Hi
1: I€™m trying to get a percentage value (Left to Target) but I€™m getting €œ#Error€? in the Preview.
This is what I have:
=IIF(Fields!SalesTarget.Value Is Nothing , 0, ((Fields!Rev.Value)-(Fields!SalesTarget.Value))/(Fields!SalesTarget.Value))
How can this not work?
I looked at a previous thread in here but I couldn€™t get anything from there L
Kind Regards
I'm embarassed I haven't figured this out already but here goes.
Lets say you need a percentage from dividing two integers for example
"select 2000/4000"
This will produce a zero and I'm assuming that is because of the datatypes involved (the values are coming from columns where the datatype is int)
I've tried converting the values to decimal types but I keep getting overflow erros unless I use very small values.
As always, thanks VERY MUCH for the kind advice.
I have four sum statements in a procedure and I want to add two more fields that divide thismonthdeclines / thismonthsales, and prevmonthdeclines / premonthsales. I have tried a few ways and I just cant get the syntax right. Can someone help..
ALTER PROCEDURE dbo.sp_MTD_Declines
(@prevMonthStart datetime, @prevMonthEnd datetime, @thisMonthStart datetime, @thisMonthEnd datetime)
as
select
sum(case when O.orderdate between @prevMonthStart and @prevMonthEnd then D.orderlinetotal else 0 end ) as PrevMonthSales,
sum(case when O.orderdate between @thisMonthStart and @thisMonthEnd then D.orderlinetotal else 0 end ) as ThisMonthSales,
sum(case when O.orderdate between @prevMonthStart and @prevMonthEnd then case when O.orderstatus = 'CC Declined' then O.ordertotal end else 0 end) as PrevMonthDeclines,
sum(case when O.orderdate between @thisMonthStart and @thisMonthEnd then case when O.orderstatus = 'CC Declined' then O.ordertotal end else 0 end) as ThisMonthDeclines
from exigo_data_sync.Orders O INNER JOIN
exigo_data_sync.OrderDetail D ON O.OrderID = D.OrderID
where O.orderdate >= @prevMonthStart
I'm sorry if someone has already posted this but I've looked through a few pages to see if someone had already posted and I couldn't find anything. Anyways, I have two counts and I would like to divide them to get a percentage. Basically I would like to see a percentage of how many tickets are overdue. Here's my SQL:
select count(*)[No. of Tickets Overdue],
case
when sum(datepart(dd,getdate() - j.report_date))>= pt.due_hours then 'Over Due'
when sum(datepart(dd,getdate() - j.report_date))>= pt.due_hours then 'Over Due'
when sum(datepart(dd,getdate() - j.report_date))>= pt.due_hours then 'Over Due'
when sum(datepart(dd,getdate() - j.report_date))>= pt.due_hours then 'Over Due'
end [Ticket Status]
from whd.priority_type pt
inner join whd.job_ticket j on pt.priority_type_id = j.priority_type_id
where j.status_type_id = '1' and j.deleted = '0' and not j.priority_type_id = '5' and not j.priority_type_id = '6'
group by pt.due_hours
order by pt.due_hours desc
COMPUTE SUM(count(*))
select count(*)[Count2]
from whd.job_ticket jt
where jt.status_type_id = '1' and jt.deleted = '0'-- and not jt.priority_type_id = '5' and not jt.priority_type_id = '6'
--COMPUTE [No. of Tickets Overdue]/[Count2]
I know this isn't correct but basically the commented line at the bottom is what I want to do. I've only been doing SQL statements for a few months now, so I know its novice but any help is appreciated.
Thanks in advance.
Hello,
I am trying to take my result set and dividing up the results into 4 equal
groups
I have included my code and a partial result set.
