Path To My Database?????
Jun 14, 2008
Hey everyone,
I'm in the midst of setting up hMailServer on my server and at one point it tells me to enter the name of my database I setup for my email. I entered my database name along with the username and password to access the database. What I'm lost on is the database server address. I thought that would be localhost but I wasn't quite sure and I was hoping that someone might be able to help me with this.
Thanks for any help,
QWERTYtech
View 1 Replies
ADVERTISEMENT
May 14, 2007
Hi, all experts here,
Thank you very much for your kind attention.
I am trying to modify the files path (primary file, log file) of databases, but it looks like I am not able to mofidy their files path directly from the database property dialogue? Would please any experts here give me some ideas on what else can I try to figure it out? Thanks a lot in advance and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Apr 16, 2008
When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
Thank you!
Gary
View 3 Replies
View Related
Oct 4, 2007
After updating TempDB path to a wrong path (without file name only folder name) the service is not starting. How can i sovle this and start the service
thanks
Leena
View 13 Replies
View Related
Mar 26, 2007
hello
when i change the database path or sub directory then
i can not open it directly. and the computer is restart again.
what i do becasue all time if some error occur the pc is restart?
give me any idea
View 1 Replies
View Related
Nov 14, 2007
Hey guys,
I uploaded my website from VWD Express to ipower. My database did not work, which I have learned upon some research should have not been a shock to me, but most definetely was. When I contacted tech support they told my that my web.config files were pointing to my local paths. That I should change them and I should be fine. Elsewhere, in the knowledge base I found the strConnect that I am under the impression I need to use.
strConnect = "Provider=SQLOLEDB; Server=SQL-A1; UID=account_username; PWD=account_password; Database=user_db_name" oSQLServer.Connect strServer,strLogin,strPwd
The problem is, I'm a complete newbie, learning as I go and I can't find anything on where or how I insert this into my web.config to correct my paths. IPower will not help with coding. I know my current connection string is in web.config in the appsettings, that's about as far as my knowledge goes.
So, could anyone show me how I go about putting this into my web.config? Examples are very helpful :]
On a side note, I've been reading that this is a common problem among newbies like myself. So, is changing these files actually going to work, or am I wasting my time? Also, before I get knee-deep into it, is the database-publishing kit put out by MS the way to go here?
Thanks for any and all replies, you guys are always awesome.
View 6 Replies
View Related
May 26, 2006
Hi:
I'm using SQL SERVER 2005 EXPRESS
My server name is SERVER1SQLEXPRESS
When I create a new data base on my server it saves at
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData
How Can I change this default path?
Thanks!!
View 2 Replies
View Related
Mar 20, 2001
I am new to MS SQL 7.0, I like to know what is the best way to move the location of a database to a new path on the same machine.
I have mostly MS SQL 7.0 sp3, only one MS SQL 6.5 with sp5.
View 1 Replies
View Related
May 5, 2008
Hi-
I have installed a SQL 2005 software and created 4 instances and 4 databases on each server namely , Adventureworks , sample , testdb1, testdb2.
After creating these many databases , i was very confused to find out the actual database files in Programfiles directory as each instance was created in a separate directory namely MSSQL.1 , MSSQL.2...etc.
how do i identify the correct database path for sample database in instance3.
is there any system tables or stored proc that i can user to identify this path.
tanks
View 4 Replies
View Related
Jul 20, 2005
Greetings,I have to admit that I'm still a beginner in the database field, but I'mactively studying, and this is why I will be utterly grateful for theproper, accurate, and wise guidance to the right direction or specificpaths of database studies.I simply want to make my first major database project a "personalknowledge database" or a "personal encyclopedia", so to speak. By this Imean that I want to gather diverse, multi-format bits of knowledge intoa single database divided into major categories, sub-categories, and soon. For example, I want to scan collected articles from newspapers &magazine and save them as images, type hand-written notes into thecomputer and save them as MS Word or Text files, save audio files withsearchable keywords, even save searchable MS OneNote audio & text files,all into directories & sub-directories. Then I want to be able to searchall these files for specific words or subjects; sort them according todate, subject, etc; update, add to or append, edit, or even cut & paste(within) any of those records in the database, which rely on easilycustomizable formats like text & images (in contrast with audio files orOneNote files, for example).I also want to prevent wasting time in the future, by avoidingrepetitive, same-keywords typing for every non-text new entry, like animage or audio file, by having a customizable keyword list open (byright clicking for example), where one could mark all the relevantkeywords for the picture or audio file. Also have a short descriptionfor each one of those entries when needed. And I want to be able to addslick, good-looking graphics to the interface of the database and theforms of the records.Basically, my priorities include: saving time filling the database withknowledge, quickly & accurately finding the future targets of anysearch, presenting the search results in a highly comprehensible &organized form, and a good looking interface & forms for every entry,which are pleasing to the eye and encouraging to study.I already use graphics applications for the "looks" part. So my questionis: what are the technologies or applications that I should learn byheart and use in order to design such a database in the best way? WouldMS Access alone do it all for me? Or should I learn other technologies?I'll be grateful for anyone taking the time to help. Thanks.Sincerely,Yasso"Claiming that God does not exist because there are people suffering anddying is like saying that barbers do not exist because there are peoplewith long hair! Truth is: they suffer because they did not find God ordo not go to Him, just like the others did not find a barber or do notgo to one."*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Aug 9, 2006
When I try to create a new database on a network path, I get the following error:
"\server est estdatabase.mdf" is on a network path that is not supported for database files.
Am I trying something that isn't possible? Should databases always be stored on the server PC running SQL (Express)?
I'm using Visual Basic Express and SQL Express (installed on a local PC not the server, so the connectionstring is ".SQLEXPRESS"), TCP/IP is enabled.
Regards, EBA
View 4 Replies
View Related
Mar 10, 2008
I have a database that I have made with Sql Server 2005 Express. I am building a windows app using this db as the back end. I am using visual C# Express as well.
I found out during this project that I had to detach my database in order to establish a new connection to it using the express editions. I learned that this is a short coming of the Sql Server 2005 Express Edition. So I detached my db. When I reattached my database the name had the path to where the file was in it's name. I don't think I have done anything to cause this. But, obviously something went wrong.I have a jpeg screenshot of this but can't post it in this forum.
I created another small database as a test to see if the same thing would happen again. The database only has one table with two columns. I detached and then reattached it with no problems. It did not get the weird file name that automatically included the path to the file.
Does any one know what is going on with this? Do you know how I can reattach this database and only have the original name(not the path to the file)?
Thanks
View 5 Replies
View Related
Mar 11, 1999
Hi, I've to restore a bk into a new DB, because the old one has a lot of devices created on different places and phisical disks.
Im not sure to do that, cause Ive heard some problems with this action.
The old Db has 10 devices of data and 10 devices of log, and I want to create only one device of data (sum of all the data devices) and only one device of log (sum of all log devices)
Is it possible or not?
Tnx a lot!
View 2 Replies
View Related
May 1, 2007
Hi,
In my system, for creating a databae the default path is in C: drive, but iwant to change into D: drive as a default path.Please tell me how to change??
View 10 Replies
View Related
Sep 1, 2006
I have two, probably related, problems:I have a very simple site. It will be used on the local intranet only. I want to use the windows authentication so users do not have to log on. The aspnetdb has been created using the configuration tool. If I use Server Explorer in vs to work on the site on my local machine, I can open aspnetdb, look at its tables, etc. If I use Server Explorer in vs to work on the site on the server, aspnetdb will not open and gives this error message: ..."network path that is not supported for database files"...Other sites on the same server give the same message, but the sites work. I think this is because they can read the file but not write it; but that is a guess. We have tried everything; my head is ready to explode. We are using SQLServerExpress. It resides on the server's C drive (as does our data database). The web site, and hence the aspnetdb are on the F: drive of the same machine. Does SQLServerExpress treat the F: drive as a UNC drive? If so, are we in deep doo doo? I'm at a loss.As far as logging in: If I debug from vs, the login works beautifully both on my local machine and running from the server using vs. Login does not work when accessing the site from iexplorer. Mystified by that one, too. I tried to implement profiles and they crash, too; that led me to consider a write problem.Don't know what to do; any help is appreciated.
View 1 Replies
View Related
Nov 23, 2005
Hello,
Completely new to this stuff, so sorry if I'm asking
something that is painfully simple to resolve!!! Also, not sure whether
there are standard formats for code, errors etc.
OK. When I create a Login.aspx file in VWD Express on my local Hard Disk Drive, the file works and runs correctly, allowing
me to log in etc.
However, when I do exactly the same thing using a remote Network Drive connection to an Intranet server, when you enter the
Username and Password, and Click the Log In Button, the following error message appears:-
The file "[Network Drive]AuthorsApp_Dataaspnetdb.mdf" is on a network path that is not supported for database files.An
attempt to attach an auto-named database for file
S:AuthorsApp_Dataaspnetdb.mdf failed. A database with the same name
exists, or specified file cannot be opened, or it is located on UNC
share.
Then I get the following information - which I'm sure is supposed to help, but doesn't!!!
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
The file "S:AuthorsApp_Dataaspnetdb.mdf" is on a network path that
is not supported for database files.An attempt to attach an
auto-named database for file S:AuthorsApp_Dataaspnetdb.mdf failed. A
database with the same name exists, or specified file cannot be opened,
or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of
the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): The file "S:AuthorsApp_Dataaspnetdb.mdf" is on a network path that is not supported for database files.An attempt to attach an auto-named database for file S:AuthorsApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +115 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3244 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +56 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +1083 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +272 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +687 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +82 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +558 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +126 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +651 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +160 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +122 System.Data.SqlClient.SqlConnection.Open() +229 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +114 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +225 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +157 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +68 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +100 System.Web.UI.WebControls.Login.AuthenticateUsingMembershipProvider(AuthenticateEventArgs e) +100 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +113 System.Web.UI.WebControls.Login.AttemptLogin() +178 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +134 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +107 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +178 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +72 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3838
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
All assistance greatly appreciated!!!
View 1 Replies
View Related
Jun 6, 2007
Hello. I am attempting to add a distribution database to an instance of SQL Server on my local PC. I am using SQL 2005 Developer Edition. I am able to set the instance up as a distributor using the following command:
exec sp_adddistributor @distributor = N'computernameinstancename'
I use the following command to create the distribution database:
exec sp_adddistributiondb @database = N'distribution', @data_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData',
@data_file_size = 4, @log_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData',
I get the following error when executing that command:
Msg 14430, Level 16, State 1, Procedure sp_adddistributiondb, Line 214
Invalid destination path C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData.
It's not due to permissions on that particular folder. I have tried using other folders, all with the same results. Also, I am an Administrator on the PC, so I have full permissions. I have tried running the SQL Server services as myself and Local System. Same results both times. Co-workers with apparently the same setup are able to create the distribution database without a problem.
Has anybody had this type of problem?
Thanks,
Evan
View 5 Replies
View Related
Oct 10, 2006
Hi everyone,
I am working on a Hospital Information System project with a team of 6.Each one of us builds or modifies a part of the system and shares the project over a common repository. The problem here is that we use the absolute path of the database in our connection string. Although the directory structure of our project is the same for each member, since the main project folder itself is stored in different locations on each person's computer (for example, one may have it stored in c:My Documents and the other in d: My Documents), we are forced to modify the connection string manually each time someone else from the team updates the repository with the database. How do we make the path of the database relative so that we don't have to modify the connection string manually each time after receiving an update from the repository?
Your help is greatly appreciated.
View 1 Replies
View Related
Sep 23, 2014
While doing the restore of the database is it better to copy the backup file locally and restore or restore from the network path is good option?
What kind of the problems we may get restoring the backup from the network path?
View 9 Replies
View Related
Dec 3, 2013
I need a SQL query which lists out directory path from which the database has been restored recently ( i.e backup path ).....
