Password History With CHECK_POLICY And CHECK_EXPIRATION

Sep 11, 2006

I've tried to find a definitive answer to this but I cannot. If CHECK_POLICY = ON and CHECK_EXPIRATION = ON will password history be checked when a user changes their password? By password history I mean the idea that a password once used cannot be used again for another X password resets....

If password history does work, why would executing the following statement multiple times then work?

ALTER LOGIN Bob WITH Password = '123User321'

If I execute this statement four times in a row wouldn't I get a message that I cannot reuse the password on the second call?

Thanks in advance

View 3 Replies

Check_Policy - Check_Expiration

Sep 19, 2007

Is there any way to turn off the CHECK_POLICY = OFF,
CHECK_EXPIRATION = OFF so that all the accts. created can be created through the management console without checking either of these?
Thanks,
R /p

View 1 Replies View Related

SQL Login Password Change History

Oct 4, 2007

Hello.

Is it possible to find out a complete history of when the passwords for any SQL Server logins were changed and by what/whom in 2005 standard edition?

Thanks.

View 1 Replies View Related

SQL Server 2012 :: Password History Table

May 7, 2014

I have a table of users including: UserName, Password (comuted col), FirstName, LastName, Address and other details....

I have to keep 10 Recent passwords , so I created another table "ut_Password " (Table2)

This table contains the following columns : Username, Password , and Password_Date.

I searched a lot but could not find something similar in my opinion need SP for it.

- 10 row Max for Password History in table 2
- when user change password it's need to be uniqe and it should not appear last 10 passwords
- Each user can have a maximum of 10 lines containing history password table
- Most old password deleted and replaced with a new password will enter the correct date (FIFO method first in first out).

View 9 Replies View Related

Need Sp_addlogin With CHECK_POLICY = OFF

Jul 17, 2006

Hi

We are using SQL Server-2005 as backend,

i had code like,

sp_addlogin 'a', 'a'

this give error as

"Password validation failed. The password does not meet Windows policy requirements because it is not complex enough"

as this is not full fill the Windows Password policy.

I too check the Local Security Settings is disable for the password settings.

I know i can use

CREATE USER <user> , CHECK_POLICY =OFF

but i want to set CHECK_POLICY =OFF, with the

sp_addlogin stored Procedure.

Any help,hint or code to solve this ???

Regards,

Thanks.

Gurpreet S. Gill

View 8 Replies View Related

SQL Login CHECK_POLICY Calculations

Sep 20, 2007

Hi.... I'm querying for SQL -logins whose passwords are about to expire.

If Active Directory has a password expiration policy of x days, which is the correct query to use?

SELECT name, DateAdd(day, x, create_date) FROM sys.sql_logins WHERE is_expiration_checked = 1

or

SELECT name, DateAdd(day, x, modify_date) FROM sys.sql_logins WHERE is_expiration_checked = 1

Or is this stored elsewhere from sys.sql_logins?Thanks.

View 1 Replies View Related

Data Access :: How To Recover Forgotten Password When Remember Password Option Checked

Jul 24, 2015

I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.

View 3 Replies View Related

SQL Server Agent Job Will Not Retain Package Password (encrypt Sensitive With Password)

Apr 1, 2008

I have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.

I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.

This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..

The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E

and I get

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF

although the same code executes perfectly from a command prompt.

Please does anyone have any experience with a similar problem and if so, how did you get round it?

Thank you

View 9 Replies View Related

SQL 2005 SP2 - Windows 2003 Ent SP1 - Password Does Not Meet The Password Policy DLL

Jun 18, 2007

I am receiving the following error message when attempting to create a new SQL Authenticated login id.

Password validation failed. The password does not meet the requirements of the password filter DLL. (Microsoft SQL Server, Error: 15119)

I have four servers all running SQL Server 2005 SP2 on Windows 2003 Ent. SP1. Of the four servers, only one received the above error message using the same TSQL below.

CREATE LOGIN TEST_LOGIN WITH PASSWORD = 'pvif9dal' MUST_CHANGE, CHECK_EXPIRATION = ON

All four servers are in the same domain, which if I understand correctly, the password policies are therefore inherited at the OS level by the domain. The password being used is within the password policies of the domain.

Any ideas as to a root cause?

View 5 Replies View Related

The Sa Password Must Meet SQL Server Password Policy Requirements.

Jun 30, 2007

I tried to install an ALLDATA database which run with SQL Server 2005 express edition. The data base fails to install becase of the following code that come up which is related to AS password requirement. The error that come up is:

TITLE: Microsoft SQL Server 2005 Setup
------------------------------

The sa password must meet SQL Server password policy requirements. For strong password guidelines, see Authentication Mode, in SQL Server Books Online.

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=28001&EvtType=sqlca%5csqlcax.cpp%40SAPasswordPolicyCheck%40SAPasswordPolicyCheck%40x6d61

------------------------------
BUTTONS:

&Retry
Cancel
------------------------------

I am trying to install this database in a network server operating under Windows Server 2003 R2 with SP2. If anyone knows how to solve this problem, please let me.

