Series 1 values range from 17 to 106.
Series 2 values range from 1 to 18.
Series 3 values range from 0 to 1.
When I display all three series on the chart, the value axis labels run from
1 to 120 with major unit lines at intervals of 20.
When I remove Series 1, the chart automatically adjusts itself and the
value axis labels run from 1 to 20 with lines at intervals of 2, thus
nicely accommodating the value ranges of Series 1 and Series 2.
All this is fine. But when I remove Series 2, leaving only Series 3,
the labels run from 1 to 1.2 with interval spacing of .2. Since these
values are counts, it makes little sense to show decimal values.
Can anyone provide advice on how to keep these axis labels from
showing decimal values, if a user removes Series 1 and Series 2?
I have a simple-column chart and in the x-axis I put the date values and in the y-axis the sale price values.
The chart works perfectly in the case when there is only one sale price for the same date. But, when the price changes during the same day, then there is problem. In the following example
x y
1/1/2007 6.25
2/1/2007 7
2/1/2007 4
3/1/2007 8
the chart will have three columns and in the date 2/1/2007 will display the min or max of the two values. What I need is to represent all the values i.e. the chart must have four columns , as much as the rows of the dataset
I'm trying to convert an old chart to Reporting Services. We have used the same dataset for years, it is very very simple. But it seems to me that Reporting Services can't deal with this simple dataset.
My question is: How can I get create a line chart using this dataset.
The data set consists of 1 row with 96 columns (a day divided into 96 sets of 15 minutes). Each column records how many events occurs within the 15 minutes. Along the x axis I would like to display a vertical line every 4 hours. The y axis should be numbered 0 to the highest value in the results.
I could not make this dataset any more simple than it is. But Reporting Services just chokes on this.
Here is a sample of the dataset : 1 2 0 4 5 6 7 8 9 10... 96
I created a graph which retrieves value from database.And currently,my axis is in ranged 0-10.But i have a doubt that my value in will exceed my maximum y-axis value 10..My question is, could it be possible that i make my y-axis dynamic??Thanks!!
Friends, I would like to put employee name and type of leave on the y-axis and on the x-axis the date, so that users can select the date start and end and employee/employees and see the chart or leaves. But how to do that? My fields are: Name, LeaveDescription and Date. The data with me is for each employee, for each date, leave codes are there.
I have a report where i am using line chart with date column for grouping. For X axis i have choosen the "NUmeric or Timescale Values". In the Chart the dates are displayed in this format 1/1/2007 12:00:00 AM . I don't want Time part to be shown
If possible i want it to be shown as 1-Jan. The Chart should display Point even when there is no record returned from the query.
Say DATE Column
Date AMOUNT 1/1/2007 12:00:00 AM 10 1/3/2007 12:00:00 AM 20 1/4/2007 12:00:00 AM 30
Now the Chart should plot from 1/1/2007 to 1/4/2007 including 1/2/2007
I have a chart on a report that shows value in £ on the Y Axis. The values can be both positive and negative. I would like to have the negative labels to show in red and the positive in black. What is the expression syntax to achieve this? i know it will be an IIF statement, but what is the syntax to show the Y Axis label as <0?
eg if i was doing this for a field it would be iif(Field!Fieldname.value <0, "RED","BLACK") but what would i replace the FIELD!Fieldname.vaue with so the expression would change the Y Axis label.
Is changing the display format of the Y axis of a column chart supported in the Sept CTP or is it going to be supported in the official release? For example I have built a report model with the numeric sales values set as 'C' for currency and have created a simple bar chart with year on the category axis and sales on the Y axis. The problem is that the Y axis displays as a general number (10000000) and would like to display it as a currency ($10,000,000). I can't for the life of me figure out how to display the Y axis as currency in Report Builder.
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
please excuse my ignorance but if someone could point me in the right direction i would be grateful.
i have produce a chart with some data against date points on x axis. i have another date field which i want to combine with the orignal date axis is this possible .
ie
table
results planned date Acutual date 10 02/03/07 01/03/07 46 03/03/07 03/03/07 60 06/03/07 07/03/07
i want to combine the planned date and actual date as an x axis
I have a chart that I am grouping data by Year, Month, day then Hour (this is to view server performance data) - however i need the label for the hour grouping to be in the format of HH:MM and not H:M by using expression
The values on X-axis are scaled from -100 to +100. I want to colour the band from -100 to 0 with red colour and that from 0 to +100 in green colour, and i want to provide legend for these bands/sections. How can i do this?
What is the best optimised options to display the date labels with bi-weekly intervals starting date Date from one month to three months future from the current date?
As per above requirements, I have built the below line graph query and graph, currently it only displays the date labels as per data but I need to display date labels with bi-weekly intervals starting date from one month to three months future from the current date. Also another issue found, if there are few more date labels then does not show all labels on horizontal axis.
Select /* Set Week End date as Sunday */ DATEADD(DAY, 7 - DATEPART(WEEKDAY, t.TaskBaseline0FinishDate), CAST(t.TaskBaseline0FinishDate +1 AS DATE)) as[WeekEnd] ,count(t.TaskBaseline0FinishDate) as Baseline ,count(t.TaskFinishDate) as Finish
Hello, I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties. Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable. I need to be able to change the min/max scale values based on the value of the data at run time.
