Passing Data Between Multiple Data Flows
Nov 1, 2005OK, it's the first of the month...that must mean it's time for another dumb question!
View 10 Replies
ADVERTISEMENT
Passing Constants In Data Flows
Jan 13, 2006Hi
Does anyone know what would be the best technique to use for passing constants into data flows shapes?
For example if I had a lookup that required a static value to be passed into it as part of a concatenated key etc...
Cheers
Al
One Data Flow Task And Multiple Data Flows
Jul 26, 2007I have a data flow task which has around 5 data flows (like the 2nd diagram shown here). These 5 simple flows with just a row count transformation in between. Now, I want to fail the entire task immediately even if one of the data flows failed. Right now if one flow fails the remaining flows fails after a long time, not immediately. How can I make it fails immediately.
The other I would like to do is Can I place these 5 data flows in a transaction, so that if one data flow fails, others data flows also roll backs? ( I assume its not possible)
Thanks
Multiple Data Flows
May 3, 2007Easy: read a SQL table with 500 fields, transform, write to flat file using SSIS.
But, I have hundreds of transformations to define using Lookups and Aggregates, Derived Column transformations. I wan to group the data flow transformations in usable (reasonable size) groups (packages, containers, subroutines, whatever you want to call it).
I cannot figure out a simple easy way of doing this most "simple" obvious thing.
Am I the only one on the planet who needs to do this?
Thx.
Newbie.
Package Failure - Multiple Synchronous Data Flows - File Name Not Valid – /3GB /PAE
Apr 23, 2008I have a package with 10 synchronous dataflows, which, combined, load about 300MB of flat file data to a database. This package would run successfully on 2 of our database servers, but would regularly fail on a third. The server on which it was failing is a 4 processor box with 16GB Ram with Windows Server 2003, SQL 2005, SSIS and SSRS installed - much more robust than one of the others that the package worked on. The SSIS error messages returned alternated between the following (with no apparent reason why one would show up rather than another, though the first was the most common):
"The file name "\Server1Folder1File1.txt" specified in the connection was not valid."
"The file name property is not valid. The file name is a device or contains invalid characters."
"An error occurred while initializing the flat file parser."
For the first error message, the error would report different connection managers and their associated file as invalid from run to run. All of the files across the 10 dataflows resided in the same network folder, and the package would read in and process a few of them before failing, so the problem was definitely not the connection string.
Searching the forums, etc. for these errors provided no useful information - given the real cause of the problem, these error messages are worse than unhelpful, they send you looking in the wrong direction. It was only when trying to track down another problem on the same server that I discovered the issue. When trying to copy database backups greater than 12GB over the network to this server, the operation would fail with an "Insufficient System Resources" message.
Some research led to the discovery that problem was caused by the /3GB switch in the boot.ini file of the server (don't let your Server team use that switch if you have 16GB of memory or more). Removing the switch and setting SQL to utilize AWE, fixed both the file copy problem AND the SSIS package failure problem. The SSIS package failed, not due to a bad connection string, but rather to insufficient server resources (read memory) to handle the simultaneous connections.
I hope this may help any others trying to track down this kind of SSIS package failure.
I will also provide here what I have gleaned about setting up Memory usage for SQL Server 2005 running on 32 bit Windows Server 2003 (with the caveat that I am no expert €“ corrections and additional information are welcome).
The following links got me started in my research (thanks to the folks who provided such useful information):
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=55191
http://articles.techrepublic.com.com/5100-10878_11-6091280.html
http://www.simple-talk.com/community/blogs/brian_donahue/archive/2007/09/30/37747.aspx
http://blogs.technet.com/askperf/archive/2007/03/23/memory-management-demystifying-3gb.aspx
http://www.modhul.com/2007/11/10/optimising-system-memory-for-sql-server-part-i/
Also, search BOL for:
Server Memory Options
Enabling Memory Support for Over 4 GB of Physical Memory
Enabling AWE Memory for SQL Server
Windows Server 2003 provides access to 4GB of virtual address space. By default, 2GB is assigned to the OS and 2GB to applications. This default can be change to 1GB for the OS and 3GB for applications by the use of the /3GB switch in the boot.ini file.
Physical memory over 4GB can be addressed by enabling Physical Addressing Extensions (PAE), which is done by setting the /PAE switch in the boot.ini file. This does not increase the systems virtual address space, rather it increases the size of the page table (which is maintained within the virtual address space), adding entries to reference the physical memory above 4GB.
