I'm in sql server mgmt 2005 and i highlighted a stored proc and clicked on "execute". I need to pass a null value in as the first param value to test this stored proc. what is the syntax, is below correct?
EXECUTE @RC = [SomeDataBaseName].[dbo].[sp_SomeStoredProcedure]
null
,'1234'
,1
In my front end, I have a procedure in which the operator selects multiple tickets. I have in mind to create a stored procedure which accepts its input parameter and plugs it into an IN() clause in an Update statement, something along these lines:
Update TicketInventory Set SalesID = 12345 Where TicketInventoryID IN( myInputParam );
Can I pass an array of Integers into a stored proc and have it work like this? Alternatively, I could pass a comma-delimited string containing the Integers. Could I plug that into the IN()? Or is there is yet another way to accomplish this?
TIA,
Arthur
Can you pass an array into a stored proc or do we have to use indiviual parameters.
If we can, any code exmaple woudl be great.
Cheers
Chris
hii
I have a problem in when i pass xml as input to stored procedure. The problem i m facing is that :
Say i have a table which has id as primary key in it.Now in my sp i want to delete some rows from that table and in xml i am passin more than 1 id ( it can be four even).
But before deleteion i want to check that delete the with that ID iff the ID exists else raise error for the id w/c does not exist like 'This Id does not exist.'
what i want is to loop between the id's which are being passed as i/p to sp..
and delete the row if it exists elso diaplsy message this id does not exist..
somewhat like this
If Exists(Select ProfileName From Area52 Where Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) ))
Begin
Select * From Area52Docs
WHERE Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) )
DELETE FROM Area52Docs
WHERE Area52ID in
( Select T.Item.value( '@Area52ID', 'uniqueidentifier')
FROM @XMLString.nodes('Area52') AS T(Item) )
DELETE FROM Area52
FROM @XMLString.nodes('Area52') AS T(Item)
where Area52id=T.Item.value( '@Area52ID', 'uniqueidentifier')
select T.Item.value( '@Area52ID', 'uniqueidentifier') FROM @XMLString.nodes('Area52') AS T(Item)
Select 12
End
Else RaisError('This Record Does Not Exist',11,1)
the thing i want to do is as above..but its not workin..it works only for the first id int he list of id's
plzz do help...
Hi, I have created an insert stored procedure which inserts a userid into an sql server 2005 field of datatype uniqueidentifier.
What datatype would the parameter be in my c# code?
do i pass it in as an object datatype?
the code is below....
1 conn = new SqlConnection(ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString);
2
3 cmd = new SqlCommand("spInsKeyswap_history", conn);
4
5 cmd.CommandType = CommandType.StoredProcedure;
6
7 MembershipUser mu = Membership.GetUser(User.Identity.Name);
8
9 object gdUserID = mu.ProviderUserKey;
10
11
12
13
14
15 cmd.Parameters.Add("@user_title", SqlDbType.VarChar, 50);
16
17 cmd.Parameters.Add("@first_name", SqlDbType.VarChar, 20);
18
19 cmd.Parameters.Add("@last_name", SqlDbType.VarChar, 50);
20
21 cmd.Parameters.Add("@email", SqlDbType.VarChar, 50);
22
23 cmd.Parameters.Add("@birthday", SqlDbType.VarChar, 15);
24
25 cmd.Parameters.Add("@alternate_number", SqlDbType.VarChar, 50);
26
27 cmd.Parameters.Add("@msisdn", SqlDbType.VarChar, 50);
28
29 cmd.Parameters.Add("@call1", SqlDbType.VarChar, 50);
30
31 cmd.Parameters.Add("@call2", SqlDbType.VarChar, 50);
32
33 cmd.Parameters.Add("@call3", SqlDbType.VarChar, 50);
34
35 cmd.Parameters.Add("@new_sim_msidn", SqlDbType.VarChar, 50);
36
37 cmd.Parameters.Add("@dealer_id", SqlDbType.UniqueIdentifier);
38
39 cmd.Parameters.Add("@status_code", SqlDbType.Int);
40
