Picking A Data Source File From Configuration

Mar 7, 2008



Hi there,
I believe this is simple requirement but to me it seems to be complicated. My data source is excel. I would like to configure the path of my data source in SSIS Package and file name is not a constant value. SSIS package should pick the file named as Today's (current) date from the configured path. As well, package should catch the exception for example file not found and log into custom log. It would be gr8 if some body helps me out.

View 7 Replies


ADVERTISEMENT

Integration Services :: For Each Loop Container Is Not Picking Up CSV Source File

Jul 2, 2015

My package is having .csv file as a source and I kept OLEDB destination to load it.

Stored the .csv file in a shared folder and the exact path is given in Enumerator configuration of the foreach loop container. When I execute my package, it is giving the warning as below:

It is saying that file is not there in the specified path and directory is empty. I am running the SSIS package from TFS. I am sure that I have read and write access for the shared folder for my userID. Is there any access there to pick up this file from path.

View 4 Replies View Related

Error When Using Configuration File For Source And Destination Connections In A Data Flow Task

Mar 7, 2008

Hi all,

I have a package that does simple exporting from an excel sheet to a table.
I used a Dataflow task with Excel Source and OLEDB Destination Components.
And i created Package configurations for Source and Destination Components.
After than when i execute the package i get the following error.


Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".

Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".

SSIS package "ProductDetails_Import.dtsx" starting.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.

An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".

Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.

Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.

Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.

Error: 0xC0024107 at Data Flow Task: There were errors during task validation.

SSIS package "ProductDetails_Import.dtsx" finished: Failure.

The program '[2416] ProductDetails_Import.dtsx: DTS' has exited with code 0 (0x0).

I have been trying to troubleshoot the error message given below from last evening.


I have been trying to troubleshoot the error from last morning.
Counld not figure out what is causing this error to occur.

Please help!!!!
Any pointersSuggestions would be highly appreciated.

Thanks & Regards

View 3 Replies View Related

SQL Server 2005 Developer In My Computer, But ASP.NET Tab Configuration Was Data Source=.SQLEXPRESS?

Oct 12, 2006

Hello allMy computer was installed with SQL Server 2005 Developer version, however, I checked the Default Web Site in Internet Information Service console and saw that the ASP.NET configuration was not correct as below."data source=.SQLEXPRESS;Integrated Security=SSPI; AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"I have a question that can I replace the string, “.SQLEXPRESS”, with my server name and my SQL Server 2005 Developer named instance as below“DEVSERSQL2005Dev”?Thanks in advance for your help.

View 3 Replies View Related

Package Not Picking Up Latest Config File Changes

Nov 7, 2006

Hi,

I've created a solution with 5 packages in. I've scripted a config file for each package where I would be able to change the source file connection and the database servers (source and destination). On the first package, I am able to change the config attributes and the affects are picked up, but the rest of the packages do no pick up the changes.

For example, if the source file is "C:Filessource.txt" and this is changed to "C:Filessource123.txt" (Just to make sure it fails) it wont pick up the new changes and still uses "C:Filessource.txt".

Also, I tried changing the name of config file itself and the package still ran as if nothing had changed. It's as if it's not recognising the config file.

Any ideas ?

Thanks, Richie.

View 9 Replies View Related

Integration Services :: Metadata Change In Source Disturbs All Configuration Of Source

Jun 18, 2015

I have a got a package with source as sql table which has got 50 columns. We are using only 10 columns out of this. Recently one column name has changed and thus throws error invalid mapping. When I open the source to do the changes noticed that all the colums are prselected now and also the datatypes got changed to default ( I had changed the datatypes as per my requirement while i developed). So now I had to select required columns from source and redo the datatype changes in advanced editor.Is there any option which doesnt disturb this settings and we just need to correct the mapping alone. 

