Passing Parameter To Another Report Using Jump To URL Option In Reporting Services 2005
Sep 10, 2007
Hi,
I tried to pass parameter from one report to another report. I can send the parameter using following option:
I used jump to url option and write the following expression:
="javascript:void(window.open('http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=%2fNextGen+Reports%2fMAUA%2fSales+Order+Detail&rs:Command=Render&SalesOrderNumber="+Fields!SalesOrderNumber.Value+"'))"
and it shows me the following in browser url
http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=/NextGen+Reports/MAUA/Sales+Order+Detail&rs:Command=Render&SalesOrderNumber=SO43667
now the problem is how to get this ordernumber in my report any option ???pls urgent...any javascript function to take this no into my another report
View 37 Replies
ADVERTISEMENT
Apr 24, 2008
Hi all, Hope someone can help me on this. I have a dataset from a stored Procedure which I am displaying on a table, I am using the option from the navigation tab "jump to report" from one of the Textboxes in the table. But I want to use the same set of data but filtered with the selected option on the table. I already have parameters for the Stored Procedure passing them to the "jump to report". But I just cannot figure out how to pass the set data set but filtered for my next report. Is there a way to do this.Or do I have to create another version filtered of the stored procedure used for the original. Ideally, it would be great to use the same dataset but filtered. Hope my question make sense. Thanks in advance jard
View 14 Replies
View Related
May 25, 2015
I am trying to pass more then one parameter from URL , Below is my URL
="javascript:void(window.showModalDialog('http://in-mh-co-dt0030/ReportServer_SQLSERVER2012TAB/Pages/ReportViewer.aspx?%2fTest%2fProduct_WiseV1.0&rs:Command=Render&Lob="+Fields!Line_of_Business.Value+"&Year="+Sum(Fields!Year_list.Value,
"Year_Param_DS")+"', ''))"Â
 Lob parameter is in the same dataset , But Year parameter is from different Dataset(Year_Param_DS).But If I am passing second parameter (Year) like Sum(Fields!Year_list.Value, "Year_Param_DS") i am not able to open the popup.
If i am removing the sum word Main report is giving an error that "Report item expressions can only refer to fields within the current dataset scope or, if inside an aggregate, the specified dataset scope."e syntax (I am working using MDX query) to pass two parameter through url, one from same dataset and 2nd is from another dataset.Or it is not possible to pass the value field from other Dataset in URL (Go to URL option).
View 2 Replies
View Related
Mar 31, 2006
I have a Report that I want to access that has a parameter input for the date, Production_Date. I want to allow the user to use the DateTimePicker to select the date to use for Production_Date. I can't seem to find the correct way to format what I'm tring to do. My production date field is in a format without punctuation so that it becomes:
Dim ProductionDate = ((DateTimePicker1.Value.Month * 1000000) + (DateTimePicker1.Value.Day * 10000) + DateTimePicker1.Value.Year)
which gives me a value that I want to send as a parameter for the Reporting Services report that I have located on a tab in my project. The report is:
Me.ReportViewer1
I want to send the ProductionDate to the report where the report looks for Production_Date. Obviously, I 'm very new to this. I'd appreciate any suggestions. As it runs now, the default date is loaded (today's date) from the expression I calculated in Reporting services:
=(Now.Month*1000000)+(Now.Day*10000)+Now.Year
This is a big roadblock right now and I can't seem to put together a legal means to pass this value. Thanks for any help.
View 8 Replies
View Related
Jul 9, 2007
Hi,
There is a .net application which has a screen with four options(text boxes)
Each of these should take to reports generated by SQL REp Services
This is the requirment
The School selected in the App should be passed on to the report
How should I pass the parameter in my report
so that when user selects a link or text box report for that particular school number is displayed
Thanks
sowree
View 3 Replies
View Related
Apr 28, 2008
I have a report that uses report parameters and navigation in the textbox.
When I click in the textbox, it jumps to the same report, but I cannot see the report parameters any more(hidden ). I cannot change the report parameters.
When I use only the report paramenters (no navigation option), they appear always during the run time.
How can I do to keep the report parameters visible all the time using "jump to the same report"??