41 cmd.Parameters.Add("@support_id", SqlDbType.Int);
42
43 cmd.Parameters.Add("@return_value", SqlDbType.Int);
44
45 cmd.Parameters["@user_title"].Value = txtTitle.Text.ToString();
46
47 cmd.Parameters["@first_name"].Value = txtFirstName.Text.ToString();
48
49 cmd.Parameters["@last_name"].Value = txtLastName.Text.ToString();
50
51 cmd.Parameters["@email"].Value = txtEmailAddress.Text.ToString();
52
53 cmd.Parameters["@birthday"].Value = txtBirthday.Text;
54
55 cmd.Parameters["@alternate_number"].Value = txtAlternate.Text.ToString();
56
57 cmd.Parameters["@msisdn"].Value = txtNew.Text.ToString();
58
59 cmd.Parameters["@call1"].Value = txtCall1.Text.ToString();
60
61 cmd.Parameters["@call2"].Value = txtCall2.Text.ToString();
62
63 cmd.Parameters["@call3"].Value = txtCall3.Text.ToString();
64
65 cmd.Parameters["@new_sim_msidn"].Value = txtOld.Text.ToString();
66
67 //get logged in users user_id from membership
68
69 cmd.Parameters["@dealer_id"].Value = gdUserID;
70
71 cmd.Parameters["@status_code"].Value = 1;
72
73 cmd.Parameters["@support_id"].Value = 0;
74
75
76
77 cmd.Parameters["@return_value"].Direction = ParameterDirection.ReturnValue;
78
79 cmd.ExecuteNonQuery();
80
81 int returnValue = (int)cmd.Parameters["@return_value"].Value;
82
83 conn.Open();
84
85
86
I am trying to test a stored proc and I can't execute the stored proc when I use a Guid. Has anyboyd had the same problem. I right click in VS 2008 on the Stored proc click Execute and fill in the variables one of them is a Guid and no records are returned.
Here is my guid, I have tried '{0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2}', {0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2} and "0a5c25fa-3aac-4abc-8d07-6d76ab46c9b2" no success. This stored proc might not work but I have had the same issue with other stored procs when I wanted to test them by using execute and using a Guid.
Testing with an int works fine when I try to Select the records by UserID which is a Guid no cigar. I have notice this behavier before is there a way around this problem, thanks newbie
I'm developing a web app using VS2005. I have a webpage with panel containing a gridview populated by a SQLdatasource. The SQLdatasource in turn is populated by a stored procedure that can take up to 5 parameters. The user types in up to 5 separate words (searchterms) in a text box which are then parsed and passed to the stored proc in the datasource which performs a fulltext search. The gridview then becomes visible. My problem is that unless the user types in 5 searchterms (no less), the gridview returns zero rows. 5 searchterms returns the proper results. Somehow, I need to be able to pass in null or empty values for unneeded parameters.
I've tested the stored procedure in Query Analyzer and from within the SQLdatasource configuration (using Test Query) using 0 up to 5 parameters and it works fine, so that's not my problem. Here's the code that runs after the user types in their search term(s) and presses a button:Public Sub FTSearch_Command(ByVal sender As Object, ByVal e As CommandEventArgs) Handles btnFullText.Command
Dim x As Integer
pnlFullText.Visible = Falsefiltertext = Replace(txtSearchTxt.Text, "'", "''")
If Not filtertext Is Nothing Then
filtertext = filtertext.Trim
Else
Return
End IfDim arrayString() As String = filtertext.Split(" ")
Dim length As Integer = arrayString.LengthFor x = 0 To (length - 1)
If Not arrayString(x) Is Nothing ThenSelect Case x
Case 0 : lblFTParm1.Text = arrayString(0)Case 1 : lblFTParm2.Text = arrayString(1)
Case 2 : lblFTParm3.Text = arrayString(2)Case 3 : lblFTParm4.Text = arrayString(3)
Case 4 : lblFTParm5.Text = arrayString(4)
End Select
End If
Next
pnlFullText.Visible = "True"
End Sub
Any ideas?
