I want to select rows that have an integer value IN a parameter list value
I want to pass an integer list to my tableadapter's select
as in Select * from sometable
Where myIntValue IN (@intParamList )
I cannot figure out how to get my list into @intParamList
It works fine as a single value - eg 3, but how do I set it to 1,2,3 ?
Thanks
Bill
A little new to ASP.NET pages, and I'm trying to pass some parameters to a SQL 2000 Server using a TableAdapter, code is as follows:
------
TestTableAdapters.test_ModemsTableAdapter modemsAdapter = new TestTableAdapters.test_ModemsTableAdapter();
// Add a new modem
modemsAdapter.InsertModem(frmRDate, frmModem_ID, frmProvisioning, strDecESN );
--------
And the error I get when loading the ASP.NET page is as follows:
Compiler Error Message: CS1502: The best overloaded method match for 'TestTableAdapters.test_ModemsTableAdapter.InsertModem(System.DateTime?, string, string, string)' has some invalid arguments
---------------
Now I realized the four strings that I am trying to pass to the server refer to ID's on Textboxes on the web page. Not sure if that might be the problem for databinding... ? Or is it my statement for the adapter?
-Ed
Hello, I'd greatly appreciated if someone can help me out on this problem:
I'd like to pass a string (which is a multiple value in this case - "Smith", "Lee", "Jones", "Hanson") as an input parameter to a stored procedure. I'd like to use this string as part of the select statement:
exec sp_GetLN "smith, lee, jones, hanson"
In the stored procedure:
@strLN varchar <- "smith, lee, jones, hanson"
/*What do I need to do here to SET/REPLACE the original string so that the syntax can be accepted by the select statement??*/
SELECT * from tblCustomers
WHERE LASTNAME IN (@strLN)
It looks simple but I've been trying to get the syntax to work. What can I do to change the quote from ' to "?? Can I use char(34) like VB??
Your help is greatly appreciated~
Thank you
I want to do something like this in a stored proc:------Create Procedure dbo.GetPatients@PatientIdList varchar(200) -- comma separated list of PatientIDsAsSelect *From PatientsWhere PatientId In (@PatientIdList)------I know the above won't work, but of course what I want is if@PatientIdList = '1,2,3' then I want Patient records with PatientIds1, 2, and 3 returned.It looks like the only way to do this is to build the SQL statement asa string within the stored procedure ... which pretty much defeats theusefulness of using precompiled sprocs as I understand it (better offbuilding a dynamic query against a View in that case).Thoughts?Joel Thornton ~ <groups@joelpt.eml.cc>
View 1 Replies View Related
I have a custom list(say a list for account numbers, account numbers starting with 13 form a group, then starting with 14 form a group and like that)
and then there are tables inside this list. the report will be displayed based on the values of this custom list.
i also have a drill through report for this. now when i pass fields!accountnumber.uniquename for this list only the first of the group values say 130001 is selected..
what shud i do to select the whole grp??
thanks!
Hi, I m using sql 2005 as a back end in my application...
I am useing Store procedure..for my data in grid..
ALTER PROCEDURE [dbo].[ProductZoneSearct]
(
@Productid char(8),@Proname char(8),@radius int,@mode varchar(5) = 'M',@Zone nvarchar(1000),)
ASSET NOCOUNT ON;Create Table #Product (ProductID int, TimeEntered datetime, DateAvailable datetime, Productname varchar(80), City varchar(50), State char(4),Miles decimal, Payment varchar(40),UserID int, Phone varchar(15))
Insert #Product Select ProductID , TimeEntered, DateAvailable, Productname ,City,State,miles,Payment ,Miles, UserID, Daily, PhoneFrom [tblproduct] Where city IN (@Zone)
Select ProductID TimeEntered, DateAvailable, Productname City,State,miles,Payment ,Miles, U.Phone As phoneNumber, Company, , L.Phone As cmpPhone From #Product As L Left Join (Select UserID, Company, Phone, From [User]) As U On U.UserID = L.UserID Order By DateAvailable
if i pass value in "where city in (@Zone)" and @Zone ='CA','AD','MH' then it can not get any result..but if write where city in ('CA','AD','MH') then it give me perfact result..