Thank you so much. indyw
View 6 Replies
View Related
Jul 29, 2015
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
View 2 Replies
View Related
Dec 3, 2015
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
View 3 Replies
View Related
Mar 2, 2007
Hi
Is it possible to set a "jump to report" option where the user can select which report to jump to from a list. E.g
If I click on the Company field it allows me to select to either jump to the company sales report OR the company purchases report
thanks
View 1 Replies
View Related
Sep 28, 2011
I am trying to run the report by passing the parameters using url.
[URL]
I get the error when I add the "Year" parameter in the above url, after adding this I get error "The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
[URL]
View 2 Replies
View Related
Jan 3, 2008
Has anyone encounted a problem with Reporting Services (2005) with the following scenario:
A report with a dropdown parameter allowing a Select All choice -
If the selection list is fairly long and Select All is selected - if the user clicks the View Report button the selection list is completely reset (i.e. all items are unselected). This seems to happen if the user quickly clicks the View Report button immediately after clicking the Select All box on the parameter dropdown.
This happens inconsistently - some users experience it frequently while others do not see it at all (using the same parameter values, etc.)
View 1 Replies
View Related
Sep 21, 2004
Is it possible to pass a report parameter that is defined as a string to the following SQL statement that is using an "IN" clause ?
WHERE (ANALYST.User_Bemsid IN (@Report_Parameter_Bemsid))
If I pass a single value (I.E. A) it works okay, but once I try to pass multiple values (I.E. A,B or 'A','B') it returns no data.
Using Crystal reports I can pass multiple values via a report prompt into the SQL "IN" clause and seems that SQL Reporting Services should also have this feature. What do I need to do to get it working ?
Thanks for any help...
View 4 Replies
View Related
Sep 24, 2007
Hello,
I'm trying to rertieve specific RS 2005 report by passing WebApp control value (this.VCtrlNo.Text) to "CV Report" - name of my report with the following scripts.
1) No Action - when clicked. AutoPostBack is set and properly initialized.
Page.Response.Write("<script>window.open('http://localhost/Reports/Pages/Reports.aspx? /Reports+Folder/CV+Report&vctrlno=" + this.VCtrlNo.Text + "','_blank');return false; </script>");
2) This just opened the default page instead of specific report.
<a href="http://localhost/Reports/Pages/Report.aspx?ItemPath=%2fReports+Folder%2fCV+Report&rc=Render&vctrlno=10-0000037", target="_blank">Open CV Report
</a>
Where "Reports" is the reportmanager, vctrlno is the parameter name (properly set) and obviously I want to open a new page.
I would be very thankful to anyone who can lead to make this work.
Thanks
Jj
View 3 Replies
View Related
Sep 16, 2015
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level**  and        **Salesamount**. Â
Values are like Â
**[-]category** Â Â Â Â Â Â Â **100**
  **[-]subcat**       **50**
     **product**      **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
View 3 Replies
View Related
Sep 6, 2015
I have two reports 'Product Details' and 'Sales by Product'
When i click on 'Product ID' field in 'Product Details' report, It has to drill through to 'Sales by Product' which has a parameter 'Product ID' in it.Â
I have written the following javascript
="javascript:void(window.open('http://servername/Rportserver/Pages/Report.aspx?ItemPath=%2fTestDrillThru%2fSales+By+Product&rs:Command=Render&ChildProductID="& Fields!ProductID.Value &"','_blank',',resizable=1,width=1600,height=800,left=50'))"
When i drill through, field value is not passing to 'child product id' in sales by product. I have to give the value again in child report.
View 5 Replies
View Related
Nov 20, 2015
I have a report that prompts the user to select a parameter, for simplicity, let's say the parameter is for color choice, options are Red, Yellow, Blue or *. The * is for include all colors. I am passing that parameter back to the dataset query which, again for simplicity is
select
Hue from AvailableColors
whereColor
= @ColorParam.
For a specific color this works fine, for the "*" selection it returns a null. It would seem that I need to convert the * to % but I am not sure how.....