View 2 Replies
View Related
Jan 28, 2008
Hello,
I would like to deploy a per-machine Express database as part of my VS2005 C# desktop application. The deployment must work with both XP and Vista from the same setup files. I'm not using One-Click installation. I don't want my users to have to configure Express with the Surface Area Configuration tool.
Since the database cannot go in C:Program Files because of Vista ACL issues, I am using COMMONAPPDATACompanyNameAppName as the install path for the database and other user writable application files. In XP this expands to C:Documents and SettingsAll UsersApplication DataCompanyNameAppName and in Vista it is C:ProgramDataCompanyNameAppName. Neither of these paths have write privileges for unprivileged users, so the install program needs to change the write permissions at install time. Right now I am using SetACL ( http://setacl.sourceforge.net/ ), to do that and the install goes fine with write permissions on the companyName folder and it's children for all users.
But I can't connect to the mdf file in my COMMONAPPDATACompanyNameAppName folder. If I am the administrator/installer it works fine, but as an unprivileged user I get different errors, but mostly "Could not login user ...". For debugging, I have also tried installing the database in the "AppFolder" directory (which for my app in both Vista and XP is C:Program FilesCompanyNameAppName) and using "User Instance=true" in the connection string, and the connection is made but (at least on XP) the unprivileged user cannot write to the database because the folder lacks write privileges for that user.
I suppose one thing I could do would be to change the folder/file permissions in the AppFolder, but I am reluctant to do that because I have read that Microsoft does not guarantee that the "Compatibility" feature in Vista for the Program Files directory will be available in future releases/service packs.
So is there a way to do a simple installation/db connection for a per-machine database located in a COMMONAPPDATA path?
Thanks for your help.
View 13 Replies
View Related
Aug 29, 2007
Hi,
Can we create full-text index on a document that resides on a file system and we have got the path to that document in the database.
Thanks and regards
Salil
View 1 Replies
View Related
Jun 22, 2007
All of the books I have about Visual Basic 2005 Database Programming, gives examples of connecting to a database on a localhost computer. But what about the connection to a database on a sql server 2005 on a computer wich can only be reached via the internet ? Is that possible without using ASP.NET ?
My problem:
I have a desktop with a sqlserver 2005 database . This desktop is connected with the internet . The IP address is a dynamic IP address.
On my laptop is a ADO.NET 2.0 program that needs to be connected with the database on my desktop.
What kind of address do I have to specify in my connectionstring in order to get connected to the database on my desktop , which can only be reached via the internet ?
I'm I wright to suppose that in the case of a static IP address, all I have to do is put the IP address in the connectionstring in order to get connected with my desktop via the internet? Are there some changings to be made in the settings of the SQL SERVER 2005 on my desktop ? What about the security ?
On the other hand , because the address of my desktop is a dynamic IP address, how do I solve this problem.?
I've heard about a program DynDns that can solve the problem of the dynamic address. Can i use this program together with my ADO.NET program to solve the problem , and how do I specify in this case the address to the database on my desktop in the connectionstring?
Is there someone who has experience with that program and the problem I described here ?
Thanks for the help !!!
View 1 Replies
View Related
May 8, 2007
I am having difficulty restoring a database (DB_1) with 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf,
Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf,
One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
Any help will be highly appreciated.
View 3 Replies
View Related
Mar 17, 2014
I've configured log shipping to use for DR purposes. I'm concerned that the physical location of the secondary is mis-reported by SQL Server Management Studio.
Viewing the secondary location (with Studio DB_name Properties Files) shows the path of the primary DB (I expected it to show the path of the secondary).
This SQL command shows the correct/actual paths of both primary and secondary DB's when run on their host servers.
SELECT name, physical_name AS CurrentLocation, state_desc FROM sys.master_files
Is this just cosmetic?
Here is an Example of how the Studio shows the incorrect path for the secondary.
