Easy: read a SQL table with 500 fields, transform, write to flat file using SSIS.
But, I have hundreds of transformations to define using Lookups and Aggregates, Derived Column transformations. I wan to group the data flow transformations in usable (reasonable size) groups (packages, containers, subroutines, whatever you want to call it).
I cannot figure out a simple easy way of doing this most "simple" obvious thing.
Am I the only one on the planet who needs to do this?
Good Afternoon, I have a package with reads data from a text file and persist that data in a table "X" on sql server. I have one dataflow wich does this operation. In the sequence, i have this dataflow connected to the next dataflow, wich read the data from the table "X" and do some joins with another tables and persist that new data on a table "Y". The first problem, the table "Y" have a foreign key to table "X" and i have to do this operation with transaction, the package give problem, it's something like "Cannot enlist this connection on distributed transaction...", but i have many packages, wich I exec with transaction and runs sucessfully. If i turn off the transaction, runs perfectly, when i put the transaction,it fails.
I've 6 data flow tasks in my package. I need to put all of these dataflows into a transaction and rollback if any one of the task fails. I dont want to use MSDTC.
Hi, I was wondering how it is posible to join three data sets from different data flows into one txt file. Let's explain a little more:
I have 3 dataflows. Each of them connect to sql server and and by a SQL command, they bring data into SSIS.
Each SQL command differ between them. So each data set have different columns (they dont have the same format). Also the amount of columns differ between each one.
What I need is to join the three data sets into one txt file. How can I do this? It is posible to join them with different data set formats into a txt file?
Is this the best way to join different data? It is better to use as many OLE DB Sources are needed instead of different data flows? Thanks for your help!
I have a data flow task which has around 5 data flows (like the 2nd diagram shown here). These 5 simple flows with just a row count transformation in between. Now, I want to fail the entire task immediately even if one of the data flows failed. Right now if one flow fails the remaining flows fails after a long time, not immediately. How can I make it fails immediately.
The other I would like to do is Can I place these 5 data flows in a transaction, so that if one data flow fails, others data flows also roll backs? ( I assume its not possible)
Perhaps one too many 2000 DTS packages have permanently damaged my ability to think clearly - however, I've find myself very frustrated attempting to create a SSIS Data Flow which replaces a very simple 2000 DTS package.
Take data from table1 in database1, put it in table2 in database2. Table2 in Database2 has an additional column as part of the primary key - so I need to add an arbitrary unique value in each row as it's inserted. Previously, I did this in the transformation script through a variable I incremented.
What's the recommend method to do this now - since row level processing of variables seem to be a no-no?
I have a package that has several data flows that run concurrently after some initial tasks and an initial data flow. I want transactions on each of the data flows and have set the transaction option to Required on the data flows (not on the package itself). I am also using checkpoint restart on the package. A couple things are happening.
1) the first data flow is successful and that releases the several that are waiting. Some of these complete OK but inevitably one or two will fail. The failing data flows will be different from run to run, sometimes one and sometimes two will fail. The error says:
Error: 0xC0202009 at Provider_NF_Code, Delete Provider_NF_Code [130]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
My hunch is that DTC is getting the transactions mixed up. I think it is committing one just after another data flow has already started work expecting the transaction to still be active. That would explain why the failing data flows are random. Plus, if I set the MaxConcurrentExecutables to 1 the entire package is successful. BUT, why have concurrent tasks if you can't run them concurrently.
2) when the package fails with the DTC problem I restart it with the checkpoint file. I was expecting the package to restart with the failed data flows. Instead, it restarts with the initial data flow (that all the other flows wait for in the package). This data flow has always been successful. It's as if the transactions I have put on the individual data flows are actually placed on a single virtual container that all of them are in, and when down stream data flows fail the entire data flow chain is rolled back and set to restart.
How can I get multiple concurrent data flows to run with transactions?
Why are successful data flows being restarted? Can I get just the failed tasks to restart?
We receive data files from different external customers, and these files have identical layouts.
I'm planning to set up a package for each customer. Each package will contain a flat file source -> OLEDB transformation dataflow, (followed by other customer-specific data flows).