View 4 Replies View Related

Meta Data Synchronization With Excel File Source Once We Update The File

Dec 28, 2007



hi all;

1. Excel file Source--> monthly Revenue details
2. Derived Colum Transoformations
3. Oledb Destination

its my flow in one of my packates (ETL job)
Excel file contains monthly revenue details, i wanna import the excel data to my database staging table, so i've created the package.
its working fine...

Problem
if we change the new data for the next month and running the package its not running;
the same file, same format, only we delete the contents, of the file except first row of the excel sheet,
and pasting the new data;
new data is coming from Oracle DataBase in the form of excel sheet ( manually they will copy the data and sending to us)

i open that package in design mode and while double clicking the excel file source it says <column name>'s Meta Data needs to be synchronized
Do you want to Fix this issue automatically with the available external column's meta data

Clearly noted that its a data type issue; i have changed the corresponding data types as it is in the previous Excel sheet which is equivalant to the Table its copying to.

now the package is running with validation warnings, External Column "Invoice Amount" needs to be updated...etc. some 2 or three warning messages i can able to see in the package Execution wizard,

ok, i'm ready to accept these warnings, and i want my package running from my server;( packages had been deployed in to the Centeralized server; every time if we want to run the package, we have the asp.net webpage, that is executing the package in an On_click event)

The package is not running from the server, its due to the meta data change in the Excel file( i guess)

please suggest me some guide lines to resolve this meta data issue, i want my excel sheet meta data should not change when we have new updates in it;

otherwise suggest me some solutions that i can validate the excel sheet before running the package and testing whether the data is in correct format or not? its a kind of Data Profiling activity;

i know its some what crazy, but i need to maintain the system with permanent solution, instead of facing this meta data mismatch issue!!!

some what lenthy explanation--> its needed for my dear powerful microsoft responders. i think i 've explained my problem clearly, if i don't let me know your queries, i'll try my level best.

View 3 Replies View Related

Picking The Specific Data

May 16, 2007

I have in my table something like this
Col1 Col2
6 O
6 O
6 C
6 C
6 C
5 O
5 O

i want the value as 6 iff all the corresponding
records in col2 are C
similarly, since for 5 there are no C it should
not pick record 5

Please suggest me a query for this

View 10 Replies View Related

Picking Up Data Meant For Many People

Nov 29, 2007

Hi,I have a gridview on a page, which should select data from a database. I want it to select the data row if it finds its UserName in the UserName column, but there will be many usernames in the username column, seperated by commas.Here is the select statement that I have at the moment, which doesnt return any data atall:SELECT [message], [senddate], [subject], [messageid], [sendername], [recievername] FROM [Messages] WHERE ([recievername] LIKE '% ' + @recievername + ' %')@recievername = Profile("UserName") which is the vwd wizards way of saying the current user. A Username column has data like this:bezzer , bezlan , beezer , beezler with a space between commas and a space at the start and the end.Thanks if someone can help!Jon  

View 2 Replies View Related

Custom Assembly : Retrieving Data From From Configuration File.

Mar 7, 2006

Hi all,

my problem is that: I do read informations (e.g. connectionString) from configuration file by one custom assembly.
My environment is RS2005, VS.NET 2005 Prof.Edition, WIN2003 Server SP1, .NET Framework 2.0.50727
The scenario is that:
A text box into my report require a function contained into MyCustom.dll. This code do read information from MyCustom.dll.config.

This file contains:

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
<add name="IS2009cfg" connectionString="data source=servernameinstancename;initial catalog=dbname;user id=xx;password=yy;" />
</connectionStrings>
<appSettings>
<add key="DefaultHeaderLogo" value="This is a test" />
</appSettings>
</configuration>

Using
ConnectionStringSettings conn = ConfigurationManager.ConnectionStrings["IS2009cfg"];
the result is null.

Also using
string defaultHeaderLogo = ConfigurationManager.AppSettings["DefaultHeaderLogo"];
the result is null.