It is important to note that these two switches are not interdependent (they do different things and you can turn each on or off regardless of the others status), though the combination of them has an impact on server performance and the maximum amount of physical memory which can be addressed.
The /3GB switch only impacts the allocation of the first 4GB of memory (virtual address space) between the OS and applications (default 50/50 % split, with switch on - 25% OS and 75% applications). The /PAE switch enables the system to reference/manage physical memory above 4GB, but does not alter the allocation percentages of the first 4GB of memory between the OS and applications. However, when PAE is enabled, the OS requires more memory within the first 4GB to manage the physical memory above 4GB (due to increased page table entries). With the /3GB switch, the OS has only 1GB of virtual address space, and only enough space to manage a total of 16GB of physical memory. If 32GB of physical memory is installed, 16GB of it will go to waste.
Address Windowing Extensions (AWE) is an API that allows an application to address more than the 2-3GB of memory that is available to applications within the virtual address space (first 4GB of memory). SQL Server can utilize AWE to take advantage of memory above the first 4GB that is made available via PAE, and can even reserve portions for its own use. I believe (though I can€™t remember where I got this bit) that SQL utilizes AWE memory only for the page cache (buffer pool €“ which seems to be a misnomer), and not for other operations.
To enable AWE, see the BOL references above.
The big question: what are the recommended settings for all of these? That all depends on what you have running on the server. You need to leave space for the OS, SQL Server and any other applications you have.
The hard and fast rules:
If you have more than 4GB of RAM, you must use the /PAE switch in order to take advantage of it.
If you have more than 16GB of RAM, you must NOT use the /3GB switch in order to take advantage of it.
Based on anecdotal evidence, I€™ve noticed the following generally recommended guidelines €“ assuming the server is dedicated to SQL.
Use of the /3GB switch seems to be a generally accepted practice if you have 8GB of RAM or less. For between 8 and 16GB, some say never use the /3GB switch, others say you can use it up to 12GB and still others up to 16GB. I interpret this to mean that it all depends on what types of loads are being placed on the server and that testing on individual servers will be required to determine whether or not to use the switch. Certainly that was my experience - the /3GB switch worked fine with 16GB RAM, until the server encountered a certain workload. For me, no more /3GB switch.
For setting SQL to use AWE, most seem to agree that it should be enabled if you have more than 4GB RAM. The setting of max server memory is more complicated. BOL seems to suggest (the €˜Server Memory Options€™ entry) a formula of Total Physical Memory minus 1-2GB for the operating system. Based on a desire to be a bit more conservative, I am now using the following formula:
max server memory = total physical memory
minus
4GB for the OS and application processes (since the AWE memory is utilized for page cache, not SQL processes)
minus
AWE memory required by other applications, including other instance of SQL Server
If anyone has additional insight, or a more refined equation, I could certainly benefit from it.
Join Three Data Sets From Different Data Flows Into One Txt File
Mar 9, 2008Hi, I was wondering how it is posible to join three data sets from different data flows into one txt file.
Let's explain a little more:
I have 3 dataflows. Each of them connect to sql server and and by a SQL command, they bring data into SSIS.
Each SQL command differ between them. So each data set have different columns (they dont have the same format). Also the amount of columns differ between each one.
What I need is to join the three data sets into one txt file. How can I do this? It is posible to join them with different data set formats into a txt file?
Is this the best way to join different data? It is better to use as many OLE DB Sources are needed instead of different data flows?
Thanks for your help!
Transaction With Many Data Flows
Feb 29, 2008Good Afternoon,
I have a package with reads data from a text file and persist that data in a table "X" on sql server. I have one dataflow wich does this operation. In the sequence, i have this dataflow connected to the next dataflow, wich read the data from the table "X" and do some joins with another tables and persist that new data on a table "Y". The first problem, the table "Y" have a foreign key to table "X" and i have to do this operation with transaction, the package give problem, it's something like "Cannot enlist this connection on distributed transaction...", but i have many packages, wich I exec with transaction and runs sucessfully.
If i turn off the transaction, runs perfectly, when i put the transaction,it fails.
Sorry my english...
