Passing ANY Value To The &<InsertParameters&> Section Of A SQLDataSource
Jun 6, 2007
Ok-
I'm new at this, but just found out that to get data off a form and insert into SQL I can scrape it off the form and insert it in the <insertParameter> section by using
<asp:ControlParameter Name="text2" Type="String" ControlID="TextBox2" PropertyName="Text"> (Thanks CSharpSean)
Now I ALSO need to set the user name in the same insert statement. I put in a UserName control that is populated when a signed in user shows up on the page. But in my code I've tried:
<asp:ControlParameter Name="UserName" Type="String" ControlID="LoginName1" DefaultValue="Daniel" PropertyName="Text"/>
and I get teh errorDataBinding: 'System.Web.UI.WebControls.LoginName' does not contain a
property with the name 'Text'.
So I take PropertyName="Text" out, and get the error:
PropertyName must be set to a valid property name of the control named
'LoginName1' in ControlParameter 'UserName'.
what is the proper property value?
SO.....BIG question...
Is there a clean way to pass UserName to the insert parameters? Or ANY value for that matter? Id like to know how to write somehting like
String s_test = "test string";
then in the updateparameter part of the sqldatasource pass SOMEHITNG like (in bold) <asp:Parameter Name="UserName" Type="String" Value=s_test />
Thanks in advance...again!
Dan
View 5 Replies
ADVERTISEMENT
Nov 30, 2007
Hello, I have a SqlDataSource named "OrderHistoryDataSource" that I want to add a parameter to from the code behind file. THe reason I want to do this is todynamicly add the UserID from a currently logged on user. What am I doing wrong? Is there a better way?My code below: --------------------------------------------------------------------Code behind file----------------------------------------------------------------------------using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
public partial class OrderHistory : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
//If the user is not logged in this will redirect to Login.aspx
if (!Request.IsAuthenticated)
{
Response.Redirect("~/Login.aspx");
}
//test to display userID
MembershipUser myObject = Membership.GetUser();
string UserGUID = myObject.ProviderUserKey.ToString();
SqlDataSource DataSource = Page.FindControl("OrderHistoryDataSource");
DataSource.InsertParameters.Add("CurrentUserId", UserGUID.ToString());
DataSource.Select();
}
}
--------------------------------------------------------------------Asp.net
file----------------------------------------------------------------------------<%@ Page Language="C#" MasterPageFile="~/MasterPage.master" AutoEventWireup="true" CodeFile="OrderHistory.aspx.cs" Inherits="OrderHistory" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="CONTENT" Runat="Server">
<table id="ContentTable">
<tr>
<td id="ContentTitleCell" colspan="3" style="width: 684px">
ORDER HISTORY</td>
</tr>
<tr>
<td colspan="3" rowspan="2" style="width: 684px">
<asp:GridView ID="OrderHistoryGrid" runat="server">
</asp:GridView>
<asp:SqlDataSource ID="OrderHistoryDataSource" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT * FROM [UserOrders] WHERE ([UserID] = [CurrentUserID]) ORDER BY [OrderID]
VALUES (@UserId, @Address, @City, @State, @Zip)"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters></InsertParameters>
</asp:SqlDataSource>
</td>
</tr>
<tr>
</tr>
</table>
</asp:Content>
View 3 Replies
View Related
Jul 10, 2006
Hello
Following is my code which is not working.
<asp:SqlDataSource ID=events runat=serverSelectCommand="SELECT * FROM TBL_EVENT WHERE SECTION_ID=<%= Session("ID")%>"ConnectionString = "<%$ appSettings:SQLConnectionString %>"</asp:SqlDataSource>
I want to pass the value of Session("ID") into that query. How can I do that?
View 4 Replies
View Related
Jan 12, 2007
My sql-string looks like this:
SelectCommand="SELECT * FROM Table1 WHERE Field1 IN @target"
And my parameter looks like this:
<asp:ControlParameter Name="target" ControlID="CheckBoxList1" PropertyName="SelectedValue" />
This code gives me a syntax error near @target. Someone got a solution?