View 6 Replies
View Related
Jun 17, 2015
I am trying to test the concept of passing multi value parameters from one report using the Action Property of a textbox to open another report is a new Window with the Multi Value parameter values already passed. The test involves the following:
Report 1:
1. Multi Value Parameter @ReportParameter1 has three Values: Value1, Value2, Value3
2. Has a text box with the Action Property set to Go to URL with the following Expression:
="javascript:void(window.open('http://reportserver/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReport2&rs:Command=Render&ReportParameter1="
+ JOIN(Parameters!ReportParameter1.Value,"&ReportParameter1=") + "'))"
Report 2:
1. Has Two Parameters @ReportParameter1 and @ReportParameter2
2. @ReportParameter1 has Available Values as follows:Â Value1, Value2, Value3
Does not have any default Values.
When I click on the textbox on Report1, it does navigate to Report2 but none of the Values are being set.
View 3 Replies
View Related
Aug 13, 2015
we are using SSRS 2012.Oracle 9i as back end database. Select A,B,C from view where A in (Param1) in above query when I am passing 1 value getting output in 30 sec. when I passed two values getting time out error in SSRS. how to pass multiple values in Oracle 9i in SSRS report.
View 4 Replies
View Related
Sep 10, 2015
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
View 7 Replies
View Related
Aug 10, 2015
I am using report builder 3.0.
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
View 5 Replies
View Related
Apr 22, 2015
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.Â
Is this a bug in Visual Studio? How do I get around this?Â
View 3 Replies
View Related
Sep 7, 2007
Is it possible to parm in a value to a SSIS
in my SSIS i have a variable;
Name : FileName
Scope : PackageName
Type : String
Value : ""
I have tried adding the following code in my vb.net project ;
pkg.Variables("filename").Value = "C: emp estfile.001"
pkg.execute()
but come up with the following error
A first chance exception of type 'System.MissingMemberException' occurred in Microsoft.VisualBasic.dll
Public member 'Variables' on type 'IDTSPackage90' not found.
can anyone help ?
View 11 Replies
View Related
Jul 24, 2007
I have created a custom data extension.
I am using this custom data extension from BI Studio.
Que1: I want to create report parameters from BI studio and capture them in my Data Extension.
Que2: Every report parameter has so many properties, like hidden, internal, default value etc, how do capture that information in my data extension, the parameters only give me name and value.
Que3: I know I can capture command Text. So My command can be Select * From tablename where fieldname= @myFieldname. Once I get this commandText in my data extension, How do extract parameters of the command?
Que4: If I have any custom attributes in my RDL file, Can I capture them in my Data Extension ?
Any help is appreciated...
View 1 Replies
View Related
Jan 16, 2007
Hi All,
Parameter passing in SSIS 2005 sometimes appears to be a cumbursome task. I have been digging into this topic for quite some time and here i note down some simple steps to demonstrate parameter passing at Package level.
(1) Create a SSIS project using Business Intelligence 2005 Or VS 2005.
(2) Create datasource (.ds) and Data Source View as required.
(3) A default SSIS Package by the name Package.dtsx is created. Double click this and you are shown tabs for Control Flow, Data Flow, Event Handlers, Package Explorer. On the Control Flow, drap and drop Execute SQL Task from Control Flow Items in the toolbar.
(4) Lets now create a variable at Package level. Right click anywhere in the control flow box (not on the Task created in Step 3 above). Click on the Variables on the context menu displayed. Variables window appears on the left of the screen. Click the Add Variable box in this window to create a variable. Name it var1 (or whatever you may like), Scope as Package, DataType as String and Value as MyValue. This is only the default value.
(5) Now let us edit the SQL Task created in Step 3. Double on it, on the General tab you can change its Name, Description. Set ResultSet as None. We shall proceed to execute a stored procedure by name MySPName and pass it a parameter. Set ConnectionType as OLE DB. Select the connection you creates in step 2. Set SQLSourceType as Direct input. SQLStatement as MySPName ? . Note the ? mark after the name of the stored procedure. This is important to accept the variable value (var1) created in Step 4.
(6) Select Parameter Mapping tab now. Click on Add button. Select the Variable Name as User::var1. This is the user created variable of Step 4. Select Direction as Input, DataType as Varchar and Parameter Name as @var1. Click on OK now.
