Permission Problems With Sp_attach_db During Installation
Sep 26, 2007
I successfully install SQL Express silently.
Then I try the following
-S .INSTANCE -Q "sp_attach_db 'ATTACH_AS_NAME', 'C:Program FilesAPP_NAMESQLDataAPP_DB.MDF'"
This works...sometimes. But Many times I wll get a permissions error on the folder "C:Program FilesAPP_NAME". If I go and give "Everyone" "Full Permission" to the folder...it works fine.
My questions are:
1) What system users need access (and at what level) to this folder to do an attach? Because obviously giving everyone full access is bad.
2) Is there a better method for deploying a populated database with my application that this?
View 9 Replies
ADVERTISEMENT
Apr 18, 2008
I am trying to install SQL Server 2005 Standard Edition in parallel with SQL Server 2000. The server is a Dell 2650 with 1 GB RAM running Windows 2000 Server.
The initial part of the setup runs the System Configuration Checker (SCC), which is generating this warning:
Default Installation Path Permission Requirement (Warning)
The server is a member of a domain, but I am logged in as the local administrator. The drive is not compressed. There are no file system problems. I am at a loss as to why this warning is occuring, and do not want to proceed until I figure this out.
(I got this warning on another server as well. That was a test server, so I proceeded. The engine seems to run ok, but SSIS will not load, says a component is missing. Not sure if the two issues are related or not).
Any ideas?
Thanks,
Mike
View 3 Replies
View Related
Feb 7, 2008
I'll install SQL Server Express SP2 on Vista during my Setup.
But the setup beaks with error 110.
In other articles it sounds like an folder access problem.
On a Custom Action Type 210 i start a application which execute the sqlexpress.exe.
I tried some other codes to impersonate or noImersonate but without success.
But i can not use the unpacked files because size is to large(170MB)
An good Idea would be unpack the setup files during setup to an custom folder with right permissions.
But I dont know how unpack files without GUI (SQLEXPRESS x always show the GUI).
Any Idea???????????
Here are the corresponding logfiles:
------------------------------------------------------------------------------------------------
Core.log
...
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
SCU_SetupMgr::InstallComponent state=INSTALL, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=e:a3d45fa9ced92ee76a8e8275
QuietMode=true
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
<Func Name='SnacComp::InstallImp'>
Failed to install SNAC
Failed to install SNAC : (110) {e:sql9_sp2_tsqlsetupsqlcudllsnaccomp.cpp:251}
SCU_SetupMgr:vc() caught exception: Failed to install SNAC : (110) {e:sql9_sp2_tsqlsetupsqlcudllsnaccomp.cpp:251}. SetupMgr: state=ERROR, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=e:a3d45fa9ced92ee76a8e8275
QuietMode=true
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:520}
<EndFunc Name='UpdateComponents' Return='1603' GetLastError='0'>
Component update returned a fatal error : 110
Error Code: 0x8007006e (110)
Windows Error Text: Das System kann das angegebene Gerät oder die angegebene Datei nicht öffnen.
Source File Name: sqlncli.msi
Compiler Timestamp: Thu Oct 5 12:22:33 2006
Function Name: Unknown
Source Line Number: 1583
Error: Failed to add file :"E:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_DEVELOPMENT-PC_.NET Framework 2.0.log" to cab file : "E:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2008/1/7 8:3:25
Failed to launch Watson with error code : 123
Message pump returning: 110
-----------------------------------------------------------------------------------------------------------------------------------------------
SNAC.log
=== Verbose logging started: 07.02.2008 08:03:24 Build type: SHIP UNICODE 4.00.6000.00 Calling process: E:Windowssystem32msiexec.exe ===
MSI (c) (ACC) [08:03:24:840]: Resetting cached policy values
MSI (c) (ACC) [08:03:24:840]: Machine policy value 'Debug' is 0
MSI (c) (ACC) [08:03:24:840]: ******* RunEngine:
******* Product: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
******* Action:
******* CommandLine: **********
MSI (c) (ACC) [08:03:24:840]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (ACC) [08:03:24:840]: Grabbed execution mutex.