I tried to below syntax also but in no any user Where city IN ('+@Zone+')
In short if i pass value through varibale (@Zone) then i cant get result...but if i put direct value in query then only getting result..can anybody tell me what is problem ?
Please Hel[p me !!!
Thank you !!!
Hi..
I m working on MS SQL Server 2000.
I am trying to pass a list of numbers to a stored procedure to be used with 'IN()' statement.
I was doing something like..
Create Procedure proc
(
@Items varchar(100) --- List of numbers
)
AS Begin
Declare @SQL varchar(8000)
Set @SQL =
'
Select Query......
Where products IN (' + @items + ') '
'
Exec (@SQL)
This stored procedure is working fine, but when i m adding more required stuff to that, the size exceeds 8000, & it gives the error "Invalid operator for data type. Operator equals add, type equals text."
Can any1 please help me out with this ASAP??
Working on a new database where the Date and Time are stored in a Date Time Field.
Then working on an OLDER database file within the same SQL Database contains these 2 items as integers:
transDate = "71615" (July 16, 2015)
transTime = "12345" (01:23:45 AM)
How do we convert both of them into a single SQL DateTime field such as "2015-07-16 01:23:45.000" so that it can be used in a join restricting to a date time in a different SQL File that properly has the DateTime in it?
This works well for converting the transDate Part in the select statement:
  dbo.IntegerToDate(at.transDate) as transDate
  * That returns: "2015-07-16 00:00:00.000"
* The resulting data must work directly in a Microsoft SQL Server Management Studio Query using either using the "on" statement or part of the "where" clause. In other words, NOT as a stored procedure!
Also must be able to be used as a date difference calculation when comparing the 2 files Within say + or - 5 seconds.
Here's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
Ok, just made a TableAdapter and the SELECT statement works fine and pulls data. But doing an INSERT is something different, it craps out wanting a login.
No neat Wizard (or so I haven't found yet) that lets me give the TableAdapter the login info for the SQL Server, which I have.
Do I need to write code with the login and password for the SQL connection instead?
-Ed
Hi,
I have a TableAdapter created in a Dataset. I'm creating a search function for a table, and here's how my code looks like in the "Add Query" wizard:
Select * from Event where eventname like '%@EventName%'
But when I click on preview data, I do not get the prompt to enter a value for the @EventName parameter, where went wrong?
What's a good way to work with Blobs and TableAdapters, in terms of declaring compatible column types in SQL Server and DataTable fields?
View 2 Replies View RelatedThis thread has also been posted under '.NET Data Access and Storage'. However, I have realized that the same code contruction using SQL Server connection- and tableadapter objects work fine so I am trying to get answers here also.
I am attempting to do transactional updates to SQL Compact Edition database using TableAdapter and TransactionScope like this:
using (TransactionScope ts = new TransactionScope())
{
SqlCeConnection sqlConn = new SqlCeConnection(connectionString);
myTableTableAdapter ta = new myTableTableAdapter();
ta.Connection = sqlConn;
ta.Update(dsmyTable.myTable);
ts.Complete();
}
dsmyTable is a strongly typed dataset created through the Dataset Designer and populated with data from the database prior to the code sample above.
This all works fine. However, when removing the call to 'ts.Complete()' to simulate the transaction rolling back, data is still stored into the database.
Am I missing something here or does TransactionScope not support SQL Compact Edition? Any help is appreciated!
Regards.
Hello,
I want to do something like this in a TableAdapter's SQL Statement:
SELECT Type.*
FROM Controllers INNER JOIN
@Type AS Type ON Type.ConfigurationId = Controllers.ActiveConfig INNER JOIN
Tank ON Controllers.ControllerId = Tank.ControllerId
WHERE (Tank.TankId = @TankId)
But I get an error because of the @Type variable. Is there any other way to choose a table in a TableAdapter with variables?
Thanks for your help!
I created a new DataSet object using the
wizard and had no probs, it's very straightforward. I created a
GetProducts() method and also added a GetProductCount() method. I
read somewhere that when the DataSet is saved, it will generate the
TableAdapter classes and store them in the project nested under the
DataSet object. This isn't happening, the files aren't there and
yes I'm displaying all files. There *is* however the TableAdapter
class but it's in not in the project, it's a temporary file w/ the
following path:
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET
Fileswebsitef38f8b5500014aeSources_App_Codepw_products.xsd.72cecc2a.cs.