Example:
(Primary) servername=prodSrv, DBname=aquaDB, Actual_Path=G:aquaDB, SQL-studio-Properties-Path=G:AquaDB, sys.master_files Path=G:AquaDB,
Log shipped to
(Secondary / Read Only) servername=DRSrv, DBname=aquaDB, Actual Path=F:aquaDR, SQL-studio-Properties-Path=G:AquaDB(WRONG), sys.master_files Path=F:aquaDR
View 2 Replies
View Related
Mar 3, 2006
I am using VS 2005, SQL 2005, SQL Mobile
The development environment & the SQL Box are two different boxes.
I am trying to create a simple application where I want to synchronize data between Pocket PC application's ( Emulator) local database(SQL Mobile) to SQL 2005 Database. I have tried the steps outlined in the following link
http://msdn2.microsoft.com/en-us/library/ms171908(SQL.90).aspx
Once I have completed all the steps as per the steps in the above link, I have copied the .sdf file to an another machine where I have the development environment. I have created a device application in VS 2005 and created a datasource poiting to the file (.sdf) copied locally.
Then I have added the following code
string filename = @"e:VelsunMobileTest.sdf";
public Form1()
{
InitializeComponent();
}
private void Form1_Load(object sender, EventArgs e)
{
DeleteDB();
Sync();
if (VelsunMobileTestDataSetUtil.DesignerUtil.IsRunTime())
{
// TODO: Delete this line of code to remove the default AutoFill for 'velsunMobileTestDataSet.Customers'.
this.customersTableAdapter.Fill(this.velsunMobileTestDataSet.Customers);
}
}
private void DeleteDB()
{
if (System.IO.File.Exists(filename))
{
System.IO.File.Delete(filename);
}
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl =
@"http://currdev1/VelsunMobileTest/sqlcesa30.dll";
repl.Publisher = @"currdev1xx";
repl.PublisherDatabase = @"VelsunMobileTest";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"VelsunMobileTest";
repl.Subscriber = @"VelsunMobileTest";
repl.SubscriberConnectionString = @"Data Source=""e:VelsunMobileTest.sdf"";
Max Database Size=128;Default Lock Escalation =100;";
try
{
repl.AddSubscription(AddOption.ExistingDatabase);
repl.Synchronize();
}
catch (SqlCeException e)
{
MessageBox.Show(e.ToString());
}
}
I would appreciate any help.
Thanks
-Sundar
View 1 Replies
View Related
Oct 1, 2014
I have a Windows Server 2012 R2 2 node cluster with SQL Server 2014 FCI installed. Data files are on a separate Windows Server 2012 R2 file server. Data files share has been permissioned to the SQL Server service and SQL Server Agent service accounts as Full Control. NTFS Permissions are Full Control.
When I try to attach a database
CREATE DATABASE AdventureWorksDW2012
ON (FILENAME = 'apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATAAdventureWorksDW2012_Data.mdf')
FOR ATTACHI get this error:
Msg 5120, Level 16, State 101, Line 4
Unable to open the physical file "apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATAAdventureWorksDW2012_Data.mdf". Operating system error 5: "5(Access is denied.)".
If I log into the file server (called APRICOT) and look at the NTFS permissions they all look good. I have also reapplied the NTFS permissions from the root folder down.
EDIT
If I log on to one of the nodes in the cluster as the SQL Server service account and navigate to apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATA and copy and paste the data file, it works fine.
EDIT2:
If I log on to the file server and Enable Inheritance at the root level, then Replace all child objects with inheritable permission entries from this object, I get this error:
User Account Control settings on all nodes and the file server are set to Never notify
View 0 Replies
View Related
Apr 28, 2015
Basically i have 3 images capacity per record in my asp.net application. In there i am saving the image path with record id in database and image in my application folder.
Now i am creating SSRS Report in Report builder . In there i have taken one image control to show the images. In the Image properties in report builder i have chosen database under the select the image source field. then inside use this field i have chosen image url and in use this MIME Type i have selected image/jpeg. Now i have saved this report in report server folder.
Now while calling in .net web from through report viewer control. It is opening the report but wont showing the image.