Thanks,

Amilcar

View 6 Replies View Related

Remember My Password Is Forgetting Password

Mar 11, 2008

On the login prompt for Report Server, there is a checkbox option to "Remember my Password." I check this, login successfully... but when returning to the Report Server, I am again prompted for the password, although the user name is saved. No matter how many times I do this, the password will not save in IE7. I have tried this on 3 different computers with IE7. In IE 6, I do not even get the checkbox as an option, just the user name/password prompt. In Firefox, the password saves fine. Any ideas what would be causing this?

Thanks,

Brian

View 1 Replies View Related

Export Username / Password To CSV File To Test SP To Output Username / Password

Jun 2, 2014

I put this together to export the user name /password to a csv file to test my SP to output the user name/password.

DECLARE @user_name varchar(50)
DECLARE @psswrd varchar(10)
SELECT @user_name ,@psswrd
FROM ngweb_bulk_enrollments
EXEC master.dbo.xp_cmdshell 'bcp NGDevl.dbo.ngweb_bulk_enrollments out C: est.csv -Sserver1 -T -t, -r
-c'

This works but I don't get the headers in the file. How can I include the headers?

View 7 Replies View Related

Equivalent To MySQL's Password() Function? (was MySQL To SQL Server And Password())

Mar 3, 2005

I have an internal Project Management and Scheduling app that I wrote internally for my company. It was written to use MySQL running on a Debian server, but I am going to move it to SQL Server 2000 and integrate it with our Accounting software. The part I am having trouble with is the user login portion. I previously used this:

PHP Code:

$sql = "SELECT * FROM users WHERE username = "$username" AND user_password = password("$password")";

Apparently the password() function is not available when accessing SQL Server via ODBC. Is there an equivalent function I could use isntead so the passwords arent plaintext in the database? I only have 15 people using the system so a blank pwd reset wouldn't be too much trouble.

View 7 Replies View Related

Job History

Jul 24, 2001

The 'view job history' on Enterprise Manager is showing me only 4 or 5 run histories. I want to see more history on each of the jobs.Even I changed the limit to 10000 lones from 1000 lines on the server properties in the job system option, I am still seeing only the last 4 or 5 histories for each job(there are a total of 70 jobs on the server).Any ideas??Thanks.
Reddy.

View 1 Replies View Related

Job History Not There

May 15, 2000

Anyone tell me why some of my SQL-agent jobs have no history?
Some jobs are reporting history fine, others say "No history"

View 4 Replies View Related

Job History

Jul 6, 2000

I have set up a job as sa.After that I changed the sa password.Now I am not able to view the job history since then.Do i need to delete the job and reschedule it?

View 1 Replies View Related

SQL Job History ???

Aug 18, 2004

I have a question about the sql job history. I have a sql 2000 server that was recording all the job history on my sql jobs just fine until the other day. Today I checked the history and the jobs didnt show the past history anymore. Just today's history. So if the job didnt run today there is no history for that particular job. This isn't true, the job was run a few days ago. I know that no one went in and cleard the history on the jobs. What causes this issue, is there a way to not make this happen in the future? Is there a way I can recover the past history for my jobs.

Thanks for your time!! TIA

View 11 Replies View Related

Where To See Job History

May 16, 2012

i have my job running every 5 min. I want to view the history log. In job history it shows only few hundreds of records.. But i want to see from beginning. where to view whole log of job history?

View 8 Replies View Related

Database History

Jan 14, 2008

hello,
I'm am looking for a smart solution for keeping history of changes in records in my sql database. Not only history of a record but also which user caused the change and when (I have the username in session).
for now I added 4 fields to each table: "created by","created on","cancelled by",cancelled on", when the user create a record the 2 first fields are filled and and a user delete a record the two last fields are filled and the record is not really deleted but it won't be shown again (I'm using "where createdby is null").
this solution is taking the performance down and it does not solve the editing record tracking. creating new records and cancelling old ones for editing/changing solve that but than I m having problems with the primary key and relations to other tables.
I tried also to use a table that holds records that descirbes every change in records in my tables. it's very hard to search old data that way.
I know that oracle databases has a smart solution for history... please someone advise me..
Elad.

View 1 Replies View Related

Maintaining History

Jun 11, 2008

hi ,
i am working on an application using c#, visual studio 2005, sql server 2005.
i have a few tables in sql server 2005.
i need to save the history. (i.e) all the inserts, updates, and deleats performed on the tables.
can any one suggest me how can i achieve that.
should i use triggers and save the changes in another table ???
waiting for your suggestion??
thank you

View 13 Replies View Related

Keeping Job History ...

Aug 26, 2002

SQl7, sp3, NT4

How do I keep th job history of a job, say if I re-create the job?