I saved the DataSet several times, compiled the entire solution and
even closed the solution yet this temporary file isn't getting saved
where it should be. Does anyone have any ideas abt this?
I'm eager to start developing my DAL and def want to use these
TableAdapter classes.
Thx in advance,
-Pete
hii am using the nothwind database for a current exercise, i am wanting to user to be able to search for products based on two input methods (product name, category).here is the code i currently have: SELECT DISTINCT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued, ProductName, ProductID, CategoryIDFROM ProductsWHERE (CategoryID = @categoryID) OR (ProductName LIKE '%' + @ProductName + '%')i'm wanting to have it set so the user can use both input methods, or either, when one input method is used by the user it works fine, but when both are used it generates results for 2 seporate queriesi'm wanting to have it set so the user can search by product name in certain categories (when both search input methods are used)how would i go about doing this? is there some kind of equivalent to an AND/OR statement?eg. WHERE (CategoryID = @categoryID) AND OR
(ProductName LIKE '%' + @ProductName + '%') thanks in advance!
Below is my code right now Im using a direct sqlconnection for each request. I would like to use Tableadapters and/or my BLL code like the rest of my sites pages. I cant find how to do this progamatically and using the xmltextwriter. (Also i need to be able to name the xml output nodes like below)Thanks for the help.NeilPrivate Sub GetAllEvents(ByVal SqlString)    Response.Clear()    Response.ContentType = "text/xml"    Dim objX As New XmlTextWriter(Response.OutputStream, Encoding.UTF8)    objX.WriteStartDocument()    objX.WriteStartElement("Events")    Dim objConnection As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|*********.mdf;Integrated Security=True;User Instance=True")    objConnection.Open()    Dim sql As String = SqlString    Dim objCommand As New SqlCommand(sql, objConnection)    Dim objReader As SqlDataReader = objCommand.ExecuteReader()    While objReader.Read()      objX.WriteStartElement("Event")      objX.WriteAttributeString("EventId", objReader.GetInt32(0))      objX.WriteAttributeString("EventName", objReader.GetString(1))      objX.WriteAttributeString("EventDescription", objReader.GetString(2))      objX.WriteAttributeString("EventDate", objReader.GetDateTime(3))      objX.WriteAttributeString("CurrentDate", Date.Now.ToString)      If Not objReader.IsDBNull(12) Then        objX.WriteAttributeString("EventImage", objReader.GetString(12))      End If      objX.WriteEndElement()    End While    objReader.Close()    objConnection.Close()    objX.WriteEndElement()    objX.WriteEndDocument()    objX.Flush()    objX.Close()    Response.End()  End Sub
View 2 Replies View RelatedHey fellas. Here's my situation. I have two textboxes where the user enters a "start" date and an "end" date. I want to search a table to find records who's "expired" column date is between those two dates provided by the user. The tricky part is, if the user just puts a start date in but no end date, I want it to search from whatever start date the user entered to the future and beyond. Essentially, I think I'm looking for a SQL statement along the lines of:
SELECT Request.RequestID, Request.URL, ActionProvider.Name, Request.CurrentStageID, Request.Decision, Request.SubmissionDate,
Request.ExpirationDate
FROM Request INNER JOIN
RequestSpecificActionProvider ON Request.RequestID = RequestSpecificActionProvider.RequestID INNER JOIN
ActionProvider ON RequestSpecificActionProvider.ActionProviderID = ActionProvider.ActionProviderID INNER JOIN
RoleActionProvider ON ActionProvider.ActionProviderID = RoleActionProvider.ActionProviderID INNER JOIN
Role ON RoleActionProvider.RoleID = Role.RoleID
WHERE
CASE WHEN @BeginDate is not null AND @BeginDate <> ''
THEN Request.ExpirationDate > @BeginDate
END
AND
CASE WHEN @EndDate is not null AND @EndDate <> ''
THEN Request.ExpirationDate > @EndDate
END
AND (Role.Description = 'Requestor')
I realize my code isn't correct and there's still a floating "AND" out there I would have to put some logic around. Anyway, how do I do this? Do I need to build three separate queries in my tableadapter (one for if both dates are provided, one for if start date is provided, one for if end date is provided) and build the logic in my application code or can I tackle it with SQL? If I can tackle it with SQL, where have I gone astray? I'm currently getting the error: "Error in WHERE clause near '>'. Unable to parse query text."
