Pass Large Data Into Stored Procedure Using Execute SQL Task

Jan 15, 2008

Dear All!
I use a "Execute SQL Task" to call a Stored Procedure. My Stored Procedure have an input parameter with type: ntext. And in "Execute SQL Task", I set variable in Parameter Mapping as following:

Variable Name: User::xmlDocument (this variable is a String to store xml data)
Direction: Input
DataType: NVARCHAR
ParameterName: 0


When length of "User::xmlDocument" is too large then error is happen but on the contrary, "Execute SQL Task" run successfully.
So, Can you show me how to pass large data into stored procedure using "Execute SQL Task"?
I am looking forward to hearing from you
Thanks

View 20 Replies


ADVERTISEMENT

SSIS Hard Time Getting Back XML Return Data From Stored Procedure Call Executed By Execute SQL Task

Aug 9, 2006

I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.

I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.

When I execute the task, I get the following error message.

[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

I also tried mapping the parameter as XML type, but that didn't work either.

If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.

Thanks

View 10 Replies View Related

Integration Services :: Stored Procedure In Execute Task Fails But Task Does Not Fail

Jul 1, 2015

I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?

View 3 Replies View Related

Execute SQL Task – Output Parameter On Stored Procedure Causes Task To Fail.

Dec 2, 2005

I have a SQL Task that calls a stored procedure and returns an output parameter.  The task fails with error "Value does not fall within the expected range."   The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms]             @InParm INT ,             @OutParm INT OUTPUT as Set @OutParm  = @InParm + 5   The task uses an OLEDB connection and has a source type of Direct Input.  The SQL Statement is Exec TestOutputParms 7, ? output    The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm  

View 7 Replies View Related

Transact SQL :: GO Statements To Execute Large Stored Procedure In Batches

Jun 19, 2015

I want to include GO statements to execute a large stored procedure in batches, how can I do that?

View 9 Replies View Related

How To Pass Values To A Stored Procedure Parameters By Using Script Task

Nov 27, 2007



Hi All,

I have One package that it contains one Execute SQL task in that i have placed a Stored procedure .
Now i want to pass values to Stored procedure parameters from a databse table by dynamically .For this i am trying to use " Script task "
How can i pass that table column values to that stores procedure thru using Script Task?

Regards,
Maruthi..

View 3 Replies View Related

Running A Stored Procedure Using The Execute Sql Task

Mar 13, 2001

Hi

Is it possible in my DTS Package to check if a stored procedure which I'm executing from the Execute sql task icon can be tested for failure?

View 2 Replies View Related

How To Call Stored Procedure In Execute SQL Task

Jan 8, 2008

Dear all!
I have a SSIS packet. I declare a parameter that have scope of packet. I want to pass this parameter into a stored procedure and call this stored procedure from "Execute SQL Task".
Please help me how to call stored procedure with parameter from "Execute SQL Task".
Thank you very much

View 4 Replies View Related

Executing Stored Procedure With Parameters Using Execute Sql Task

Jul 12, 2006



Hi ,

I am trying to exectue a stored procedure through execute sql task which takes two input parameters table name and filegroup to create a table and it also returns a value.

i am using the oledb connection

but i am getting the following error



[Execute SQL Task] Error: Executing the query "declare @rtn_value int exec spm_Utopia_FinanceUsage_Create_MonthlyTable ?,? select @rtn_value as rtn_value " failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.



i tried with ado.net connection by directly giving the parameter names.

it will create a table but the the table name is something different from what i specified



Please do help as soon as possible



Thanks

Manish



View 2 Replies View Related

How Do I Use Pass Data To/from Stored Procedure

May 2, 2006

Hello,I read an article on how to use Yahoos API to GeoCode addresses. Basedon the article I created a stored procedure that is used as follows:SPGeocode '2121 15st north' ,'arlington' ,'va' ,'warehouse-test'Returns:Latitude Longitude GeoCodedCity GeoCodedState GeoCodedCountryPrecision Warning----------- ---------- ------------- ------------- ------------------------------ --------38.889538 -77.08461 ARLINGTON VA USPrecision Good No ErrorIt returns Latitude and Longitude and other information. Works great.In conjunction with Haversine formula, I can compute the distancebetween two locations if I know the Lat and Long of the two points.This can start to answer questions like "How many students do we havewithin a 10 mile radius of Location X?"(Marketing should go nuts over this :)My question is how can i use my data from a table and pass it to theSPGeocode via a select statement?The table I would use is:CREATE TABLE "dbo"."D_BI_Student"("STUDENT_ADDRESS1" VARCHAR(50) NULL,"STUDENT_ADDRESS2" VARCHAR(50) NULL,"STUDENT_CITY" VARCHAR(50) NULL,"STUDENT_STATE" VARCHAR(10) NULL,"STUDENT_ZIP" VARCHAR(10) NULL);This is so new to me, I am not even sure what to search.TIARob

View 4 Replies View Related

To Pass Data To An Stored Procedure Inside Sql Server

Feb 2, 2004

I want to use a stored procedure inside Sql Server from my aspx page so that the data entered in the form goes to the database after submit.