Thanks in advance.
sSQL = "spBPT_Fuel_Set_Status_Approved"
cmdDailyPrices.CommandText = sSQL
cmdDailyPrices.Parameters.Add("@user", "Philippe")
cmdDailyPrices.Parameters.Add("@verbose", "0")
cmdDailyPrices.Parameters.Add("@Day_1_add", rowBand1.Cells(DayParameters.AddFactor).Value)
cmdDailyPrices.Parameters.Add("@Day_1_multiply", rowBand1.Cells(DayParameters.MultiplyFactor).Value)
cmdDailyPrices.Parameters.Add("@Day_2_add", "NULL")
cmdDailyPrices.Parameters.Add("@Day_2_multiply", "NULL")
For @Day_2_add and @Day_2_multiply parameters I want to pass the value as NULL not string "NULL"
could you please let me know how to do this?
Thanks
Hi there,
I am using SQL Reporting Services to generate reports. I am calling the stored procedure from the reporting services. The procedure has parameters which take null. I am stuck with passing null to the parameter from the reporting services. I shows the error and the report is not generated. Could you please suggest the way to pass null to the stored procedure parameter from the SQL Reporting Services.
Kindly reply me with the possible solution ASAP.
Thanks in advance
I have a multiselect checkbox list in my UI. I pass the list items to my stored proc as comma separated parameter and then I have a function which converts this parameter to a table with separate rows.
E.g. : a,b,c,d
Converted to result table
result
a
b
c
d
I want to insert each row of the result table into another table. How to do that.
E.g., the table after the function is :
CREATE TABLE #result
(
Subject varchar(100)
)
insert into #result values ('a')
insert into #result values ('b')
insert into #result values ('c')
insert into #result values ('d')
So the pseudo code is something like
for each row in #result
insert row into another table
I have a stored proc which should be returning a datatable. When I execute it manually it returns all requested results. However, when I call it via code (C#) it is returning a null table which leads me to believe the problem is in my code. I'm not getting any errors during runtime. Any help at all would be a BIG help!
private void PopulateControls() { DataTable table = CartAccess.getCart(); }
public static DataTable getCart() { DbCommand comm = GenericDataAccess.CreateCommand(); comm.CommandText = "sp_cartGetCart";
DbParameter param = comm.CreateParameter(); param.ParameterName = "@CartID"; param.Value = cartID; param.DbType = DbType.String; param.Size = 36; comm.Parameters.Add(param);
DataTable table = (GenericDataAccess.ExecuteSelectCommand(comm)); return table; }
public static DataTable ExecuteSelectCommand(DbCommand command) { // The DataTable to be returned DataTable table; // Execute the command making sure the connection gets closed in the end try { // Open the data connection command.Connection.Open(); // Execute the command and save the results in a DataTable DbDataReader reader = command.ExecuteReader(); table = new DataTable(); table.Load(reader); // Close the reader reader.Close(); } catch (Exception ex) { Utilities.SendErrorLogEmail(ex); throw ex; } finally { // Close the connection command.Connection.Close(); } return table; }
If I run this statement in Query Analyzer, it properly returns 1for my testing table. But if I put the statement into a storedprocedure, the stored procedure returns NULL. What am I doingwrong? I suspect it may be related to how I defined the parametersfor the stored procedure. Perhaps my definition of TableName andColumnName don't match what COLUMNPROPERTY and OBJECT_ID expect toreceive, but I don't know where to look for the function declarationsfor those. Any pointers would be appreciated.Select statement:SELECT COLUMNPROPERTY(OBJECT_ID('Table1'), 'TestID', 'IsIdentity') ASIsIdentityTable definition:CREATE TABLE [dbo].[Table1] ([TestID] [numeric](18, 0) IDENTITY (1, 1) NOT NULL ,[Description] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]Stored Procedure definition:CREATE PROCEDURE spTest(@TableName varchar,@ColumnName varchar)AS SELECT COLUMNPROPERTY(OBJECT_ID(@TableName), @ColumnName,'IsIdentity') AS IsIdentity
View 2 Replies View RelatedThe following t-sql 2012 works fine in sql management studio. However when I place it in a .net 2010 web form application, I am told the sql does not work when the parameter values are null. Thus can you tell me what I can change in the sql below that will accept null as 3 possible input values?
SELECT i.[lastName]
,i.[firstName]
,i.[middleName]
,i.[suffix]
,a.[userid]
[code]...
