Pass Multi-values In A Single Parameter For Stored Procedure
Apr 16, 2013
I got issue when passing multiple values to a single parameter. Here is my stored procedure as following:
CREATE PROCEDURE [dbo].[School]
@Grade AS varchar(50),
@Class As varchar(50)
AS
BEGIN
SELECT Name, Grade, Class
FROM School
WHERE Grade = (IsNull(@Grade, Grade)) AND Class IN (IsNull(@Class, Class ))
END
In the front end, I got multiple values for Subject parameters such as Math, English, Reading, etc... in a specified class. How do I can modify my above stored procedure to receive multiple values for a single parameter.
I have a stored procedure "spDetailsByDay" which takes parameters @StartDateTime as datetime, @Day as int, @Hour as int, @Value1 as varchar(20), @value2 as varchar(20)
My report Parameters are StartDateTime as DateTime, Day as integer, Hour as integer, Value1 as string, Value2 as string, ReportType as string
we can  assign one parameter value for each excecution of  [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??) 2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
ALTER PROC [dbo].[sp_GetInvitationStatusTest] ( @invited_by NVARCHAR (50) ) AS BEGIN -- SELECT * FROM dbo.Merck_Acronym_Invitations WHERE invited_by=@invited_by select distinct t1.invited_isid as 'ISID', t1.invited_name as 'NAME',t1.invitation_status as 'STATUS',
[Code] ....
If you look at the where clause i have invited by , i get the desired output if i just provide 1 name in the execution such as exec [dbo].[sp_GetInvitationStatusTest] 'marfilj' But my requirement is to make the procedure work with more than one input variable such as exec [dbo].[sp_GetInvitationStatusTest] 'marfilj','sujith' now i should get the output for 2 people but if i run this i receive the following error Procedure or function sp_GetInvitationStatusTest has too many arguments specified.
how to make my procedure work with more than 1 input variable?
Hi I have an if clause in my code to add the final parameter value to send to the database. If Page.User.IsInRole("MICMS") Then cmdCheckUser.Parameters.Add("@C_ID", 0) Else cmdCheckUser.Parameters.Add("@C_ID", Session("C_ID")) End If
If the user is in the role, the error is triggered saying that @C_ID is expected by the stored procedure. If i then change the value from 0 to 10, the stored procedure works fine.Is there any reason that the stored procedure is failing when the value 0 is used and not when any other value is used?Thanking you in advance.
In the snippet below, ExecuteSqlString is a stored procedure that accepts one parameter. SelectChangeDropdownRowsource is a function in my code behind page that generates the string I want to pass. I can't seem to find the correct syntax to get it to work. The way it is show below, the error comes back about incorrect syntax near ')' . Is this doable? <asp:SqlDataSource ID="ChangeInfo" runat="server" ConnectionString="<%$ ConnectionStrings:xxx %>" DataSourceMode="DataReader" ProviderName="<%$ ConnectionStrings:xxx %>" SelectCommandType=StoredProcedure SelectCommand="ExecuteSqlString"> <selectparameters> <asp:parameter name="sqlString" Type=String DefaultValue=SelectChangeDropdownRowsource()/> </selectparameters> </asp:SqlDataSource>
hi, i searched a lot to find how to pass an orderBy parameter finally i used a case block in my code and it works now how can i add a second parameter for ascending and descending order(@sortAscOrDesc) when i use it after the end of case statement i get error here is my sp:CREATE PROCEDURE [userPhotos] @userID int,@orderBy varchar(100) ASSELECT ID,UserID,Photo,ALbumID,Title,views,date_added from userAlbumPic where userID=@userID and albumID=0 order by case @orderBy when 'date_added' then date_added when 'views' then [views] else date_added end GO
Either method is in the “ASPX� file This is a DataSource for a “DetailsView� which has on top of “DeleteCommand� an “InsertCommand� a “SelectCommand� and an “UpdateCommand�. It is related to a GridView and the “@DonationRecID� comes from this GridView. Method 1. Using an SQL Query – this works fine <asp:SqlDataSource ID="donationDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:FUND %>" DeleteCommand="DELETE FROM [Donations] WHERE [DonationRecID] = @DonationRecID"> Method 2. – using a stored procedure – this bombs because I have no clue as to how to pass “@DonationRecID� to the stored procedure "Donations_Delete". <asp:SqlDataSource ID="donationDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:FUND %>" DeleteCommand="Donations_Delete" DeleteCommandType="StoredProcedure"> How do I pass “@DonationRecID� to the "Donations_Delete" stored procedure? Does anyone have an example of how I can do this in the “ASPX.CS� file instead.
