Passing DateTime Parameter To Subreport (Error)
Feb 21, 2007
Hi guys,
I have managed to pass a string parameter form the main report to the subreport with no problems, but when i try and use the same method to pass a datetime type, i am issued with the following error messase:
"[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜SubReportName€™: The value provided for the report parameter 'MasterDate' is not valid for its type."
I cant see why it work for strings, but not for datetime. Any suggestions will be very much appreciated
View 7 Replies
ADVERTISEMENT
Jul 29, 2015
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
View 2 Replies
View Related
Dec 9, 2005
Is it possible to pass a multi-value parameter from a master report to one or more subreports? If so, how?
View 12 Replies
View Related
Mar 9, 2007
I have a multi-valued parameter that I want to pass to a subreport. The values are 11, 12, 13, and 14.
So here's what I've done:
1. For the properties of the clickable field of the first report, I have gone to the Navigation tab and chosen the subreport in the "jump to report" pulldown.
2. Then I clicked on the Parameters button and added a parameter name for the multi-valued parameter I am trying to send. For the Parameter value, I have tried 11,12,13,14. I have also tried =Split(11,12,13,14)
3. On the subreport, I create a report parameter with the same name, data type is string, multi-value is checked, and the available values pulldown is populated by a query.
So I run the first report and click on the link that brings me to the subreport, but all the subreport shows is the results for 11, not 12, 13, and 14.
How can I get the second report to understand that I want it to show all the records related to 11, 12, 13, and 14? If I bypass the first report and simply use the drop-down to choose 11, 12, 13, and 14 in the subreport, it works fine. I just can't seem to figure out how to correctly have the first report tell the subreport that it wants 11, 12, 13, and 14.
Thanks in advance for any advice!
Dan
View 4 Replies
View Related
Sep 12, 2007
I have a main report and a subreport. Subreport is not at row level but is at report level. The sub report has a parameter that needs to be passed from mainreport. However, the subreport's parameter should be set and the subreport should be refreshed when the user clicks on a row in mainreport. Can I use drill-through / navigation feature in any way to build this functionality?
Any help will be most appreciated.
View 3 Replies
View Related
Sep 6, 2015
I have two reports 'Product Details' and 'Sales by Product'
When i click on 'Product ID' field in 'Product Details' report, It has to drill through to 'Sales by Product' which has a parameter 'Product ID' in it.Â
I have written the following javascript
="javascript:void(window.open('http://servername/Rportserver/Pages/Report.aspx?ItemPath=%2fTestDrillThru%2fSales+By+Product&rs:Command=Render&ChildProductID="& Fields!ProductID.Value &"','_blank',',resizable=1,width=1600,height=800,left=50'))"
When i drill through, field value is not passing to 'child product id' in sales by product. I have to give the value again in child report.
View 5 Replies
View Related
Feb 27, 2007
Is it possible to pass a DateTime parameter from a master report to a subreport. I have managed to pass a string, but when i pass a DateTime parameter some error regarding its type is thrown. Please point me in the correct direction. Many Thanks.
View 5 Replies
View Related
May 11, 2006
I'm developig an ASP.NET application and I'm trying to pass a datetime parameter into my stored procedure. The procedure is very simple "SET @sqlMessage = @parameterPassed" I have the @sqlMessage setup as out OUTPUT parameter and I'm trying to see what I get. So far no go. The datetime value is of type string, and it was retrived from a datetime column in an SQL database. Any ideas.
Thanks.
View 1 Replies
View Related
Jan 3, 2008
Hi Everyone,
The SSIS is behaving very strange to me in the below scenario (Do excuse me if that€™s the behavior, I might not be knowing).
What I€™m doing is,
Step 1: Select Max(Date_Created) from Table1 -> I€™m storing the result in a parameter named Max_Date_Created.
The above one returns the value as : 2008-01-01 10:10:10.874
Step 2: Update Control_Table Set Last_Updated_Date = ? -? I€™m passing the parameter for updating the control table.
Step 3: Select Last_Updated_Date from Control_Table
To my astonishment, it returns the value as 2008-01-01 10:10:10.000. Shouldn€™t it be 2008-01-01 10:10:10.874?
The above implementation taking me for the duplication entries in the table. How to get milliseconds also? Why it€™s rounding?
Any suggestions please?
Thanks
Selva
View 1 Replies
View Related
Jul 13, 2007
All,
I have two reports in my project. One is summary and the other is drill through. In Summary report I have StartDate and EndDate Parameters which are DateTime type. Language settings on my workstation are set to Canadian English, and so are in the IE. When I deploy the reports to the Sharepoint WebParts based reporting portal, the reports run fine individually. However, when I try to drill through from summary report to the detail report, the following error is displayed, where the StartDate is 13/07/2007 (Canadian format dd/MM/yyyy):
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
Why do the reports run fine individually? Obviously something is wrong with Report Server processing the parameters, that it converts the date format to US English only when passing parameters to drill through report. This problem is eliminated when I change the language settings to US-English on my workstation.
Any ideas how can this be fixed, if at all? It would certainly be not feasible to have all the users change their settings from Canadian to US-English.
Thanks.
View 6 Replies
View Related
Jun 12, 2006
Hello,
I'm attempting to pass a datetime variable to a stored proc (called via sql task). The variables are set in a previous task where they act as OUTPUT paramters from a stored proc. The variables are set correctly after that task executes. The data type for those parameters is set to DBTIMESTAMP.
When I try to exectue a similar task passing those variables as parameters, I get an error:
Error: 0xC002F210 at ax_settle, Execute SQL Task: Executing the query "exec ? = dbo.ax_settle_2 ?, ?,?,3,1" failed with the following error: "Invalid character value for cast specification". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If I replace the 2nd and 3rd parameters with quoted strings, it is successful:
exec ?= dbo.ax_settle ?, '3/29/06', '4/30/06',3,1
The stored proc is expecting datetime parameters.
Thanks for the help.
Mike
View 3 Replies
View Related
Jan 25, 2007
Hi
I am getting error while passing parameter in SSIS package
I am writing following query in sql command
select * from Mytable where empid in (select empid from testtable where empid = ?)
Error:
Parameter cannot be extracted from the SQL Command. The Provider might not help to parse parameter information from the command. In that case, use the "SQL Command from variable" access mode, in which the entire SQL command is stored in a variable.
can any body help me out
Thanks
View 1 Replies
View Related
Feb 7, 2005
Hi everyone,
I want to be able to pass an "ORDER BY" parameter into my stored procedure but I am receiving errors when I do. For example:
CREATE PROCEDURE GetFromTable
(
@SortOn varchar(20)
)
AS
SELECT *
FROM Table
ORDER BY @SortOn
GO
This is the error I get: Variables are only allowed when ordering by an expression referencing a column name. Any suggestions on what I can do to make this work?
Thanks in advance,
Piet
View 9 Replies
View Related
Jul 1, 2004
Hi,
I have a procedure that will save to table in sql server 200 via stored procedure. When I hit the save button it alwasy give me an error saying "Procedure 'sp_AddBoard' expects parameter '@dtmWarrantyStart', which was not supplied" even though I supplied it in the code
which is
Dim ParamdtmWarrantyStart As SqlParameter = New SqlParameter("@dtmWarrantyStart", SqlDbType.datetime, 8)
ParamdtmWarrantyStart.Value = dtmWarrantyStart
myCommand.Parameters.Add(ParamdtmWarrantyStart)
below is the stored procedure.
create Proc sp_AddBoard(@BrandID int,
@strPcName varchar(50),
@bitAccounted bit,
@dtmAccounted datetime,
@dtmWarrantyStart datetime,
@dtmWarrantyEnd datetime,
-- @strDescription varchar(500),
@intStatus int,
@ModelNo varchar(50),
@intMemorySlots int,
@intMemSlotTaken int,
@intAgpSlots int,
@intPCI int,
@bitWSound bit,
@bitWLan bit,
@bitWVideo bit,
@dtmAcquired datetime,
@stat bit output,
@intFSB int) as
if not exists(select strPcName from tblBoards where strPcName=@strPcName)
begin
insert into tblBoards
(BrandID, strPcName, bitAccounted,
dtmAccounted, dtmWarrantyStart,
dtmWarrantyEnd, --strDescription,
intStatus,
ModelNo, intMemorySlots, intMemSlotTaken,
intAgpSlots, intPCI, bitWLan,
bitWVideo, dtmAcquired,intFSB,bitWSound)
values
(@BrandID,@strPcName,@bitAccounted,
@dtmAccounted,@dtmWarrantyStart,
@dtmWarrantyEnd,--@strDescription,
@intStatus,
@ModelNo,@intMemorySlots,@intMemSlotTaken,
@intAgpSlots,@intPCI,@bitWLan,
@bitWVideo,@dtmAcquired,@intFSB,@bitWSound)
end
else
begin
set @stat=1
end
The table is also designed to accept nulls on that field but still same error occured.
Please help
View 1 Replies
View Related
May 7, 2008
I am doing report development against OLAP (Cube). I have a parameter which is a multi-value parameter, and I need to pass this as a parameter into a sub-report (pass all the values selected in this multi-value from the main report to sub report parameter).
Is this even possible? If yes how do I achieve this.
Currenty I sent like Fields!Region.Value(0), but I want to send actually Fields!Region.Value() (meaning all selected).
Any help ASAP is appreciated.
View 3 Replies
View Related
Nov 2, 2007
I am passing a date range to a subreport which is a table that I want to show a list of months in a specific range. I am passing:
FromDateShipedYearMonth - ([Date Shipped].[Month].&[2006]&[4]&[12]
ToDateShippedYearMonth - ([Date Shipped].[Month].&[2007]&[4]&[11])
I have parameters set up in my Main report:
<Subreport Name="subreport2">
<Parameters>
<Parameter Name="FromDateShippedYearMonth">
<Value>= "(" & Code.PreviousYear(Parameters!DateShippedMonth.Value) & ")"</Value>
</Parameter>
<Parameter Name="ToDateShippedYearMonth">
<Value>="(" & Parameters!DateShippedMonth.Value & ")"</Value>
</Parameter>
</Parameters>
And in my Subreport:
<ReportParameter Name="FromDateShippedYearMonth">
<DataType>String</DataType>
<Prompt>FromDateShippedYearMonth</Prompt>
</ReportParameter>
<ReportParameter Name="ToDateShippedYearMonth">
<DataType>String</DataType>
<Prompt>Year - Month</Prompt>
</ReportParameter>
</ReportParameters>
I would like to display data from 12/2006 through 11/2007. Instead I get a list of 1/2006 through 12/2006.
Any ideas?
View 1 Replies
View Related
May 16, 2007
I have two subreports on one master report who's parameters @ReportDate would be set to the same date each time the report is run. When i run the master report i get an error for each report that tells me that one or more parameters required to run the report have not been specified. How do i pass the parameter i want to use in both reports from the master report through to the subreports.
Thanks again!
View 3 Replies
View Related
Sep 21, 2007
I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report??
Thanks in advance
View 4 Replies
View Related
Jul 24, 2007
Hello everybody,
I'm trying to pass the values of a subreport matrix to my main report.
For example, I have a matrix subreport like this:
USA CANADA FRANCE GERMANY
Client1Sales $100 $200
Client2Sales $600 $50 $300
What I would like to do is to pass the USA Sales Amount of Client1 (e.g $100) to my main report.
Is there any way to do this?
Thanks in advance for your answers!
Zoz
View 2 Replies
View Related
Nov 10, 2015
I have two reports.
1. Main Report
2. Sub Report.
I have cascading parameters in 'Main Report'. When i try to pass cascading parameters in to sub-report, I could pass only 'first parameter' value to sub-report.Is there a way that i can pass cascading parameters to the child report?
View 4 Replies
View Related
Jan 25, 2008
Hello,
I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc.
But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error "
The parameter is missing a value"
Could anyone please help on this.
Thanks,
Chandroday
View 1 Replies
View Related
Feb 26, 2008
I'm not sure if parameters is the correct solution, but it's all I can think of.
I'm trying to use a "template" report with a graphic logo and some other standard layout to provide all my subreports with the same look. On the "default" subreport, I intend to have links to the other subreports, but I can't find a way to dynamically change the subreport shown by the Subreport item.
View 5 Replies
View Related
Jul 18, 2007
When inserting a subreport into the main report, the subreport parameters are not listed for selection in the subreport object property page. If I add the parameter names manually, the params are not properly passed to the subreport and I get a runtime error (Internal error, see log).
So I'm not able to link the subreport properly. Any Idea?
Both (local) reports reside in a DLL in the same namespace, which is not the default namespace.
View 3 Replies
View Related
Jun 4, 2007
Each time we add a new parameter to a subreport and we link the main report's fields to be the value's to the parameters for the subreport, we get an error message stating that the parameter for the subreport has not been specified. If we physically REBOOT the computer and then reload the project, the error seems to clear up.
Is this a bug in Reporting Services or is there some other explaination.
Thanks for the information.
View 1 Replies
View Related
Dec 3, 2015
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
View 3 Replies
View Related
Apr 19, 2007
Good day,
Is there any way one can pass a paramter to the subreport reportname box? I want to open a specific report based on selection criteria in the main report but cannot seem to find a way to pass a variable to the reportname of the subreport.
Please can someone help me?
Thanks in advance
View 10 Replies
View Related
Aug 29, 2007
Hi,
I have a subreport added to the main report and I want to make this report visible only when the parameter value is met.
Ex, I have a parameter CustName in the main report and want to show the subreport when the custName = xxxxx. There reports are parameter driven not data driven reports.
Any help is greatly appreciated.
Thanks,
Sirisha
View 3 Replies
View Related
May 11, 2008
How to pass master reports (fields!OrderId) value to a subreport as a parameter value.
if i right click the subreport control on the main report layout, i do see parameters tab, under that would like to pass the (fields!orderID).
Thanks for the info.
View 4 Replies
View Related
Jan 18, 2008
Hello,
I have a SP that recevies a date value for a users date of birth called "dob".
However when passing it into the class which contains the Stored procedure it gives an error.
Below is my code
please advice
Thanks
Ehi
1
2 command.Parameters.Add(new SqlParameter("@usernames", SqlDbType.Int, 0, "RegionID"));
3 command.Parameters.Add(new SqlParameter("@username", SqlDbType.VarChar, 20, "username"));
4 command.Parameters.Add(new SqlParameter("@First_Name", SqlDbType.VarChar, 50, "First_Name"));
5 command.Parameters.Add(new SqlParameter("@Last_Name", SqlDbType.VarChar, 50, "Last_Name"));
6 command.Parameters.Add(new SqlParameter("@dob", SqlDbType.Date, 50, "dob"));
7
8 command.Parameters[0].Value = 4;
9 command.Parameters[1].Value = "username";
10 command.Parameters[2].Value = "First_Name";
11 command.Parameters[3].Value = "Last_Name";
12 command.Parameters[4].Value = DateTime.Parse(dob.Text);
HERE IS THE ERROR MESSAGE
Compiler Error Message: CS0103: The name 'dob' does not exist in the current context
Source Error:
Line 40: command.Parameters[2].Value = "First_Name";
Line 41: command.Parameters[3].Value = "Last_Name";
Line 42: command.Parameters[4].Value = DateTime.Parse(dob.Text);
Line 43:
Line 44: int i = command.ExecuteNonQuery();
Source File: c:inetpubwwwrootcellulant1App_Codesignup_data-entry.cs Line: 42
View 7 Replies
View Related
Jan 18, 2008
hello,
I have a stored procedure being called from my class.
All values are ok, except for the DateTime value. What am i doing wrong here ? Am wondering if its the date size of 50 I put there or what ?
command.Parameters.Add(new SqlParameter("@dob", SqlDbType.DateTime,50, dob1));
Error Message
Compiler ErrorMessage: CS1502: The best overloaded method match for 'System.Data.SqlClient.SqlParameter.SqlParameter(string, System.Data.SqlDbType, int, string)' has some invalid arguments
thanks
Ehi
View 3 Replies
View Related
Apr 1, 2003
While debugging a stored proc in Sql Query Analyser i have to pass value to stored proc param which is of datatype datetime
i passed it as '03/31/2003'
it's giving error "[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification"
if i make it null it's working fine
pls suggest which date format value supposed to supply for datetime param to run debugging successfully
View 7 Replies
View Related
Nov 3, 2015
I am trying to create a report with a sub report in Sql Server 2012 using Report Builder Version 3. Â I can run the subreport without any problems. Â I read where using a shared connection can cause this error so both the main report and the subreport use a connection that is embedded in my report. Â
For testing, I created the subreport without a parameter and added it to the main report. Â When I ran it that way, the report worked and sub report displayed the data. Â So I know it can read from the database.It seems to only give me this error when I am trying to tie the two reports together using a parameter. Â
View 2 Replies
View Related
Jul 14, 2015
Using SSRS 2014 and VS2013 rc5.
How do I hide a subreport if the parent report row containing the subreport is a certain value? I am attempting to create a statement with ageing buckets. In the main body of the report I have to display payments and invoices. If the invoice row is blank, I need to hide the row containing the subreport.
First, Is this even possible?
Second, How?
View 10 Replies
View Related