What I'd like to do is just create this dataflow once, parameterising the flat file and table names. Is it possible to include this dataflow in each customer package so that if the flat file layout changes, I can just modify the connection managers in the one place, and then recompile each package to pick up the changes?
I'm stuck here when I try to open an existing package which contains several data flows, SSIS tries to validate each data flow and after a while a Visual Studio error message pops up and I can't do anything.
The error message says : "Unable to cast COM object of type 'System._ComObject' to interface type 'Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSObject90'. This operation failed because the QueryInterface call on Com component for the interface with IID '...GUID...' failed due to the following error : The application called an interface that was marshalled for a different thread. (Exception from HResult: RPC_E_WRONG_THREAD)"
So I have to make a fairly dynamic Data flow. I will get the most of the configuration from a database table. I will look up the name of the procedure to run as a source (I can use expressions or a script component source for this), I will lookup columns names from a database table.I can use expressions (maybe) or a destination script component for the destination including the destination table name and column names, these will be looked up in a database table.What I am not sure is how I will do the mapping. How can I make this dynamic? The logic for mapping will be in the database as well. Could I create a custom dataflow all in one script? A source, destination and mappings all in one script? Is there an example of this out there.my task ios to make the data flow completely dynamic.all config info would be kept in a SQL Server database.A complete custom script component dataflow task.
I have a package set up basically with two consecutive data flows. The first flow takes data from an OLE DB Source and stores it into a Flat File Destination. The second flow uses this same flat file as a source, alters the data, and stores the data in the same flat file, overwriting the old file. I set DelayValidation to True on the flat file. Still, here are the error messages I am receiving:
Error: 0xC020200E at DO, Flat File Destination [7676]: Cannot open the datafile "C:Temp.txt".
Error: 0xC004701A at DO, DTS.Pipeline: component "Flat File Destination" (7676) failed the pre-execute phase and returned error code 0xC020200E.
I am new to SSIS, so I'm sure I have a setting wrong or something. Is the problem that SSIS is trying to write to a file from which it is simultaneously reading data?
I have a package with 10 synchronous dataflows, which, combined, load about 300MB of flat file data to a database. This package would run successfully on 2 of our database servers, but would regularly fail on a third. The server on which it was failing is a 4 processor box with 16GB Ram with Windows Server 2003, SQL 2005, SSIS and SSRS installed - much more robust than one of the others that the package worked on. The SSIS error messages returned alternated between the following (with no apparent reason why one would show up rather than another, though the first was the most common):
"The file name "\Server1Folder1File1.txt" specified in the connection was not valid."
"The file name property is not valid. The file name is a device or contains invalid characters."
"An error occurred while initializing the flat file parser."
For the first error message, the error would report different connection managers and their associated file as invalid from run to run. All of the files across the 10 dataflows resided in the same network folder, and the package would read in and process a few of them before failing, so the problem was definitely not the connection string.
Searching the forums, etc. for these errors provided no useful information - given the real cause of the problem, these error messages are worse than unhelpful, they send you looking in the wrong direction. It was only when trying to track down another problem on the same server that I discovered the issue. When trying to copy database backups greater than 12GB over the network to this server, the operation would fail with an "Insufficient System Resources" message.
Some research led to the discovery that problem was caused by the /3GB switch in the boot.ini file of the server (don't let your Server team use that switch if you have 16GB of memory or more). Removing the switch and setting SQL to utilize AWE, fixed both the file copy problem AND the SSIS package failure problem. The SSIS package failed, not due to a bad connection string, but rather to insufficient server resources (read memory) to handle the simultaneous connections.
I hope this may help any others trying to track down this kind of SSIS package failure.
I will also provide here what I have gleaned about setting up Memory usage for SQL Server 2005 running on 32 bit Windows Server 2003 (with the caveat that I am no expert €“ corrections and additional information are welcome).
