Pass An Array To A Stored Proc?
Oct 13, 2000
In my front end, I have a procedure in which the operator selects multiple tickets. I have in mind to create a stored procedure which accepts its input parameter and plugs it into an IN() clause in an Update statement, something along these lines:
Update TicketInventory Set SalesID = 12345 Where TicketInventoryID IN( myInputParam );
Can I pass an array of Integers into a stored proc and have it work like this? Alternatively, I could pass a comma-delimited string containing the Integers. Could I plug that into the IN()? Or is there is yet another way to accomplish this?
TIA,
Arthur
View 1 Replies
ADVERTISEMENT
Mar 9, 2006
Can you pass an array into a stored proc or do we have to use indiviual parameters.
If we can, any code exmaple woudl be great.
Cheers
Chris
View 4 Replies
View Related
May 7, 2001
I have a two dimensional array in Front end (As for example Array contains 20 ECode and EmployeeName). I have a Stored Proc. where i have written a statement for inserting theses value in a table. so how i will pass this array to SP. Pls. give exmp. for Front end and SP also.
View 3 Replies
View Related
Oct 4, 2001
I thought that I had read somewhere that SQL 2000 allowed you to pass an array into a stored procedure. I've tried to look up some additional information pertaining to this but I haven't found anything. Did I dream this or can you pass an array to a stored procedure with SQL 2000? If you can please give me some information on this or where I can find some.
Thanks!
View 2 Replies
View Related
Jan 9, 2007
Dear All,
I am using sql2000, I want to know whether in stored procedure we can pass
array. Or is there any other solution to pass array of records
Please Guide Me
thanks
View 3 Replies
View Related
Jan 31, 2008
how to pass array(query parameter) into stored procudure. with this array i need to retrive data,with another array i have to retrive another set of data.
eg: suppose @param1 contains chapter1,Chapter2,Chapter3,
@param2 contains unit1.1,unit2.1,unit2.2,unit3.1,unit3.6
how can i do in stored procedure
love all
View 1 Replies
View Related
Sep 24, 2007
hii
I have a problem in when i pass xml as input to stored procedure. The problem i m facing is that :
Say i have a table which has id as primary key in it.Now in my sp i want to delete some rows from that table and in xml i am passin more than 1 id ( it can be four even).
But before deleteion i want to check that delete the with that ID iff the ID exists else raise error for the id w/c does not exist like 'This Id does not exist.'
what i want is to loop between the id's which are being passed as i/p to sp..
and delete the row if it exists elso diaplsy message this id does not exist..
somewhat like this
If Exists(Select ProfileName From Area52 Where Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) ))
Begin
Select * From Area52Docs
WHERE Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) )
DELETE FROM Area52Docs
WHERE Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) )
DELETE FROM Area52
FROM @XMLString.nodes('Area52') AS T(Item)
where Area52id=T.Item.value( '@Area52ID', 'uniqueidentifier')
select T.Item.value( '@Area52ID', 'uniqueidentifier') FROM @XMLString.nodes('Area52') AS T(Item)
Select 12
End
Else RaisError('This Record Does Not Exist',11,1)
the thing i want to do is as above..but its not workin..it works only for the first id int he list of id's
plzz do help...
View 3 Replies
View Related
Feb 9, 2008
Hi, I have created an insert stored procedure which inserts a userid into an sql server 2005 field of datatype uniqueidentifier.
What datatype would the parameter be in my c# code?
do i pass it in as an object datatype?
the code is below....