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
I am writing a (very simple) stored procedure that counts records on a table. The stored proc is as follows:
------------------------------------------
CREATE PROCEDURE GetRecordCount
@TableName varchar(30),
@NumRecs int OUTPUT
AS
DECLARE @sqlcmd varchar(250)
SET @sqlcmd = 'SELECT @NumRecs = COUNT(email)
FROM ' + @TableName + 'WHERE Include = "Y"'
EXEC (@sqlcmd)
------------------------------------------
The intention is to return variable @NumRecs. I am calling the routine from Query Analyzer as follows:
DECLARE @MyNumber int
EXEC GetRecordCount "MYTABLE", @NumRecs = @MyNumber OUTPUT
PRINT @MyNumber
When I execute the above line, I get an error message:
Server: Msg 137, Level 15, State 1, Line 0
Must declare the variable '@NumRecs'.
If I replace the "SET @sqlcmd = .." AND "EXEC(.." with:
SELECT SELECT @NumRecs = COUNT(email)
FROM MyTable etc.
i.e. without passing the table name, the process works fine. How can I construct an sql command using a parameter?
Although I've got a fine running mirror between my clustered 2005 sp1 SQL box in Tampa, and my DR box in Dallas, I cannot run mirroring monitor. It fails with "no data received" in all fields.
Likewise, I cannot run "sp_dbmmonitorresults" or in fact any "sp_dbm*" stored procedure.....because none of them exist on the server.
A fast perusal of our various SQL 2005 servers reveals that only those servers that also have the SQL Server Management Studio installed to them have any of the mirroring system stored procedures as well.
This poses a dilemma for me. I have a serious need to monitor mirroring, however I work in a very sensitive industry with uber security, and we simply cannot be permitted to install SQL Server Management Studio on a SQL server that contains production data.
I presume that it is in fact these system stored procedures that enable the graphical Mirroring Monitor, explaining the failure.
Is there a method whereby I can get these system stored procedures installed to the clustered SQL server all by themselves? Installing and then uninstalling the Management Studio is *not* an option. Thanks!
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies View RelatedI am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies View RelatedHow can I pass NULL to a parameter, if now entry is made in the textbox?
Dim KeywordParam As New SqlParameter("@Keyword", Me.KeyWordText.Text)
MyCommand.Parameters.Add(KeywordParam)
hi i am using formview
i have a date field textbox which selects date from ajax calender
now my point is when i make this field blank
at that time in my gridview rather then displaying the date field blank
it shows me the value 1 Jan 1900
this is the default date of sqlserver which it returns when we leave the field ''
now when i pass the value null it automatically takes it as ''
in my class file my function is
public object checkdate(TextBox txtdate) { if (txtdate.Text == "") { return null; } else { return txtdate.Text; } }
in my cs file i wrote object checkemptydate = obj.checkdate(nextvaccinationdate);
string values = patientID + ",'" + vaccination + "',convert(varchar,'" + vaccinationdate + "',106)," + checkemptydate + ",'" + remarks + "'";
note that i even tried this too
string values = patientID + ",'" + vaccination + "',convert(varchar,'" + vaccinationdate + "',106)," + null + ",'" + remarks + "'";
and
string values = patientID + ",'" + vaccination + "',convert(varchar,'" + vaccinationdate + "',106),convert(varchar,'" + checkemptydate + "',106),'" + remarks + "'";
but nothing is working it passes '' not null
how could i solve this problem?
shweta
I would like to know if it's possible to pass NULL value to the database. I want to update a column, a parameter has to be passed in to do so, i.e @value = '123'. but if there were no parameter value, i.e @value = '', I want to the value in the database to be NULL. I don't want to pass (''). can this be achieved?
View 5 Replies View RelatedI have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies View RelatedHow to pass a null to SelectParameters in SqlDataSource?
The type of "CreateDate" is DateTime, the following code can be run correctly!
SqlDataSource1.SelectParameters["CreateDate"].ConvertEmptyStringToNull = true;SqlDataSource1.SelectParameters["CreateDate"].DefaultValue = "2006-11-12";
now I hope to pass null value to the Parameter "CreateDate", but the following 3 section codes don't work!