Thanks for the help everyone!
Hello,
I'm trying to setup a typed dataset with a table adapter in .NET 2.0, and the problem I am having is that I cannot get the table adapter to use existing connection strings setup in the web.config file. How can I get it to do so? It doesn't see the connection strings, and so it wants me to create a new connection, which I don't want to do.
I like to run a query from my tableadapter, but if i insert a row i like to know the id of it.So i was looking on asp.net and found a tutorial for it. But it doesnt work!
My inset query:
"INSERT INTO Klanten (BedrijfsNaam, Contactpersoon, Adres, Postcode, Woonplaats, Telefoon, Mobiel, [E-mail], Website, Kvk, BTWnr)VALUES (?,?,?,?,?,?,?,?,?,?,?);
Select SCOPE_IDENTITY()"
As database i user MS SQL Express.Also i tried it with @@Identity, but that works eighter.If i try the insert code with the scope identity above, and i put it in the Query builder from MS Visual Studio, it returns an error.. :
"The following errors were encountered while parsing the contents of the SQL pane:
Unable to parse query text."This error is only there if i add scope_idititiy or @@identity to it.Also if i run it in the SQL part of SQL Studio Express i get the same error.
So should i change this?Or how can i get the id of it ?Of course i can read the database after the insert, but its not save enough i think.
If this is the wrong forum, please let me know.
Using .NET Compact Framework, VB.NET, SQL Server CE 3.0
I use tableadapter.update in many places throughout my application. The user can save a record by click on a menu item called Save.
I call this code:
Private Sub Save
bindingsource.endedit
tableadapter.update(me.dataset.datatable)
End Sub
In most places the code works fine. It saves updates to the table. However, in two tables it is not working. It does not throw any exceptions, but does not save the record.
The subs that work and the ones that dont are coded exactly the same.
Thanks for any help
Ryan
Hi,I always use the following sql statement to check whether an email address exists in a database. With my latest project I tried to do this within the TableAdapter Configuration Wizard and it gave me an error: IF NOT EXISTS (SELECT Email FROM tblEmailList WHERE Email=@Email) BEGIN INSERT INTO tblEmailList (Email, DateRegistered) VALUES (@Email, @DateReg) SELECT 1 AS RESULT END ELSE BEGIN SELECT 0 AS RESULT END first it gave an error saying I must declare the variables @Email and @DateReg then when I removed the part of insert and just wanted to check the email address existence it gave me this error:The Compound statement SQL construct or statement is not supportedAny idea anyone?
View 5 Replies View RelatedI am designing my first database (Visual Basic & SQL Server Express 2005) and it appears as if the database isn't updating. I am running it by hitting F5, closing by hitting the "X" and then hitting F5 again to check if the changes have stuck. They don't. These are the instructions given in the tutorial.
Any ideas? Thanks.
In particular I have tried two step-by-step tutorials distributed by Microsoft: 1. Absolute Beginner's Video Series, Lesson09; and 2. the Help tutorial: Managing Your Records (ms-help://MS.VSExpressCC.v80/MS.NETFramework.v20.en/dv_vbcnexpress/html/1ccdb8f1-4162-4a54-af17-231007eb529b.htm)
The code for the form is:
Public Class Form1
Private Sub AddressesBindingNavigatorSaveItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AddressesBindingNavigatorSaveItem.Click
Me.Validate()
Me.AddressesBindingSource.EndEdit()
Me.AddressesTableAdapter.Update(Me.FirstDatabaseDataSet.Addresses)
End Sub
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosingEventArgs) Handles Me.FormClosing
Me.AddressesBindingSource.EndEdit()
Me.AddressesTableAdapter.Update(Me.FirstDatabaseDataSet.Addresses)
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'FirstDatabaseDataSet.Addresses' table. You can move, or remove it, as needed.
Me.AddressesTableAdapter.Fill(Me.FirstDatabaseDataSet.Addresses)
End Sub
End Class
Hi there,
i have a problem with my smart device application that i develop.