1 conn = new SqlConnection(ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString);
2
3 cmd = new SqlCommand("spInsKeyswap_history", conn);
4
5 cmd.CommandType = CommandType.StoredProcedure;
6
7 MembershipUser mu = Membership.GetUser(User.Identity.Name);
8
9 object gdUserID = mu.ProviderUserKey;
10
11
12
13
14
15 cmd.Parameters.Add("@user_title", SqlDbType.VarChar, 50);
16
17 cmd.Parameters.Add("@first_name", SqlDbType.VarChar, 20);
18
19 cmd.Parameters.Add("@last_name", SqlDbType.VarChar, 50);
20
21 cmd.Parameters.Add("@email", SqlDbType.VarChar, 50);
22
23 cmd.Parameters.Add("@birthday", SqlDbType.VarChar, 15);
24
25 cmd.Parameters.Add("@alternate_number", SqlDbType.VarChar, 50);
26
27 cmd.Parameters.Add("@msisdn", SqlDbType.VarChar, 50);
28
29 cmd.Parameters.Add("@call1", SqlDbType.VarChar, 50);
30
31 cmd.Parameters.Add("@call2", SqlDbType.VarChar, 50);
32
33 cmd.Parameters.Add("@call3", SqlDbType.VarChar, 50);
34
35 cmd.Parameters.Add("@new_sim_msidn", SqlDbType.VarChar, 50);
36
37 cmd.Parameters.Add("@dealer_id", SqlDbType.UniqueIdentifier);
38
39 cmd.Parameters.Add("@status_code", SqlDbType.Int);
40
41 cmd.Parameters.Add("@support_id", SqlDbType.Int);
42
43 cmd.Parameters.Add("@return_value", SqlDbType.Int);
44
45 cmd.Parameters["@user_title"].Value = txtTitle.Text.ToString();
46
47 cmd.Parameters["@first_name"].Value = txtFirstName.Text.ToString();
48
49 cmd.Parameters["@last_name"].Value = txtLastName.Text.ToString();
50
51 cmd.Parameters["@email"].Value = txtEmailAddress.Text.ToString();
52
53 cmd.Parameters["@birthday"].Value = txtBirthday.Text;
54
55 cmd.Parameters["@alternate_number"].Value = txtAlternate.Text.ToString();
56
57 cmd.Parameters["@msisdn"].Value = txtNew.Text.ToString();
58
59 cmd.Parameters["@call1"].Value = txtCall1.Text.ToString();
60
61 cmd.Parameters["@call2"].Value = txtCall2.Text.ToString();
62
63 cmd.Parameters["@call3"].Value = txtCall3.Text.ToString();
64
65 cmd.Parameters["@new_sim_msidn"].Value = txtOld.Text.ToString();
66
67 //get logged in users user_id from membership
68
69 cmd.Parameters["@dealer_id"].Value = gdUserID;
70
71 cmd.Parameters["@status_code"].Value = 1;
72
73 cmd.Parameters["@support_id"].Value = 0;
74
75
76
77 cmd.Parameters["@return_value"].Direction = ParameterDirection.ReturnValue;
78
79 cmd.ExecuteNonQuery();
80
81 int returnValue = (int)cmd.Parameters["@return_value"].Value;
82
83 conn.Open();
84
85
86
View 1 Replies
View Related
Jan 18, 2008
I'm in sql server mgmt 2005 and i highlighted a stored proc and clicked on "execute". I need to pass a null value in as the first param value to test this stored proc. what is the syntax, is below correct?
EXECUTE @RC = [SomeDataBaseName].[dbo].[sp_SomeStoredProcedure]
null
,'1234'
,1
View 3 Replies
View Related
Apr 8, 2008
I am trying to test a stored proc and I can't execute the stored proc when I use a Guid. Has anyboyd had the same problem. I right click in VS 2008 on the Stored proc click Execute and fill in the variables one of them is a Guid and no records are returned.
Here is my guid, I have tried '{0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2}', {0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2} and "0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2" no success. This stored proc might not work but I have had the same issue with other stored procs when I wanted to test them by using execute and using a Guid.
Testing with an int works fine when I try to Select the records by UserID which is a Guid no cigar. I have notice this behavier before is there a way around this problem, thanks newbie
View 3 Replies
View Related
Feb 11, 2015
I have a multiselect checkbox list in my UI. I pass the list items to my stored proc as comma separated parameter and then I have a function which converts this parameter to a table with separate rows.
E.g. : a,b,c,d
Converted to result table
result
a
b
c
d
I want to insert each row of the result table into another table. How to do that.
E.g., the table after the function is :
CREATE TABLE #result
(
Subject varchar(100)
)
insert into #result values ('a')
insert into #result values ('b')
insert into #result values ('c')
insert into #result values ('d')
So the pseudo code is something like
for each row in #result
insert row into another table
View 9 Replies
View Related
May 23, 2007
I created a custom function that accepts an array of strings as a input. I need to pass several fields from the dataset to this function as an array. How can I do this?
View 3 Replies
View Related
May 24, 2006
How does one pass into a Stored Procedure an array of numbers to be used in an IN clause? If I pass "1,2" in a VARCHAR, the stored procedure sees only the first number (1 in this case).
I'm using VB and ADO.NET, but I don't know how to set up the stored procedure for an array. Is there a parsing function to do this?
CREATE PROCEDURE TestInClause( @TeamList VARCHAR)ASSELECT Name FROM Teams WHERE TeamID IN (@TeamList); /* sees only 1st number */GO
View 2 Replies
View Related
Mar 4, 2014
I am trying to find out a way to pass an array of pbaseid's to a function.I have a function defind something like this
Fport(@portfoliobaseid, @reportingcurr, @rowno,@todate)
(
returning a table
)
trying to execute it like this but its giving error related to subquery must return single value
select * from Fport((select pbaseid from dbo.pbaseid),'us',1,'12/31/2013')
I think i need to find a way to pass this pbaseid one by one but i dont know how to do this ...
View 1 Replies
View Related
Jul 20, 2005
I have ...CREATE PROC InvoiceDeleteExample2(@InvoiceList1 VARCHAR(255),@InvoiceList2 VARCHAR(255) = '',...@InvoiceListN VARCHAR(255) = '')AS....GOI would like....CREATE PROC InvoiceDeleteExample2(SELECT * FROM table;)AS....GOI hope help... thx
View 1 Replies
View Related
Jun 13, 2006
I keep running into a problem with the debugger freezing up. I'm trying to pull results from a query into an array (not more than 10 rows)
cmd.ExecuteReader();
while (rdr.Read() == true) {
letter = rdr[0].ToString();
i += 1;
}
if I comment out the "letter = rdr[0].ToString();" portion of code, the project runs fine. With that code there, I can not step into the proc from the SQL test script. No errors are raised. VS just freezes.
View 1 Replies
View Related
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Sep 27, 2000
I am writing a (very simple) stored procedure that counts records on a table. The stored proc is as follows:
------------------------------------------
CREATE PROCEDURE GetRecordCount
@TableName varchar(30),
@NumRecs int OUTPUT
AS
DECLARE @sqlcmd varchar(250)
SET @sqlcmd = 'SELECT @NumRecs = COUNT(email)
FROM ' + @TableName + 'WHERE Include = "Y"'
EXEC (@sqlcmd)
------------------------------------------
The intention is to return variable @NumRecs. I am calling the routine from Query Analyzer as follows:
DECLARE @MyNumber int
EXEC GetRecordCount "MYTABLE", @NumRecs = @MyNumber OUTPUT
PRINT @MyNumber
When I execute the above line, I get an error message:
Server: Msg 137, Level 15, State 1, Line 0
Must declare the variable '@NumRecs'.
If I replace the "SET @sqlcmd = .." AND "EXEC(.." with:
SELECT SELECT @NumRecs = COUNT(email)
FROM MyTable etc.
i.e. without passing the table name, the process works fine. How can I construct an sql command using a parameter?
View 2 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Jun 1, 2006
Can any one help me with a sample code, which can take an array of
elements as one of it's parameters and get the value inserted into a table in a stored procedure.