View 2 Replies
View Related
Feb 13, 2008
Sorry if this is not the correct forum... I am using the FOR XML PATH feature of SQL Server 2005 (Amazing!!) Is it possible to return multiple rows? For example:SELECT 'Field1' AS 'Element1/@Field1'FROM TableFOR XML PATH('Repeating') Say the above SELECT returns 5 records, I want it to return 5 rows of xml in my ASP.NET application. So in this case each of the 5 rows would contain:<Repeating><Element Field1="Field1"></Element> <Repeating>Instead of returning 1 row with all the xml together.
View 2 Replies
View Related
Apr 16, 2008
Greetings
When using sp_xml_preparedocument @hdoc OUTPUT, @doc I see code everywhere with huge xml text embedded in some store procedures. Can the
SELECT XXX
FROM XXX
FOR XML PATH('') syntax be used instead to produce the second parameter @doc (xmltext) for sp_xml_preparedocument ?
Thanks
View 1 Replies
View Related
Dec 19, 2007
Hi,
Im trying to reference a ExcelFilePath connection properties using a UNC path, however it doesnt seem to like it, when i use a mapped drive everything works fine.
Can UNC paths be used in ISIS ?
View 8 Replies
View Related
Jun 4, 2007
Hello to all,
help, help,...
i have with this problem since 3 weeks, until now i cann't resolve this problem. Maybe can somebody help me. I am hopeless.
i have a data table ValidRelationship, i will check if there is a relationship between two members by this table.
datas in the table ValidRelationship:
IDMember IDOtherMember IDType
3700
3726
10000
3726
3700
10000
3742
3672
10000
3672
3742
10000
3422
3548
10000
3548
3422
10000
3548
3717
10000
3717
3548
10000
3675
3695
10000
3695
3675
10000
I will give two member and check their Relationship with a sql query. but it can be that this two member have no relationship. So i define here that man should search processor <= 6 . To better describe i use a example: max. Result of this query is: 1-2-3-4-5-6. If this is a relationship between 1-7 is 1-2-3-4-5-6-7, but i will give a answer that this is no relationship between 1-7. because processor > 6.
But my problem is: this query executing is too slow. if i habe two member no relationship, the time of this complete sql query to execute is more than 1 minutes. Is my algorithm wrong, or where is the problem, why this executing is so slow? How can i quickly get the relationships between two member, if my algorithms is not right? The following Query is only to processor = 3, but it works too slowly, so i don't write remaining processors.
declare @IDM int;
declare @IDO int;
set @IDM = 3418;
set @IDO = 4270
select top 1 IDMember
from v_ValidRelationships
where IDMember = @IDM
and @IDO in (select a.IDOtherMember from v_ValidRelationships as a where a.IDMember = @IDM)
select top 1 a.IDMember, b.IDMember
from v_ValidRelationships as a, v_ValidRelationships as b
where a.IDMember = @IDM
and b.IDMember in (select c.IDOtherMember from v_ValidRelationships as c where c.IDMember = @IDM)
and @IDO in (select d.IDOtherMember from v_ValidRelationships as d where d.IDMember = b.IDMember )
select top 1 a.IDMember, b.IDMember, e.IDMember
from v_ValidRelationships as a, v_ValidRelationships as b, v_ValidRelationships as e
where a.IDMember = @IDM
and b.IDMember in (select c.IDOtherMember from v_ValidRelationships as c where c.IDMember = @IDM) and e.IDMember in (select f.IDOtherMember from v_ValidRelationships as f where f.IDMember = b.IDMember)
and @IDO in (select d.IDOtherMember from v_ValidRelationships as d where d.IDMembe = e.IDMember)
If someone has a idea, please help me. Thank a million
Best Regards
Shasha
View 6 Replies
View Related
Apr 16, 2008
I have my SqlDataSource with my connection string:<add name="ConnectionString" connectionString="Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:UsersLaurensDesktopstockmanASP****.accdb" providerName="System.Data.OleDb"/> but I wanted to make a relative path from it because when I put it online i get an error. Thanks in advance
View 6 Replies
View Related