Thanks
Tie Up A Set Of Data Flows In A Transaction
Jan 2, 2008Hi,
I've 6 data flow tasks in my package. I need to put all of these dataflows into a transaction and rollback if any one of the task fails. I dont want to use MSDTC.
Can anyone help?
Thanks and Regards,
Subha
Data Flows And Unique Columns.
Feb 9, 2007Perhaps one too many 2000 DTS packages have permanently damaged my ability to think clearly - however, I've find myself very frustrated attempting to create a SSIS Data Flow which replaces a very simple 2000 DTS package.
Take data from table1 in database1, put it in table2 in database2. Table2 in Database2 has an additional column as part of the primary key - so I need to add an arbitrary unique value in each row as it's inserted. Previously, I did this in the transformation script through a variable I incremented.
What's the recommend method to do this now - since row level processing of variables seem to be a no-no?
DTC Error With Concurrent Data Flows
Feb 6, 2006I have a package that has several data flows that run concurrently after some initial tasks and an initial data flow. I want transactions on each of the data flows and have set the transaction option to Required on the data flows (not on the package itself). I am also using checkpoint restart on the package. A couple things are happening.
1) the first data flow is successful and that releases the several that are waiting. Some of these complete OK but inevitably one or two will fail. The failing data flows will be different from run to run, sometimes one and sometimes two will fail. The error says:
Error: 0xC0202009 at Provider_NF_Code, Delete Provider_NF_Code [130]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
My hunch is that DTC is getting the transactions mixed up. I think it is committing one just after another data flow has already started work expecting the transaction to still be active. That would explain why the failing data flows are random. Plus, if I set the MaxConcurrentExecutables to 1 the entire package is successful. BUT, why have concurrent tasks if you can't run them concurrently.
2) when the package fails with the DTC problem I restart it with the checkpoint file. I was expecting the package to restart with the failed data flows. Instead, it restarts with the initial data flow (that all the other flows wait for in the package). This data flow has always been successful. It's as if the transactions I have put on the individual data flows are actually placed on a single virtual container that all of them are in, and when down stream data flows fail the entire data flow chain is rolled back and set to restart.
How can I get multiple concurrent data flows to run with transactions?
Why are successful data flows being restarted? Can I get just the failed tasks to restart?
-Gordy
Sharing Data Flows Between Projects
Nov 29, 2007We receive data files from different external customers, and these files have identical layouts.
I'm planning to set up a package for each customer. Each package will contain a flat file source -> OLEDB transformation dataflow, (followed by other customer-specific data flows).
What I'd like to do is just create this dataflow once, parameterising the flat file and table names. Is it possible to include this dataflow in each customer package so that if the flat file layout changes, I can just modify the connection managers in the one place, and then recompile each package to pick up the changes?
Any advice appreciated.
SSIS Crashes While Validating Data Flows
Jun 26, 2006Hi all,
I'm stuck here when I try to open an existing package which contains several data flows, SSIS tries to validate each data flow and after a while a Visual Studio error message pops up and I can't do anything.
The error message says : "Unable to cast COM object of type 'System._ComObject' to interface type 'Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSObject90'. This operation failed because the QueryInterface call on Com component for the interface with IID '...GUID...' failed due to the following error : The application called an interface that was marshalled for a different thread. (Exception from HResult: RPC_E_WRONG_THREAD)"
Did anyone has seen this error message ?
Any help will be appreciated.
Sébastien
Integration Services :: Custom Data Flows
Nov 20, 2015So I have to make a fairly dynamic Data flow. I will get the most of the configuration from a database table. I will look up the name of the procedure to run as a source (I can use expressions or a script component source for this), I will lookup columns names from a database table.I can use expressions (maybe) or a destination script component for the destination including the destination table name and column names, these will be looked up in a database table.What I am not sure is how I will do the mapping. How can I make this dynamic? The logic for mapping will be in the database as well. Could I create a custom dataflow all in one script? A source, destination and mappings all in one script? Is there an example of this out there.my task ios to make the data flow completely dynamic.all config info would be kept in a SQL Server database.A complete custom script component dataflow task.
View 3 Replies View RelatedPossible Validation Problem With Flat File Between Two Data Flows In A Package
Apr 17, 2007I have a package set up basically with two consecutive data flows. The first flow takes data from an OLE DB Source and stores it into a Flat File Destination. The second flow uses this same flat file as a source, alters the data, and stores the data in the same flat file, overwriting the old file. I set DelayValidation to True on the flat file. Still, here are the error messages I am receiving:
Error: 0xC020200E at DO, Flat File Destination [7676]: Cannot open the datafile "C:Temp.txt".