(7) This sets up the basic of parameter passing. Compile the project to verify everything works. Right Click on the SQL Task and select Execute Task. This will execute the package taking default value of the variable. This can be used along with dtexec command with /set option to pass the parameter at command prompt.
View 5 Replies
View Related
Nov 29, 2010
I am attempting to pass report parameters to my query. My report's data source is a WCF web service. I can run normal queries fine, but I have found that without the know-how to pass parameters to my query I am limited with my capabilities.
Assume a string parameter named "Name" with a specified default value of "Jmachol90", how would I pass that into the following query at the designated place:
 Â
<Query>
      <Method Namespace="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" Name="SecurityPrincipalsGetRequest">
      <Parameters>
      <Parameter Name="Criteria" Type="XML">
<DefaultValue>
[code]....
View 17 Replies
View Related
Apr 16, 2015
I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
View 3 Replies
View Related
Sep 5, 2007
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
View 3 Replies
View Related
Nov 30, 2007
Hello
I have set up a report with a field in a list as a link to another report . I am passing all the parameters in correctly (4 parameters : 1 from a field value and 3 from parameter values). When I run the report and click the link, it jumps to the other report but one parameter is missing a value - the parameter I got from the field value. I really don´t know why this is happening as it was working fine until I added another parameter to the reports and suddenly it doesn´t work anymore.
Is there a limit on the number of parameters I can pass or something?
Please help!
View 5 Replies
View Related
Sep 6, 2015
I am passing a field value from main report to a parameter in a drill through sub report. But some field values contain 'special characters'. Those field values that contain special characters are not working for drill through. Javascript code to include special characters to pass to sub report parameter?
View 3 Replies
View Related
Sep 10, 2015
I'm facing to set report parameter  report parameter need to be date time so that calendar will be displayed but data set field is integer data type?Now report shows error message.
View 4 Replies
View Related
Sep 30, 2015
I am experiencing some issue with drill through report parameter not getting selected some times.I have two reports parent and child. Both reports have total ten parameters and all are cascading parameters with multiple selection. The report, when drill through to child, first eight parameters selected as it in the parent report.But the ninth parameter not get selected with the default value which from parent report and the parameter populated with values.
The first two parameter type is  date time and rest of them are text and all text type parameters available and default values are populated by query (Data set) only.
View 3 Replies
View Related
Jul 2, 2015
I'm building a report and I want to have a parameter that has multiple integer values (not text).I can get it to work just fine if I create a value for each and every numeric value, but I want the user to only see two choices in the dropdown menu (plus the "Select All" that gets automatically created when I tick the box for "Allow multiple values"). How can I make this work?
For example, for my TYPE parameter I'd like something like this:
Label: Tigers
Value: 2
Label: Lions Bears Oh My
Value: 1,3,4,5,6
But I can't seem to set a multiple Value for an integer. And I can't seem to wrap the value with quotes and use Text as the Data Type because it says an error occured during processing (I assume because the field I'm going against is of the Integer format).My query would look something like this (the real one is a lot more complex):
SELECT
v_R_System.Netbios_Name0
,v_GS_COMPUTER_SYSTEM_EXT.PCSystemType0
FROM
v_R_System
INNER JOIN v_GS_COMPUTER_SYSTEM_EXT
ON v_R_System.ResourceID = v_GS_COMPUTER_SYSTEM_EXT.ResourceID
WHERE
v_GS_COMPUTER_SYSTEM_EXT.PCSystemType0 IN (@TYPE)
I've tried different Expressions, filters, options, syntax, and what-not, but I think I'm missing something basic.
View 2 Replies
View Related
Aug 9, 2015
I have a report with two parameters (@StartDate and @EndDate) to enable users to specify values to customize the data in the report. These two parameters are created within the Dataset. The parameter visibility is set to visible.Opening the report directly works as expected (the user is able to input the date parameters as he wishes and then sees only the data of the specified time period, see image1).Now I want to use this report as a subreport (beeing opened from my main report): But when I open the report within the main report (via action go to report) the parameters are not shown anymore, see image2.Why are the parameters not shown anymore?
-- I'm working with Reporting Services in SharePoint mode using Sql Server 2012, SharePoint 2013.
View 4 Replies
View Related