Thanks in advance
vnswathi.
View 5 Replies
View Related
Feb 20, 2003
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
View 1 Replies
View Related
Jan 13, 2006
Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
View 5 Replies
View Related
Jan 20, 2004
Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
View 14 Replies
View Related
Aug 30, 2007
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
View 2 Replies
View Related
Apr 1, 2004
I want to pass and array of ids to a procedure for inserting i a relation table.
I found some examples in other posts, but had problems getting them to work.
I just want to pass a parameter with value like '1,45,89' to the procedure, then loop through it to insert the relations.
(I´m using sql server 2000), had some problem with examples with strpos then.
Any hints ?
peace.
View 2 Replies
View Related
Jul 13, 2004
This is not obvious to me...
As far as i can tell, you cannot pass an array (or structured) parameter to a stored procedure...
Ok, this means when you have to store data for an item and its sub-items (e.g. a product and its - say- version specific infos) you cannot code all the logic into a single procedure. You need to code it into your DAL, where you first insert then loop to sub-insert...
Is this correct?
Is there any other way to approach the problem?
Thanks a lot. -julio
View 3 Replies
View Related
Jul 22, 2004
How would I go about storing (1 column) database results in a Array?
And then how would I go about extracting the elements from the Array?
View 4 Replies
View Related
Feb 17, 2005
How to do this ?
==============================
CREATE procedure dbo.AddTb2FromTb1
@Tb1No nvarchar(1000)
as
insert into Tb2 (*)
select * from Tb1
where Tb1 IN (@Tb1No) /* How to Passing an Array to a Stored Procedures ??? */
==============================
dbo.AddTb2FromTb1 'No001' is Work !
dbo.AddTb2FromTb1 'No001,No002,Bo003' is not Work !
View 3 Replies
View Related
Apr 8, 2005
i doing an online shop project which have an shoppingcart and it stored database.
and i have the situation like this.
the products have properties such as size, color . and customers
can buy a product with particular size or color. and i have
the shopping cart table structure and data like following
Id(primary key) CartId
productId size
color quantity
1
1
1
S red
10
2
1
1
S black
2
3
1
1
S blue
3
4
1
1
M red
5
5
1
1
L
blue 2
all the data above is i image the customer may inputed. And my
problem is how to use an stored procedure to updata above record
when a customer buy the same product which is one of the product from
above(have same productId, size, color)
and i try to use the following code but it didn't work
<code>
create procedure shoppingcart_add_item
( @cartId int,
@productId int,
@size nvarchar(20),
@color nvarchar(20),
@quantity int
)
AS
DECLARE @countproduct
DECLARE @oldsize
DECLARE @oldcolor
select @countproduct=count(productId) FROM shoppingcart WHERE productId=@productId AND cartId=@cartId
select @oldsize=size,@oldcolor=color FROM shoppingcart WHERE productId=@productId
IF @CountItems > 0 and @oldsize = @size and @oldcolor = @color
UPDATE
ShoppingCart
SET
Quantity = (@Quantity + ShoppingCart.Quantity)
WHERE
ProductId = @ProductId
AND
CartId = @CartId
ELSE /* New entry for this Cart. Add a new record */
INSERT INTO ShoppingCart
(
CartId,
ProductId,
Quantity,
color,
size
)
VALUES
(
@CartId,
@ProductId,
@Quantity,
@size,
@color
)
</CODE>
and the result from this stored procedure is not what i want, what i
try to say is can i stored all the size and color in @oldsize and
@oldcolor array. then loop through the array to get the one i
want??????
somebody get any idea??? or don't know what i am talking about?
View 1 Replies
View Related
Aug 8, 2000
I just want to Know how to create an Array in a stored procedure. Please can you give the syntax and any Example.
View 1 Replies
View Related
Feb 14, 2008
how to pass array of values in stored procedure..
View 2 Replies
View Related
