Why is it that when you want to add a user or a group to SSRS through either Management Studio or the Reports Manager, you have no people picker to lookup into Active Directory.
You can pull up AD users and computers in MMC and do a search and then put their account name in - but that seems like a huge pain.
Am I missing something here - or did Microsoft miss something really big here.
I have a date range parameters in my report, and when viewing it using IE and Firefox ReportViewer, the date picker is there. But when I tried running it using Chrome, the date picker was missing. I tried double click on the date field itself but nothing.
My Chrome version is 17.0.963.79 m. I tried allowing the pop-up blocker but still nothing.
I defined my input parameter as date/time but it doesn't have a time picker where we can accept user input.
The calendar is great but time picker is missing.
Is there any add-in or tweaks I can use to get that feature ?
The alternative solution which uses drop down with some preset values are not feasible for me. All I need is just the time picker similar to adjust time in Windows.
Books online talk about a report manager page to monitor and administrator running job, subscriptions etc...
But I use Reporting Servcies in sharepoint administration mode? Where do I go to see something similiar?
Thanks
SSRS Date Picker is not working in Google Chrome, it works in both IE and Firefox.
View 3 Replies View RelatedWhen I am trying to insert to data from SQL ssis package to SharePoint list people or group column I am getting below error.[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SharePoint List Destination" (25) failed with error code 0x80131500 while processing input "Component Input" (34). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
View 8 Replies View Related
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets?
Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
Thanks to anyone who can help.
-- Mark
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
dispaly(ID, NAME_AR, JobTitle_AR)
Hint:this done pragmatically
how to do this in reporting services.
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[code]...
Hi all,
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
How can I solve this problem?
Thank you very much.
Is there any way to get the report toolbar using SOAP Api in SSRS reporting.
View 6 Replies View RelatedWe've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
HI There
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
This is for reporting services 2000 and 2005.
Thanx
Hello.
I've just created a new report and I added a prameter of type "DateTime".
I didn't even used it in the query.
Whan I preview the report I have the small calendar Icon.
after I pick a time from the picker And press "View Report"
I get the error:
"the value provided for the report parameter P1 is not valid for its type"
I'm using RS 2005.
Any body know whats the problem?
Thanks in advance,
Roy.
hi all,
i've just updated my sql server 2005 with sp1 and sp2.
i want my report date format to change according to regional setting, therefore i've set the report property for language as User.Language.
how do i set the report parameter of type datetime to follow the format of regional setting?
my date parameter has default value which i query from a table.
for e.g. if my regional setting is UK and the default date is 9/7/2006, the date picker will display date at 7 september 2006 instead.
please help.... thanks!
I created a report with two parameters, StartDate and EndDate.
They are specified as datetime type.
When I went to the Preview tab, there were date pickers for both values.
After a week or so of using the report, I thought it would be better if I gave the parameters default values. I spent some time reading what others had done in this forum and used the following as the expressions for the parameters:
Code Snippet
=IIF(Weekday(Today()) =1, FormatDateTime(Today(),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(-1),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(-2),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(-3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(-4),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(-5),2), FormatDateTime(Today.AddDays(-6),2)))))))
=IIF(Weekday(Today()) =1, FormatDateTime(Today.AddDays(6),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(5),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(4),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(2),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(1),2), FormatDateTime(Today(),2)))))))
and now, there are no date pickers. I am curious. Why are they gone? Can I get them back and still have my default values?
Thanks,
IanO
Hello.
I've just created a new report and I added a prameter of type "DateTime".
I didn't even used it in the query.
Whan I preview the report I have the small calendar Icon.
after I pick a time from the picker And press "View Report"
I get the error:
"the value provided for the report parameter P1 is not valid for its type"
I'm using RS 2005.
Any body know whats the problem?
Thanks in advance,
Roy.
Oki, I am a newbie so you got to bare with me here.
I am trying to develop a software where I have to input the datetime picker control. What this datetime picker control should allow user is to pick a date and show the data related to that specific date into the datagrid.
For Example.
Database table - Error Codes has a record feild "error_date". When I run the program it shouldn't show anything on the datagrid. I should be choosing the date from the dtp and then click search and it should show me the data onto the datagrid.
Currently the table shows fine on a datagrid when I run the program, it shows the whole list of data into the datagrid but because there is alot of data in it, it takes me atleast 30mins to find something on it. All I want is the data to be filtered by the date and show it to the datagrid.
Could you please kick start me on this?