The following links got me started in my research (thanks to the folks who provided such useful information): http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=55191 http://articles.techrepublic.com.com/5100-10878_11-6091280.html http://www.simple-talk.com/community/blogs/brian_donahue/archive/2007/09/30/37747.aspx http://blogs.technet.com/askperf/archive/2007/03/23/memory-management-demystifying-3gb.aspx http://www.modhul.com/2007/11/10/optimising-system-memory-for-sql-server-part-i/
Also, search BOL for: Server Memory Options Enabling Memory Support for Over 4 GB of Physical Memory Enabling AWE Memory for SQL Server
Windows Server 2003 provides access to 4GB of virtual address space. By default, 2GB is assigned to the OS and 2GB to applications. This default can be change to 1GB for the OS and 3GB for applications by the use of the /3GB switch in the boot.ini file.
Physical memory over 4GB can be addressed by enabling Physical Addressing Extensions (PAE), which is done by setting the /PAE switch in the boot.ini file. This does not increase the systems virtual address space, rather it increases the size of the page table (which is maintained within the virtual address space), adding entries to reference the physical memory above 4GB.
It is important to note that these two switches are not interdependent (they do different things and you can turn each on or off regardless of the others status), though the combination of them has an impact on server performance and the maximum amount of physical memory which can be addressed.
The /3GB switch only impacts the allocation of the first 4GB of memory (virtual address space) between the OS and applications (default 50/50 % split, with switch on - 25% OS and 75% applications). The /PAE switch enables the system to reference/manage physical memory above 4GB, but does not alter the allocation percentages of the first 4GB of memory between the OS and applications. However, when PAE is enabled, the OS requires more memory within the first 4GB to manage the physical memory above 4GB (due to increased page table entries). With the /3GB switch, the OS has only 1GB of virtual address space, and only enough space to manage a total of 16GB of physical memory. If 32GB of physical memory is installed, 16GB of it will go to waste.
Address Windowing Extensions (AWE) is an API that allows an application to address more than the 2-3GB of memory that is available to applications within the virtual address space (first 4GB of memory). SQL Server can utilize AWE to take advantage of memory above the first 4GB that is made available via PAE, and can even reserve portions for its own use. I believe (though I can€™t remember where I got this bit) that SQL utilizes AWE memory only for the page cache (buffer pool €“ which seems to be a misnomer), and not for other operations.
To enable AWE, see the BOL references above.
The big question: what are the recommended settings for all of these? That all depends on what you have running on the server. You need to leave space for the OS, SQL Server and any other applications you have.
The hard and fast rules: If you have more than 4GB of RAM, you must use the /PAE switch in order to take advantage of it. If you have more than 16GB of RAM, you must NOT use the /3GB switch in order to take advantage of it.
Based on anecdotal evidence, I€™ve noticed the following generally recommended guidelines €“ assuming the server is dedicated to SQL.
Use of the /3GB switch seems to be a generally accepted practice if you have 8GB of RAM or less. For between 8 and 16GB, some say never use the /3GB switch, others say you can use it up to 12GB and still others up to 16GB. I interpret this to mean that it all depends on what types of loads are being placed on the server and that testing on individual servers will be required to determine whether or not to use the switch. Certainly that was my experience - the /3GB switch worked fine with 16GB RAM, until the server encountered a certain workload. For me, no more /3GB switch.
For setting SQL to use AWE, most seem to agree that it should be enabled if you have more than 4GB RAM. The setting of max server memory is more complicated. BOL seems to suggest (the €˜Server Memory Options€™ entry) a formula of Total Physical Memory minus 1-2GB for the operating system. Based on a desire to be a bit more conservative, I am now using the following formula:
max server memory = total physical memory
minus
4GB for the OS and application processes (since the AWE memory is utilized for page cache, not SQL processes)
minus
AWE memory required by other applications, including other instance of SQL Server
If anyone has additional insight, or a more refined equation, I could certainly benefit from it.
I am really new to DTS but I have had moderate success creating packages to move and tranform data in one DB to a new DB. The problem I am having is that I can not figure out how to use a constant in my transformation.
I am moving data from an old DB to a new DB. Currently all of my users in the old DB will have the same user role in the new DB. So I basically want to move all of my user ids to a lookup table and then give them all the same role id. Seems like it should be easy, but no luck here.