Error: 0xC004701A at DO, DTS.Pipeline: component "Flat File Destination" (7676) failed the pre-execute phase and returned error code 0xC020200E.
I am new to SSIS, so I'm sure I have a setting wrong or something. Is the problem that SSIS is trying to write to a file from which it is simultaneously reading data?
Thank you.
Physical Setup: 1 Data File Vs Multiple Smaller Data Files
Jul 20, 2005Hello all. Before my arrival at my current employer, our consultantsphysically set up our MSSQL 7 server as follows:drive c: contains the mssql enginedrive d: contains the transaction logdrive e: contains the data filesNo filegroups were set up and the data files consist of only 1 largephysical file. Currently, our data file is >10GB. When I was trained onthe physical aspects of sqlserver, I was told to never create physical files[color=blue]> 2048MB each. If I did, I could expect inefficient physical storage of[/color]data and slower performance (due to the OS).Our server has 2 RAID-5 arrays. Drive c: and e: are located on the firstarray and drive d: on the second. We're running Windows 4.0 NT Server SP6with NTFS.Can someone comment on the use of 1 single large data file vs. more smallerdata files?
View 2 Replies View RelatedReporting Services :: Keep Multiple Data Tables Having Fixed Size Data In Same Page On Runtime?
Jul 31, 2015I have a report where in I have a combination of matrix ,table data regions.
The problem what I am facing is that the data tables don't remain fixed in their position and they tend to move down.
E.g. table 1 and table 2Â are on the same page in design time side by side (right and left)however during the runtime the table1 is pushed down and table2 is at its position .
Now how can I keep them all fixed in their same position. Most of the tables have fixed size rows and some who have high size of rows have been put at the end . What settings we can set?
Selecting A Single Data Source From Multiple Data Sources
Aug 4, 2006Hi,
I am pretty new to SSIS. I am trying to create a package which can accept data in any of several formats. i.e. CSV, Excel, a SQL Server database/table and import the data into my destination database.
So far i've managed to get this working OK. However I am now TOTALLY stuck. I'm currently trying to just concentrate on the data sources being a CSV (using a Flat File Data Source) and/or an Excel Spreadsheet.
I can get the data in and to my destination using a UNION ALL component and mapping the data sources to it so long as both the CSV file and the Excel spreadsheet exist.
My problem is that I need my package to handle the possibility that only the CSV file might exist and there is no Excel spreadsheet. In which case i'd like the package to ignore the Excel datasource completely. Currently either of my data sources do not exist I get errors and the package terminates.
Is there any way in SSIS that I can check all my data sources to see which ones exist (i.e. are valid). If they exist I want to use them. If it doesn't exist i'd like to disgard it (without error - as long as there is a single datasource the package should run)
I've tried using the AcquireConnection method in a script task on each of my connections, hoping that it would error if the file/datasource did not exist. It doesn't though (in the case of an Excel datasource it just creates a empty excel file for me).
The only other option I can come up with are to have seperate packages depending on the type of data we want to import and then run a particular package depending on the format of the source data. This seems a bit long winded. I am pretty sure I must be able to do what I want to achieve but I can't work out how.
I'll be grateful to anyone who can send me any tips/hints/links on how I can achieve this.
Many thanks
Rob Gibson
Data Flow: Converting Data In Multiple Columns
Sep 28, 2006Hi,
I'm just wondering what's the best approach in Data Flow to convert the following input file format:
Date, Code1, Value1, Code2, Value2
1-Jan-2006, abc1, 20.00, xyz3, 35.00
2-Jan-2006, abc1, 30.00, xyz5, 6.30
into the following output format (to be loaded into a SQL DB):
Date, Code, Value
1-Jan-2006, abc1, 20.00
1-Jan-2006, xyz3, 35.00
2-Jan-2006, abc1, 30.00
2-Jan-2006, xyz5, 6.30
I'm quite new to SSIS, so, I would appreciate detailed steps if possible. Thanks.
Single Report With The Data From Multiple Data Sources
Jan 9, 2007Hi,
In my project i want a report. In that report data is getting from more than one data sources(systems). While creating data source view i used named query for both primary and secondary data source. But at the time of crating "Report Model" i am getting below error.