MSI (c) (ACC) [08:03:24:871]: Cloaking enabled.
MSI (c) (ACC) [08:03:24:871]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (ACC) [08:03:24:903]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (E4:98) [08:03:24:918]: Grabbed execution mutex.
MSI (s) (E4:5C) [08:03:24:918]: Resetting cached policy values
MSI (s) (E4:5C) [08:03:24:918]: Machine policy value 'Debug' is 0
MSI (s) (E4:5C) [08:03:24:918]: ******* RunEngine:
******* Product: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
******* Action:
******* CommandLine: **********
MSI (s) (E4:5C) [08:03:24:918]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (E4:5C) [08:03:24:934]: SRSetRestorePoint skipped for this transaction.
MSI (s) (E4:5C) [08:03:24:934]: Note: 1: 1402 2: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer 3: 2
MSI (s) (E4:5C) [08:03:24:934]: Note: 1: 1309 2: 5 3: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
MSI (s) (E4:5C) [08:03:24:949]: MainEngineThread is returning 110
MSI (s) (E4:98) [08:03:24:949]: No System Restore sequence number for this installation.
Das System kann das angegebene Gerät oder die angegebene Datei nicht öffnen.
MSI (c) (ACC) [08:03:24:949]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (ACC) [08:03:24:949]: MainEngineThread is returning 110
=== Verbose logging stopped: 07.02.2008 08:03:24 ===
Regards Sven
View 1 Replies
View Related
May 16, 2000
Can anyone spread any light on the following.
I've created a database of 2 tables which exists over 2 drives. I had a 6 Gig log file on one drive and a 1 Gig log file on the other so I used sp_detach_db to detach it. I then deleted the log files and attempted to sp_attach_db with the following:
"sp_attach_db @dbname =N'cwc_load', @filename1 = N'f:cwc_loadcwc_load_data.mdf', @filename2 = N'e:cwc_loadcwc_load_data2.mdf'"
which are the locations of the .mdf files.
I get the error messages 5105 and 945 (which cannot be tracked down using either the Microsoft site or on-line help) but the messages are "Device Activation error. The physical file name 'F:cwc_loadcwc_load_log.ldf' may be incorrect"
"Database 'cwc_load' cannot be opened because some of the files cannot be activated"
which to me tends to suggest that the database is looking for the log files (now deleted).
I've tried forcing a new log file I created using the same locations for the mdfs. I've tried using create database cwc_load on primary (filename = 'etc) which gives the same error message, please tell me someone out there has a resolution for this.
View 2 Replies
View Related
Aug 6, 2002
As part of moving to SQL2K from SQL7 I'm doing sp_detach_db and sp_attach_db on the source server. For those databases that have multiple .ldf files do I need to add a separate filename= line to the sp_attach_db command for each .ldf, or only reference the original .ldf in a single filename?
Thanks,
AL
P.S. Given that I've done a few databases already, what's the effect of entering only the single filename line if multiple filename lines were required?
View 1 Replies
View Related
Apr 23, 2001
how do i use "sp_attach_db" properly so that i can make a new database with only the .mdf file?
View 2 Replies
View Related
Nov 9, 2000
Does SQL Server Agent need to be running in order to execute the
sp_attach_db stored procedure?
I am getting device activation errors while running this stored procedure.
Is there any other way to attach those files back to the SQL Server.
PLEASE HELP
View 1 Replies
View Related
Nov 15, 2006
I am trying to use sp_attach_db SP.
I have a dadafile and a log file at D:Asset
which I am trying to extract using
EXECUTE sp_attach_db 'Asset',
'D:AssetAsset_data.mdf',
'D:Assetasset_log.ldf'
can any one of u tell where i went wrong
I am getting this errror "Device activation error. The physical file name 'D:AssetaaAsset_data.mdf' may be incorrect."
I am trying to use the database provided from
http://www.trigonblue.com/sp_download.htm#Diagram
to practise stored procedures.
Thanks in advance
View 4 Replies
View Related
Sep 20, 2000
I had a SQL Server falure. I rebiuld Master and tried to attach my database
with sp_attach_db? but get an error
Location: pageref.cpp:3931
Expression: rowLog.RowCount () == 1 || pPage->IsEmpty ()
SPID: 10
Process ID: 119
Connection Broken
View 1 Replies
View Related
Dec 6, 2001
Hi,
I'm doing some work for a client who has not been backing up
his databases. After a server crash he has been left with
the .MDF and .LDF files. I have managed to successfully
use sp_attach_db on all but two databases. When attempting
to use sp_attach_db I get the following error message :
1> sp_attach_db @dbname = N'CSGDEV', @filename1 = N'e:SQL_DataDirDataCSGDEV_Data.MDF', @filename2 = N'e:SQL_DataDirDataCSGDEV_Log.LDF'
2> go
Warning: sort order 51 in database differs from server sort order of 52.
Warning: Unicode comparison flags 196608 in database differs from server
Unicode comparison flags of 196609.
Msg 1816, Level 16, State 1, Server CSGSERVER, Line 1
Could not attach the database because the character set, sort order, or Unicode
collation for the database differs from this server.
Warning: sort order 51 in database differs from server sort order of 52.
Warning: Unicode comparison flags 196608 in database differs from server
Unicode comparison flags of 196609.
Msg 1816, Level 16, State 1, Server CSGSERVER, Line 1
Could not attach the database because the character set, sort order, or Unicode
collation for the database differs from this server.
I'd appreciate any ideas. I'm not a SQL Server expert (heck, I'm not even
a Windows expert...) as you can probably tell.
Thanks and cheers,
Deeran
View 1 Replies
View Related
Feb 2, 2004
I entered the following in the Query Analyzer and got the result shown:
EXEC sp_attach_db @dbname = N'DS2004',
@filename1 = N'd:ds2004_data.mdf',
@filename2 = N'd:ds2004_log.Ldf'
Server: Msg 5172, Level 16, State 15, Line 1
The header for file 'd:ds2004_data.MDF' is not a valid database file header. The PageAudit property is incorrect
I can find nothing about PageAudit property.
What is it and how do I need to modify the command?
Many thanks
View 2 Replies
View Related
Jul 20, 2005
HiWith the sql server on line help , The syntax for the sp_attach_db hasthe file name .It is aslo given that max of 16 files can be geven. Iattached a db with a single d.mdf .could u pls tell what r the 16 file types or how a db can be attachedwith 16 files.With thanks
View 1 Replies
View Related
Nov 12, 2003
Hello,
We use local server windows groups to allow or disallow use of our SQL databases. We are now being asked to move off of our current server. My thoughts are to dettach and attach the database. What is going to happen to all my permissions based on the user groups of our old server? I intend to create the same group names on the new server but they will be newservergroupname as opposed to oldservergroupname. Is it just a case of scripting the database user, roles and object level permissions an manually changing oldserver to newserver?
View 3 Replies
View Related
Jul 20, 2005
I am attaching a database with 3 data files.When I execute "exe sp_attache_db..." I obtain this error:database 'POINT' cannot be opened because some of the files could not beactivated.I have deleted its LDF file.Usually I detach my db, then I delete transaction log, and reattach 3 datafiles...Now it doesn'work!!!!!!!!!!Someone can help me?Thanks.
View 1 Replies
View Related
Oct 29, 2007
hi,
My problem is, I am going to ship MSDE with our product. Now the problem is that if some one copies the .MDF and .LDF files and uses "sp_attach_db" to attach the db files to his own server then my database will be exposed to him. I have tried this and it gets exosed. I cant deploy NT Authentication for the database, bcoz if the end user installes Enterprise manager then my database will be exposed to him. Is there any way that i can sequre the LDF and MDF files of my database so that no one can use that with sp_attach_db? I m using MSDE(Sql server 2000).
View 10 Replies
View Related
Apr 4, 2000
Here's one. :)
I have Database A in Server 1 which contains objects (tables and SPs) that are owned by users other than dbo. Then I detach this database from Server 1 using sp_detach_db and attach it to Server2 (sp_attach_db). Even if the same logins exist or are created in Server 2, I still won't be able to access the objects in Database A using these logins. I know that this happens because of different SIDs for the same login names across the 2 servers. So given that I want to achieve this without having to use the Import Wizard or any other method, how do I go around this lil bit of a problem? Any thoughts? :)
Thanks!
View 1 Replies
View Related
Mar 1, 2001
Hi,all.
I tried to issue:
sp_attach_db pubs,'F:anthonypubs.mdf','F:anthonypubs.ldf'
where the pubs.mdf and pubs.ldf are on a remote mapped drive F:,
I got error:
Server: Msg 5105, Level 16, State 4, Line 1
Device activation error. The physical file name 'f:anthonypubs.ldf' may
be incorrect.
Is attaching a database ONLY supported for local servers ??
What about creating database on remote drive? (I have same error msg back)
Thx
Anthony
View 1 Replies
View Related
Dec 13, 2005
I have an application that uses Integrated Windows authentication. My Web.config looks like below
<add key="dbconnection" value=" server=XXX;Initial Catalog=XXX;persist security info=False;Integrated Security=SSPI;Pooling=true" />
When users try to access my application, they get the below error:
Execute permission denied on object 'SprocName', database 'DBNAME',Owner,'dbo'
The Only way I could get rid off the error is if I set DBO permissions for the user group on the databse.
Can someone suggest how to set up a security group with the ‘necessary’ permissions on SQL SERVER (ie read,write execute Sproc etc) and not too many extra ones, like DBO.
Thanks,
View 2 Replies
View Related
Apr 25, 2007
Here is the error, I receive:
Msg 5105, Level 16, State 4, Line 1
Device activation error. The physical file name 'L:Program FilesMicrosoft SQL ServerMSSQLLOGTestDB_Log.LDF' may be incorrect.
Device activation error. The physical file name 'L:Program FilesMicrosoft SQL ServerMSSQLLOGTestDB_Log.LDF' may be incorrect.
Msg 5170, Level 16, State 1, Line 1
Cannot create file 'L:Program FilesMicrosoft SQL ServerMSSQLLOGTestDB_log.LDF' because it already exists.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'TestDB'. CREATE DATABASE is aborted.
Here is my attach script:
USE [master]
GO
sp_attach_db @dbname= N'TestDB',
@filename1 = N'S:Program FilesMicrosoft SQL ServerMSSQLDataTestDB.MDF',
@filename2 = N'L:Program FilesMicrosoft SQL ServerMSSQLLOGTestDB_Log.LDF'
This server has a Raid 5 Disk Array partitioned into three Logic Drives C:, S:, L:. Not sure, why the server was configured this way. If I attach the database with the data and log files on the same logical drive, the DB attaches successfully. When I try to put the data and log files on separate logical drives, it fails. Issue seems to be with the drive partitioning. Any Ideas?
View 4 Replies
View Related
Sep 19, 2007
SQL Server 2005 anomoly?
In SQL Server Management Studio I granted specific permissions to user "A" to do Select, Insert, Update, Delete on Table "B" -
When I logged on as User "A" and attempted the Insert imto table "B" I got the following error:
"Insert Permission Denied on Table B, Database C, Schema dbo"
Is this a problem with the dbo schema?
Then I went back and created a stored proccedure "D" with the exact same Insert statement inside the procedure. I granted User "A" execute permission on the stored procedure "D".
I then logged on as User A and executed Stored Procedure "D". No Problem - stored procedure executed fine with the Insert.
I attempted the Insert statement again - straight SQL - as User "A" and got the same error as above ("Insert Permission Denied.....")
Strange behavior - cannot do a SQL. Insert even though user has permissions but can execute a store procedure with the same Insert statement.
What gives?
View 2 Replies
View Related
Mar 9, 2013
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
View 14 Replies
View Related
Oct 2, 2005
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies
View Related
Jul 23, 2005
Please help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?
View 1 Replies
View Related
May 3, 2006
I get an error when trying to install the SQL Native Client. It
says it cannot find the installation package and to use a valid copy of
'sqlncli.msi'. I've downloaded the Express setup twice and get
the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced
Server. I am trying to test my installation and setup
procedures. This is not a production setup, just install testing
and documentation. I have allocated only 272MB to the VMWare
session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware
requirements for this SQL Server release. For detailed hardware
requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : SQL Native Client
Error : An
installation package for the product Microsoft SQL Server Native Client
cannot be found. Try the installation again using a valid copy of the
installation package 'sqlncli.msi'.
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Failed
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLNCLI_1.log
Last Action : InstallFinalize
Error String : An installation package for the
product Microsoft SQL Server Native Client cannot be found. Try the
installation again using a valid copy of the installation package
'sqlncli.msi'.
Error Number : 1706
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_MSXML6_1.log
--------------------------------------------------------------------------------
View 4 Replies
View Related
Oct 2, 2006
Hi every one,
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
View 11 Replies
View Related
Sep 13, 2007
http://www.abvalve.com/careers/form/
can someone please tell me whats the problem with this?
I actually gave that user permission and and still did not work, the DB is in the appdb folder and the network services user is granted full permisions on that folder!
Any ideas
View 1 Replies
View Related
Jan 18, 2008
every things at sql2005 have to permission
table , create , select , stored procedure
every things have to make permission to NT AUTHORITYSYSTEM
at last i do every thing without permission how can i make it without it
View 4 Replies
View Related
Jan 27, 2008
I tru to add connection to my db in Visual Web Developer 2008 express.
Data source: - I use Microsoft SQL Server Database File (SqlClient).
Under Data File Name: I browse and choose the database and I get this error message
"ECommerceDbYou don't have permission to open this file. Contact the file owner or an administrator to obtain permission." WHat should I do? I already give full control to all users.
My environment is ms sql 2005 express and window vista business version. Thanks for any help.
View 1 Replies
View Related
Mar 8, 2001
I have created a DTS package that get a information form a text file and insert the data into a table and package is save as Structured Storage File. Now I am calling this DTS package thru VB application. The pacakge is save under folder that is shared to everyone.
When I run the VB application it runs fine using my login. but when I login as other user(webapp) it does not work. Webapp has DBO rights to the database that importing the data.
I am not sure if this is a permission issue or not.
Thank You,
john
View 1 Replies
View Related
Aug 20, 1999
Hi, is there a smarter way to grant permissions on a lot of tables to a user rather than accessing the "Permissions" button on the Database User's Properties?
In SQL 6.5 there is "Object Permissions" that lets me "Grant All". Isn't there a similar way to do it in SQL 7?
View 2 Replies
View Related
Nov 12, 2004
I have a database with over 100 tables. I need to add a user with deny permission on all tables except one. Is there a way of doing this without having to enter the names of all the tables and not using EM and ticking over 100 boxes? I tried to write the script using a select from sysobjects where xtype = 'U' but it didn't like it very much!!
Any help would be greatfully appreciated.
Many thanks
View 4 Replies
View Related
Jan 15, 2008
Hello, Can anybody explain why a new loggin with Master Database as the Default Dafault Database without any clear permission to a particular database would allow me selection in a pubs or northwind database for an example. Thanks
View 5 Replies
View Related
Mar 4, 2004
I created a DTS package to extract data to a text file.
I want to create a login for a user who should be able ONLY to run this DTS. I don't want to give him/her any access to any database .
Is that possible?
Thanks in advance
Giorgio
View 3 Replies
View Related
