of the database. Restoring more data is required before recovery is possible. Either restore a full file backup taken since the data was marked read-only, or restore the most recent base backup for the target data followed by a differential file backup.
I believe I received this message as the Filegroup I was attempting to restore had been set ReadWrite since it was backed up.
So - I am looking for a query to test that all my filegroup backups are consistent with the live database.
I think I can achieve this by checking the read_write_lsn & read_only_lsn values for the filegroup to restore are the same as the values in sys.master_files for the live database.
I am reading the lsn values for the backup from msdb.dbo.backupfile
Can anyone confirm this is the correct approach? or is there a better way to do this??
Many Thanks
I have a question, I keep getting the warning where the lookup found duplicate reference key values when caching reference data. It also says to switch over to partial or no cache mode. I switched to partial and and it took way longer to run my package. I have around 200,000 records right now but this table will continue to grow. I guess my question is which mode should I be using? I have another table that will have millions of records in it.
thanks,