I have a bubble chart created with Report Builder 3.0. I have the Y-axis series is along the left side of the chart. When all X values are positive, everything displays normally. However, if any X-axis values are negative, the whole graph shifts slightly leftward and the Y-axis title is no longer visible. It seems to be overwritten by the shifted graph or simply pushed into nondisplay area.
Is there something I can do to make the chart stay put?
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3. Â Â Set the Maximum = Â Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize  the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
I created the below graph in PowerView. The Y axis shows values in % but I want to change this to millions. How do I do this?The Y axis value is the result of a calculation that is formatted as currency in the PowerPivot Manager.
Thanks a lot for answering my previous questions. Here's one more thing that I need. I have my data in one table called as Team_Aggregate. The fields there are TeamID, Date (1st of every month), Permanent Employeed, Contractor, Open Positions, Total Employees, Max Posns.
Now, when a user selects some months data that he wants to display I want it to appear something like this -
Columns as Month Names (Jan 08 Feb 08...June 08) Rows as Team Name and each cell = Team Total for that month and the corresponding team. Can I do something like this in sql? I want to display the data on the web eventually where I am using Gridview with datasource and databind methods.
There is a view on our server that has fields for project name and then 25 months, each row contains the descriptive name and the forecasted budget in each month. I need to create a chart showing the total budget for month and a running total for the year to date. In Excel this is easy with a Pivot Chart, how do I do this in SSRS 2005?
I have a SQL view that includes the following payroll data:
Employee# PeriodEndDate HireDate Amount
What I'm trying to do is filter the data by choosing the desired period end dates and then totalling the Amount and dividing that amount to get an average daily rate. To do this I'm pulling the data from the SQL 2000 source view into Excel 2007 and creating a pivot chart.
In that pivot chart I'm able to select the desired period end dates and create a calculated field for my daily rate.
My problem is that I want to exclude employee's that have a Hire Date that is within 90 days of the latest selected period end date. For example, if the Period End dates selected are 3/15/2008 and 3/30/2008, then any employees with a Hire Date greater than 12/31/2007 (3/30 less 90 days) should NOT be included in the pivot chart.
Is there an easy way for me to do this, can I pass parameters to SQL via Excel?
It all works except that once we get to the current date, the CumulativeCompleted plateaus (as you'd expect), but the dates (x-axis) keep rolling. Now, I want the dates to roll on so I can project out a linear trendline but I want the graphing of the burndown to stop at today's date.
I want to show on Power BI Dashboard a moving average - for example, I want to always show the last 30 measurement of body temperature but it looks like Power BI dashboard shows all measurements I have and compress them - which makes the dashboard ugly.
I tried to customize the X-axis properties but I dont know what I should change the default start/stop properties to (where the default property value is automatic).
Question (X-axis): How does automatic x-axis label positioning work? Answer: Currently, built-in Reporting Services charts only allow automatic positioning in order to avoid overlapping the x-axis labels. The label direction (horizontal/vertical) of the axis labels depends on the label string sizes and the available space. X-axis labels are either shown horizontally in one line, horizontally in multiple lines with line breaks, or vertically. Showing x-axis labels at an angle, or explicit manual control over individual x-axis label positions is currently not supported.
Note There are several third-party chart add-ins that enable more control over axis labels. These add-ins can be installed on top of Reporting Services 2005.
I have exactly the problem indicated above in that some sectors of my Pie Charts I am are trying to produce are small and are close together thus labels overlap in some cases. As it says above, only automatic placing of the labels is available, but there could be a solution through third party software.
Does anyone know of a 3rd party solution/add in or a workaround?
I am able to drill down a pivot graph in sharepoint's power pivot gallery using left mouse then magnefying glass (quick explore) but how on earth do i drill up again??? Using ie back brings the original report not the last drill i was at...
Creating a burn down chart using a running total of cumulative hours with the following formula:
CumulativeHoursLeft:=CALCULATE ( Â Â Â SUM('Projects'[Budget hours]) - SUM ( 'hours'[Hours] ), Â Â Â FILTER ( Â Â Â Â Â Â Â ALL ( 'hours'[Date] ), Â Â Â Â Â Â Â 'hours'[Date] <= MAX ('hours'[Date]) Â Â Â ) )
Works great except that in a Line Chart using [Date] as the Axis and CumulativeHoursLeft as the value, I get these spikes on days for which the employee reported no hours. I do know what exactly the measure is doing in this instance and I do not get this in a table, those dates simply do not appear. I have tried both Categories and Continuous for the Line Chart. I have also tried filtering where [Date] is not blank.how to get rid of the spikes?
I'm a relative newcomer to Power View. I've been playing with charts and have been struggling to combine both line and bar on the same chart. It would appear this functionality is not available. Considering this is basic functionality when it comes to charting, how to achieve this....
Hi, assuming a data driven web application was written, and it is used by a huge number of customers, we can set up some load balancing infrastructure, where multiple web servers run to process all requests. In this case, the database might run on its own machine. But what can be done if one machine is not enough for the database anymore? Is it possible to build some kind of database cluster? And if yes, how does the application work with such a cluster? Is there still ONE connection string or is it needed to query multiple SQL servers? Long story short; Can a SQL Server database cluster be handled as ONE SQL Server instance from outside, even it is hosted on multiple machines?And if yes, what edition of SQL Server 2005 is required? RegardsMarco Buerckel