sSQL = "spBPT_Fuel_Set_Status_Approved" cmdDailyPrices.CommandText = sSQL cmdDailyPrices.Parameters.Add("@user", "Philippe") cmdDailyPrices.Parameters.Add("@verbose", "0") cmdDailyPrices.Parameters.Add("@Day_1_add", rowBand1.Cells(DayParameters.AddFactor).Value) cmdDailyPrices.Parameters.Add("@Day_1_multiply", rowBand1.Cells(DayParameters.MultiplyFactor).Value) cmdDailyPrices.Parameters.Add("@Day_2_add", "NULL") cmdDailyPrices.Parameters.Add("@Day_2_multiply", "NULL") For @Day_2_add and @Day_2_multiply parameters I want to pass the value as NULL not string "NULL" could you please let me know how to do this?
hi,i have created a stored procedure to read xml dataCREATE PROCEDURE InsertXML(@xml varchar(1000)) AS DECLARE @XmlHandle intEXEC sp_xml_preparedocument @XmlHandle output,@xmlinsert into Employee(Name,ID,Sal,Address) (SELECT Name,ID,Sal,AddressFROM OPENXML (@XmlHandle, 'emp:EmployeeDetails/emp:Employee',2) WITH (Name varchar(30) 'Name', ID int 'ID', Sal int 'sal', Address varchar(30) 'Address'))EXECUTE sp_xml_removedocument @XmlHandlebut it is taking only xml text as input.but i want to send the file name as input.how to do it.
I am using SQL Reporting Services to generate reports. I am calling the stored procedure from the reporting services. The procedure has parameters which take null. I am stuck with passing null to the parameter from the reporting services. I shows the error and the report is not generated. Could you please suggest the way to pass null to the stored procedure parameter from the SQL Reporting Services.
Hello, I was wondering if you could help resolve a simple question - namely how to input a type text value as a parameter to a stored procedure, which expects that type of input.
Text type variables are not allowed and casting to varchar in this case will not work as the input will be far longer than 8000 characters.
There is a stored procedure spoc_updateTheater that accepts the state and location id and runs a set of sql statements against the theater table. However i want this to run for all the locations in a state one by one. There are some 700 locations in 45 states. How do i pass the location and state id one by one to the stored proc. Can i call this from a commandline or run it as batch process?
I am wondering if some of you T-SQL pros encountered a situation when you have a parameter that can consist of multiple strings. For instance, I have a stored procedure called dbo.usp_CalculateHeadcount that accepts two parameters such as @Term, and @AcadLevel.
It works great when my parameters are two single strings; 'Fall2007', 'UG'. But let say I have one more term such as 'Fall2006' and want to pass it to a stored procedure, the problems start to appear.
It doesn't work because I have added an extra string and stored procedure thinks it is another parameter. Is there a way to handle problems like the one above?
hi friends,i need to select some of the employees from the EmpMaster using in clause. I tried to pass a string with the comma delemeters. it didn't produce all the records except the first in that string.shall i try with string functions in TSQL or any other options? Thanks and Regads,Senthilselvan.D
Currently i am working in a project of report generation in MS ACCESS.
The tables are in sql server 2000. I have to write stored proc in ms access.