To simplify:
1) C# smart device appliccation
2)a database file *sdf
3)a typed dataset using the wizard to do so
4)TableAdapter with connection string with no problems(cool)
5)use of Insert method that returns 1 ( also cool) [--> MyTableAdapter.Insert("blabla","blablabla"); <------]
6)no saved records in the DB file(baaaaaad)
Plz any help would be appreciated.
Dimoklis
Software Developer
My TableAdapter wizard will not write the update and delete stored procedures and I do not know why. Any thoughts?
View 1 Replies View RelatedHi,I have a table adapter that I am using to call a stored procedure on a SQL server database to insert a record.Everything works ok, except I cannot figure out how to pass a null value to a DateTime field. In my SQL server database, the column allow nulls. In my typed dataset, the column is set to allow nulls.When I try to run the insert procedure with a null value: ListTableAdapter da = new ListTableAdapter();
da.InsertList(System.Data.SqlTypes.SqlDateTime.Null, Name); I get this error: Error 14 Argument '1': cannot convert from 'System.Data.SqlTypes.SqlDateTime' to 'System.DateTime?I've also tried passing it DBNull.Value, but I get an exception with that too.Can anyone steer me in the right direction with this?
Hello,
I have a query that works in query analyzer; it looks that a certain date is between the start and end date of a certain value. I also have a status field, which can be null, but if provided, provides the appropriate status to filter by.
Again, the query works in QA, but not in the application. I test in SQL by using start date = '1/1/1900', end date = '12/31/9999', and status = null. Results are returned. But, not when the results are done through code. In code, I set the begin date to new DateTime(1900, 1, 1), the end date to DateTime.MaxValue, and the status to a null string. But, no results are returning. Why isn't that mapping over correctly? In the function, it has the two dates as Nullable(Of DateTime), which I provide a date, and the string is getting passed Nothing.
Any ideas? Can't post any code on this one...
Thanks.
I have a stored procedure which returns 3 different kind of values. I am checking whether a certain value entered by user is present in one of the columns of database table. Accordingly the SP returns 1 if present, -1 if not present and third value is SQL server 2005 error.But the problem is that I am only getting -1 everytime even if the value is present.I executed the SP alone to find out if it is the one which is returning the INCORRECT value. I found that that SP is returning the correct value.Therefore I came to the conclusion that it is the Table ADapter which got corrupted.I deleted the TableAdapter and created it again, but then it didn't solve the problem.I have now run out of ideas.
The code of the SP is:ALTER PROCEDURE spcheck_ServerName
(@Server_Name nvarchar(50)
)
ASDECLARE @Result int
IF EXISTS
(
SELECT
NULL
FROMServerDetails WITH (UPDLOCK)
WHERE
[SERVER NAME] = @Server_Name
)
BEGINSELECT @Result = 1
END
ELSE
BEGIN
SELECT @Result = -1
END
IF @@ERROR <> NULL
BEGIN
SELECT @Result = @@ERROR
END
RETURN @Result
And I am calling the tableAdapter method in the code behind file of the web form in the following manner:private int chkServerName(string sname1)
{
try
{Serverlist1TableAdapters.SERVERDETAILSTableAdapter nwAdapter = new Serverlist1TableAdapters.SERVERDETAILSTableAdapter();
int snval = (int)nwAdapter.spcheck_SName(sname1);return snval;
}catch (Exception ex)
{return ex.GetHashCode();
}
}
Any help will be greatly appreciated.
I've added a typed DataSet and dragged a table across from the server explorer. When I click configure on the table adapter, then click previous back to the "Choose Your Data Connection" dialog. The only option is the new connection that was just created when I added the sql server to the server explorer. Is there anyway to reuse my existing web.config connection string? My goal is to have a single connection string in my web.config.
Thanks.