SqlDataSource1.SelectParameters["CreateDate"].ConvertEmptyStringToNull = true;SqlDataSource1.SelectParameters["CreateDate"].DefaultValue = string.Empty;
or
SqlDataSource1.SelectParameters["CreateDate"].ConvertEmptyStringToNull = true;SqlDataSource1.SelectParameters["CreateDate"].DefaultValue =null;
or
SqlDataSource1.SelectParameters["CreateDate"].ConvertEmptyStringToNull = true;SqlDataSource1.SelectParameters["CreateDate"].DefaultValue = "";
Hi i m using vwd2005 express and sql express.1. I want to write stored procedure in sql express using sql server management studio express. I m not sure where to write and how to execute the stored procedure in sql server management studio express. Can any one explain the steps required to achieve this? 2.And what is the difference between creating database using:- a. right click the project in solution explorer-> add new item->SQl database(creating .mdf file)and b.clicking a database explorer->data connection->Add connection .... thanks. jack.
View 4 Replies View RelatedI want to use a stored procedure inside Sql Server from my aspx page so that the data entered in the form goes to the database after submit.
My stored procedure (inside the SQL Server) inserts several fields in a table and it returns two variables.
What code I need to write in order to pass the data from the form to the stored procedure inside the Sql Server? And to store the two returned values?
Thanks
How to pass value for the “in� clause in the SQL server stored procedure? Let us consider the following code.
declare @Country varchar(200)
set @CountryIds='1,11'
select CountryName from COUNTRY where CountryId in (@CountryIds)
GO
In the above code, the lists of country ids are needed to feed from the front end. In the above example, we need to select countries for 1 and 11. So, how to pass this from front end and what will be the data type of the parameter. I am using front end as .Net. Please help in this regard. The stored procedure what I wrote was.
CREATE PROCEDURE [cmp].[Events_By_Country]
@CountryIds varchar(200)
AS
select CountryName from COUNTRY where CountryId in (@CountryIds)
GO
Which is not working.
What is the syntax to pass in null value for boolean data type in VB in the stored procedure?
This is what I tried and it doesn't work.
.Parameters.Append .CreateParameter("@disposition", adBoolean, adParamInput, 1, vbNull)
Thank you.
I have a Nullable columns. I want the value to be zero if NULL is passed.
1) having a view for every such table,
2) using ISNULL for needed columns in that view
3) using those view for inserts instead of using tables directly.
This way i can reduce the number of places to use ISNULL in all my SPs.I dont want to make it to NOT NULL, as my application impact will be high. And Default constraint does not work here.
How can I pass into the database (@User_fax = null) if the fax form field is empty, from a command type Stored Procedure? For example:
Dim CmdUpdate As New SqlCommand("Form2_NewUser", strConnection)
CmdUpdate.CommandType = CommandType.StoredProcedure
CmdUpdate.Parameters.Add("@User_fax", SqlDbType.char, 9)
CmdUpdate.Parameters("@User_fax").Value = fax.Text()
...
strConnection.open()
CmdUpdate.ExecuteNonQuery
strConnection.close()
And, the stored procedure inside Sql server:
USE market1
GO
ALTER PROC Form2_NewUser
@User_id bigint, @User_fax char(9),...
AS
SET NOCOUNT ON
UPDATE Users
SET User_fax = @User_fax, ...
WHERE User_id = @User_id
SET NOCOUNT OFF
GO
Thank you,
Cesar
Hi all
How to pass Null parameter in Reporting Services.
Regards
Can anyone help me? I'm trying to assign @totalvisits the sum of visits.totalvisits in the example below. I keep getting errors concerning the line
"@totalvisits= Sum(visits.totalvisits) AS SumOfTotalVisits"
I can't figure out how to write it out correctly so the sum fills @totalvisits.
--------------------------------------------------
DECLARE @email varchar (50)
DECLARE @totalvisits int
SELECT
@email = users.email,
@totalvisits= Sum(visits.totalvisits) AS SumOfTotalVisits
LEFT JOIN visits ON users.username = visits.username
GROUP BY users.username HAVING ((users.username) = @username)
--------------------------------------------------
Any help would be appreciated!
I have a stored proc that receives the connection string detials like servername, dbname, tablename,userid, pwd as parameters. how do i connect to that particular database on that server with the userid and pwd details ?
thanks
D.