An error occurred while executing a command.
Message: Invalid object name 'Table2'.
Command:
SELECT COUNT(*) FROM (SELECT SerialNum, ModelNum AS com_model
FROM Table2) t
Is there any way to create a report with multiple data sources?
Passing The Same Data To Every SP
Jan 17, 2008
Hi,
I have a slight problem. I would like to pass some form of out of band data to every SP when called using ADO.NET.
A little more info is needed I think. I need to pass a unique identifier to ever SP my application calls and have that identifier available to use by the SP.
As my application has many many SP's in use I am trying to avoid adding an extra parameter to each and every one. I was really hoping for the ADO command object to have a property I could use to pass 'user defined' data to the database engine.
For example:
My SP's write to an audit trail table. The audit trail needs to record the user that executed the SP, this user might not be the same user that logged on to the database (depends on the connection string really). So, instead of adding an extra param to each SP, I want to access some data from the ADO command that was used to call the SP.
Can anyone help, or have I just confused everyone?
Graham
Passing Data To SQL Database
Apr 8, 2007hello everybody, i hope u can help me with this... i want to pass the data entered in a web page to a stored procedure so as to store the data in a database... am using three layered architecture... how can i do this.... thanks in advance.............
View 1 Replies View RelatedSub Report Passing Data Up
Feb 25, 2008Hi
Can anyone help with this. Is it possible to pass data from a sub-report to the main report. I know this was possible in Crystal.
I currently have VS2005 but may be able to justify a move to 2008 if it can do it.
Thanks
Passing Data From Db To Ssis Variable
Jul 11, 2007Is there anyway to pass data from a sql database to a variable in a ssis package. I'm trying to get a few fields from a sql database into some variables in my package and send an email using these variables with the send mail task?
Thanks,
Passing Variables To Data Flow Component
Apr 27, 2006Hi,
I've read the various posts and articles regarding this matter, but I seem to have problems getting to work:
In my control flow, I start by declaring a variable named "LastJobLedgerEntryID", to identify the records I need to add to the stage. From there I would like to use this variable in the source component in my dataflow, i.e.:
"SELECT [Entry No_],[Job No_],[Posting Date],[Document No_],[Type],[No_],[Description],[Quantity],[Direct Unit Cost],[Unit Cost],[Unit Price],[Chargeable],[Job Posting Group],[Global Dimension 1 Code],[Global Dimension 2 Code],[Work Type Code] FROM mytable WHERE [Entry No_] > " + @[User::LastJobLedgerEntryID]
But this fails? I should note that the variable LastJobLedgerEntryID is stored as a int32, and with the default value of 0
Could someone please help me with this?
Thanks in advance!
Where Clause Problem When Passing In Data Dynamicly - HELP!
Apr 9, 2008I have a stored proc that I am trying to use for sorting and paging below is a portion of it. When I hard code "Stan" into the Where clause I get all the records back that where posted by "Stan" but when I try to pass in "Stan" as a variable it tells me something about an invalid column name.
Here is the working version. When I hard code "Stan" into the Where Clause it works. I am using 2 single quotes on each side. See Where clause.
SET @sql ='SELECT [ThreadName],[PostID],[PostTypeID],[LanguageID],[PostAccessID],[UserID],[ThreadID],[PostParentID],[VoteSummaryID],
[Subject],[Body],[PostAuthor],[PostDate],[IsApproved],[TotalViews],[FormattedBody],[IPAddress],[PostCount],[ArticleCount],
[TrackbackCount],[IsSticky],[StickyDate]
FROM
(SELECT t.[ThreadName], p.[PostID],p.[PostTypeID],p.[LanguageID],p.[PostAccessID],p.[UserID],p.[ThreadID],p.[PostParentID],p.[VoteSummaryID],
p.[Subject],p.[Body],p.[PostAuthor],p.[PostDate],p.[IsApproved],p.[TotalViews],p.[FormattedBody],p.[IPAddress],p.[PostCount],p.[ArticleCount],
p.[TrackbackCount],p.[IsSticky],p.[StickyDate],ROW_NUMBER() OVER(ORDER BY ' + @sortExpression + ') as RowNum
FROM syl_Posts p
INNER JOIN syl_Threads t ON t.[ThreadID] = p.[ThreadID]
WHERE t.[PostAuthor] = ''Stan'')
AS syl_TPInfo
WHERE RowNum BETWEEN ' + CONVERT(nvarchar(10), @startRowIndex) +
' AND (' + CONVERT(nvarchar(10), @startRowIndex) + ' + '
+ CONVERT(nvarchar(10), @maximumRows) + ') - 1'
Not working when I try to pass in a variable into the Where clause.