-David
I'm sorry, this question has a pretty long preamble, but bear with me as this will fully explain my problem, and save a number of clarification questions.I am using Visual Web Developer 2005 Express, with SQL Server 2005. After reading a Microsoft article saying that it was much better to use a three tier architecture with data adapters than to write explicit queries, I have used this approach extensively, and generally it works very well. Typical code patterns are: - Dim taPassenger As New ShippingTableAdapters.VPassengerTableAdapter Dim tbpassenger As Shipping.VPassengerDataTable Dim trpassenger As Shipping.VPassengerRow ..... ' to process all passengers from a voyage: - tbpassenger = taPassenger.GetDataByVOYid(Voyageid) For Nbr As Integer = 1 To tbpassenger.Count trpassenger = tbpassenger(Nbr - 1) ' I now have the row available in properly-typed fields, eg trpassenger.vpxName ... Next ' to read and process a single passenger tbpassenger = tapassenger.GetDataByVPXid(VPXid) trpassenger = tbpassenger(0)The table adapter has been created with Insert,Update, Delete methods. Thus you can assign values to row fields, and then update the row: - trpassenger.VPXName = "New Name" .... tapassenger.update(trpassenger)There are actually several overloads of the update method: you could have written a field list, like this, where the names (VPXid etc) would be defined in my program as variables of the appropriate type for the corresponding column. tapassenger.update(VPXid, VPXName, VPXAge, ....HOWEVER, this doesn't work properly if you have non-string data that could be null. Thus if the fourth field is a foreign key that could be null, if you write Dim VPXVoyId as Nullable(of GUID) VPXVoyid = nothing tapassenger.update(VPXid, VPXname, VPXAge, VPXVoyid, ...or Trpassenger.VPXVoyid = Nothing tapassenger.update(trpassenger) you do NOT put a null value into the database. Instead you store a value of "00000000-0000-0000-0000-000000000000". You can solve this annoying problem in two ways: -A. If you will ALWAYS be storing a null value at this point of your program, then simply write the update statement like this: - tapassenger.update(VPXid, VPXname, VPXAge, Nothing, ...Here "Nothing" actually means "DBNull" even though it doesn't mean this when used in a normal VB assignment (and neither does DBNull).B You can use the SetxxxxNULL method: - If trpassenger.VPXVoyid = nothing then trpassenger.SetVPXVoyidNull End If tapassenger.update(trpassenger) Thus when the program logic is complex and there are many paths to the update statement I will often put statements such as this in front of the update statement, using SetxxxxxNull for all non-string values that may be null. You don't need to worry about string values because the Nullvalue property can be used to simply say that Null values are empty, and it all works properly, but for reasons unknown Microsoft have prohibited this for other data types. Now at last we get to my question, which is "How do I do the equivalent for an Insert?" tapassenger.insert does not have any overloads, and the only form is tapassenger.insert(field list). But this creates the problem above: if VPXVoyid = nothing then I insert the not-null value of "00000000-0000-0000-0000-000000000000". If I COULD use the form tapassenger.insert(trpassenger), then I'd have another problem: if you haven't set trpassenger (for example with trpassenger = tbpassenger(0)) then it will not exist, so you will get an exception when you try to reference it. Yet you can't write If isnothing(trpassenger) then trpassenger = new shipping.vpassengerrow) (I've tries this both as an assignment, and as a Dim statement) end ifSo far I can think of only two solutions, both awful: -a/ Use multi-choice logic to choose an appropriate insert statement. If there is only one or two possibly-null fields, I could write:- If field4 = nothing then trpassenger.insert (VPXid, VPXname, VPXAge, Nothing, .. However if there is more than one possibly-null field, you need (2 to the power of nbr-of-possibly-null-fields) insert statements, with of course a lot of testing to choose which oneb/ I could insert the record with nulls, then read it back and update it. Surely there is a better way! Help! Thank you, Robert Barnes.
View 2 Replies View RelatedI have a Stored Procedure
CREATE PROCEDURE test
AS
BEGIN
SELECT Count(*) FROM dbo.test
END
I can using the unbox get the return value
but if i direct return a value form a Stored Procedure like this
CREATE PROCEDURE test
AS
BEGIN
return 100
END
I can not get the VALUE
I do not know how to
Please Help Me
thx
I have a Stored Procedure
CREATE PROCEDURE test
AS
BEGIN
SELECT Count(*) FROM dbo.test
END
I can using the unbox get the return value
but if i direct return a value form a Stored Procedure like this
CREATE PROCEDURE test
AS
BEGIN
return 100
END
I can not get the VALUE
I do not know how to
Please Help Me
thx