All of your input and help is appreciated as I am new at this
select accounts.id, sum(trans.amount) as 'income'
from jom.dbo.accounts
join jom.dbo.trans
on trans.accounts_id = accounts.id
where trans.amount > 0
group by accounts.id
id income
471098.00
471108.00
4711112.00
4711216.00
4712516.00
4712610.00
471278.00
4712816.00
4712942.99
47142139.00
471438.00
4714452.00
471455.00
47159625.94
4716075.00
471618.00
471628.00
4717625.00
4717720.00
4717816.00
4717928.00
4719274.94
47193248.00
47194176.00
4719539.99
4719616.00
4720916.00
4721046.00
47211177.00
472128.00
4722644.00
47227178.99
4722824.97
4722927.00
4724216.00
4724324.00
472448.00
4724549.00
4724670.00
4725919.95
4726010.00
4726122.00
4726240.00
472768.00
4727768.00
472788.00
472798.00
4729316.00
4729456.00
4729510.00
4729663.00
4730934.00
4731126.00
4731218.00
4732624.00
4732716.00
47328215.00
473298.00
4734319.95
4734419.95
4734519.95
4734642.00
4735962.00
4736016.00
4736175.00
4736240.00
473638.00
4737619.95
4737719.95
4737824.00
4737913.00
473938.00
4739498.95
4739563.95
4739625.95
4741021.00
4741147.00
47412229.00
474138.00
4742618.00
474278.00
4742860.00
4742944.95
4744393.00
4744420.00
4744510.00
4744618.00
4746028.00
4746116.00
4746232.00
4746348.00
4747622.00
47477110.00
4747816.00
4747936.00
474808.00
4749398.95
4749460.00
4749524.00
4749698.00
How do I divide these two case statements:
1. sum(CASE WHEN o.sap_apc_indic is null THEN wip.wip_oth_exp_amt
ELSE 0
END) Markup,
2. sum(CASE WHEN o.sap_apc_indic is not null THEN wip.wip_oth_exp_amt
ELSE 0
END) AP,
Hi, I am completly new in ASP , but, due the necessity of the production in the company I work, I need
urgently to learn do deal with scripts and SQL.
I did a script that shows on the production screen the consume tax of the gas instantly on time and it
worked. Now I have to do a table formed by the DIVISION of a valor V from one table by the valor V in
another table, mas the values must be taken at the same time do give me the gas consumed by ton produced.
Explaining in details:
I have two tabels:
1 - PDE#HD#Consumption#RP_Consumption_Gas
2 - PDE#HD#SpeedCurves#Productivity
Inside each of these tables, there are two columms with the same name for both -> V, T. The V columm of the
table PDE#HD#Consumption#RP_Consumption_Gas gives me the cas consumed and the V table of
PDE#HD#SpeedCurves#Productivity the productivity. The V1/V2 graph must be ploted in a 24 hours period. What
happens is that if I do it for 24 houres, I mean, 1 day, the graph is ploted completly wrong in time! If I
do the same thing, but using only one columm, not the division by another, it works! Why this is happening ?
What is wrong with the following script ?? I need to know the answer for this as fast as possible! If you
need more details, I will give.
The script:
DayForm = Request.Form("D1")
Dim hoje
Dim dia
If DayForm = "" OR DayForm = 0 Then hoje = true
If hoje Then _
Set rs = conn.Execute("SELECT
convert(varchar,PDE#HD#Consumption#RP_Consumption_Gas.T,108),(PDE#HD#Consumption
#RP_Consumption_Gas.V/PDE#HD#SpeedCurves#Productivity.V) As Consumo FROM
PDE#HD#Consumption#RP_Consumption_Gas INNER JOIN PDE#HD#SpeedCurves#Productivity ON
PDE#HD#Consumption#RP_Consumption_Gas.T = PDE#HD#SpeedCurves#Productivity.T WHERE
PDE#HD#Consumption#RP_Consumption_Gas.T > DATEADD(dd, -1, GetDate()) ORDER BY
PDE#HD#Consumption#RP_Consumption_Gas.T") _
Else _
Set rs = conn.Execute("SELECT
convert(varchar,PDE#HD#Consumption#RP_Consumption_Gas.T,108),(PDE#HD#Consumption
#RP_Consumption_Gas.V/PDE#HD#SpeedCurves#Productivity.V) As Consumo FROM
PDE#HD#Consumption#RP_Consumption_Gas INNER JOIN PDE#HD#SpeedCurves#Productivity ON
PDE#HD#Consumption#RP_Consumption_Gas.T = PDE#HD#SpeedCurves#Productivity.T WHERE
PDE#HD#Consumption#RP_Consumption_Gas.T > convert(date, DATEADD(dd, " & DayForm & ", GetDate())) AND
PDE#HD#Consumption#RP_Consumption_Gas.T < convert(date, DATEADD(dd, " & DayForm+1 & ", GetDate())) ORDER BY
PDE#HD#Consumption#RP_Consumption_Gas.T ")
Just a quick question, how do I divide the results of these two queriestogether ?(select count (*) as ontime from schedule where actualarrivaldate <=estimatearrivaldate)(select count (*) as total from schedule)Thanks for any helpRobert
View 2 Replies View RelatedI want to divide the subtotal of a matrix. Can I do ?
View 1 Replies View RelatedSQL Server (TSQL) how to divide a number by either 2,3,4, or 6 and spreading it across that number of rows depending on what we are dividing the number by where it comes back to the original number...That is confusing I know so let me break it down...
Bill for 143.23 that will be paid out through 2 months...When you divide that by 2, you come back with 71.62, but if you multiply that number by 2, you come back with 143.24, not the amount for the bill...the end result has to be 71.62 for month1 and 71.61 for month2...Basically when there is a remainder, that has to be applied to the first month...
143.23:
Month1 = 71.62
Month2 = 71.61
Another example...Same amount but have to divide by 6
143.23
Month1 = 23.88
Month2 = 23.87
Month3 = 23.87
Month4 = 23.87
Month5 = 23.87
Month6 = 23.87
Hello,
I want to process a row from a source table by dividing the sales amount in that row over the period of the sale by month.
For instance if an item is sold for 500$ and it's duration is 5 months from 1/15/2004 till 6/15/2004, I want to divide the sale amount by month as follows:
Month 1: 50$
Month 2: 100$
Month 3: 100$
Month 4: 100$
Month 5: 100$
Month 6: 50$
I know I can create a script component and do the calculation for each month and insert 6 records in the fact table for each row in the source table, where each record holds the amount for the corresponding month. However I was wondering if there is another technique that utilizes the components of SSIS to do it more efficiently.
Thanks,
Grace
Hello!
I have a table that contains a field containing the total bytes for a file. I am displaying the information in a datagrid but need to display the information in MB. If I divide by 1,000,000 in my select statement as such:SELECT cs_fileSize / 1000000 AS MB, cs_fileSize
FROM t_client_spotsI get the following results:
MB | cs_filesize
1 | 1899602
1 | 1782281
I would like the results to be:
MB | cs_filesize
1.89 | 1899602
1.78 | 1782281
Any suggestions?
Thanks in advance!!
I have two fields - both defined as money.
When I divide them, SQL Server truncates the result after the 4th decimal point.
So SQL Server says: 370.45 / 3,391,517.85 = 0.0001
I want to achieve: 370.45 / 3,391,517.85 = 0.00010922837... etc.
The field the result is going into is defined as decimal(20,18)
I've tried using "cast(1stmoneyfield as decimal(20,18)) / cast(2ndmoneyfield as decimal(20,18)) as dividednumber", but SQL Server reports back errors about null values and Arithmetic overflow and terminates.
I'm at a loss as to how to solve the problem. Any suggestions please?
I was given the task to come up with a result set based on certain criteria:
Please add one row for each offer code
1) Opt-in rate by offer code: This can be calculated by dividing XXX Inventory with lead / XXX Inventory (A)
The report should read something like below:
Example result set:
Log Date: OfferLetter OfferCode DailyCount
2014-07-20 A XXX Inventory (A) 108
2014-07-20 A XXX Inventory with lead 54
2014-07-20 A XXX Inventory Opt-in Rate: 50%
There are 12 different groupings and OfferLetter A is just one of them.