View 2 Replies
View Related
May 25, 2007
Hi All, Maybe because it's Friday afternoon and I can't think clearly anymore... A really (I guess) simple problem: DataView with SqlDataSource <asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1"> <ItemTemplate> <asp:Label ID="id" runat="Server" Text='<%# Eval("ID")%>' /> </ItemTemplate> </asp:DataList> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnectionString %>" SelectCommand="GetItem" SelectCommandType="StoredProcedure"> </asp:SqlDataSource> Now, what I have to do is to pass two parameters to the stored procedure: 1) ProviderUserKey2) Int ValueBut the question becomes "how"?Even if I define: <SelectParameters> <asp:Parameter Name="I_GUID" /> <asp:Parameter Name="I_TYPE" Type="Int32" DefaultValue="1" /> </SelectParameters>I need to set the parameters from code behind.... Thanks for any suggestions Adam
View 8 Replies
View Related
Aug 23, 2007
I am using a SQLDataSource with Stored Procedures. The Select, Insert and Update all work well. However I cannot get the delete to work. My stored procedures are tested and verified and the parameter names are the same as the source columns. When I try to run the delete an error that the stored procedure expects the parameter @locationStationId, however this value passes properly for the Update command?!? I tried to change the parameter to original_locationStationID to pass the original value, however this result in Null being passed for the parameter.
I cannot understand why this works for Update and passes the location ID, but will not work for DELETE. Can anyone shed any light onto the matter?
Thanks.OldValuesParameterFormatString="original_{0}" UpdateCommand="spUpdateLocation" UpdateCommandType="StoredProcedure"
DeleteCommand="spDeleteLocation" DeleteCommandType="StoredProcedure">
<DeleteParameters>
<asp:Parameter Name="locationStationId" Type="String" />
</DeleteParameters>
<InsertParameters>
<asp:Parameter Name="locationStationId" Type="String" />
<asp:Parameter Name="locationType" Type="String" />
<asp:Parameter Name="locationName" />
<asp:Parameter Name="division" Type="String" />
</InsertParameters>
View 3 Replies
View Related
Nov 14, 2005
Hi,I have a UserControl called DataPage with the following public property:private SqlDataSource sqlDataSource;public SqlDataSource SqlDataSource{ get { return this.sqlDataSource; } set { this.sqlDataSource = value; }}In a web form i create an instance of the DataPage UserControl and assign the SqlDataSource properties:<%@ Page MasterPageFile="~/MasterPages/Page.master" Inherits="IMS.Pages.ModelType" Title="Model Types" %><asp:Content ID="Content" ContentPlaceHolderID="ContentPlaceHolder" runat="Server"> <ims:DataPage ID="DataPage" runat="server"> <SqlDataSource ID="SqlDataSource" runat="server" ConnectionString="IMSConnectionString" DeleteCommand="DeleteModelType" DeleteCommandType="StoredProcedure" InsertCommand="InsertModelType" InsertCommandType="StoredProcedure" SelectCommand="SelectModelType" SelectCommandType="StoredProcedure" UpdateCommand="UpdateModelType" UpdateCommandType="StoredProcedure"> <DeleteParameters> <asp:Parameter Name="ModelTypeID" Type="Int32" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="ModelTypeID" Type="Int32" /> <asp:ControlParameter ControlID="UpdateModelTypeTextBox" Name="ModelType" PropertyName="Text" Type="String" /> </UpdateParameters> <SelectParameters> <asp:Parameter Name="ModelTypeID" Type="Int32" /> </SelectParameters> <InsertParameters> <asp:ControlParameter ControlID="InsertModelTypeTextBox" Name="ModelType" PropertyName="Text" Type="String" /> </InsertParameters> </SqlDataSource> </ims:DataPage></asp:Content> Then in the UserControl I try to call the SqlDataSource.Insert() method, and I get the following error:"The SqlDataSource control 'SqlDataSource' does not have a naming container. Ensure that the control is added to the page before calling DataBind."Now, based on the error message it sounds like that SqlDataSource is not contained in either the web form or the usercontrol. Any ideas, thanks very much for any help people.Grant
View 3 Replies
View Related
Aug 22, 2006
Hi,
I'm developing a website using vwd express and I have created a GridView that bounds data from a stored procedure. The stored procedure takes one parameter. I tested it by using a default value and it works fine.