My stored procedure (inside the SQL Server) inserts several fields in a table and it returns two variables.
What code I need to write in order to pass the data from the form to the stored procedure inside the Sql Server? And to store the two returned values?


Thanks

View 7 Replies View Related

How To Pass A XML Data Parameter To An SQL 2005 Stored Procedure

Oct 12, 2005

How to pass a XML data parameter to an SQL 2005 Stored Procedure
I hope to insert a xml data into an typed xml column in SQL 2005.
1. I can run the Code 1 correctly.
2. I hope that I can pass a XML data parameter to an SQL 2005 Stored Procedure, So create the Code 2. but I get the error below:XQuery [cw_bookmark.Bookmark.modify()]: Only non-document nodes can be inserted. Found "xs:string ?".
3. I create the Code 3, but I get the error below:XQuery [cw_bookmark.Bookmark.modify()]: ',' or ')' expected 
4. I create the Code 4, but I get the error below:XQuery: SQL type 'xml' is not supported in XQuery.
 
//--------------------------Code 1-------------------------------------create procedure Hellocw_InsertBookmark40@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert <x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 1-------------------------------------
//--------------------------Code 2-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml varchar(80)='<x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>'asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert sql:variable("@Insertxml")as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 2-------------------------------------
//--------------------------Code 3-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml varchar(80)='<x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>'asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert cast(sql:variable("@Insertxml") as xml)as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 3-------------------------------------
//--------------------------Code 4-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml xmlasupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert sql:variable("@Insertxml")as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId
//--------------------------Code 4-------------------------------------

View 2 Replies View Related

Pass All Data In A File As A String Into A Stored Procedure

Jul 5, 2007

Hi,
Using SSIS 2005 how is it possible to loop through a folder on the network, look at each file, pass the data inside each file as a string into a stored procedure.
Thanks

View 1 Replies View Related

How To Pass Command Line Parms To The Execute Package Task

Oct 2, 2006

I have a ForEachLoop parent pkg that reads thru the file system of dtsx to be executed.

I would like to pass CLI parms to the command itself (dtexec). I'm not looking at passing values to the child pkgs but rather additional command line values such as:

/CONFIGFILE "C:myconfig.dtsConfig.



In my expression builder for the PackageName I added the additional string but during the execution, the reference to my dtsconfig is ignored without any errors and the child pkg runs using the default values provided at design time.

@[User::PackageToRun] + " /CONFIGFILE C:\myconfig.dtsConfig ".



How does one add additional CL values during the runtime for Execute Package Task?



Thanks,

Anatole

View 3 Replies View Related

Integration Services :: Pass Parameters To SSIS Execute Process Task?

Nov 3, 2015

Got a powershell script to split a large XML file to split in smaller chunks. I have Execute ProcessTask in SSIS with: 

Executable: %windir%system32WindowsPowerShellv1.0powershell.exe

argument: -ExecutionPolicy ByPass -command ". 'C:WorkspacesSplitToytPMFile.ps1'"

I need to pass File Name as parameter to the PS script. I tried using the StandardInputVariable but it doesn't work. 

View 11 Replies View Related

Can I Use A SqlDataSource Control Exclusively To Pass Data To A Stored Procedure For Execution (insert/update Only)?

Feb 28, 2008

Hi,
I'm reasonably new to ASP.NET 2.0
I'm in my wizard_FinishButtonClick event, and from here, I want to take data from the form and some session variables and put it into my database via a stored procedure.  I also want the stored procedure to return an output value.  I do not need to perform a select or a delete.
For the life of me, I can't find a single example online or in my reference books that tells me how to accomplish this task using a SqlDataSource control.  I can find lots of examples on sqldatasources that have a select statements (I don't need one) and use insert and update sql statements instead of stored procedures (I use stored procedures).
I desperately need the syntax to:
a) create the SqlDataSource with the appropriate syntax for calling a stored procedure to update and/or insert (again, this design side of VS2005 won't let me configure this datasource without including a select statement...which I don't need).
b) syntax on how to create the parameters that will be sent to the stored procedure for this sqldatasource (including output parameters).
c) syntax on how to set the values for these parameters (again...coming from form controls and session variables)
d) syntax on how to execute, in the code-behind, the stored procedure via the sqldatasource.
If anybody has sample code or a link or two, I would be most appreciative.
Thank you in advance for any help!