We recreate the jobs often as part of a code move, but I'd like to retain the history of the previous jobs?

** sp_help_jobhistory -- only shows the jobs that exist, and not old jobs that no longer reside on the server.

Thanks,
AJ

View 1 Replies View Related

Procedure History

Sep 12, 2000

Hi,
I want to know where the history of stored procedures stored, I mean yesterday I created one procedure and today I dropped that procedure and recreate it, I checked in sysobjects table name,crdate it shows only the creation date of the procedure. Where can I find the Modification date or something related to procedure history.

Thanks in Advance,

Seenu

View 4 Replies View Related

Conflict History

Feb 13, 2001

Hi

I'm using merge replication between 10 SQL server 7.0 SP2 machines. One central server is the publisher and 9 subscribers. I�ve setup an alert to get a message in case of conflicts. I defined it to trigger everytime the performance counter conflicts/sec rises above 0.

After some experimenting this seems now to work reliable, but there is still one point which bothers me. All conflicts are kept in the conflict history and everytime I get a message through the alert the number of copnflicts stated in the message increases by one.
Also if I open view replication conflicts in EM all conflicts can still be viewed even those I manually resolved. I can't even find a way to seen which conflicts are new ones and which have been resolved already. Does anybody know a way how to reset this numbers without going through all the conflict tables.

Markus

View 1 Replies View Related

Scheduled Job History

Oct 4, 2000

In SQL 6.5, when a scheduled job failed, you could see the error message in the history. In SQL 7.0, it simply tells you which was the last step to run. Is there a place which will report the actual error message generated by the task?

View 4 Replies View Related

Job History...URGENT!!

Jul 6, 2000

I have set up a job as sa.After few days I changed the sa password.Now I am not able to view the latest job history since then.It says the last run as 'succeeded',but it is not showing the latest history since the time I changed the password.It still shows the previous history only.Do I need to delete the job and reschedule it?
Thanks!

View 2 Replies View Related

Where's Task History In 7.0?

Aug 25, 1999

I feel stupid asking this because I have worked with SQL Server 6.0/6.5 for serveral years now, but I can't seem to find the task history in 7.0. When I look at a task, I can tell if each step ran or not, but I am used to seeing error messages upon failure by right-clicking on the task and choosing history.

How do I find this in 7.0? In casual looking for a few days, I've come up empty.

Thanks.

View 2 Replies View Related

SQL Job History To HTML

Apr 21, 1999

I heard there is a way to publish the results of SQL 7 jobs to HTML files.
has anyone tried this

View 1 Replies View Related

View Job History

Aug 19, 2000

Hi
I have a full database backup scheduled at 2AM in the morning
everyday and If I see that job status in Sql Server logs
current activity , it shows me that database has been backed
up at 2AM....But the problem is when I go to jobs and try to
do a view job history it doesn't give me the details of the
job and I didn't clear the job history..Can anyone tell me the
reason why it doesn't show me the job history.

Thanks
RAGHU

View 2 Replies View Related

DB Expansion History

Feb 15, 1999

Hi -
In order to restore a DB on another system I need to know the exact expansion history of the source DB in order to create/expand the devices on the target system the same way...
Is there a way for me to see the history of expansions I did on a DB ??
Tanx,
Paul

View 6 Replies View Related

Tracking The History Of Changes.

Sep 11, 2006

Hi all,

I have several transaction tables on which I need to track the changes. That is I need to maitain
the history of changes. Only few column values are changed often.

Which is the best way for tracking the changes.

1.Store the whole record after the change ?

Or

2.Store the ColumnName & its respective old & new value ?

Or any other better.

Note : UI part & SP's will take care of the tracking & no plans for triggers.

Thanks in advance,

HHA

View 2 Replies View Related

Cube History

Mar 25, 2004

I am trying to build a cube to monitor the sales performance. My measure is the sale amount. My dimensions include 1) Time 2) Sale hierarchy (salesman, sales office, region), and 3) Product Line. The problem I have is that when the salesman move from one office to another, the sales occured before this movement should continue to be credited to the old office. Only sales happen after the movement should be credited to the new office.
How should I implement the cube to achieve this effectively? We have more that 40,000 sales, about 500 offices, in the company to monitor. So I don't think keeping a copy of the sales hierarchy whenever there is a change is feasible.

Any inputs will be highly appreciated!

Thanks.

View 3 Replies View Related

Linkserver History

Jun 18, 2008

Hi Gurus,

How can i get linkserver history as when was link server created, lastmodified datae...etc...

Thanks,
ServerTeam

View 2 Replies View Related

System History

Nov 9, 2005

I have a table with video information
(
Name varchar(30) null,
Serial_no int(12) null,
Agency_no int(8) null,
Agency varchar(30) null
)
When items are damaged they are sent to our agency #5. I would like view not only the items that are assigned to our Agency but also what Agency owned this equipment BEFORE us.

M. Almeida

View 1 Replies View Related