I have several instances of "magic number" variables (tinyints). In myprogram, I have assigned an enumeration to make the meaning clear, such as:enum Condition {Green = 0,Yellow,Red}In my database, one of the tables contains a "Condition" field (tinyint),which stores the number 0, 1 or 2. However, in my Stored Procedures I amhaving to use magic numbers as follows:SELECT * From Nodes Where Condition = 1(to select all nodes with yellow condition)Obviously, meaning is obfuscated here. I would rather use constants but nothave to re-define them in every stored procedure I use.I there any way to do this?
Then in any stored procedure that I have I would like to do something like:
CREATE PROCEDURE [dbp].[sp_AddNew] INCLUDE "macro_def.m" BEGIN insert into tablex (name,number) values ("text",_retcode(_INSERT)) END GO
Questions: What is the syntax in the SP to inlude a file like macro_def.m ? Where do I save the macro_def.m file ? Do I need to include a path in the INCLUDE statement ?
I can't figure out what is causing this error: can you please have a look at my code and let em know what is wrong or rework it for me:
="SELECT ARIBC.cntbtch, ARIBC.btchdesc, ARIBC.AUDTUSER, ARIBC.AUDTDATE, ARIBC.AUDTTI, GLPSOFTMAP.PSPRODUCT, GLPSOFTMAP.PSDEPT, GLPSOFTMAP.PSACCOUNT, GLPSOFTMAP.ACCTID, ARIBH.CODECURN, ARIBH.INVCDESC, CONVERT(varchar,ARIBH.FISCYR + ARIBH.FISCPER) as PERIOD, CONVERT(varchar,ARIBH.IDCUST) AS ACCOUNT, ARCUS.NAMECUST as ARNAME, CASE TEXTTRX WHEN 1 THEN 'INV' WHEN 2 THEN 'DM' WHEN 3 THEN 'CM' END AS CLASS, CONVERT(varchar,ARIBH.IDINVC) AS TRX_NUMBER, (CASE TEXTTRX WHEN 3 THEN ROUND((ARIBD.AMTEXTN*-1),2) ELSE ROUND((ARIBD.AMTEXTN),2) END) AS ""AMOUNT FROM ARIBC"" INNER JOIN ARIBH ON ARIBC.CNTBTCH = ARIBH.CNTBTCH INNER JOIN ARCUS ON ARIBH.IDCUST = ARCUS.IDCUST INNER JOIN ARIBD ON ARIBH.CNTBTCH = ARIBD.CNTBTCH AND ARIBH.CNTITEM = ARIBD.CNTITEM INNER JOIN GLAMF ON ARIBD.IDACCTREV = GLAMF.ACCTFMTTD INNER JOIN GLPSOFTMAP ON ARIBD.IDACCTREV = GLPSOFTMAP.ACCTID WHERE ARIBC.BTCHSTTS=3 AND ERRENTRY <= 0 AND BTCHDESC NOT LIKE '%54-8003%' AND ARIBH.IDINVC in ('" &Replace(Parameters!invoicenum.Value,",","','")"
I'm pulling data from one database in which the headerID is the primary key which automatically increases by one on each insert. Modifying all of the other fields from one data type to another and then inserting them into another database after the convertion is done. I keep getting this error.
The name 'HeaderID' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.
hi all, when I try to do the following insert for the table test
create table test (outputs character(10), chk integer)
insert into test values('a',((select count(*) from test where outputs='a')+1))
I am getting the error The name 'outputs' is illegal in this context. Only constants, constant expressions, or variables allowed here. Column names are illegal.
when i tried the same in DB2 it's working fine. is there anyerror in my syntax or this kind of function not allowed in SQL Server.
So I have three lookups in a row in my data flow. Basically they are doing data quality checks for me using a reference table.
I want to be able to take the error flows of the three lookups and merge them together (union all) so that I can insert the "errors" (or non matches) into a table.
Can't do it. Because SSIS deems non-matches as "errors" you automatically get the errorCode and errorColumn fields. When you try to union a lookup error output with another lookup's error output, you can't do it.
What I would like to see is a lookup act more like a conditional statment where you have three outputs of a lookup table: match found, no match found, and error. Either that, or I'd like to be able to edit the names of the errorCode and errorColumn fields.