Many Thanks
Regards
J
I am sure others have ran into this issue.
But I need to have date parameters using the datetime type and I need to be able to pass the correct value to the MDX.
Updated SQL 2005 to SP2 and Reporting Services Date Picker now has dates defaulting to US format (MM/DD/YYYY) instead of our previous English-Australian (DD/MM/YYYY). Both the clients and server are set to English Australian regional settings in the O/S and the reports are composed for English Australian language. Reports have correct format in Visual Studio development and re-deploying them had no effect. Everything was fine under SP1 - not sure what is going on. Any ideas???
View 4 Replies View Relatedhi.
i have created a database with a table called customer. hav a field which displays the date. how can i add a query on the date picker so that when i choose a date on the calendar i can view the customers details. in other display the record by choosing a particular date.
thx.
Im sure we have all seen this error before:
"The value for the report parameter XXX is not valid for its type"
I have a report (RS 2005) that has 2 date parameters, "start" and "end".
My SQL in not very complicated at all, I have a simple WHERE date between @start and @end
But when I go to view the report in VS2005, I get the above error.
I am yet to find a decent fix for this, what is going on? the date I am trying is:
"26/02/2007" now, obviously its trying to us the en-US formatting, but im in Australia, so I want en-AU.
I have changed my report Language setting to be en-AU, my local settings in Region Setting is English (Australia). (BTW, I had to change the Language setting in my report through the XML, is there a better way to do this?)
How do I fix this?? I have searched an searched but no-one seems to be able to give a clear answer as to what is going on....
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
* Running SSRS config tool (several times)
* Running with/without the IIS Server Role
* Dropping & recreating the SSRS keys
* Recreating the ReportServer database, etc
* Checking all of the accounts, permissions, etc
* Running SQL Repair
* Going through the registry to fix any references to the machine's old name
* Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension..
Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT
{ [Time].[Month].&[2006-09-01T00:00:00] ,
[Time].[Month].&[2006-10-01T00:00:00],
[Time].[Month].&[2006-11-01T00:00:00],
[Time].[Month].&[2006-12-01T00:00:00]
} on COLUMNS,
{
[Measures].[Unique Users],
[Measures].[UU Pct 1],
[Measures].[UU Pct 2],
} ON ROWS
FROM [Cube]
Any ideas?
Thanks,
Arjun
Hi,
I installed SQL SP2 and now the datepicker on the reporting server is formatting the dates in US format regardless of what regional settings are stored on the client.
The version of sql server 2005 is..
Microsoft SQL Server 2005 - 9.00.3054.00 (Intel X86) Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Anyone know how to fix this?
Thanks
Niall
I read a lot of posts in this forum, but none of them provide a solution.
Probably it is related to SP2 as many report, I have SP2 as well...
A funny situation:
I have a report parameter @date, datatype datetime, so I can use the datepicker control.
But, even when not using this @date parameter in my dataset, I still get the error:
The value provided for the report parameter 'date' is not valid for its type. (rsReportParameterTypeMismatch)
Of course it has to do with regional settings and languages etc... But at my international client's site, workstations are in any regional setting and servers are in en-US, nothing I can do about that.
Come'on Microsoft, don't tell us this datePicker is only for the US market?
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side.
My sample report has few parameters that must be passed so I pass these parameters with code.
<My code>
ReportServiceExecution.ReportExecutionService rs = new ReportServiceExecution.ReportExecutionService();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
string extension, mimeType, encoding;
ReportServiceExecution.Warning[] warnings;
string[] streamID;
ParameterValue[] parameters = new ParameterValue[2];
parameters[0] = new ParameterValue();
parameters[0].Name = "pID";
parameters[0].Value = "6548747";
parameters[1] = new ParameterValue();
parameters[1].Name = "pClass";
parameters[1].Value = "8";
ExecutionHeader header = new ExecutionHeader();
ExecutionInfo executionInfo = rs.LoadReport(reportPayslip.Name, null);
executionInfo = rs.SetExecutionParameters(parameters, "en-us");
rs.ExecutionHeaderValue = header;
rs.ExecutionHeaderValue.ExecutionID = executionInfo.ExecutionID;
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID);
</My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error>
"This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value."
</Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
Any help would be much appreciated.
Hi,
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value.
1. In sql we have a like key word to query . for example select * from product where product like "AA%".
what is equavalent mdx query to get such results ?
2.How to impliment the multivalue parameters without using dropdown box?