SET @sql ='SELECT [ThreadName],[PostID],[PostTypeID],[LanguageID],[PostAccessID],[UserID],[ThreadID],[PostParentID],[VoteSummaryID],
[Subject],[Body],[PostAuthor],[PostDate],[IsApproved],[TotalViews],[FormattedBody],[IPAddress],[PostCount],[ArticleCount],
[TrackbackCount],[IsSticky],[StickyDate]
FROM
(SELECT t.[ThreadName], p.[PostID],p.[PostTypeID],p.[LanguageID],p.[PostAccessID],p.[UserID],p.[ThreadID],p.[PostParentID],p.[VoteSummaryID],
p.[Subject],p.[Body],p.[PostAuthor],p.[PostDate],p.[IsApproved],p.[TotalViews],p.[FormattedBody],p.[IPAddress],p.[PostCount],p.[ArticleCount],
p.[TrackbackCount],p.[IsSticky],p.[StickyDate],ROW_NUMBER() OVER(ORDER BY ' + @sortExpression + ') as RowNum
FROM syl_Posts p
INNER JOIN syl_Threads t ON t.[ThreadID] = p.[ThreadID]
WHERE t.[PostAuthor] = ' + @PostAuthor + ')
AS syl_TPInfo
WHERE RowNum BETWEEN ' + CONVERT(nvarchar(10), @startRowIndex) +
' AND (' + CONVERT(nvarchar(10), @startRowIndex) + ' + '
+ CONVERT(nvarchar(10), @maximumRows) + ') - 1'
Need Help On How To Passing Variable Inside A Data Flow
Jun 19, 2006
All,
Is it possible to passing variable at row level within a data flow? If so, what transformation should use?
Thanks
Passing Data From Subreport To Main Report
Sep 21, 2007I need to convert a Crystal report that contains three subreports. Each of these subreports uses a different stored procedure to obtain data. The main report uses data from these subreports to calculate averages in the footer etc.
How do i get the data contained in these subreports so i can use it in my main report??
Thanks in advance
Passing Variables To Data Reader Source
May 22, 2007I am running a sql task which will pass table as object variable to the result set
I have a for each loop container which is used to loop for all the servers. I use two of the parameters to establish connection string in the for each loop task from the reasult set variables.
Now my next step is a data flow task (Data Reader Source) where i have to run a query but the table name and column names are dynamic and i dont see an option to call variables.
can someone tell me if this is possible (var1,var2,... are variables in the package scope)
select var1, var2 from var3.var4
where var5 = 'y'
T-SQL (SS2K8) :: Selecting Data From Table With Multiple Conditions On Multiple Columns
Apr 15, 2014I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
How To Merge Multiple Rows One Column Data Into A Single Row With Multiple Columns
Mar 3, 2008
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
Integration Services :: Import Data From Multiple Excel Sheets To Multiple Tables Using SSIS?
Aug 25, 2015I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.Â
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
Data Type Of Parameter Passing To A Stored Procedure
Feb 25, 2004Hi,
I pass a paramter of text data type in sql server (which crosspnds Memo data type n Access) to a stored procedure but the problem is that I do not know the crossponding DataTypeEnum to Text data type in SQL Server.
The exact error message that occurs is:
ADODB.Parameters (0x800A0E7C)
Parameter object is improperly defined. Inconsistent or incomplete information was provided.
The error occurs in the following code line:
.parameters.Append cmd.CreateParameter ("@EMedical", advarwchar, adParamInput)
I need to know what to write instead of advarwchar?
Thanks in advance
Passing Multi-Value Parameters To A Data Driven Subscription
Apr 24, 2007Hi,
I've been asked to set up a data driven subscription for a number of reports which use multi value parameters. For example, show me all transactions against the following departments: IT, Building Services, Accounts.
As an interactive report it's simple, the user just selects the relevant departments, but as a data driven subscription I can't seem to find the correct format to pass the selections through.
Has anyone tried this before?
Thanks,
Dan