Illustration: I am having a stored proc as follows
name: myproc ------------------- Create procedure my_proc @f1 char(1), @f2 char(5) As select * from table1 where field1=@f1 and field2=@f2 ________________________________________________ and calling proc name: call_myproc
execute my_proc 'A','2004'
If i am getting the vales of field1/@f1 and field2/@f2 from forms in ms access.
How is it possible to pass values from ms access FORMS to a calling stored procedure.
I have followed the way of creating and executing the stored procedure as given in the article as follows. http://www.databasejournal.com/features/msaccess/article.php/10895_3363511_1
As per the given link. They did not give values dynamically.
Hi, I need to automate the procedure of selecting column with numeric and passing those column values as string to another stored procedure.
Here is sample code : CREATE procedure procdeure1 @Utility varchar(50) WITH RECOMPILE as if @Utility='Electricity' begin IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'gmmers1') DROP TABLE gmmers1 IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'gmmers2') DROP TABLE gmmers2 create table gmmers1(sitecode varchar(15), Gen_Electricity_Usage bigint ) create table gmmers2 (gmmerssitecode varchar(15), Gmers_Electricity_Usage bigint ) insert into gmmers1 Select site.Sitecode,sum(isnull(AcctRptdata.ElectricityUse,0)*factor) as 'Electricity Usage' From GEN..AcctRptdata AcctRptdata, GEN..site site,SuperAccesslevels.dbo.convfactor,SuperAccesslevels.dbo.countrysettings Where ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and --((AcctRptdata.Year*100)+AcctRptdata.Month) < year(DATEADD(m,-1, GetDate()))*100+month(DATEADD(m,-1, GetDate())) and ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and ((AcctRptdata.Year*100)+AcctRptdata.Month) <= 200707 and site.idsite = AcctRptdata.siteid and site.sitecode not like ('C%') and len(sitecode ) = 8 and AcctRptdata.idsvc in (100) and SuperAccesslevels.dbo.convfactor.[Default] = SuperAccesslevels.dbo.countrysettings.IdUnitElec and SuperAccesslevels.dbo.countrysettings.IdCountrySetting = Site.IdCustomerSetting and [user] = 1 and site.Sitecode not like '%B%' and site.sitecode not like '9999%' and AcctRptdata.ElectricityUse >0 --Added on 16th Aug and site.sitecode in (select left (sitecode,8) from GEN..site where len(sitecode) >8)--= 11) --and site.sitecode in (select left(sitecode,8) from gmers_prodn..facility_data where len(sitecode) = 11) Group by site.Sitecode having sum(AcctRptdata.ElectricityUse*factor) > 0 Order by site.Sitecode
insert into gmmers2 select left (sitecode, 8) BU, sum(isnull(KWh_Purchased_Quantity, 0 )) as 'electric use' from gmers_prodn..electricity_data where sitecode in --(select sitecode from facility_data where left (sitecode ,8) in (select sitecode from gen..site where sitecode not like 'C%' and len(sitecode ) > 8 ) -- and len (sitecode) = 11) and rpt_dt >= '2005-11-01' and rpt_dt < '2007-08-01' --and sitecode like 'A0916323%' and sitecode not like '%B%' and left(sitecode,8) not in ('N0010024','N0010088','N0010101','N0010173', 'N0010373','N0010447') and sitecode not like '9999%' group by left (sitecode, 8) order by left (sitecode, 8) -- yyyy-mm-dd
