Hi,
I'm using SQL Server Management Studio Express and I have made a website
that uses a database with stored procedures.
When running pages in my webpages it cost around 2 seconds to load each
page.
Thanks too long!! But where is the problem???
I like to see a list of all executed stored procedures with there execute
time (for each page).
In this way I can check if the problem is here.
How can I get a logfile like this?
Thanks!
I have a set of disks allocated for a high performance SQL implementation that will entail lots of large queries. My question is do I allocate more IOPS to the logs or to the database?
For example, if I have a 10 disk RAID 1/0 and a 4 disk RAID 1/0 available, which do I allocate to the logs and which do I allocate to the database? Which will require the most IOPS?
Thanks!
I want to automate the offloading of SQL Server 6.5 logs before they become full. I've set this up 'manually' by triggering a job to run when the LogSpaceUsed threshold of the SQLServerLOg counter exceeds a certain value, but what I want to do now is to automate the starting of this performance counter. Ideally what I'd like is to (1) Start the counter once SQL is up, having (2) first ensured a particular instance of the counter isn't already executing (3) have some means of detecting whether this counter ever stops running in which case we'd have to restart it. This is probably more of an NT question than anything but if anyone has experience of this please let me know....I have tried trying to get SQlServer to start the performance counter as it starts up. I used sp_makestartup to define a stored procedure which runs on startup, this uses xp_cmdshell to call a CMD file which calls the saved counter definition (a .pmw file, performance monitor workspace) I thought this should work but the counter wasn't loaded......this doesn't check whewther an existing version of the counter is already running anyway.
View 3 Replies View RelatedThere are so many to choose from, which ones are the most important to monitor?
Also if you have your data files and trans logs set to grow automaticlly and would like to change this to a fixed number is there a way to determine how large you should set them at? Thanks in advance.
:confused:
OS: Windows 2012 Enterprise
SQL Server: 2012 Enterprise
I was wondering if there is any way all SQL Server error log entries could be automatically written to Windows Event Log.
Hi,
In my case I have to log the errors raised by any task in a package to either windows event log, text file or SQL server. Also I need to send an email notifications to a group of people telling them about the error.
Now can I use SSIS package logging for logging the errors into the required destinations. I mean right clicking on the package and selecting Logging, then adding the required log providers and enabling the events for logging into those. I think I have to upfront select the log providers to log the error, I will not have the liberty to log the error to the destination, the name of which is passed as a variable to the package. This is okay with me though.
Now what will a custom log provider help me to do in this case. Also can I somehow configure my package to call the send mail task everytime an error is raised.
Also, one more option can be developing a package that only does the error handling. It will take in the paramters or the error codes and descriptions, the destination to write to and a flag to send mail or not for that particular type of error.
What do you think? Kindly advise.
Thanks in advance for your help and time.
Regards,
$wapnil
When looking at SQL Server error logs, I noticed that the current error
log had grown to 1MB whereas most of the files are only a few KB.
QUESTION 1: Can I set the max size for an error log file? If so, how?
QUESTION 2: If not, is there a workaround?
Thanks
1. Use mssql server agent service to take the schedule
2. Use a .NET windows service with timers to call SqlClientConnection
above, which way would be faster and get a better performance?
Hello Everyone,I have a very complex performance issue with our production database.Here's the scenario. We have a production webserver server and adevelopment web server. Both are running SQL Server 2000.I encounted various performance issues with the production server with aparticular query. It would take approximately 22 seconds to return 100rows, thats about 0.22 seconds per row. Note: I ran the query in singleuser mode. So I tested the query on the Development server by taking abackup (.dmp) of the database and moving it onto the dev server. I ranthe same query and found that it ran in less than a second.I took a look at the query execution plan and I found that they we'rethe exact same in both cases.Then I took a look at the various index's, and again I found nodifferences in the table indices.If both databases are identical, I'm assumeing that the issue is relatedto some external hardware issue like: disk space, memory etc. Or couldit be OS software related issues, like service packs, SQL Serverconfiguations etc.Here's what I've done to rule out some obvious hardware issues on theprod server:1. Moved all extraneous files to a secondary harddrive to free up spaceon the primary harddrive. There is 55gb's of free space on the disk.2. Applied SQL Server SP4 service packs3. Defragmented the primary harddrive4. Applied all Windows Server 2003 updatesHere is the prod servers system specs:2x Intel Xeon 2.67GHZTotal Physical Memory 2GB, Available Physical Memory 815MBWindows Server 2003 SE /w SP1Here is the dev serers system specs:2x Intel Xeon 2.80GHz2GB DDR2-SDRAMWindows Server 2003 SE /w SP1I'm not sure what else to do, the query performance is an order ofmagnitude difference and I can't explain it. To me its is a hardware oroperating system related issue.Any Ideas would help me greatly!Thanks,Brian T*** Sent via Developersdex http://www.developersdex.com ***
View 2 Replies View RelatedHello Everyone,I have a very complex performance issue with our production database.Here's the scenario. We have a production webserver server and adevelopment web server. Both are running SQL Server 2000.I encounted various performance issues with the production server witha particular query. It would take approximately 22 seconds to return100 rows, thats about 0.22 seconds per row. Note: I ran the query insingle user mode. So I tested the query on the Development server bytaking a backup (.dmp) of the database and moving it onto the devserver. I ran the same query and found that it ran in less than asecond.I took a look at the query execution plan and I found that they we'rethe exact same in both cases.Then I took a look at the various index's, and again I found nodifferences in the table indices.If both databases are identical, I'm assumeing that the issue isrelated to some external hardware issue like: disk space, memory etc.Or could it be OS software related issues, like service packs, SQLServer configuations etc.Here's what I've done to rule out some obvious hardware issues on theprod server:1. Moved all extraneous files to a secondary harddrive to free up spaceon the primary harddrive. There is 55gb's of free space on the disk.2. Applied SQL Server SP4 service packs3. Defragmented the primary harddrive4. Applied all Windows Server 2003 updatesHere is the prod servers system specs:2x Intel Xeon 2.67GHZTotal Physical Memory 2GB, Available Physical Memory 815MBWindows Server 2003 SE /w SP1Here is the dev serers system specs:2x Intel Xeon 2.80GHz2GB DDR2-SDRAMWindows Server 2003 SE /w SP1I'm not sure what else to do, the query performance is an order ofmagnitude difference and I can't explain it. To me its is a hardware oroperating systemrelated issue.Any Ideas would help me greatly!Thanks,Brian T
View 2 Replies View Relatedthe logs on our database keep locking up and return and file size of 0. Does any know of a way to dump the log file. I tried: Dump Transaction log to .... but it did not want to work any ideas.
View 6 Replies View RelatedI'm running a SQL Server 2005 Express installation.
Now I notice that the SQL Server logs (under Management in Mgmt Studio Express) are
empty - no logs are in there, neither under Current, nor under the "archived".
Do I have to switch on logging explicitly??
(I'm logging on as "sa".)
What is the best way to clear the transaction logs. My backup job each night is ending because it says it is running out of disk space and I need to clear up the transaction logs. Any help is appreciated. I see many different options (trucate option, auto shrink, etc.), just need some assistance tosome more specific best approaches. Thanks
View 3 Replies View RelatedScenario:
I have August22 full backup and August22 and August23 transactions log backups . I want to get the August23 and August23 full backup. So I performed a restore backup with August22 full backup and all the August22 trn backups. Then I backed up giving it August23 name and repeated the process with the August23 trn backups. But, I get an error saying that the transactions haven't been rolled foward far enough. But, I am not missing any trns! I will really be grateful if anyone would help.
thanks.
Im having issues truncating my transaction logs. I have logs in excess of 40 gigs. All the info in the BOL is very vague. Any assistance would be apreciated.
Regards
SeTi Ni
When we backup the transaction log,will it truncate the log or it will grow from there?Truncate log on check point is desabled.
Thanks!
Currently, my client is allowing all the developers to log in as sa and most servers have a NULL sa password. Not a good idea. I am recommending them to move to integrated security with NT groups and to move away from using the sa login altogether. Then to secure the sa login, actually give it a password (something cryptic). I also wanted to set up an alert whenever someone logs in using the sa password. How can that be accomplished? A trigger on the sysprocesses table would work but seems a little risky.
View 8 Replies View RelatedI am currently trying to export from SQL to notes via NotesSQL.I have set up the necessary ODBC data sources & DTS job. I am encountering errors when I attempt to execute the DTS package . I.e "job failed"
- How do I drill down to aquire more detailed error logging on the package to find out exactly what's wrong with DTS?
Thanks
Paul
I've truncated and shrunk the database and now, it says that the size of the db is 14 mb and 8mb is free. However, on the file system, the mdb and
ldb files together adds up to 14 mb. How can I free up the 8 mb for other usage?
Thanks,
Anthony
In Enterprise Manager, Management and then SQL Server Logs, when I clicked on Current or Archive#1 or 2 etc, nothing happens. This has been going on for the past 3 weeks does any one knows what is causing such problems?
View 1 Replies View RelatedWhen I'm in EM, there is one log that when I click on it to view it hangs my EM. All other logs (current and others) I can click and view just fine. I'm on my way out to the server to see the log in the file directory but what could cause this?
Thanks..
to take the transaction log back up regularly I should have truncate log on check point false. If I do so then how will I truncate the log.
regards,
Renu
Is there a way to disable logging ?
I'm about to split a 1000000 rows table into three other tables , and would prefere not to log this action ...
Does anyone know how to do it in a SQL 7.0 statement ?
I am trying to import records via bcp (about 1,500,000 records) and I keep running out of disk space. Is there any way to limit or do away with the transaction log (and still be able to import)?
View 2 Replies View RelatedIs there another way to restart the SQL Error Log without shutting down and restarting the MSSQLserver service?
View 2 Replies View RelatedHelp on Backup of Logs
I get the following errors when I am trying to backup log every 15 minutes. It fails only during the peak hours.Does anyone have any ideas why it happens.
Cannot allow BACKUP LOG because file 'XX_data' has been subjected to nonlogged updates and cannot be rolled forward. Perform a full database, or differential database, backup. [SQLSTATE 42000] (Error 4213) Backup or restore operation terminating abnormally. [SQLSTATE 4200
I want to have the Transaction logs truncate on checkpoint what is the best way to do this, I take a complete backup everynight of the database. Wouldnt this set a checkpoint and clear the logs? If so it doesn't do that for me.
View 3 Replies View Relatedhow do i decrease the transaction log example 500mb to 100mb, can you help me with the syntax pls!!
View 1 Replies View RelatedI need to move transaction logs to a different drive and am looking for a way to do it without detaching the db.
Can I create a second transaction log file for the DB and then delete the original log file?
What is the best way to do this for db's that are being replicated?
Thanks,
Ken Nicholson
Hi, my log has grown out of proportion after performing an indexdefrag in bulk-logged mode!
Now I cant shrink the damn thing coz I have forgotton how to shrink it when the logical log files are still in use.
Can somebody enlighten me please. thankyou.
error msg: "
Cannot shrink log file 2 (MyDatabase_Log) because all logical log files are in use."
Is it normal for database response times to slow down as the transaction log fills up. I have noticed that once it gets above 65% our clients response time through the web slows down? Any suggestions on how to fix this?
View 1 Replies View RelatedIs there any way we can log in the info like this in SQL Server
Who logged in
What date
OS Name
Ipaddress
SQL Login Name
Please share any experience and/or suggestions on moving the T-logs to a separate physical drive. What I have read so far suggests that the best way is to sp_detach, physically copy (not move) the logs, and then sp_attach again.. but some questions are unanswered.
For some reason, everything I've found has you copying both .mdf and .ldf files to the new drive... I guess that was just an oversight on the part of the individuals who wrote the documents.. can't imagine wanting to copy the .mdf files too.
When you sp_attach, must you specify the original location for the .mdf files as well as the new location for the .ldf files? Do you have to go into server properties, Database settings/ and change the location of 'default log directory' manually?
Is there any easier way to move the T-logs?
JJones