View 5 Replies View Related

Data Migration Script - Execute Stored Procedure Set-based

Sep 18, 2013

I am writing a number of data migration scripts, like the (simplified version) below

Code:
INSERT INTO newDatabase.dbo.DaDestinationTable(col1, col2, col3)
SELECT col1,
col27,
col13
FROM OldDatabase.dbo.DaSourceTable

There are no validation rules defined in the database (don't ask why), only in the program code. Because of the absence of validations in the database, the data migration scripts could violate business rules (NOT NULL, FK violations, domain values in a column, ...).

A solution could be that both the program and the data migration call the same stored procedure to insert records in the destination table, so the validation rules must only be defined in one place (the stored procedure).

I have never used stored procedures in a "set-based" situation. Is this even possible? The only solution I see is to call those sp's in a loop (WHILE or CURSOR). Something like

Code:
SET @my_id = -1
SELECT @my_id = MIN(id)
FROM OldDatabase.dbo.DaSourceTable
WHERE id > @my_id
WHILE @my_id IS NOT NULL

[Code] ....

For each record, the table OldDatabase.dbo.DaSourceTable is hit twice, once to get the next id (@my_id), once to get the column values. I could combine both with one SELECT script by using ROW_NUMBER(), but I doubt that that will perform faster.

I only work set-based, I have barely ever used a WHILE loop, let alone a CURSOR. What the consequences will be on performance. There are millions of records that have to be migrated.

I was thinking of CROSS APPLY, but you can't use that in combination with a SP.

View 6 Replies View Related

How Do I Call A Stored Procedure To Insert Data In SQL Server In SSIS Data Flow Task

Jan 29, 2008



I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task.
I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert.
Thanks

View 6 Replies View Related

Can't Pass In GUID When Using Execute Stored Proc In VS 2008

Apr 8, 2008

I am trying to test a stored proc and I can't execute the stored proc when I use a Guid. Has anyboyd had the same problem. I right click in VS 2008 on the Stored proc click Execute and fill in the variables one of them is a Guid and no records are returned.


Here is my guid, I have tried '{0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2}', {0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2} and "0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2" no success. This stored proc might not work but I have had the same issue with other stored procs when I wanted to test them by using execute and using a Guid.

Testing with an int works fine when I try to Select the records by UserID which is a Guid no cigar. I have notice this behavier before is there a way around this problem, thanks newbie

View 3 Replies View Related

T-SQL (SS2K8) :: Take Data And Execute Stored Procedure With Parameters - Remove Cursor

Jun 26, 2014

I currently have a process that has a cursor. It takes data and executes a stored procedure with parameters.

declare @tmpmsg varchar(max)
declare @tmpmsgprefix varchar(max)
declare @cms varchar(20)
create table #tmpIntegrity(matternum varchar(10),ClientName varchar(20))
insert into #tmpIntegrity(matternum,ClientName)

[Code] ....

Output from code:

The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4,
The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,
The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,
The following Client4 accounts have A1 value and a blank A2 field. Accounts:

Desired output (no trailing comma):

The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4
The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3
The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3
The following Client4 accounts have A1 value and a blank A2 field. Accounts:

Next, how do I call the stored procedure without doing it RBAR? Is that possible?

execute usp_IMessage 832,101,@tmpmsgprefix,@tmpmsg,','

View 5 Replies View Related

Transform Data Task Vs Stored Procedure

Mar 9, 2007

Hi everybody

I'm still trying to learn the advantage of having stored procedures. I have a DTS that uses a Transform Data Task to append the result of a view into a table. All operations are done locally in the server.

Do I have any advantage if I write a stored procedure to insert the view into the table, and then call the stored procedure in the DTS, in stead of using the Transform Data Task ?


Thanks in advance for your thoughts
ds9

View 1 Replies View Related

Compare Performance (Execute SQL Task Insert And Data Flow Task)

Mar 12, 2008



I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.

I would like know which method is faster:


Use Execute SQL Task to insert the result set to the target table

Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?

Thanks.

View 7 Replies View Related

How To Pass Parameters To A Package Using A Execute Package Task

Jan 19, 2008

Hi,

I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?

Thanks in advance.

View 16 Replies View Related

SQL Server 2012 :: CLR Procedure Takes Ages To Pass TVP To Stored Procedure?

Jan 21, 2014

On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.

The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.

For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.

I changed the procdure to do nothing (return 1 in first line).

So with all parameters set from

command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end

it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.

When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)

SP:StmtCompleted -- Encrypted Text.

As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.

View 5 Replies View Related

How To Pass Parameters Into Data Flow Task

Jul 18, 2007

I have a DTS package of SQL server 2000 which has two "Execute SQL Task", which gets maximum ID (call it maxID1) from table1 in mysql and maximum ID (call it maxID2) from table 2 in sql server. Those 2 as global variables passes into a data flow which grabs all data from mysql's table1 with its ID > maxID2 and ID <= maxID1 and insert into SQL server table3. This package is working so far.



My question is how to achieve the same thing in SSIS? I created two "Execute SQL Task", which will get maxID1 and maxID2, and one "Data Flow Task". But how to pass those 2 parameters into that "Data Flow Task" without using "Script Task"?



Anyone could help? Thanks!

View 4 Replies View Related

Urgent. Output Columns Are Not Appearing When I Use OLEDB Data Source With An Oracle Stored Procedure In Dataflow Task

Nov 12, 2007

I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?

When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.

View 9 Replies View Related

Store Procedure Fails In Execute SQL Task

Mar 19, 2008

I have a Execute SQL Task that calls a stored procedure. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. It has a date parameter, but hard coding the date parameter does not work either. I checked the permissions on the Stored Procedure and SQL Agent, which are ok. When I change BypassPrepare to True, the query will execute and insert the rows to the required table. If someone has an explanation for this, I would appreciate some sql enlightenment. Thanks.

Dan

View 6 Replies View Related

How To Pass A Variable To The Stored Procedure?

Feb 22, 2007

Hi,
i need to insert a record 1 or more times, depending of a variable in code-behind:dim amount as integeramount= value (e.g. 3)
My problem is: how to pass that variable to the stored procedure?I tried with this but nothing happens:
comd.Parameters.Add("@amount", SqlDbType.NVarChar, 10).Value = amount_of_details
Maybe is my stored procedure wrong?
Thanks
T.
Here is it:----------
ALTER PROCEDURE dbo.insert_table (@field1 nvarchar(10),...)ASDeclare @iLoopNumber intDeclare @amount intBEGIN TRAN
SET @iLoopNumber = 1
SET @amountr
While (@iLoopNumber <= @amount)
BEGIN
INSERT INTO table(field1,...)
VALUES (....))
 SET @iLoopNumber = @iLoopNumber +1
End
COMMIT TRAN
 

View 3 Replies View Related

Pass Parameters Into Stored Procedure?

Aug 11, 2007

How do I pass values from my ASP.NET page code into my Stored Procedure, to become parameters to be used in my Stored Proc?
Much thanks

View 2 Replies View Related

Can't Pass 0 In Stored Procedure Parameter

Sep 19, 2005

Hi I have an if clause in my code to add the final parameter value to send to the database.
If Page.User.IsInRole("MICMS") Then
    cmdCheckUser.Parameters.Add("@C_ID", 0)
Else
    cmdCheckUser.Parameters.Add("@C_ID", Session("C_ID"))
End If

If  the user is in the role, the error is triggered saying that @C_ID
is expected by the stored procedure. If i then change the value from 0
to 10, the stored procedure works fine.Is there any reason that the stored procedure is failing when the value 0 is used and not when any other value is used?Thanking you in advance.

View 1 Replies View Related

How To Pass Xml File To A Stored Procedure

Nov 30, 2005

hi,i am passing a xml file name to the stored procedure.   the SP  parses the file. but it is giving the error' INVALID AT THE TOP LEVEL OF THE DOCUMENT 'I expect this because of + and - in the xml file bafore the parent tags.how can i do the parser to eliminate these.

View 1 Replies View Related

How Do You Pass A Parameter To A Stored Procedure

Mar 9, 2006

How can I pass a parameter to a stored procedure using Visual Web Developer 2005?  I have created a SQLDataSource that calls the SP. 
Thanks
--R

View 1 Replies View Related

How Array Will Pass To Stored Procedure

May 7, 2001

I have a two dimensional array in Front end (As for example Array contains 20 ECode and EmployeeName). I have a Stored Proc. where i have written a statement for inserting theses value in a table. so how i will pass this array to SP. Pls. give exmp. for Front end and SP also.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved