Permissions In SQL Server 2005 To Allow Users To View The Management Activity Monitor?
Sep 27, 2006
For SQL Server 2000 we have a user login mapped to msdb with database role membership of db_datareader and public checked. This seems to allow the developers to view the Management Activity monitor. For SQL Server 2005 the same mapping is in place but the developers cannot view the Management Activity monitor. Developers are NOT granted the sysadmin role, and should not have that role.
What permissions need to be set for SQL Server 2005 to allow users to view the Management Activity monitor? They should not be allowed to take actions on the activities.
View 13 Replies
ADVERTISEMENT
Mar 14, 2007
Hi,
We have development and user acceptance (UA) servers. When I start a job on the development server, on the management studio, Start Jobs window and Job activity windows indicate "Executing" until the end of the job and finish with "success" or "failure"
But on the UA server, second after I start a job, Start Jobs window comes up with "success" or failure" and Job activity monitor says "idle" but Job continues to log without any error message and updates the tables. So these two windows are not reliable at all. I have to add that I have only job operator rights on the UA server.
Does anybody know what the reason is ?
Thanks
View 5 Replies
View Related
Aug 19, 2015
If I'm on a remote machine, meaning a computer not in the WSFC cluster, and I open SSMS 2014, point it to a SQL Instance, and open activity monitor:
1. I get all the panes and charts except % Processor Time.
2. Then, if I authenticate to the cluster's domain by mapping a drive with valid domain credentials, I'm free to put performance counters in the Perfmon - - - but SQL Activity Monitor shuts down with“The Activity Monitor is unable to execute queries against server SQL-V01INSTANCE1..Activity monitor for this instance will be placed into a paused state.Use the context menu in the overview pane to resume the activity monitor.
Additional information: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))(Mscorlib)”
3. Of course, the Activity monitor can't be resumed via the context menu. Removing counters and closing the perfmon do not work. I dropped the mapped drive and rebooted the machine. That brought back 95% of the information in the Activity monitor.
4. Further experimentation showed that any mapping of drive shares present on the SQL Server to the computer running SSMS cut off functionality of the 'overview' pane in the remote machine's SQL Activity monitor -- the monitor that had been trying to watch the server offering the shares.
View 4 Replies
View Related
Jul 20, 2005
I am in need of a utility (stored procedure, third party app, etc)that will help streamline the process of managing and auditing objectpermissions, users and roles on multiple sql server 2000 instanceswith multiple databases on each instance. That's a quick overview ofwhat I need, do I need to be more specific?Thanks.
View 2 Replies
View Related
Apr 19, 2007
I'm hoping that someone has experienced this problem before and knows how to get round it.
The problem we are having is that we have a job that is scheduled to run at 4:00 am each morning, for the past 6 weeks it has done this with no problem. However, this morning it failed. we know it failed because it didn't produce the results it was supposed to. However the monitor said that the job had completed successfully. On examining the history of the job we found that the job was still running!!! When we tried to stop the job by right clicking and selecting the appropriate action. The action available to us was to start the job.
After arguing for a bit we decided to try and run the job again. We did this and found that the job running in the history screen terminated with an error and than ran and completed successfully.
Confused? So are we any ideas or solutions gratefully received
View 3 Replies
View Related
May 28, 2015
Is there a way to permanently change the order of the columns in Job Activity Monitor?
I'd like to move Duration to the right of Step Name, but this only lasts so long as I have JAM open. Once I close it and re-open, JAM goes back to its default column order. Google gives me nothing but the temporary "drag and drop" method that I already know about.
View 2 Replies
View Related
Apr 5, 2007
How do you view permissions granted to an id, such as ALTER TRACE permission, using Management Studio? I want to see if ALTER TRACE permission has been granted to an id, but am unable to find this information in the GUI.
Thanks, Dave
View 2 Replies
View Related
Dec 20, 2005
As part of our security project, I've done the following when logged in as 'sa':
Created database roles 'dbrole1' within dbAccount
Created login and user 'user1' and added user to be a member of 'dbrole1'
Granted execute permissions on sp1 and sp2 to 'dbrole1'
However, I didn't see the above permissions listed in SQL Server Management Studio - Database - Security - Roles - Database Roles - 'dbrole1' properties - securables
Any ideas? Thanks!
View 4 Replies
View Related
Apr 10, 2008
Is there a way to allow a user to run activity monitor without making that user system admin
View 9 Replies
View Related
Apr 23, 2008
Hi experts,
I just want to know how can i kill all the processes of a database
if the database have more than 100 connections.This is for the purpose of restoring a database.
RKNAIR
View 3 Replies
View Related
Apr 10, 2007
Is there a way to give access to non-admins on ACTIVITY MONITOR?
------------------------
I think, therefore I am - Rene Descartes
View 2 Replies
View Related
Sep 10, 2007
Hi,
I have a problem with Job Activity Monitor.
I have a SSIS which copies data from a table to a flat file. The connection string of this file is variable and the file is reused if not exists and is created if exists.
When I run the SSIS manually from my microsoft visual studio it works properly. However, when I run this SSIS from the Job Activity Monitor, I get the following error:
Message
Executed as user: REDCAMadminsql2k5. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:41:10 AM Error: 2007-09-10 08:48:04.99 Code: 0xC020200E Source: Crear Historico Historico [1] Description: Cannot open the datafile "\srvnfileHISTORICOSCAJEROSOFI3210C01OFI3210C01_2007-7X.txt". End Error Error: 2007-09-10 08:48:04.99 Code: 0xC004701A Source: Crear Historico DTS.Pipeline Description: component "Historico" (1) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:41:10 AM Finished: 8:48:53 AM Elapsed: 462.234 seconds. The package execution failed. The step failed.
Any idea?
Thanks.
View 3 Replies
View Related
Oct 5, 2007
Hi All,
I want to analyze server (SQL 2005) activity at a specific time in the past. Unfortunately, there doesn't seem to be a log file reflecting the information in Activity Monitor. Knowing that the sysprocesses and syslocks tables feed Activity Monitor, I thought about doing a log analysis on the master transaction log, but I'm not sure that's possible.
Is there a (different) way to achieve this?
Or is there a better approach to identifying processes that cause performance bottleneck/deadlocks?
Any input would be appreciated.
Ken
View 4 Replies
View Related
Feb 6, 2007
Hi,
I've been using the Job Activity Monitor quite a lot and last night I installed Service Pack 1 for SQL Server 2005. I've noticed now that I only have a "Start Job at Step" option when I right-click a job. Whereas I used to have just Start Job or both Start Job and Start Job at Step options.
The problem is that Starting a Job at a Step, produces a modal dialog box which prevents further access to Job Activity Monitor until the job is complete.
Does anyone have any comments regarding this?
Thanks in advance,
Richard.
View 1 Replies
View Related
Apr 4, 2007
Hi!
I want to extract the same information as the Activity Monitor does with SQL in SQL Server 2000.
Have tried to use sp_who2 but I miss some important columns.
How do I do?
Thanks!
View 2 Replies
View Related
Oct 25, 2007
If you are in SQL Server Management console, go to Job Activity Monitor, there is an option 'View Refresh Settings'. You have to enable/check the Auto Refresh option here every time. Is it possible to keep this Auto Refresh enabled?
Thanks!
Olaf
View 6 Replies
View Related
Apr 17, 2008
Hello,
In SQL Server Management Studio (2005), 'Open table' command or a SELECT query displays table rows in a grid (or text).Please tell how to view a single row at a time i.e. all only ONE row is displayed at a time (evenly arranged to cover the screen).
This feature (Single record view) is available in other database client like TOAD.
Thank You
View 5 Replies
View Related
Oct 15, 2014
I have a SSIS package set up that will transfer a file from a location on the network drive and transfer it over FTP to another location.
When I manually run the package, the file is transfer with no errors. But when the job is automated (via Job Activity Monitor) the transfer fails?
I have set the ProtectionLevel of the package to "EncryptSensitiveWithUserKey" and also converted the package to a Development Model. The settings for the FTP is saved within the package.
What am I missing? below is the error message
Executed as user: UHBInfoSQLAgent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 08:43:02 Error: 2014-10-13 08:43:03.72
Code: 0xC001405F Source: ResearchWebsite
[Code] .....
View 2 Replies
View Related
Feb 22, 2015
We have killed a job which is now in KILLEDROLL BACK state. Job activity monitor is not showing any running jobs but I can see the SPID of that job. When tried to kill again its giving the message ‘command completed successfully‘, not able to get the percentage or time for the roll back to complete.
Another DBA tried to create a snapshot and it was stuck and I believe it was because of this ROLLBACK as both were using same Database.
View 5 Replies
View Related
Jun 4, 2007
All;
We have a Windows App and Web App that share business objects which points to a single database. When a Windows user logs in, an average of 50 processes are created in the first few seconds and never go away. The details window is blank and they all remain sleeping from that point on.
I have stepped through the code to see if there is anything odd going on but most of the processes are created when validating the number of parameters the stored procedure has or the length of the stored procedure name. This translates to 1000-1500 processes on average.
Is this normal? Will it hurt performance? Is there a way to remove them?
View 1 Replies
View Related
Apr 23, 2013
When I try to open Activity Monitor from SSMS I receive the message "Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)". - more details below.
I have a SQL Server 2012 Enterprise SP1 installed in an Active/Passive cluster configuration on Windows 2008 R2 Enterprise SP1. The problem happens using sa and a domain administrator.
------- more details -------
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
[Code] .....
View 5 Replies
View Related
Jul 23, 2005
Dear AllI have problem with my database server which running SQL server 2000.The server running very slow. The worst case, to save a record requiredmore than 20-30 seconds.Since this problem, I usually monitoring Process Info from EnterpriseManager (Management - Current Activity), and I found a misteriousprocess as follow :1. User: SystemAccessTo: MasterStatus: BackgroundCommon: Task ManagerWaiting: >438 Million2. User: SystemAccessTo: MasterStatus: BackgroundCommon: Task ManagerPhysical IO: > 510003. User: Administrator (Join domain)Database: MSDBStatus: SleepingCommon: Awaiting CommandApp: SQL Agent Alert EngineCPU Usage: > 16 MillionAnybody know about these condition? Does it normal?ThanksMichael
View 3 Replies
View Related
Oct 24, 2007
Hello experts. I inherited two SQL2000 SP4 servers. ServerA is configured with a Linked Server (ServerB). The problem is that liked_user which is the login configured "For a login not identified in the list above, connections will be made using this security context" is a sysadmin on ServerB. This means that any login from ServerA can do havoc on all databases in ServerB! There are many DBs and logins on both servers and no one can tell us which login is supposed to connect to the other server on which DB with what permission. Now, we want to trace which logins in ServerA use this Link so we can reconfigure this nasty setting.
I started the following SQL Profilers: On ServerA --> Filter TextData Like %ServerB%. On ServerB --> Filter LoginName Like liked_user AND HostName Like ServerA
Interesting enough, several entries were logged on the profiler i ran in ServerB which means that liked_user logged into ServerB from ServerA. Since liked_user is only used by the Link, i can safely conclude that the link was used by some login in ServerA. BUT, nothing was logged in the profiler i ran on ServerA!
Can anyone help me sort this one out? Thanks in advance,
View 1 Replies
View Related
Apr 14, 2015
Is there anywhere in the SSMS to see the start time of a currently running job, currently running it's first step, without needing to run a query?
If not, why would Microsoft decide to not show it in the job activity monitor?
SSMS = Sql Server Management Studio
View 1 Replies
View Related
May 18, 2007
The activity monitor is not showing entries for hosts which connect via sql logins (odbc), is this normal? Where can I find a list of protocols in which the hostname/ip can be picked up. We're on SQL 2005 SP1/Build 2153
Thanks
View 2 Replies
View Related
Sep 26, 2007
Hi
we have one 'application'-user in sysusers that makes the connect to SqlServer for all users, for example:
Application Login-User: Thomas
DB-Connect-User: AppUser
With this solution, in Activity-Monitor or with sp_who I don't know, what is the real name of the connected user.
Any possibility to change the login-information after the connect, so that i can see 'Thomas' in Activity-Monitor or with sp_who?
Thanks for your help.
Thomas
View 4 Replies
View Related
May 16, 2007
Please forgive the simplicity of this question - I am not the dba type. When I connect to a server and look at my connection attributes in activity monitor, the user column shows the correct information for my domainusername. When I run a certain stored procedure in that connection, the domainusername changes to another person. We are not using execute as, setuser, or anything special to explicitly change the user. The stored procedure is in a schema that is owned by dbo (principal_id = 1 - I verified by checking sys.database_principals.)
Does anyone have any suggestions?
Thanks in advance,
John Hennesey
View 4 Replies
View Related
Aug 14, 2007
We are currently running sql 2000 and are moving our database onto sql 2005 running on a different box.
We have managed to move the entire database, with users however the users permissions on specific tables/views/stored procedures have not been transferred, does anyone know a way of transferring user permissions rather then doing them all by hand?
The system is a large (over 500 table/views/stored procedures) and a very active one and therefore downtime is not optional.
any suggestions would be appreciated
Regards
Chris V
View 2 Replies
View Related
Jun 30, 2005
I'm trying to apply some security to my database, so i've created a role, added my user to the role and then set the security rights for the role. Everything work great, the security right behave exactly as defined....However, when I go back the the Permissions pages, the values that i've already set don't appear in the lists (the all still work). In Fact they don't show up anywhere either in the permissions for the table / sp concerned or the right for the user or role.Is it just me, or is it a problem with SQL 2005 Management Studio? or can anybody suggest a way of finding the securty rights of any given database object?Microsoft SQL Server 2005 Beta 2Microsoft SQL Server Management Studio 9.00.1116.00RegardsGary T
View 2 Replies
View Related
Sep 18, 2007
Hello team, I have learned quite a bit from everyone here. I have decided to post a question for you guys and see what the best method is. Our Sr. DBA has asked me to get a list of all of our users permissions on all of our databases. We have about 20 SQL servers some of which have more databases and instances than I have fingers and toes. Can anyone recommend any solution to this problem? Perhaps there is a script I can download/write which will help me on this? Thanks in advance.
View 10 Replies
View Related
Feb 2, 2007
Our company has 2 Database Roles (DBE and DBA). The DBE creates
database schema, performs SQL Server Administration, and manages server
security. The DBA writes data access, ETL, and manages database
security. In 2005, we're struggling with how to allow the DBA to see
all of the logins on the server in order to add them as users of their
database. What permissions does the DBA need to select from any of the
logins on the server to add them to their database?
Michelle
View 1 Replies
View Related
Nov 20, 2002
Trying to view current activity in EM however get error 1222 Lock request time out period exceeded, this also occurs when trying to view tempdb database.
Is this a EM Gui error or locking issue and hwo do you resolve?
Thanks
GaryW
View 5 Replies
View Related
Feb 7, 2007
I have a complex view in my sql 2005 database.
The view returns a column that could be null (as the result of a left outer join).
The coulmn that is returned is an integer.
Everything works fine if I run the view from SQL 2005 Management Studio.
My column value is always null if I use ADO.NET's SqlAdapter to return a DataTable.
Has anybody seen this behaviour before?
Any help appreciated.
Regards,
Paul.
View 2 Replies
View Related
