Pb With Calculated Measure And Totals (grand Total Or Anysubtotals)
May 20, 2008
Hi,
I've created a calculated measure which is a division between 2 other measures which i also have displayed in the cube.
of course as soon as there is some level of aggregation, the shown result is an averaged division and therefore is wrong.
here is some example:
A 16874
B 956
C 1354
D 264
E 103
F 81
G 6
H 3
X 23
Total 5198.36...
here the wanted result would be a simple some of all the other values (=19664)
How could i treat totals/aggregation differently or have any good way of solving this issue?
I know there is the aggregatefunction propertie for normal dimension, but i'm not familiar with calculated measures and it seems properties that can be accessed through BIStudio's interface is rather limited.
thanks a lot in advance for your help. I've been looking for tweaks on the data to trick the cube, but couldn't find any way of getting the result i'm looking for.
View 1 Replies
ADVERTISEMENT
May 28, 2007
Hi,
I'm using sql server analysis services 2000, i have a problem with grand total when i select more than one member of any demension. the measure of this cube is built on a distinct count agregation function. i have only one measure in th cube
can some body help me !!
View 1 Replies
View Related
May 9, 2015
I have some data grouped in a table by a certain criteria, and for each group it is computed a subtotal for the group. Of the values from each of the group, I want to create a grand total on the report by adding every subtotal from each group.
Example:
...
....
Group1 Â Â Â Â Â Â Â Value
              10
              20
Sub Total 1: Â Â Â Â 30
Group2 Â Â Â Â Â Â Â Â Value
               15
               25
Sub Total 2: Â Â Â Â Â 40
Now, I would like to be able to add subtotal 1 (30) to subtotal 2 (40) and my grand total would be 70. Can I accomplish this task in SSRS?
View 5 Replies
View Related
May 13, 2015
In my cube there are two measures which are used in different calculations.Now I'm need to show in report if there any months in data when both or even another one of the measures is not updated (value = 0 or NULL).
how should I create the calculated measure for that?
I have tried in mgmt studio to plan this but I'm in a loop of errors.
View 4 Replies
View Related
Sep 15, 2015
In SSAS, I want to add a calculated measure and set that measure as the Parent of existing measure. For example I have the measures as A and B from the fact table. Now i want to add a calculated measure as C and set this measure as Parent for measures A and B. How to do that in SSAS.
View 4 Replies
View Related
Feb 28, 2007
I am new to SQL and have been given the task of adding Subtotals and a Grand Total to a report. Below is my code...can someone point me in the right direction?
SELECT
POP30300.POPRCTNM,
receiptdate,
VENDORID,
VENDNAME,
POP30310.ITEMNMBR,
SERLTNUM LOTNUMBR,
LandedCost = ISNULL(CONVERT(money,LOTATRB1),0),
STNDCOST = ISNULL(CONVERT(money,STNDCOST),0),
LandedCostStatus = CASE WHEN CONVERT(money,ISNULL(LOTATRB1,0)) = 0 THEN 'Missing' ELSE
CASE WHEN (CONVERT(money,ISNULL(LOTATRB1,0))-STNDCOST)/STNDCOST*100 NOT BETWEEN -30 AND 30 THEN 'OutOfRange' ELSE 'Okay' END END,
PONUMBER,
ISNULL(POP30310.UNITCOST,0) / ISNULL(POP30310.UMQTYINB,1) POPRICE,
ISNULL(QTYAVAIL,0) QTYAVAIL
FROM ODB.dbo.POP30300 POP30300 (NOLOCK)
INNER JOIN ODB.dbo.POP30310 POP30310 (NOLOCK) ON POP30300.POPRCTNM = POP30310.POPRCTNM
INNER JOIN ODB.dbo.POP30330 POP30330 (NOLOCK) ON POP30310.POPRCTNM = POP30330.POPRCTNM AND POP30310.RCPTLNNM = POP30330.RCPTLNNM
INNER JOIN ODB.dbo.IV00301 IV00301 (NOLOCK) ON POP30330.ITEMNMBR = IV00301.ITEMNMBR AND POP30330.SERLTNUM = IV00301.LOTNUMBR
LEFT JOIN ODB.dbo.IV00101 IV00101 (NOLOCK) on POP30330.ITEMNMBR = IV00101.ITEMNMBR
LEFT JOIN (SELECT ITEMNMBR, LOTNUMBR, SUM(QTYRECVD-QTYSOLD-ATYALLOC) QTYAVAIL
FROM ODB.dbo.IV00300 IV00300 (NOLOCK)
GROUP BY ITEMNMBR, LOTNUMBR) QTYAVAIL
ON POP30330.ITEMNMBR = QTYAVAIL.ITEMNMBR AND POP30330.SERLTNUM = QTYAVAIL.LOTNUMBR
WHERE POP30300.POPTYPE IN (1,3)
AND POP30300.VOIDSTTS = 0
-- AND POP30300.receiptdate > DATEADD(dd,-35,GETDATE())
AND ISNUMERIC(LOTATRB1) = 1
AND ISNULL(QTYAVAIL,0) <> 0
View 20 Replies
View Related
Sep 24, 2007
Hi,
Can you get grand totals row in sql?
I want to add val column to a grant total, Time1 to a grand total and time2 to a grand total in table below. How to do this please?
PVal TIME1TIME2
p101900-01-01 00:49:59.0001900-01-01 00:00:00.000
p2221941900-01-01 06:33:13.0001900-01-01 00:26:55.000
p3229741900-01-01 06:33:13.0001900-01-01 00:52:39.000
Thank you!
View 1 Replies
View Related
Sep 7, 2007
We have a report that includes a list that expands down to 17 inches to accomodate two pages for a report and this list is grouped on a particular location. Each report is grouped by State. So in each state there can be many locations that report various items that comprimse two pages.
Now, what we need is a "state grand total" page and I am wondering about the best way to go about doing this. We do not want to create a new report with a separate stored proc that returns grand totals. What we would like is to do a running total or something like that. I could then include this on a subreport, but I need it to be the last page. For some reason, I thought there was a Report Footer section, but I only see Page Footer.
I hope I made myself clear enough and not being too confusing and I many thanks for any helpful information.
View 1 Replies
View Related
Aug 3, 2015
I have a calculated measure. On a particular dimension I want to hide the grand total. for remaining dimension grad totals to be visible. Like the below screen shot ....
View 4 Replies
View Related
Jun 8, 2007
I have a table with amount columns and I want the amount column to either insert the value from the database or a zero based on a condition.
For the table rows I use the following to find the amount:
=iif( Fields!TYPE.value="Material" or Fields!TYPE.value="Other", FIELDS.Amount.Value,0)
which works fine. However, when I try to Sum in the group foot I get #Error when I use
=sum(iif( Fields!TYPE.value="Material" or Fields!TYPE.value="Other", FIELDS.Amount.Value,0) )
for the groupings that have a type other than Material and Other. For some reason, it doesn't total the amounts of Material and Other with the Zeroes that were placed in the table rows based on the Condition.
For example, the subtotal errors out when trying to total Material with Labor but if it was just Material and Other, it works.
Example of what the Columns are:
job, year, month, type, amount
s57, 2007, 2, labor, 0
s57, 2007, 2, material, 500
month total errors out
year total errors out
job total errors out
Any help would be appreciated.
View 12 Replies
View Related
Nov 12, 2015
My Power view reports do not show the grand totals correctly. I think my issue relates perfectly to [URL]. However we have updated service pack 2 on both the sql data warehouse and the ssas box. They are 2012. However the power view is still incorrect. Pivot tables seem to work just fine. In AS I have a 2 separate measure groups that has a total count. I then use mdx to bring those two together. Something I have done many times in past with as 2008. My mdx looks like this below. I then hide Total Count EC (from measure group 1) and Total Count SF (from measure group 2). This way I have 1 total count value and they can use another dimension to see the two separate if needed.Â
CREATE
MEMBERCURRENTCUBE.MEASURES.[Total
Count New] AS
//
([Measures].[Total Count] + [Measures].[Total Count SF]),
DISPLAY_FOLDER
=
'Totals',Â
ASSOCIATED_MEASURE_GROUP=
'Report',
FORMAT_STRING
=
"#,#0",
VISIBLE=
1;
The measure Total Count EC works just fine but the Total Count (MDX) does not . All in Power Pivot works fine but in Power View the grand totals are not correct.
View 3 Replies
View Related
Oct 18, 2007
Hello All,
I've created a report that has a count of dates reports. Every company has at least one date report. I've group the report by company and did a count this works find. Now I want to SUM up this field and put it at the end of the report.
I've used =sum(reportitems!textbox10.value) but it only works at the page footer. And only give me a grand total for that page. I want a grand total for the whole report. Is there a report footer???
Thanks
Set_Shot_Dave
View 2 Replies
View Related
Dec 12, 2003
I need to get the Grand Total of the results of this query.
The query pulls the total customer quotes for each community in a management company and loads my DataGrid:
This query works fine for individual community totals"SELECT TOP 100 PERCENT vcName, COUNT(DISTINCT vcCustId) AS " & _
" Total FROM dbo.PropReportData WHERE cManagementCo = '" & Session("MgmtCo") & "' and " & _
" (vcEntryDate >= CONVERT(DATETIME, '" & StartDate & "', 102)) AND " & _
"(vcEntryDate <= CONVERT(DATETIME, '" & EndDate & " 11:59:59 PM" & "' , 102))GROUP BY vcName ORDER by vcName"
At first glance you would think that the following query would return the Grand Total for all communities in the management company:
Current Grand Total Query"SELECT COUNT(DISTINCT vcCustID) As gTotal FROM PropReportData WHERE
cManagementCo = '" & Session("MgmtCo") & "' AND vcEntryDate >= '" & Session
("StartDate") & "' AND vcEntryDate <= '" & Session("EndDate") & " 11:59:59 PM' "
But here's the problem. If there are multiple customer quotes created for different communites, then the customer(vcCustID) is only counted once in the Grand Total Query because I have to use DISTINCT, which of course only picks up one instance of the customer.
Thanks in advance.
View 2 Replies
View Related
Jan 18, 2007
I have two subreports (Revenue and Expense) that each have subtotals.
This works just fine, but I need a Grand Total that would sum the two subtotals.
How would I go about doing this?
So it looks something like this:
Revenue Report (matrix)
Subtotal
Expense Report (matrix)
Subtotal
<~~~~ Need Grand Total here.
View 18 Replies
View Related
Mar 6, 2007
Hi All,
My doubt is, how to get gand total in SQL Reporting Services2005 for the following scenario?
Sample report content:
CustomerId Product Name Price
123 Apple $100.00
Orange $77.00
SUB TOTAL $177.00
124 Apple $105.00
Orange $70.00
Olive $450.00
SUB TOTAL $625.00 // sum(Fields!Price)
GRAND TOTAL $802.00 //How to get Grand total? please..
Regards,
Pragash
View 6 Replies
View Related
Aug 5, 2007
Hi,
I am trying to calculate grand totals in the table footer area on a single table report. The report table has a grouping with a filter. I want the grand total to sum the visible grouping data but instead it sums the entire dataset. I've tried summing the textbox but RS does not allow that from the footer. I've tried specified the group for the scope but apparently RS scope works outward not inward in regards to groups. A simple example of my problem might be a list of bank accounts whose balance is overdrawn. In the report you want to show only the accounts whose balance has gone negative and all the transactions for those accounts. You can create a group on the account field and then a filter on the group to sum the transaction amount and filter out the accounts whose sum is not below zero. The grand total would supposedly sum the accounts whose balance is negative. Unfortunately the sum is on the entire dataset and therefore includes accounts with good balances. I'm sure some will suggest changing the SQL but that is not an option for me. These seems like a very basic operation for a report writer so I'm guessing there is some easy way to do this that has eluded me. Thanks for any help.
View 15 Replies
View Related
Apr 25, 2014
How to calculate grand total in sql server using pivot?
View 1 Replies
View Related
Apr 20, 2007
Hi,
Im using Access and have created a query which adds up the grand totals of clients orders. However i want to be able to add up what each client has spent in total over any given time period. Basically in SQL logic terms:
take all order totals from same client and add together order totals to produce a grand client spend total.
Anyone help!?
thanks
View 3 Replies
View Related
Jun 12, 2007
how to add group subtotal and grand total in report? i try to add formula Sum(Field!Net_Weight.Value) in group footer and unable repeat footer on each page, it return same total on every pages. I hope to get subtotal on each page by group. the expected result would be like this:
Page1
1.Group 1
Date
D/no
Net Weight
6/1/2007
A00000100
10.45
6/1/2007
A00000101
10.95
6/1/2007
A00000102
11.45
6/1/2007
A00000103
11.95
6/1/2007
A00000104
12.45
6/1/2007
A00000105
12.95
Subtotal
70.2
Page 2
Date
D/no
Net Weight
6/1/2007
A00000100
20.15
6/1/2007
A00000101
20.25
6/1/2007
A00000102
20.35
6/1/2007
A00000103
20.45
6/1/2007
A00000104
12.45
6/1/2007
A00000105
12.95
Subtotal
106.6
Grand Total=
176.8
2.Group 2
Date
D/no
Net Weight
6/1/2007
A00000100
10.45
6/1/2007
A00000101
10.95
6/1/2007
A00000102
11.45
6/1/2007
A00000103
11.95
6/1/2007
A00000104
12
6/1/2007
A00000105
12.95
Subtotal
69.75
anybody know how to do it?
View 3 Replies
View Related
Oct 19, 2007
Hi All,
I have to create a table like this using SSRS.
LoanStatus NoOfLoans Amouunt Percentage
Started
1,000
1,000,000.00
100%
Sent to Partner
350
350,000.00
35%
Denied by Partner
50
50,000.00
5%
Accepted by Partner
300
30,000.00
30%
Loan Apps Pnd Disb
10
100,000.00
1%
Loan Apps Disbursed
290
290,000.00
29%
Table is grouped by loan status.
Percentage is calculate as NoOfLoans/TotalNoOfLoans.
Please can anyone tell me how to calculate the grand total and Percentages?
View 5 Replies
View Related
Nov 9, 2013
I've been messing around with ROLLUP but have got nowhere,I have this:
DECLARE @sql NVARCHAR(MAX)
DECLARE @pivotsql VARCHAR(MAX)
DECLARE @columns VARCHAR(MAX)
DECLARE @selectlist VARCHAR(MAX)
[code]...
which works a treat - I just need a grand total at the bottom for each column.
View 7 Replies
View Related
Jul 23, 2015
I have a requirement where I need to show the maximum value in grand totals but for the dimension members the same measure has to sum.
For ex: lets say I have a measure called Test and this is a base measure. The aggregation type set  to this is SUM.
For this same measure the grand totals should not show the sum instead it should show the maximum value of the dimension members which is being analyzed across.
View 4 Replies
View Related
Oct 9, 2015
I have a SP that will generate a pivot output. I want to add a grand total at the end row to sum up the counts for each column.
the SP is as below :
/* COLUMN HEADERS*/
DECLARE
@columnHeaders NVARCHAR (MAX)
SELECT
@columnHeaders = COALESCE ( (@columnHeaders) + ',[' + [Date] + ']', '[' + [Date] + ']')
[code]....
I am getting the below error:
Invalid column name 'Grand Total'.
Msg 205, Level 16, State 1, Line 16
All queries combined using a UNION, INTERSECT or EXCEPT operator must have an equal number of expressions in their target lists.
View 10 Replies
View Related
May 19, 2008
My FactEmployeeTable showing 13 rows of data related to employees, but i used a bridge table for connecting project and employee dimensions. In the ProjEmpBridge table i mapped only 6 employees data to the proj's data. When dragging projet name and employee name it is showing data related to 6 employees but grand total showing 13 as the result. I dont know why it is showing 13 instead of 6. Can anyone please solve this issue.
