Passing List Values In Drill Through! URGENT
Aug 13, 2007
I have a custom list(say a list for account numbers, account numbers starting with 13 form a group, then starting with 14 form a group and like that)
and then there are tables inside this list. the report will be displayed based on the values of this custom list.
i also have a drill through report for this. now when i pass fields!accountnumber.uniquename for this list only the first of the group values say 130001 is selected..
what shud i do to select the whole grp??
thanks!
View 4 Replies
ADVERTISEMENT
Mar 24, 2008
Hi all;
Could any body tell me as to how I would be able to pass report grouping in drill through report.
Please review the diagram below to better understand my problem
Report 1 (Summary) Columns1 Column 2
Row-1:Grouped by attribute X Calculation based of dates Calculation based of dates
Row-2: Grouped by attribute Y Calculation based of dates Calculation based of dates
The Drill thru option should be present in all of the columns; so that, when any of the numbers in the column are clicked it should drill through to another report which should show all the records pertaining to all the values in X1
Report 2 (Details) Report 3 ((Details)
X1 Y1
X2 Y2
X3 -
X4 -
X5 -
- Yn
-
-
-
Xn
What I did so far was to pass the report parmeter in report 1 as "Fields! attribute X ,Value" and same for Y
The problem with is that only the first value of the group that satisfies condition gets passed on to the detail reports. Kindly let me know were I am going wrong and what should I be doing.
Awaiting your opinions
Thanks and Regards
GM
View 4 Replies
View Related
Jul 13, 2007
All,
I have two reports in my project. One is summary and the other is drill through. In Summary report I have StartDate and EndDate Parameters which are DateTime type. Language settings on my workstation are set to Canadian English, and so are in the IE. When I deploy the reports to the Sharepoint WebParts based reporting portal, the reports run fine individually. However, when I try to drill through from summary report to the detail report, the following error is displayed, where the StartDate is 13/07/2007 (Canadian format dd/MM/yyyy):
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
Why do the reports run fine individually? Obviously something is wrong with Report Server processing the parameters, that it converts the date format to US English only when passing parameters to drill through report. This problem is eliminated when I change the language settings to US-English on my workstation.
Any ideas how can this be fixed, if at all? It would certainly be not feasible to have all the users change their settings from Canadian to US-English.
Thanks.
View 6 Replies
View Related
Sep 6, 2015
I have two reports 'Product Details' and 'Sales by Product'
When i click on 'Product ID' field in 'Product Details' report, It has to drill through to 'Sales by Product' which has a parameter 'Product ID' in it.Â
I have written the following javascript
="javascript:void(window.open('http://servername/Rportserver/Pages/Report.aspx?ItemPath=%2fTestDrillThru%2fSales+By+Product&rs:Command=Render&ChildProductID="& Fields!ProductID.Value &"','_blank',',resizable=1,width=1600,height=800,left=50'))"
When i drill through, field value is not passing to 'child product id' in sales by product. I have to give the value again in child report.
View 5 Replies
View Related
Jul 4, 2007
All,
I have two reports. One is the main/summary report and other one is drill through. When I pass the Start and End Date parameters from main to the drill, the original format of DateTime changes. For example, in main report the data is displayed for following date range:
4/7/2007 - 5/9/2007 (i.e 4 July 2007 to 5 Sept 2007)
which displays correct data.
However, when I click on the drill through link, it jumps to the drill through report but displays data for the following period:
7/4/2007 - 9/5/2007 (i.e. 7 Apr 2007 to 9 May 2007)
The reporting services is converting the value from one format to another of the report parameters when passing them from parent report to the drill through. When run individually, these two reports display data for correct date range. And you can imagine, the child report crashes with rsReportParameterTypeMismatch error if the start or end date had a day part greater than 12 (e.g 25/4/2007).
I can't understand what could be going wrong. All the parameters in both reports are datetime, so intrisically, it shouldn't matter even if the reporting services is converting or using different date formats as long as the data type remains the same. Is there a way to fix this and force the parameters to stay in the format they are provided in the main report?
Your help is much appreciated.
Thanks.
View 5 Replies
View Related
Nov 10, 2015
I have two reports.
1. Main Report
2. Sub Report.
I have cascading parameters in 'Main Report'. When i try to pass cascading parameters in to sub-report, I could pass only 'first parameter' value to sub-report.Is there a way that i can pass cascading parameters to the child report?
View 4 Replies
View Related
Sep 6, 2015
I am passing a field value from main report to a parameter in a drill through sub report. But some field values contain 'special characters'. Those field values that contain special characters are not working for drill through. Javascript code to include special characters to pass to sub report parameter?
View 3 Replies
View Related
Jun 15, 2015
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
So the output would look like :
CASE_ID VARIABLE
=====================
1 [ABC],[HDR],[GHHHHH]
2 [ABCSS],[CCHDR],[XXGHHVVVHHH],[KKKJU],[KLK]
SELECT
preop.Case_ID,
dbo.Concatenate( '[' + CAST(preop.value_text AS VARCHAR) + ']' ) as variable
FROM
dbo.TBL_Preop preop
WHERE
preop.Deleted_CD = 0
GROUP BY
preop.Case_ID
View 8 Replies
View Related
Sep 16, 2015
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level**  and        **Salesamount**. Â
Values are like Â
**[-]category** Â Â Â Â Â Â Â **100**
  **[-]subcat**       **50**
     **product**      **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
View 3 Replies
View Related
Apr 15, 2007
I want to select rows that have an integer value IN a parameter list value
I want to pass an integer list to my tableadapter's select
as in Select * from sometable
Where myIntValue IN (@intParamList )
I cannot figure out how to get my list into @intParamList
It works fine as a single value - eg 3, but how do I set it to 1,2,3 ?
Thanks
Bill
View 2 Replies
View Related
Feb 12, 2001
Hello, I'd greatly appreciated if someone can help me out on this problem:
I'd like to pass a string (which is a multiple value in this case - "Smith", "Lee", "Jones", "Hanson") as an input parameter to a stored procedure. I'd like to use this string as part of the select statement:
exec sp_GetLN "smith, lee, jones, hanson"
In the stored procedure:
@strLN varchar <- "smith, lee, jones, hanson"
/*What do I need to do here to SET/REPLACE the original string so that the syntax can be accepted by the select statement??*/
SELECT * from tblCustomers
WHERE LASTNAME IN (@strLN)
It looks simple but I've been trying to get the syntax to work. What can I do to change the quote from ' to "?? Can I use char(34) like VB??
Your help is greatly appreciated~
Thank you
View 2 Replies
View Related
Oct 14, 2015
I am trying to audit data quality based on some defined data quality rules. The rules are stored in tables and processed using stored procedures. I am facing a problem while generating audits. Let's say I am trying to audit data in OrderDetail table. The table design is mentioned below...I inserted some sample data into the table using RedGate data generator.The audit table output I am expecting is as mentioned in the screenshot below
Its the PrimaryKeyAttributeValues column I am facing problems with. I am using STUFF function within a dynamic SQL query to get the primary key's as a list of comma separated values.
View 2 Replies
View Related
Jul 20, 2005
I want to do something like this in a stored proc:------Create Procedure dbo.GetPatients@PatientIdList varchar(200) -- comma separated list of PatientIDsAsSelect *From PatientsWhere PatientId In (@PatientIdList)------I know the above won't work, but of course what I want is if@PatientIdList = '1,2,3' then I want Patient records with PatientIds1, 2, and 3 returned.It looks like the only way to do this is to build the SQL statement asa string within the stored procedure ... which pretty much defeats theusefulness of using precompiled sprocs as I understand it (better offbuilding a dynamic query against a View in that case).Thoughts?Joel Thornton ~ <groups@joelpt.eml.cc>
View 1 Replies
View Related
Jul 21, 2000
I'm trying to execute this statement but due to some missing paremters its creating table in that fashion
Table created = '+@string+'_'+@string1+'
but I want table to be create as what parameters passed, can you have a look pls...
exec sp_test 'master','table'
Starts here-----------
if exists (select * from sysobjects where id
= object_id(N'[dbo].['+@string+'_'+@string1+'])
and OBJECTPROPERTY(id, N'IsUserTable') = 1)
Drop table [dbo].['+@tblName+'_'+@table1+']
CREATE TABLE [dbo].['+@string+'_'+@string1+']
(
[HESClrId] [nvarchar] (20) NULL ,
[HESClrName] [nvarchar] (60) NULL ,
[HESClrSeq] [smallint] NULL
)
ON [PRIMARY]
View 1 Replies
View Related
Dec 10, 2007
Hi i have been working on these stored procedures for what seems like ages now and i just cant understand why they dont work. I have followed many tutorials and think i have the correct synat but i jus keep getting errors.
Basically, i have SPOne and SPTwo - SPOne is writing to a table called Publication that has PublicationID as its PK (auto generated). SPtwo needs to get this PublicationID from SPOne and use it to insert rows into a second table PublicationAuthors - the PublicationID is hence a FK in the table PublicationAuthors.
The error i get is: Procedure or function 'SPOne' expects parameter '@publicationID', which was not supplied. Cannot insert the value NULL into column 'publicationID', table .dbo.PublicationAuthors'; column does not allow nulls. INSERT fails.
SPOne is as follows: ALTER PROCEDURE dbo.StoredProcedureOne @typeID smallint=null, @title nvarchar(MAX)=null, @publicationID smallint OUTPUTASBEGIN SET NOCOUNT ON INSERT INTO Publication (typeID, title) VALUES (@typeID, @title) SELECT @publicationID = scope_identity()
END
and SPtwo is as follows: ASDECLARE @NewpublicationID IntEXEC StoredProcedureOne @NewpublicationID = OUTPUTSET @publicationID = @NewpublicationIDINSERT INTO PublicationAuthors (publicationID, authorID) VALUES (@publicationID, @authorID)
SELECT @NewpublicationID
Thanks
Gemma
View 8 Replies
View Related
Aug 16, 2007
Hi, I m using sql 2005 as a back end in my application...
I am useing Store procedure..for my data in grid..
ALTER PROCEDURE [dbo].[ProductZoneSearct]
(
@Productid char(8),@Proname char(8),@radius int,@mode varchar(5) = 'M',@Zone nvarchar(1000),)
ASSET NOCOUNT ON;Create Table #Product (ProductID int, TimeEntered datetime, DateAvailable datetime, Productname varchar(80), City varchar(50), State char(4),Miles decimal, Payment varchar(40),UserID int, Phone varchar(15))
Insert #Product Select ProductID , TimeEntered, DateAvailable, Productname ,City,State,miles,Payment ,Miles, UserID, Daily, PhoneFrom [tblproduct] Where city IN (@Zone)
Select ProductID TimeEntered, DateAvailable, Productname City,State,miles,Payment ,Miles, U.Phone As phoneNumber, Company, , L.Phone As cmpPhone From #Product As L Left Join (Select UserID, Company, Phone, From [User]) As U On U.UserID = L.UserID Order By DateAvailable
if i pass value in "where city in (@Zone)" and @Zone ='CA','AD','MH' then it can not get any result..but if write where city in ('CA','AD','MH') then it give me perfact result..
I tried to below syntax also but in no any user Where city IN ('+@Zone+')
In short if i pass value through varibale (@Zone) then i cant get result...but if i put direct value in query then only getting result..can anybody tell me what is problem ?
Please Hel[p me !!!
Thank you !!!
View 5 Replies
View Related
Jan 12, 2004
hi all,
I have a view (query) created in ms acess. how can i pass a parameter from vb to the query at runtime? can i do it?
View 7 Replies
View Related
Nov 15, 2007
I am extracting data from multiple schemas with same structure. I have a table which have all the schema listed.Using Execute Sql task and For each loop, I am reading that table and string the value in a variable.
It is like this
"Select TK_ID,TK_TOKEN from " + @[User::Column1] + ".Tokens"
Column 1 is schema name.
Now I create a DATA FLOW TASK which has a OLEDB Source and OLEDB destination.
Using the option " Sql Command from variable" when I select the variable.
Since the Column1 will be evaluated at runtime , it doesnt give me any output columns to map to OLEDB destiantion and this throwing error.
OLEDB source output contains no output columns, The layout Validation failed.
Please help asap, my project is stuck.
View 9 Replies
View Related
Aug 1, 2007
Hi..
I m working on MS SQL Server 2000.
I am trying to pass a list of numbers to a stored procedure to be used with 'IN()' statement.
I was doing something like..
Create Procedure proc
(
@Items varchar(100) --- List of numbers
)
AS Begin
Declare @SQL varchar(8000)
Set @SQL =
'
Select Query......
Where products IN (' + @items + ') '
'
Exec (@SQL)
This stored procedure is working fine, but when i m adding more required stuff to that, the size exceeds 8000, & it gives the error "Invalid operator for data type. Operator equals add, type equals text."
Can any1 please help me out with this ASAP??
View 4 Replies
View Related
Sep 7, 2015
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red  - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red  - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
          red   blue  green
  pen       2    0    1
  marker    0    1    0
  pencil      1    3    0
  highlighter  1    1    1Â
We tried Sum but not able to display in single row.
View 2 Replies
View Related
Mar 22, 2007
I accidently deleted the file that I was working on in notepad that had the tables and views that I created. Is there a way to retrieve a list and the code that I put in for the tables and views?
View 1 Replies
View Related
Jun 12, 2008
Hi all,
I have a store procedure which updates one row of a table. I need to use a trigger, so that it will also update another row in the same table. Like Debit and Credit. Somehow I am not able to pass variables from SP to trigger. Below are my SP and Trigger codes.
STORE PROCEDURE ALTER PROCEDURE dbo.Transfer
(@online varchar(50),
@amount smallmoney,@toaccount varchar(10)
)
AS
Begindeclare @total smallmoney declare @total1 smallmoney
set @total1=1
select @total=TotalAmount from Customers where OnlineID=@online
if @total>=@amount
set @total=dbo.Calulator(@total,@amount)
else
set @total1=0
End
update Customers set TotalAmount=@total where OnlineID=@online
RETURN @total1
TRIGGER ALTER TRIGGER dbo.Updcust ON Customers
FOR update
AS
BEGINdeclare @total2 smallmoney
declare @total3 smallmoneydeclare @amount smallmoney
declare @toaccount varchar(10)
select @total2=TotalAmount from Customers where AccountNumber=8776450012
set @total3=@total2+@amount
UPDATE Customers set TotalAmount=@total3 where AccountNumber=8776450012
END
please help
View 4 Replies
View Related
Feb 17, 2005
Hi...
I'm creating a procedure to fetch rows from table. One field will come come as IN(). Its the condition. That field is numeric field (note down), i would like to pass the In values as parameter.
eg: procedurename @fieldvalue varchar(100)
as
begin
...
WHERE fieldname IN(@fieldvalue)
while executing the procedure how to pass the value... or procedure itself has problem...?
Help me...
Tx in Advance...
View 2 Replies
View Related
Apr 28, 2008
Well is there a way to pass the hardcoded values in a package externally
like for example if in a file system task i have specified the location for moving my files after processing, this will be a harcoded value how can i pass it externally so i have not to go into the package if in case i have modify it to some other location.
View 9 Replies
View Related
Nov 13, 2001
Hi,
this is my second attempt to get an answer to this question.
We want to strip our firstName column and lastname column of any punctuation that might be present.
What's the best of doing that?
Is my only choice to write a nested REPLACE for each character we want replaced (which will end up being very very long) or is there another way.
thanks
Zoey
View 2 Replies
View Related
Oct 16, 2007
Ok here is what I have
Department:A
Line 1 Name: George
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
125254 Test 10
Total: 80% 40
Name: Mik
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
Total: 70% 30
Name: Jonathan
Addresss date raise
125254 Test 10
125254 Test 10
125254 Test 10
Total: 70% 30
Line 10
Line 15 Total for this division: 33% ((100 )/3) 100
Department:B
€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦€¦..
Here is what I did I have a list control that is grouped by department. this will get me the info from Line 1 to Line 10 then this list control is actually under another list control that is grouped by department to get the info from Line 15. I used this example for simplicity and what I am doing is fairly similar to this situation. My problem is, I need to find away to know how many totals I have to count the total for the entire department. In other words : from the example above how can I know I have to divide by 3 to get 33%. I can get the 100 without any problem but I can€™t tell what number I need to divided by. I tried to use Count(Name.Field) I was hoping this will give me 3 which indicates the divided number. But I was getting 7 for some reason.
How can I get the number of times the list control was implemented for one department which is in this case 3?
thanks
View 2 Replies
View Related
Nov 12, 2007
Hello.
I need to store 2 values that i retrive from a databse into variables so i can check them towards what is typed into the textboxes for my login script iv built. How can i do this?1 string myConnectionString = @"Data Source=.SQLEXPRESS;AttachDbFilename=C:UsersalhoDocumentsIntrapointWebApp_DataIntrapoint.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True";
2
3 SqlConnection myConnection = new SqlConnection(myConnectionString);
4 SqlCommand cmd = new SqlCommand("SELECT [username], [password] FROM [company] WHERE (([username] = @username) AND ([password] = @password))");
5 cmd.Parameters.AddWithValue("username", TextBoxUsername.Text);
6 cmd.Parameters.AddWithValue("password", TextBoxPassword.Text);
7
8 myConnection.Open();
9
10 //how do i pass the values retrived into variables, like string usrname and string password?
11
12 myConnection.Close();
View 13 Replies
View Related
Mar 21, 2008
I have a stored procedure. Into this stored procedure i need to pass values to a 'IN' statement from asp.net. So when i am passing it , it should b in like a string variable with the ItemIds separated by commas. the procedure i have is :
create procedure SelectDetails
@Id string
as
Select * from DtTable where itemid in(@Id)
Here the itemid field in DtTable is of type int. Now when i execute the produre it is showing error as the Itemid is int and i am passing a string value to it.
How can i solve this problem?
View 4 Replies
View Related
May 7, 2008
I am doing report development against OLAP (Cube). I have a parameter which is a multi-value parameter, and I need to pass this as a parameter into a sub-report (pass all the values selected in this multi-value from the main report to sub report parameter).
Is this even possible? If yes how do I achieve this.
Currenty I sent like Fields!Region.Value(0), but I want to send actually Fields!Region.Value() (meaning all selected).
Any help ASAP is appreciated.
View 3 Replies
View Related
Jul 20, 2005
This one is interesting...Is there any way to pass a joined parameter into a UDF as I'm attempting below?I have a temp table that I'm trying to create:create table #t3(bmkPerson int primary key,LangCode nchar(5),SName varchar(1000))insert into #t3select t2.bmkPerson, t2.LangCode,select SName from SName_trans_udf(t2.LangCode)from #t2 t2Thanks in advance,RenaeJoin Bytes!
View 1 Replies
View Related
Apr 20, 2007
Hi,
I'm trying to pass multiple values to a single parameter from a report to a second report. For instance I want to pass the values a user selected in the original report, such as the countries a user select under a Country filter, and once the second report is called, I want that report to filter on those same countries, right now I can only pass one of the values selected to the second report. If someone can let me know if this is possible it'd be much appreciated, thanks in advance.
View 1 Replies
View Related
Nov 12, 2015
In t-sql 2012, I want to run a query where the value is normally an int value. I want to supply a large volume of custID values that are normally int values. I have tried to use a cast and convert values and that does not work. The query that I am trying to use is the following:
DECLAREÂ @custID varchar(200)
set @custID = '72793,60546,91069'
select * from table
where in (@custID)
Thus can you show me the t-sql 2012 that I can use to accomplish my goal?
View 12 Replies
View Related
Aug 29, 2006
Version: ASP.Net 2.0Language: C#Hello Everyone!I'm saving data from a function to an SQL Server 2000 db via a stored procedure. There are a few fields which are conditional and thus need not be passed to the procedure everytime. Under those circumstances I need to store null values in the fields.The problem is if I the value of the parameter as null, VS throws the error that a required parameter is not passed. I tried setting 'IsNullable' property of the parameter to true but it works for only those fields who are declared NULL in the stored procedure (For e.g. @DOB DATETIME = NULL).Strangely, this works well in classic ASP.Does anyone know how to accomplish this? Note, altering stored procedures is not an option for me.Thanks a lot!
View 4 Replies
View Related