MyCustom.dll and MyCustom.dll.config are located into locations of Report Server and Report Designer, with this Build Events on succesfully build:

rem Copy custom assembly to ReportDesigner location...
copy "...mydeveloplocation...inDebugMyCustom.dll" "C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMyCustom.dll"
copy "...mydeveloplocation...inDebugMyCustom.dll.config" "C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMyCustom.dll.config"
rem Copy custom assembly to ReportServer location...
copy "...mydeveloplocation...inDebugMyCustom.dll" "C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesReportServerinMyCustom.dll"
copy "...mydeveloplocation...inDebugMyCustom.dll.config" "C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesReportServerinMyCustom.dll.config"

The question is simple: where I do locate configuration file for obtain value during report execution?

Many thank's in advance

Claudio Barca
Turin - Italy





View 2 Replies View Related

T-SQL (SS2K8) :: Load Data From Flat File Source Into OleDB Destination By Changing Data Types In SSIS

Apr 16, 2014

I have an source file and i have to load it into the data base by changing datatype of the columns in ssis

View 1 Replies View Related

How Can I Use An XML File As A Data Source?

Feb 29, 2008

I have an xml data file that resides on the same server as where SSRS is installed. I'd like to use this file as my data source for a report, but I'm having difficulty formulating the xmldp query that will allow me to access it.

So if I have a file called D: estmyfile.xml (on the server), any ideas on how I would be able to use this file in a report?

View 3 Replies View Related

Excel File As Data Source

May 19, 2007

Hi everyone!
I am trying to import data into my sqlserver 2005 database from an Excel 2000 file. The database is empty. I am using the worksheets from the file to create the tables and copy the rows. I am getting follwing errors:
- Pre-execute (Error)


Messages
Error 0xc0202009: {674E15E4-102E-4935-90A2-8B1FFFEFB11D}: An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009.(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 64 - vw_TempOrderDetails" (5280) failed the pre-execute phase and returned error code 0xC020801C.(SQL Server Import and Export Wizard) 
 
Any suggestion is most welcome.
Regards

View 5 Replies View Related

Data Source File Name Has A Timestamp

May 3, 2006

I have 2 years worth of data that are stored in individual .dbf files for each day. Is there a way to 1 quickly import all of these tables into one and 2. move the timestamp from the file name to a date column?

Any help would be greatly appreciated

View 1 Replies View Related

Flat File Data Source

Aug 29, 2006

Is there away to use wild card in the file name for the flat file data source?

Like //servername/directory/*.txt

View 5 Replies View Related

Redirect Bad Data From Flat File Source

Apr 17, 2008

Hi, all,

I have this SSIS data flow ( Flat file to sql server) that I want to add a step to redirect any "bad" data instead of fail out.

I had the red arrow hocked up to a sql new table to dump the bad data, but the flow still failed.

Here is the first error, and I knew what was wrong. A description field in that line has pipe(|) character in it, which also happen to be the column delimiter in this case.

[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "Column 22" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".

I knew if I fixed the data, every thing will be fine, but I just want to use this redirect feature of SSIS. Is there a place where I can turn off validation, or do something to make it work?

Thanks!

View 8 Replies View Related

Bad Data In Source File Kills Package?

Sep 28, 2005

I'm reading data from sets of CSV source files with " text qualifiers.  Most of the data is good, but I do run into some bad data that doesn't seem to get handled by redirecting rows.  The type of data that is killing me is this:

View 4 Replies View Related

How Do I Run SQL Commands On A Flat File Data Source?

Jan 2, 2008

I am attempting to pull in data from a flat file data source that contains dates in the following format "01012007 10:22" which translates to Month Day Year and Military Time. I want to turn this into a DateTime format so that I can insert it into the proper column. I have a SQL statement which will do this (see bellow), but I can't figgure out how to run the statement on the data before it reaches its destination.

Can anyone help?

The code is:




Code Block
cast(convert(varchar(16),(substring( REPORT_RUN_DATE,1,2 ) + '/' + substring( REPORT_RUN_DATE,3,2 ) + '/' + substring( REPORT_RUN_DATE,5,10 )),1) as datetime) AS REPORT_RUN_DATE

View 9 Replies View Related

Data Not Flowing Out Of Flat File Source

May 5, 2006

my package has a flat file source that should be extracting data from a text file passing the data to the next component in the data flow. the package validates fine, but the data isn't flowing. however, i see the data in the source component. i added a data viewer between the source and the next component to see if any data flowed and saw no data. can someone suggest how i should go about trying to debug this? thanks.

View 13 Replies View Related

Restore To New Db Restores Less Data Than What Is In The Source Backup File

Jan 25, 2006

I am trying to create sql code that restores a backup of a master database to a new database on the same server. It “seems” to run correctly as no errors are produced. However, the most recent updates to the master database are not present in the new databases. All databases are using the Full recovery model. What is really strange is that if I do (what I think is) the same function in Enterprise Administrator, the restore works fine! For both methods I used the same backup file!



Any and all help is sincerely appreciated.


The master databases from which the backups are made start with “MODTRNMaster”

The databases which are created from the restores start with “M1_” and “M2_”. (We call them training room databases.)



My script for backing up the master databases:



-- Backup the master training database

backup database MODTRNMaster
to disk = 'f:kupMODTRNMaster.bak'

backup database MODTRNMaster_IMG
to disk = 'f:kupMODTRNMaster_IMG.bak'

backup database MODTRNMaster_MNC
to disk = 'f:kupMODTRNMaster_MNC.bak'

backup database MODTRNMaster_VM
to disk = 'f:kupMODTRNMaster_VM.bak'

go


This is the restore script for restoring the first training room databases. I’m hoping that there is just something simple that I’m overlooking in these restore statements! J



-- Restore the backup of the master training database into the

-- training room #1 database.

use master
go

drop database M1_MSLH
go


restore database M1_MSLH
from disk = 'f:kupMODTRNMaster.bak'
with move 'DEV5_Data' to 'f:mssqldataM1_MLSH.mdf',
move 'MM' to 'f:mssqldataM1_MLSH_1.mdf',
move 'AMB' to 'f:mssqldataM1_MLSH_2.mdf',
move 'DM' to 'f:mssqldataM1_MLSH_3.mdf',
move 'IMM' to 'f:mssqldataM1_MLSH_4.mdf',
move 'ED' to 'f:mssqldataM1_MLSH_5.mdf',
move 'DEV5_Log' to 'f:mssqllogM1_MLSH_log.ldf',
recovery

go



Thanks in advance

:eek:

:eek:

View 5 Replies View Related

How To Change Data Types In Excel Source File?

Mar 8, 2006

I'm getting a bit lost in SSIS. I've got an Excel source file that I'm trying to load into a table. I keep getting validation errors that warn about not being able to convert between unicode and non-unicode string data types.

I'm trying figure out where I have to change this and am frankly confused. It seems SSIS is selecting various columns as unicode/WSTR data types, but I want them to import as regular string types.

On the Data Flow tab in SSIS, I right-click on the source Data Flow component (the Excel file) and select Show Advanced Editor. Then on the last tab, Input and Output Properties, there's a tree view for the Excel output. There are "External Columns" and "Output Columns" containers in the tree view.

I tried setting some of these but they don't seem to "take". Do I need to change the data type for each column under both the External and Output columns?

That seems like a lot of work! And, as I say, I tried setting some, but I still got the same validation errors. So, then I go back to this spot (Advanced Editor -> Input and Output Properties tab) and my changes seem to have been lost.

Any help would be appreciated!

View 5 Replies View Related

Row Count In Flat File Data Source Using SSIS

Jan 29, 2008



Hi,

I am trying to impliment a SSIS package where data source is a Flat file(.csv) file and destination is a sql server database.

The problem is my data source a flat file which consists of thousands of rows which are manually entered, so there is always a chance that in some rows they may miss a column value while entering data which results in an error.

Example: My flat file has headers like Sln, Name, Age, Designation. While entering data they may miss age and type it as 1,aaa,Consultant,,

Using SSIS package i want to track all row number in the flat file where data is entered wrongly so that i can correct only that row instead of checking all rows each time when my SSIS package throughs an error. I want to get all the row numbers in a sql server database which are wrongly entered.


Any suggestions are sincerly apriciated.

Thanks in advance

Regards,
gcs.

View 11 Replies View Related

Flat File Source Not Option For Importing Data

Feb 8, 2006

I was getting the product error associated with the full version of SSIS not installed so I ran the installation again and selected the Integration Services check box.



Now when attempting to import data into a database, the drop down list doesn't have a flat file option.

How do I import data from a txt, csv file?

Thanks

PatrickCrofoot@hotmail.com

View 4 Replies View Related

Basic Text File Data Flow Source

Jun 7, 2007

In DTS 2000 I had a situation where I had a text file as input source and text file as output source. On migrating the package to 2005 it puts a wrapper around it which executes it as a 2000 package, the rest of the tasks are neatly converted to 2005 style tasks. I presume this to mean that this will not be supported through to the next version, and there is no direct equivalent in 2005.



My question is how do I import a non-flat file source which has different numbers of columns per line. I did ,somehow, manage to do this with 2000 but cannot seem to get anywhere with 2005.



The flat file source seems to be expecting a common number of columns and just can't seem to cope with no column delimiters on some lines. If anybody knows different I would be glad to hear about it.



Raw data is not helpful to me as only works with a specific raw type (apparently)



Went onto Bulk Insert Task but got this message



[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.Bulk load: An unexpected end of file was encountered in the data file.".



Have already browsed with this on web but only find comments about changing timeout setting.



Can find timeout settings in DataFlow source and DataFlow destinations but not in Bulk Insert Task.



As you can see this is a long and protracted question.



If the answer is simple I apologise if not blame Microsoft. Other than that have found SSIS has some nice improvements, apart from the odd vague error message I keep coming across.

View 13 Replies View Related

Merge Data From Oledb Source And Flat File

Feb 26, 2008



Hi All,
In one of my SSIS Interface I have to Merge data from a Oledb source and a Flat file source.But after I read from the flat file I have do a basic validation of the file for the length of header,detail and trailer records and then process further.The above Validation I am doing within Script Component.If the validation fails the flow should pass out of the DataFlowTask without Initailsing the Oledb source.

But the problem is i am not able to connect anything to the Oledb source,i.e Oledb source is not taking any incoming Pointers.
Earlier I had done the same Validation in Control Flow Task,but then the interface was reading the same file twice,once in the Control Flow Task and then again in the DataFlowTask.Which i should avoid now.

I hope many of you could have come across such a problem.
Any help on this will be appreciated.

cheers
Srikanth Katte

View 5 Replies View Related

Potential Loss Of Data Error On Flat File Source

Nov 19, 2007



I'm getting a very strange potential loss of data error on my flat file source in the data flow. The flat file is fixed width and the column in question is defined as numeric [DT_NUMERIC]. The transform runs great if this column IS NOT A ZERO. As soon as a zero value is found, I get the error. It errors on the flat file source, so I haven't been able to use a data viewer to see what's going on.

Please Help!?

Thanks,
Scott Mescall

View 8 Replies View Related

SSIS Data Flow Source Component To 'read' A PDF File

Feb 13, 2008

At our business we are getting a lot of PDF documents that are being hand keyed into a database. Has anyone heard ior know of a SSIS Data Flow Source component that I coud use to read thos documents into a data stream (?) and process?