select *,(Gen_Electricity_Usage-Gmers_Electricity_Usage)as Diff from gmmers1,gmmers2 where gmmers1.sitecode=gmmers2.gmmerssitecode and (Gen_Electricity_Usage-Gmers_Electricity_Usage) <>0 end else if @UTILITY='GAS' begin IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'gengas') DROP TABLE gengas IF EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'gmmersgas') DROP TABLE gmmersgas create table gengas(sitecode varchar(15), Gen_Gas_usage bigint ) create table gmmersgas (gmmerssitecode varchar(15), Gmers_Gas_Usage bigint ) insert into gengas Select site.Sitecode,sum(isnull(AcctRptdata.NaturalGasUse,0)*factor) as 'Gas Usage' From GEN..AcctRptdata AcctRptdata, GEN..site site,SuperAccesslevels.dbo.convfactor,SuperAccesslevels.dbo.countrysettings Where ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and --((AcctRptdata.Year*100)+AcctRptdata.Month) < year(DATEADD(m,-1, GetDate()))*100+month(DATEADD(m,-1, GetDate())) and ((AcctRptdata.Year*100)+AcctRptdata.Month) >= 200511 and ((AcctRptdata.Year*100)+AcctRptdata.Month) <= 200707 and site.idsite = AcctRptdata.siteid and site.sitecode not like ('C%')and len(sitecode ) = 8 and AcctRptdata.idsvc in (200,300) and SuperAccesslevels.dbo.convfactor.[Default] = SuperAccesslevels.dbo.countrysettings.IdUnitGas and SuperAccesslevels.dbo.countrysettings.IdCountrySetting = Site.IdCustomerSetting and [user] = 61 and site.sitecode not like '%B%' and site.sitecode not like '9999%' and site.sitecode in (select left (sitecode,8) from GEN..site where len(sitecode) >8) and AcctRptdata.NaturalGasUse >0 ----Added on 16th Aug --and site.sitecode in (select left(sitecode,8) from gmers_prodn..facility_data where len(sitecode) = 11) Group by site.Sitecode having sum(AcctRptdata.NaturalGasUse*factor) > 0 Order by site.Sitecode
insert into gmmersgas select left( sitecode, 8 ) BU , sum(Utility_Natural_Gas_Volume) as 'gas use' from GMERS_PRODN..fuel_data where sitecode in --(select sitecode from facility_data where left (sitecode,8) in (select sitecode from gen..site where sitecode not like 'C%' and len(sitecode ) > 8 ) -- and len(sitecode )= 11 ) and rpt_dt >= '2005-11-01' and rpt_dt < '2007-08-01' and sitecode not like '%B%' and sitecode not like '9999%' group by left( sitecode, 8 ) order by left( sitecode, 8 )
select *,(Gen_Gas_usage-Gmers_Gas_Usage)as Diff from gengas,gmmersgas where gengas.sitecode=gmmersgas.gmmerssitecode and (Gen_Gas_usage-Gmers_Gas_Usage)<>0 end
My aim is to pass sitecode having difference <>0 and from date and todate as an parameter to another stored procedure which updates sitewise for the utility so that in case a particular sitecode with same date range is included in one utility it should not be repeated in another utility.
I admit I am a novice to queries and stored procedures but understand stored procedures are more secure, so I am choosing to challenge myself with a stored procedure and have not been successful at all.
What I am looking for is a stored procedure which would query the single table named Hospital, which would search from a single textbox the end user would enter the text they are searching for on a Windows VB application but is dependant on a few end user selected items.
1. The end user can select a radio button either "Starts with" or "Contains" 2. The end user can select from 6 checkboxes (Hospitals, Address, City, State, Zip, Type) to limit or expand their search from the columns in the table.
The table has 17columns (CO, PARENTCO, ADDR, POBox, CITY, State, ZIP, TEL, FAX, WEBSITE, HOSP_TYPE, OWNERSHIP, BEDS, CONTACT, TITLE, Email) but I am only allowing the end user to search by the above 6 columns and need to display the above 6 columns plus the phone, fax and website columns.
After the user clicks the search button it displays the results in a listbox and the user will then select the one they want and it displays the information in another set of textboxes.
Hopefully someone can get me pointed in the right direction! Thanks for your help!