Now, instead of the default value i want to pass the current logged in user name as a parameter.
How do i do this. All the info i found around are for passing parameters to the select command of sqldatasource but i cant get it to work when i use a stored procedure.
Thanks, M.
View 4 Replies
View Related
Feb 22, 2007
Hi,
I am trying to get the selected options from a listbox and either pass a SqlDataSource object the array or loop through it and pass each element of the array. I then need to modify the returned databtable to graphing function, but first drop the last column. I was wondering if anyone can help me with the following:
1. Pass an array into SqlDataSource Select OR 2. Pass a single argument into the Select statement and populate a datatable without it writing over the current row each time it iterates through the foreach statement. I am looking for the dataview to append to dt each time it loops. Is there a property for dataview that behaves like the "ClearBeforeFill" for table adapters?3. Update a parameter programmatically
Below code works, but I think it can be more efficient. Any suggestions would be greatly appreciated.
Thanks in advance!!
DataTable dt = new DataTable(); DataTable dt2 = new DataTable(); DataView dv = new DataView();
foreach(ListItem liOptions in ListBox1.Items) { if(liOptions.Selected) { SqlDataSource1.SelectParameters.Add("Parameter1", liOptions); dv = (DataView)SqlDataSource1.Select(DataSourceSelectArguments.Empty); dt2 = dv.Table; dt.Merge(dt2); dt2.Dispose(); SqlDataSource1.SelectParameters.Clear(); } }
if (dt.Rows.Count > 0) { Graph(dt); //Pass original datatable (dt) to Graph(); dt.Columns.RemoveAt(2); //Reformat datatable (dt) and remove last column before binding to Gridview1
GridView1.DataSource = dt; GridView1.DataBind(); } else {
errorMessage.Text = "No data was returned!"; }
View 3 Replies
View Related
Feb 23, 2008
Hello all,I'm writing a site with one page that uses the session variable (User ID) to pick one user ID out of a comma separated list in the field Faculty. The default parameterized query designed in the SqlDataSource wizard only returns lines that contain an exact match:SELECT * FROM tStudents WHERE ([faculty] = @faculty) The query: SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') works as I need when I hard code the query with a specific user ID into the SqlDataSource in the aspx page. It will not work if I leave the @faculty parameter in it:SELECT * FROM tStudents WHERE ([faculty] LIKE '%@faculty%') e.Command.Parameters works to replace the @Faculty with a user ID, but again, adding the single quote and percentage sign either causes errors or returns no results. I've tried several variations of: string strEraiderID = "'%" + Session["eRaiderID"].ToString() + "%'"; e.Command.Parameters["@faculty"].Value = strEraiderID;no results are returned, not even the lines returned with the default select query.How do generate the equivalent of SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') into the SqlDataSource? Thanks much!
View 3 Replies
View Related
Mar 28, 2007
Hello,
I'm having trouble executing a Stored Procedure when I leave the input field empty on a 'search' criteria field. I presume the error is Null/Empty related.
The Stored Procedure works correctly when running in isolation. (with the parameter set to either empty or populated)
When the application is run and the input text field has one or more characters in it then the Stored Procedure works as expected as well.
Code:
.
.
<td style="width: 3px">
<asp:TextBox ID="txtName" runat="server"></asp:TextBox>
</td>
.
.
<asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True"
AutoGenerateColumns="False" DataKeyNames="LogId" DataSourceID="SqlDataSource1"
Width="533px">
<Columns>
<asp:BoundField DataField="LogId" HeaderText="Log Id" InsertVisible="False" ReadOnly="True"
SortExpression="LogId" />
<asp:BoundField DataField="SubmittedBy" HeaderText="Submitted By" SortExpression="SubmittedBy" />
<asp:BoundField DataField="Subject" HeaderText="Subject" SortExpression="Subject" />
<asp:TemplateField>
<ItemTemplate>
<span>
<asp:HyperLink ID="HyperLink1" runat="server">HyperLink</asp:HyperLink></span>
</ItemTemplate>
</asp:TemplateField>
</Columns>
<HeaderStyle BackColor="#608FC8" />
<AlternatingRowStyle BackColor="#FFFFC0" />
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:SmallCompanyCS %>"
SelectCommand="spViewLog" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:ControlParameter ControlID="txtName" ConvertEmptyStringToNull="true" Name="name" PropertyName="Text" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
Stored Procedure:
ALTER PROCEDURE dbo.spViewLog (@name varchar(50) )
AS
SELECT * FROM log_Hdr WHERE (log_hdr.submittedby LIKE '%' + @name + '%')
RETURN
I have tried the 'convertemptystringtonull' parameter but this didn't seem to work.
Any guidance would be much appreciated.
Thank you
Lee
View 2 Replies
View Related
Apr 27, 2007
Ok, so I'm a JSP guy and thing it should be easy to replace "@color" with t_color after I initialized it to red by String t_color = "red";and then calling the insert SqlDataSource1.Insert();here is insert command: InsertCommand="INSERT INTO [favcolor] ([name], [color]) VALUES (@name, @color)" I've tried InsertCommand="INSERT INTO [favcolor] ([name], [color]) VALUES (@name, "+ t_color+")" Ive tried InsertCommand="INSERT INTO [favcolor] ([name], [color]) VALUES (@name, "<%$ t_color %>" )" Is there any easy way to do this? or Can I set it like @color = t_color? Thanks in advance for ANY help JSP turning ASP (Maybe)Dan
View 4 Replies
View Related
Aug 3, 2007
I'm trying to create a Grid View from a stored procedure call, but whenever I try and test the query within web developer it says I did not supply the input parameter even though I am.I've run the stored procedure from a regular ASP page and it works fine when I pass a parameter. I am new to dotNET and visual web developer, anybody else had any luck with this or know what I'm doing wrong? My connection is fine because when I run a query without the parameter it works fine.Here is the code that is generated from web developer 2008 if that helps any...... <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:IMS3TestConnectionString %>" ProviderName="<%$ ConnectionStrings:IMS3TestConnectionString.ProviderName %>" SelectCommand="usp_getListColumns" SelectCommandType="StoredProcedure"> <SelectParameters> <asp:querystringparameter DefaultValue="0" Name="FormID" QueryStringField="FormID" Type="Int32" /> </SelectParameters> </asp:SqlDataSource>
View 5 Replies
View Related
Oct 9, 2007
Hi,I have a stored procedure that takes 3 parameters. I am using a sqldatasource to pass the values to the stored procedure. To better illustrated what I just mention, the following is the code behind:SqlDataSource1.SelectCommand = "_Search"SqlDataSource1.SelectParameters.Add("Field1", TextBox1.Text)SqlDataSource1.SelectParameters.Add("Field2", TextBox2.Text)SqlDataSource1.SelectParameters.Add("Field3", TextBox3.Text)SqlDataSource1.SelectCommandType = SqlDataSourceCommandType.StoredProcedureGridView1.DataSourceID = "SqlDataSource1"GridView1.DataBind()MsgBox(GridView1.Rows.Count) It doesn't return any value. I am wondering is that the correct way to pass parameters to stored procedure?Stan
View 2 Replies
View Related
Mar 13, 2006
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
View 1 Replies
View Related
Mar 1, 2007
Hi,How do I use insertparameters in code-behind? This is the code that I have Dim insertSql As String
insertSql = "INSERT INTO [xyzTable] ([x], [y]) VALUES (@x, @y)"
SqlDataSource1.InsertCommand = insertSql
SqlDataSource1.InsertParameters.Add("@x", "124")
SqlDataSource1.InsertParameters.Add("@y", "456")
SqlDataSource1.Insert() When I execute these line of code I get an error saying "Must declare the variable '@x'." Please help
View 2 Replies
View Related
Jan 25, 2008
Hi - any idea why I'm getting the following? I've got it to work on other pages with different data but I can't work it out. thanks,mander Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error: Line 32: protected void Button1_Click(object sender, EventArgs e)Line 33: {Line 34: SqlDataSource1.InsertParameters["AdminNotes1"].DefaultValue = TextBox1.Text.ToString();Line 35: SqlDataSource1.Insert();Line 36: } Source File: ..adminindex.aspx.cs Line: 34 Stack Trace: [NullReferenceException: Object reference not set to an instance of an object.] Default2.Button1_Click(Object sender, EventArgs e) in c:Documents and Settings..adminindex.aspx.cs:34 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4886
View 6 Replies
View Related
Jan 29, 2008
If someone can show me the correct syntax for the right side of the code below, I'd appreciate it.
srcMoreInfo.InsertParameters("Address").DefaultValue = DirectCast(cuwMoreInfo.FindControl("txtAddress"), TextBox).Text
View 11 Replies
View Related
Sep 21, 2007
I need to keep a section of a report the same size. I have now a table with a detail and group section. The table header must print on every page and the table footer must print on every page. The detail section can only be 16 rows. When I have more than 16 rows the report page breaks perfectly and puts the remaining rows on the next page along with repeating the header and footer. The problem is when there are fewer than 16 rows the table does not take up the full page and looks horrible. All my displayed data is in the data set. I have looked at padding the dataset with bogus rows that would show up at the end and just not display but would rather take care of this on the report end. Any ideas?
Thanks, Chad
View 1 Replies
View Related
Jul 11, 2007
Hi there.
I was wondering if anyone has figured out a way to add text up in the parameter section of a report. I wanted to add something like: "Please use this option when you want a full result set" or something of the sort.
Thanks, Mike
View 1 Replies
View Related
Jul 2, 2007
Hi,
I want to display details ection for each group in a single table using one dataset.
For ex:
Group 1 Row --> Name Age
Details 1 Row--> XXX 30
Details 2 Row--> YYY 20
Group 2 Row --> City Country
Details 1 Row--> CCC ZZZZ
Details 2 Row--> BBB AAAA
View 3 Replies
View Related
May 14, 2007
I am trying to add an Imports statement to the beggining of the custome code section of my report but I recieve this error. There is an error on line 0 of custom code: [BC30465] 'Imports' statements must precede any declarations.
My syntax looks like this:
Imports SB = System.Text.StringBuilder
Imports System.Enum
public function Test ...
end function
Does anyone know if this is even possible and why or why not?
In relation to that, can anyone answear as to why there is a 32K limit on the code section in reporting services?
View 4 Replies
View Related
Nov 1, 2006
Hi,
I am trying to create a XML out of sql 2005 database using FOR XML. I
need to create XML for tables which may contain data having
non-printable ascii characters (1-32 ascii character). I found FOR XML
AUTO failes to genrate this XML, but i can genrate XML using CDATA
section in FOR XML EXPLICIT. As following querie works fine for me.
SELECT
1 AS tag
NULL AS parent,
template_id AS [Emailqueue!1!user_id],
misc1 AS [Emailqueue!1!!cdata]
FROM Emailqueue WITH (NOLOCK)
WHERE queue_id = -2147483169
FOR XML EXPLICIT
in above query misc1 column may contain some non printable ascii
characters.
But i need to store this XML data in some sql XML variable as i need to
pass it to store procedure which expects an xml input. While doing
following i gets an error saying "illegal xml character"
DECLARE @XMLMessage XML
SET @XMLMessage = (SELECT
1 AS tag
NULL AS parent,
template_id AS [Emailqueue!1!user_id],
misc1 AS [Emailqueue!1!!cdata]
FROM Emailqueue WITH (NOLOCK)
WHERE queue_id = -2147483169
FOR XML EXPLICIT)
I am doing all this exercise for SQL service broker. For which i even
need to process same message using OPENXML on differen database server.
Again which will need well formated XML.
Let me know if something dose'nt make sense
any help is appreciated
Thanks
View 1 Replies
View Related
Jul 29, 2015
How to configure AlwaysOn between two different network section?
View 2 Replies
View Related
Jun 7, 2007
I wonder is there any way I can turn off the "Documentation Feedback" sectionof the Books Online at the bottom of the pages... I'm printing some BooksOnline pages for own reference.Thanks in advance...--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200706/1
View 2 Replies
View Related
May 22, 2008
Hi all,
I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.
Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.
https://server/Reports/Pages/Report.aspx?ItemPath=%2fAllpress_MSCRM%2fCustomReportsForCRM%2fa&rs:Command=Render&rc:toolbar=false&&rcarameters=false&rs:ClearSession=true&type=1&typename=account&orgname=Allpress&userlcid=1033&orglcid=1033
Anyone have some pointers for me?
Kia
View 1 Replies
View Related
Aug 1, 2006
I know that anything in a CDATA section will be ignored by an XML parser. Does that hold true for the SSIS XML Source?
I am trying to import a large quantity of movie information and all of the reviews, synopsis, etc are contained in CDATA. example:
<synopsis size="100"><![CDATA[Four vignettes feature thugs in a pool hall, a tormented ex-con, a cop and a gangster.]]></synopsis>
Sounds like a good one, no?
The record gets inserted into the database however it contains a NULL in the field for the synopsis text. I would imagine that the reason for this would fall at the feet of CDATA's nature and that SSIS is ignoring it.
Any thoughts would be appreciated. Thanks.
View 4 Replies
View Related
Mar 21, 2008
Hi,
Can anyone tell me is it possible to put static data (a string) inside details section of a table?
I've tried to find some more pieces of information in the Report Definition Language Specification, but to no avail.
When I put some strings as a detail's cells values they are displayed in the preview window in VS.
But thay are invisible when I open my report using ReportViewer in my app.
So does it means that the only accepted value of a cell within the details section of a table is a name of the field from DataSet (something like =Fields!FieldName.Value) ?
Regards,
Stan
View 1 Replies
View Related
May 22, 2008
Hi all,
I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.
Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.
https://server/Reports/Pages/Report.aspx?ItemPath=%2fAllpress_MSCRM%2fCustomReportsForCRM%2fa&rs:Command=Render&rc:toolbar=false&&rcarameters=false&rs:ClearSession=true&type=1&typename=account&orgname=Allpress&userlcid=1033&orglcid=1033
Anyone have some pointers for me?
View 1 Replies
View Related
Jul 21, 2015
i wand to filter the report based on the country as Canada and france by Using Filter but Not with Parameter..Similarly How to use Not In Operator also.
View 3 Replies
View Related
Nov 16, 2007
Greetings,
I have a wide report. The leftmost two columns have the FixedHeader property set true so they remain visible when I do horizontal scrolling. My problem is that the height of the 1st two rows in the fixed header section increases as soon as I scroll the report to the right. The height of the 1st two rows in the fixed header section roughly doubles while the height of the scrollable section remains the same. The upshot is that the fixed part of the report is misaligned with the scrollable part (because the rows in the two sections don't have the same height). Only the 1st two rows in the fixed header grow taller - the other rows in the fixed header retain their original height.
Has anyone seen this problem or have an idea what is happening?
Thanks,
BCB
This is the style that is generated for one of the fixed header columns:
.a6
{overflow:hidden;
HEIGHT:100%;
WIDTH:100%;
font-style:Normal;
font-family:Verdana;
font-size:8pt;
font-weight:Normal;
text-decoration:None;
direction:LTR;
unicode-bidi:Normal;
text-align:left;
writing-mode:lr-tb;
vertical-align:Top;
color:Black;
word-wrap:break-word
}
View 4 Replies
View Related
Nov 7, 2006
Hi All,
I'm using VS 2005 to build a SQL Server reporting Services report. The wizard works great and prompts me to build my results query and then select fields to group the report by.
I'm using the 3 groups as follows:
Page: Product / Model name
Group: Serial No
Details: Orders
Here's the problem. I also want to show my order lines as there is another linked table connected to my order table which holds all order line items. Classic order - line example.
How can I modify the details section to show my line items, as well as not show empty rows when no line items exist?
Thanks!
View 1 Replies
View Related