Am I missing something here, or do I need to just add an OLE destination for each lookup error flow when I only want one? 'Course the problem then is that I want to count the number of rows that are in "error" across all of the lookups.
I'm using a script task to split my control flow before performing different data flow tasks depending upon the result of the script.
The dataflow tasks populate a single dataset with data before entering a foreach loop where the data in the dataset is consumed.
The foreach loop is valid for both dataflow tasks but I can€™t get it to accept multiple inputs.
I could have 2 copies of the foreach loop, one for each branch, but this seems wasteful and also means I have to maintain the same chunk of code in 2 places.
Can I join control flows or is there a better way to achieve this?
We're upgrading our SQL Server database from 2005 to 2012.I ran the Upgrade Advisory report and got this issue "Non-integer constants are not allowed in the ORDER BY clause in 90" because of the script below
SELECT gp.BRAND+' <> '+gp.CATEGORY AS 'full name', gp.PRODCODE, gp.CATEGORY FROM dbo.GFK_PRODUCT gp ORDER BY 'full name'
I tried running the same query in our test SQL Server 2012 and it ran successfully. Now I'm confuse if i still need to change it.I google the issue a bit and came across this link and mentioned this.
1.) Non-integer constants are ... constants that are not integer number.
Example:Â 'string1'Â represents a string constant 0x01Â represents a varbinary constant {ts '2015-02-26 06:00:00'}Â represents a datetime constant
1.23Â represents a numeric constants
2) So single quotes are used to define a string constants / character string constants but SQL Server allows also to use single quotation marks use also as column identifier delimiter: SELECT ... expression AS 'Column1' FROM ...
In this context is clear that 'Column1' is a column identifier but when used in ORDER BY : ORDER BY 'Column1' it generates confusion because SQL Server doesn't knows if it represents a string literal (character string constant) or it represents a column identifier / column name."Do I still need to change the existing code even though it's working fine in 2012? If yes, it is because of best practice reason or it will total get deprecated/not working in the future version?
I have a slight problem. I would like to pass some form of out of band data to every SP when called using ADO.NET.
A little more info is needed I think. I need to pass a unique identifier to ever SP my application calls and have that identifier available to use by the SP.
As my application has many many SP's in use I am trying to avoid adding an extra parameter to each and every one. I was really hoping for the ADO command object to have a property I could use to pass 'user defined' data to the database engine.
For example:
My SP's write to an audit trail table. The audit trail needs to record the user that executed the SP, this user might not be the same user that logged on to the database (depends on the connection string really). So, instead of adding an extra param to each SP, I want to access some data from the ADO command that was used to call the SP.
Can anyone help, or have I just confused everyone?
I want to have this query insert a bunch of XML but i get this error...
Msg 128, Level 15, State 1, Procedure InsertTimeCard, Line 117
The name "ExpenseRptID" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
Msg 128, Level 15, State 1, Procedure InsertTimeCard, Line 151
The name "DateWorked" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
What am i doing wrong...Can anyone help me out!! Thanks!!
p.s I know this query looks crazy...
Code Block
IF EXISTS (SELECT NAME FROM sysobjects WHERE NAME = 'InsertTimeCard' AND type = 'P' AND uid=(Select uid from sysusers where name=current_user)) BEGIN DROP PROCEDURE InsertTimeCard END go /********************************************************************************************************* ** PROC NAME : InsertTimeCardHoursWorked ** ** AUTHOR : Demetrius Powers ** ** TODO/ISSUES ** ------------------------------------------------------------------------------------ ** ** ** MODIFICATIONS ** ------------------------------------------------------------------------------------ ** Name Date Comment ** ------------------------------------------------------------------------------------ ** Powers 12/11/2007 -Initial Creation *********************************************************************************************************/ CREATE PROCEDURE InsertTimeCard @DateCreated DateTime, @EmployeeID int, @DateEntered DateTime, @SerializedXML text, @Result int output as declare @NewTimeCardID int select @NewTimeCardID = max(TimeCardID) from OPS_TimeCards -- proc settings SET NOCOUNT ON
-- local variables DECLARE @intDoc int DECLARE @bolOpen bit SET @bolOpen = 0 --Prepare the XML document to be loaded EXEC sp_xml_preparedocument @intDoc OUTPUT, @SerializedXML -- check for error IF @@ERROR <> 0 GOTO ErrorHandler --The document was prepared so set the boolean indicator so we know to close it if an error occurs. SET @bolOpen = 1
--Create temp variable to store values inthe XML document DECLARE @tempXMLTimeCardExpense TABLE ( TimeCardExpenseID int not null identity(1,1), TimeCardID int, ExpenseRptID int, ExpenseDate datetime, ProjectID int, ExpenseDescription nvarchar(510), ExpenseAmount money, ExpenseCodeID int, AttachedRct bit, SubmittoExpRep bit ) DECLARE @tempXMLTimeCardWorked TABLE ( TimeCardDetailID int not null identity(1,1), TimeCardID int, DateWorked DateTime, ProjectID int, WorkDescription nvarchar(510), BillableHours float, BillingRate money, WorkCodeID int, Location nvarchar(50) ) -- begin trans BEGIN TRANSACTION insert OPS_TimeCards(NewTimeCardID, DateCreated, EmployeeID, DateEntered, Paid) values (@NewTimeCardID, @DateCreated, @EmployeeID, @DateEntered, 0) -- check for error IF @@ERROR <> 0 GOTO ErrorHandler
--Now use @intDoc with XPATH style queries on the XML INSERT @tempXMLTimeCardExpense (TimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep) SELECT @NewTimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep FROM OPENXML(@intDoc, '/ArrayOfTimeCardExpense/TimeCardExpense', 2) WITH ( ExpenseRptID int 'ExpenseRptID', ExpenseDate datetime 'ExpenseDate', ProjectID int 'ProjectID', ExpenseDescription nvarchar(510) 'ExpenseDescription', ExpenseAmount money 'ExpenseAmount', ExpenseCodeID int 'ExpenseCodeID', AttachedRct bit 'AttachedRct', SubmittoExpRep bit 'SubmittoExpRep') -- check for error IF @@ERROR <> 0 GOTO ErrorHandler
-- remove XML doc from memory EXEC sp_xml_removedocument @intDoc SET @bolOpen = 0
-- commit transaction, and exit COMMIT TRANSACTION set @Result = @NewTimeCardID RETURN 0
-- Error Handler ErrorHandler: -- see if transaction is open IF @@TRANCOUNT > 0 BEGIN -- rollback tran ROLLBACK TRANSACTION END -- set failure values SET @Result = -1 RETURN -1
hello everybody, i hope u can help me with this... i want to pass the data entered in a web page to a stored procedure so as to store the data in a database... am using three layered architecture... how can i do this.... thanks in advance.............
Is there anyway to pass data from a sql database to a variable in a ssis package. I'm trying to get a few fields from a sql database into some variables in my package and send an email using these variables with the send mail task?
I've read the various posts and articles regarding this matter, but I seem to have problems getting to work:
In my control flow, I start by declaring a variable named "LastJobLedgerEntryID", to identify the records I need to add to the stage. From there I would like to use this variable in the source component in my dataflow, i.e.:
"SELECT [Entry No_],[Job No_],[Posting Date],[Document No_],[Type],[No_],[Description],[Quantity],[Direct Unit Cost],[Unit Cost],[Unit Price],[Chargeable],[Job Posting Group],[Global Dimension 1 Code],[Global Dimension 2 Code],[Work Type Code] FROM mytable WHERE [Entry No_] > " + @[User::LastJobLedgerEntryID]
But this fails? I should note that the variable LastJobLedgerEntryID is stored as a int32, and with the default value of 0
I have a stored proc that I am trying to use for sorting and paging below is a portion of it. When I hard code "Stan" into the Where clause I get all the records back that where posted by "Stan" but when I try to pass in "Stan" as a variable it tells me something about an invalid column name.
Here is the working version. When I hard code "Stan" into the Where Clause it works. I am using 2 single quotes on each side. See Where clause.
SET @sql ='SELECT [ThreadName],[PostID],[PostTypeID],[LanguageID],[PostAccessID],[UserID],[ThreadID],[PostParentID],[VoteSummaryID],
I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report?? Thanks in advance