How to pass a XML data parameter to an SQL 2005 Stored Procedure I hope to insert a xml data into an typed xml column in SQL 2005. 1. I can run the Code 1 correctly. 2. I hope that I can pass a XML data parameter to an SQL 2005 Stored Procedure, So create the Code 2. but I get the error below:XQuery [cw_bookmark.Bookmark.modify()]: Only non-document nodes can be inserted. Found "xs:string ?". 3. I create the Code 3, but I get the error below:XQuery [cw_bookmark.Bookmark.modify()]: ',' or ')' expected 4. I create the Code 4, but I get the error below:XQuery: SQL type 'xml' is not supported in XQuery.
//--------------------------Code 1-------------------------------------create procedure Hellocw_InsertBookmark40@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert <x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 1------------------------------------- //--------------------------Code 2-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml varchar(80)='<x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>'asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert sql:variable("@Insertxml")as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 2------------------------------------- //--------------------------Code 3-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml varchar(80)='<x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>'asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert cast(sql:variable("@Insertxml") as xml)as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 3------------------------------------- //--------------------------Code 4-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml xmlasupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert sql:variable("@Insertxml")as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId //--------------------------Code 4-------------------------------------
I wrote a Stored Procedure spMultiValue which takes Multi Value String Parameter "Month". The stored procedure uses a function which returns a table. when I Execute the stored procedure from SQL Server 2005 with input "January,February,March" everything works fine. In the dataset , I set command type as Text and typed the following statement. EXEC spMultiValue " & Parameters!Month.Value &" its not returning anything. can anyone tell me how to pass multivalue parameter to stored procedure. Thanks for your help.
What is the best way to design this stored procedure for speed?
I want to pass in a list of IDs and have a return value of a table that contains the ID and its associated value. Is there a way to pass in as table and come out as table?
I created a stored procedure like the following in the hope that I can pass mulitple company_id to the select statement:
CREATE PROC sp_test @in_company_code nvarchar(1024) AS
select company_code, name, description from member_company where company_code in (@in_company_code)
However, I tried the following :
exec sp_test 'abc', 'rrd', 'bbc'
Procedure or function sp_test has too many arguments specified.
and SQLServer doesn't like it.
Did I specify this stored procedure correct? If so, how can I can pass multiple values to the stored procedure then to the sql statement? If not, is it possible to specify a stored procedure like this?
I wrote a stored procedure that takes a string of values, seperated by semicolon as parameter. The procedure is below;
Code: ALTER PROCEDURE [dbo].[selectUserTabsByRoles] @var varchar(max) AS BEGIN SELECT distinct * from tbl_tabs where ( PATINDEX('%'+left(@var,1)+'%', roles) > 0 or PATINDEX('%'+right(@var,1)+'%', roles) > 0 ) AND parent is null and tabstatus =1 ORDER BY tabposition END
My problem is, when I pass a parameter like 1; it fetches all rows with roles having 1. But I realised that the last row in the sample data does not have 1 as roles, but rather 11.
I have a stored procedure that contains a paramteter of type nvarchar(max). What is the syntax to pass this parameter to the sp from a VB.Net application. Specifically, I need to know what to put in the 3rd parameter below:
I have One package that it contains one Execute SQL task in that i have placed a Stored procedure . Now i want to pass values to Stored procedure parameters from a databse table by dynamically .For this i am trying to use " Script task " How can i pass that table column values to that stores procedure thru using Script Task?
Hi, I have created an report by selecting stored procedure as dataset data source. Now when I run the report, it is asking for the parameter values for my stored procedure, but I want to pass the values from another .aspx page. Could any one please let me how do I pass values to the stored procedure parameters in the report. I tried doing the Local method of reports, but the printer icon is not appearing in that, if I use Reportviewer control of my own. When I use the Remote method of reports, I am facing this problem. Please could any one help me in this.
I have a temporary table with multiple records and a Stored Procedure requiring a value. In a Stored Procedure, I want to loop through records in the table and use the value from each record read as input to another Stored Procedure. How do I do this?