Below is the code that is written to date:
DECLARE @Start datetime = DATEADD(day, DATEDIFF(day, 0, GETDATE() - 8), 0)
DECLARE @End datetime = DATEADD(day, DATEDIFF(day, 0, GETDATE() - 1) + 1, 0)
DECLARE @Today datetime = DATEADD(day, DATEDIFF(day, 0, GETDATE() - 1), 0);
SELECTDT.OfferCode, DT.OfferCodeDesc
INTO#tempOfferCodes
[Code] ....
The issue I'm having is that the values I need to divide by are in fact, a result set from the CASE statement. It's been a long time since I've done anything like this.
I'm trying to divide two values from separate rows. Each row is a separate UNION statement.
2014-08-03 00:00:00.000NKBB (N) - Total Offers 1218 UNION (A)
2014-08-03 00:00:00.000NKBB (N) - With Lead 301 UNION (B)
2014-08-03 00:00:00.000NKBB (N) - Without Leads 917 UNION (C)
In the below example, I would like to divide KBB (N) - With Lead (UNION (B)/KBB (N) - Total Offers UNION (A)
What would be the best way to accomplish this?
Hi ,
Is there any method by which I can divide the large flat file into certain number of small files keeping the header in each of the sub files?
Regards,
Prash
I have the following query that displays 2 values. I want to add a column with the percentage ([Providers With Security]
/ProviderTotal) * 100
SELECT (SELECT COUNT(DISTINCT NPI) FROM HS140_Rpt_Tmp_ForSummary WHERE Market = s.Market) AS ProviderTotal,COUNT(DISTINCT NPI) AS [Providers With Security]
FROM HS140_Rpt_Tmp_ForSummary s
WHERE s.[Security] = 'Yes'
GROUP BY Market
How can I do this?
Hello
I need a little help.
I'm working on this query but is not returning the value I want
SELECT CONVERT(float, hits)/ abat as 'AVE'
The hit column value is 3 and abat 4 I want to return 750 but so far I'm getting
.75 or if I try decimal returns .7500000000
Thanks
Robert
I need to write a page that figures out the percentage of students passing an assessment item where students are from a particular school, grade, gender, and are not medically exempt.
I did a Count Statement on all test taker, and another Count Statement for the number passing the item who were not exempt. Both of the statements are shown through seperate datalist controls. I then want to get the percentage by dividing the number passed by the number taken and mulitplying that by 100.
Is there a better technique or can I do this in a sql statement somehow?
I am havingSELECT DISTINCT Name, (( count(id_Name) * 100 ) / (SELECT count(id_Name) AS tt FROM dbo.Name)) as PercentageFROM dbo.NameGROUP BY Namebut I get only integers : 1,0,4,12I need : 1.63, 0.4, 4.05, 12.78how can I do it ?is there a better way to calculate a percentage ?thank you
View 5 Replies View RelatedHi i create a temp table that count how many A,B,C and D there where in a table.
I need calculate the percentage.It could be easy put the problem is that i cannot devide by the same number.
Here my temp table DECLARE @Temp table
(
strLastName varchar(50),
strFirstName varchar(50),
strReponse char(10),
strNomObjet nvarchar(200),
strDescripteurOrdre char(10),
strNomDescripteur nvarchar(200),
strObjetOrdre char(10)
)
I want to check how many A there is.
SELECT strNomObjet,strNomDescripteur,count(*) FROM @Temp
WHERE strReponse = 'A'
GROUP BY strNomObjet,strNomDescripteur
This will give me somthing like this
For the first one there 25 A
Second 27 A
NOMBRE ET OPÉRATIONSdémontre une compréhension du concept du nombre25
NOMBRE ET OPÉRATIONSpeut faire les opérations sur les nombres pour résoudre des problèmes27
STATISTIQUES ET PROBABILITÉSpeut suivre les étapes d'une démarche statistique26
RÉGULARITÉS ET RELATIONSutilise des régularités (suites logiques) pour résoudre des problèmes24
RÉGULARITÉS ET RELATIONSutilise des relations mathématiques (algèbre) pour résoudre des problèmes23
FORMES ET ESPACE (géométrie)utilise la mesure pour résoudre des problèmes17
FORMES ET ESPACE (géométrie)utilise les figures géométriques pour résoudre des problèmes22
STATISTIQUES ET PROBABILITÉSutilise les probabilités pour résoudre des problèmes27
FORMES ET ESPACE (géométrie)utilise les transformations géométriques pour résoudre des problèmes22
After that i use
SELECT count(*) FROM @Temp
GROUP BY strNomObjet,strNomDescripteur
That will give me how many person have been tested.
It will give me this
36
36
35
36
35
36
36
35
35
So i need to take the first 25
25 / 36 * 100 = 69.4%
27 / 36 * 100 = 75%
26 / 35 * 100 = 74.2%
I hope you understand what i mean!
Any idea?
Tks in advance
Hello!I have a need to create a function that will return a sublist ofelements from a table based on an associated column value and itsranking within the table (based on a percentage range).To expand with a simple example (only 4 elements):Element | Value---------------A102 | 5A506 | 10A322 | 15A342 | 20I would like to be able to return the range of elements that lie in the50-75% value range (e.g. third quartile range). Therefore with onlythese four elements I would want to return the element code 'A322'.I have attempted to achieve this by using SELECT TOP n PERCENT. I canbring back the required range by combining two select percentstatements.SELECT Element from ELEMENT_TABLEWHERE Element IN(SELECT TOP 75 PERCENT Element FROM ELEMENT_TABLE ORDER BY Value)AND Element NOT IN(SELECT TOP 50 PERCENT Element FROM ELEMENT_TABLE ORDER BY Value)The problem is that I cannot seem to pass a variable to this percentageso if I want another percentage range set, I ave to define anotherfunction.My question therefore is does anyone know either(1) a way I can pass a variable (n) to these SELECT n PERCENTstatementsOR(2) an alternative way of doing this?Many thanks!Andrew
View 3 Replies View RelatedHi team, I have a column 'a' of a table in which i would like to calculate a percentge of all entries in that column 'a' and place the results in a column 'c' beside column 'a'. Can this be done in sql server ??
View 5 Replies View RelatedLets say I have a table called ProductProductId Name Price Category1 Table 20.00 Furniture2 Chair3 Lamp Misc What is the SQL command that would give me as a percentage the completeness of a row, either complete or empty?For e.g. SELECT ... FROM Product WHERE ProductId = 2 ; should give a result of 50% as half the Columns in that row are empty.e.g. SELECT ... FROM Product WHERE ProductId = 3 ; should give a result of 25% as 1/4 of the Columns in that row are empty.I tried used something like SELECT COUNT(COLUMN_NAME) AS Expr1FROM INFORMATION_SCHEMA.COLUMNSWHERE (TABLE_NAME = 'Product')but dont know how to go forward.
View 2 Replies View RelatedOk guys, here is my query
GridSqlDataSource1.SelectCommand = "SELECT *, (([WinSum])/(([WinSum]) + ([LossSum]))) AS WinPercent FROM [ResultsView] WHERE ([CDIV] = @CDIV) ORDER BY [CTEAM]"
I need it to give me a 3 decimal percentage for WinPercent, but right now it is giving me 0 because as an example:
6 / 7 = 0 instead of 0.857
Any ideas?
Hello every one, I am trying to get the total percentage of a column
Regions
Workbooks Required
Workbooks Sent
Workbooks Returned
Workbooks Complete
A
20
21
20
18
B
33
33
33
30
C
19
29
18
16
D
9
18
8
8
Totals
Thanks in advance for any tips/solutions.
Hi Guys,
I am in need some uinderstanding of how to return the percentage of calls that were closed, between 1, 2 ,3, 4 and 5 days (possibly extendable to catch all those that were holding on to jobs to make it look like the were busy) as well as including all open jobs.
Because of my newbie status I am stumped at how to even start a query of this magnitude, and no this is not a school assignment :-) just some one who is very new to T-SQL and wanting to learn how to extract data from an MS SQL database server, as I find it fascinating, also my bosses find it fascinating the type of data I am returning for them so far.
So enough waffling.
This query will be run through VBA, any variable(s) will be supplied by VBA.
DB name = Envisage
Table name = HD_Call
Columns = DateRaised (datetime, null), DateCompleted (datetime, null)
Help in understanding how to construct this query will be grately appreciated.
Hi,
easy question for advanced users:
I have a dimension called "Movement rate". The members are "1" to "6".
There is a measure called "No. of Products".
What i easily like to do is showing the percentages "No. of Product" for each "Movement rate" of the amount of "No. of Products" without using the frontend-tool.
Thx in advance for any help.
Andreas
b/w two colums?
i have two numberic columns
i want percentage of column2/column1
They are on separate table.. l am intended to creat view with my results.
thanks
I have requirement in which i need to calculate percentage value based on billamount and concession amount..to calculate the percentage part and show the o/p.
SELECT PP.KID_ID_NO_V,(PP.FIRSTNAME_V + SPACE(1) + PP.LASTNAME_V)AS [PATIENT_NAME],BM.TOTAL_AMOUNT_M AS [BILL_AMOUNT],BM.CONCESSION_AMOUNT_M AS [CONCESSION_AMOUNT],BM.BILL_AMOUNT_M AS [TOTAL_AMOUNT],
FROM BILL_MASTER BM
INNER JOIN PATIENT_PROFILE PP ON BM.PATIENT_ID_N=PP.PATIENT_ID_N
WHERE BM.BILL_SETTLED_C='Y'
[code]....
Hi, Please help.
I need to calculate percentage [COUNT(ALERT_RECEIVED_DATE) FRAUDCT,over SUM(CASE WHEN FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) FRAUDUNWK] I tried my best but I cant come up with the solution.
Please, help.
Thk
SELECT
CONVERT(nvarchar(10),dateadd(d,-day(ALERT_RECEIVED_DATE) + 1,ALERT_RECEIVED_DATE),101) PERIOD,
COUNT(ALERT_RECEIVED_DATE) FRAUDCT,
SUM(CASE WHEN FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) FRAUDUNWK,
SUM(CASE WHEN FRAUD_DECISION ='D' THEN 1 ELSE 0 END) DECLINED,
SUM(CASE WHEN A.FRAUDID IS NOT NULL AND FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) PENDING_EXCEPTION,
SUM(CASE WHEN A.FRAUDID IS NOT NULL AND FRAUD_DECISION='D' THEN 1 ELSE 0 END) DECLINED_EXCEPTION
FROM
TBLFRAUDFINDER O
Hi, Please help.
I need to calculate percentage [COUNT(ALERT_RECEIVED_DATE) FRAUDCT,over SUM(CASE WHEN FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) FRAUDUNWK] I tried my best but I cant come up with the solution.
Please, help.
Thk
SELECT
CONVERT(nvarchar(10),dateadd(d,-day(ALERT_RECEIVED_DATE) + 1,ALERT_RECEIVED_DATE),101) PERIOD,
COUNT(ALERT_RECEIVED_DATE) FRAUDCT,
SUM(CASE WHEN FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) FRAUDUNWK,
SUM(CASE WHEN FRAUD_DECISION ='D' THEN 1 ELSE 0 END) DECLINED,
SUM(CASE WHEN A.FRAUDID IS NOT NULL AND FRAUD_DECISION IS NULL THEN 1 ELSE 0 END) PENDING_EXCEPTION,
SUM(CASE WHEN A.FRAUDID IS NOT NULL AND FRAUD_DECISION='D' THEN 1 ELSE 0 END) DECLINED_EXCEPTION
FROM
TBLFRAUDFINDER O
I am relatively new to SQL i.e. I know the basics!
What I am trying to do is: I have a database of customer spend and I am trying to segment them into certain %ages of the search results. So, for example, find all of the customers that are in the top 10% of spenders (I also want to only select customers with a spend of greater than x!). I am trying to do this using a Case When but feel that I may be out of my depth.
Please help if you can!!
Thanks, Kris