View 10 Replies
View Related
Sep 10, 2007
Hi There i have a Report That Display's data in following format
Areas
Code | Descirption | Emirates | GCC | ASIAN | OTHER ARABS | so on..
1 What ever 3 0 2 1
2 ABC 0 0 1 0
-------------------------------------------------------------------------------------------
Total 3 0 3 1
The Areas are Matric Columns and are dynamically generated .
i dont want sub total of each row , but i want Grand total at the end of the all columns generated by matrix
I have no clue how do to it
Kind Regards
View 7 Replies
View Related
Jan 15, 2008
Hi,
Hi All,
I am having some trouble getting a Grand Total column at the end of my matrix report (not row at the bottom), such as you get by default in an Excel pivot table.
I have managed so far to add another column that sums up all values across the data range for a particular product code. My intention was to hide all but the last (I did something similar on rows). However you cannot use an expression on the width property for columns, so this will not work.
My report is very standard:
Year
Month (grouped by year)
Product code | Description [qty]
I want a column that displays the total qty across all dates for each row. Surely this is possible?
Any suggestions would be appreciated! Thanks.
View 6 Replies
View Related
May 9, 2007
Hello,
I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of pulications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
--------------
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
View 1 Replies
View Related
May 10, 2007
Hello,
I am using SQL Server 2005. I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of publications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
View 2 Replies
View Related
Sep 7, 2007
Hello Guys,
I am working on a matrix report which has several row groups and 1 column group. After execution, the column group wil end up with several columns containg numeric counts. I would like to have the grand total for each "column group" column as a last row on this report.
For row groups you can just right click "Subtotal", but that is not possible for column group. Could someone please help me to find a clever way of accomplishing this, please. Thank you so much for your help!
View 7 Replies
View Related
May 22, 2008
HI,
In my cube I have defined a role where thet user can only browse certain dimention value. BUt in grand Total the result showing is for all the diemnsion values.
for example The user restricted to browse only Australia and UK Country , But in grand total its showing the SUM of all the country.
Any help will be appreciated.
Thanks
View 3 Replies
View Related
Jul 16, 2015
I have a script that produce a result set that is almost complete. I have a new requirement come up to put a Total at the button of the result set of my Query.
I'm using SQL Server 2008
;WITH CTE AS
(
SELECT
Case WHen left(MONTHDate,3)='Jan' Then '01'
WHen left(MONTHDate,3)='Feb' Then '02'
WHen left(MONTHDate,3)='Mar' Then '03'
WHen left(MONTHDate,3)='Apr' Then '04'
WHen left(MONTHDate,3)='May' Then '05'
[code]....
View 4 Replies
View Related
Nov 18, 2015
I've created a measure counting instances of unique identifiers utilizing the following formula. However, the Grand Total does not equal the sum of the sub-totals.Â
=CALCULATE(COUNTROWS(DISTINCT('Rawdata File'[Identifier])),ALL('Rawdata File'[Identifier]))
View 8 Replies
View Related
Mar 1, 2004
G'Day all,
I am having trouble with a calculation that on the surface seems to be working until it is opened up in excel.
The measure calculates the Actual Value as of last year and is as follows - ([Measures].[Act Val],ParallelPeriod([Time].[Year],1))
This works fine until I look at the totals within EXCEL 2002/2003
1)If I choose to view a whole year then the total shows me a whole year. That is fine and as expected.
2)If I choose part of the year the total shows me the whole year. This is wrong and am wondering if it is an Excel probem or my calculation? But here is the weird part -
3)If I choose another year and select the same months as I have already chosen (ie Year 20023 Jan, Feb and Year 2003 Jan and Feb) then the total for the year that is already selected works!!(shows only the total of the two months - whereas the extra year I have selected (remember - Jan Feb only) shows me a total for the whole year.
WAIT - There's more
4)If I add another month to the 2002 selection (ie add March) then the total for 2003 (Jan Feb only) includes the March value also (even though it is not selected)!!!!!!
Any Ideas??
Does it make sense??
Thanks
Matt
View 3 Replies
View Related