View 5 Replies View Related

Flat File Name As SSIS Data Source Input Parameter

Feb 29, 2008

Each day I receive a file with a different name. For example, the name is filename_mmddyyyy.txt where filename_ stays constant and mmddyyyy is the date of the file. The file is always in the same format.

I want to build an SSIS where I pass it this file name. I can write a script to generate the correct file name. How do I build the SSIS so it can accept the input parameter and find the correct file to process?

Thanks

View 3 Replies View Related

Import Excel Data From User-selected Source File

Dec 4, 2007

Is it possible to import data from an Excel spreadsheet using OPENROWSET or OPENDATASOURCE without having to explicitly define the filepath of the source file? Currently, I have this piece of code within a sproc:


INSERT INTO [dbo].[ProductionRequirementDetail]

([ProductionRequirementHeaderID], [SKU], [Quantity])

SELECT @ProductionRequirementHeaderID,

[SKU],

[LAMPS]

FROM OPENROWSET ('Microsoft.Jet.OLEDB.4.0','Excel 8.0; Database=C:WeeklySchedule.xls', 'SELECT * FROM [Master$C5:Q65536]') AS XL

LEFT JOIN [dbo].[PartMaster] ON (RIGHT([XL].[CODE], 7) = [PartMaster].[SKU])

WHERE [SKU] IS NOT NULL

AND [CODE] IS NOT NULL

AND [LAMPS] IS NOT NULL

AND [LAMPS] > 0

AND [LampTypeID] = @LampTypeID




I would like to remove the hardcoded reference 'Database=C:WeeklySchedule.xls' and replace it with a parameter for the filepath. Is this possible? This is in SQL Server 2000. Also, if there is a way to do this with DTS I'd be open to doing it that way too.

View 8 Replies View Related

Flat File Source-The Value Could Not Be Converted Because Of A Potential Loss Of Data

Aug 7, 2007

Hello,
I have a flat file source with ragged right format. It has three columns.

My package fails when the last column has null values.
It says "The value could not be converted because of a potential loss of data".

So tried lot changing row delimiter and column delimiter but to no avail.

So any idea on this is well appreciated.

Thanks in advance.

View 3 Replies View Related

Cannot Initialize The Data Source.. Text File Linked Server

Sep 7, 2007

Hi All,

I have this very big text file (2.5 GB - which of course I am not able to open). This resides on a server which has SQL 2005.

I have created a linked server for this text file on my SQL database, and when I try to query the table, I get an error:

Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "txtsrv".

Why am I getting this error? When I make a dummy linked server on my local machine and test the steps it all works OK. but when I go to this server where the file and it's SQL instance is lying, I get this error. Please can someone provide me with some help on this?

Many thanks,
~S

P.S. Here is how I created the linked server (I also have the Schema.ini lying under the same folder):


EXEC sp_addlinkedserver txtsrv, 'Jet 4.0',

'Microsoft.Jet.OLEDB.4.0',

'C:SSAnalysis',

NULL,

'Text'

GO

View 3 Replies View Related

How Do I Extract Data From Selected Rows From My Excel Source File?

Jun 21, 2006

The columns in my excel source contain data of different types with the column name being a string and the data in those columns being integers. Is there any way to only extract numeric data , in short I want column names to be omitted. Also the data is distributed unevenly , beggining at various rows in each column.

Thanking in advance :)

View 3 Replies View Related

XML Source And External Configuration

Jan 17, 2006

hi guys,

Is possibile configure as expression the properties XMLData and XMLdataDefinition of a "XML Source"? looking the editors it seems it is not possibile... I think it is a great limit of the component because I must hardcode the path!

Regards,

M.rkino

--
Marco Barzaghi - [MVP - MCP]
http://mvp.support.microsoft.com - http://italy.mvps.org
UGIDotNet - User Group Italiano .NET, http://www.ugidotnet.org
Read my WebLog: http://blogs.ugidotnet.org/markino

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved