I am getting this error message "Replication-agentclassname: agent F1TESTSQLSERVER20-ELC-ELC_Pub-F1TESTSQLExpress-39 failed. Executed as user: . A required privilege is not held by the client. The step failed." All the users replication agents have failed and I am looking on how to resolve this serious error. Where do I start? I am using merge replication.
Thanks!
SAM
I keep getting this error message on the subscription execution, even though the account is a domain administrator. Both publisher and subscriber are on the same domain. Can someone tell me what is the problem?
Message
Replication-Replication Distribution Subsystem: agent [Agent Name] failed. Executed as user: [Domain]administrator. A required privilege is not held by the client. The step failed.
Regards,
I running SSIS package job without sql agent , it is working fine.when i am running through sql agent not running.
created Proxy account
job failed and give above error.
Server is cluster and taking data from desktop.
server is in one domain and desktop in another domain.
I'm using our development ID to set up peer-to-peer replication. I am following the steps outlined in the BOL using SQL Studio 2005. When I created the initial publication, I read the section on permissions and assigned the development login ID db_owner. Indeed, to eliminate any possible issues (I thought), I gave it db_datareader, db_datawriter, and all the db admin rights and made very sure the db_denydatareader and db_denydatawriter roles were not checked. I did this through the Logins section of the Security folder and applied the same rights to both the distribution and the publication database. Nevertheless, when I run the LogReader agent job, it fails with the message for step 2 that:
Executed as user: ourdomsqldev. A required privilege is not held by the client. The step failed.
The dev ID essentially has sa rights to the server and all the databases. It is also a domain authenticated ID. Any ideas what's causing this problem? I really need to get the replication going reliably before the weekend is out.
Thanks.
Randy
I get the following error when I try to run my scheduled job.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any ideas Thanks in advance
Reddy
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
View 2 Replies View RelatedHi all help needed from your End.
I have a re-indexing stored procedure,yester day night it got failed
"Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
what may be the reason..
when i right click and execute the package from the Management Studio, it runs fine, everytime. When i schedule a job to execute it, it fails, everytime.
"The package execution failed. The step failed."
i have made sure that the package and job ran using credentials with more than enough access to everything. Still, with no luck. PLEASE! I am at my wits ends here, and the boss is getting antsey...
Any and all help is greatly appreciated...
Anthony
Hi,
I am working on SQL-Server 2000 (developer edition) with SP3 on Win 2000 and Clients are Win98/Win XP.
I am not able to 'Step Into' my SQL Procedure code in Debug mode, executed from Query Analyzer from a client machine. As soon as I select the 'Execute' button after inserting all the parameters value, the whole procedure gets executed. But I'm able to do the same (i.e 'step into') from the Server itself.
Do I need any additional configuration settings in the client machine ??
I shall be greatful if anyone can help me to solve the above problem.
Thanx in advance.
Surajit
Hy
I want to ask, that I have a MS SQL 2000 Enterprise edition server. How much memory required per client. I know, the SQL system memory required (more 1 G) but my question is, if my SQL server use plus one client, how much memory must take in my blade?
pls help
I have a biztalk db server where I have few job steps. The log bkp job steps which the below error but when I go to the location of backup/checking the msdb backupset table I can see the backup file.
[SQLSTATE 01000] (Error 4035) BACKUP LOG successfully processed 1 pages in 0.010 seconds (0.146 MB/sec). [SQLSTATE 01000] (Error 3014)
Hi friends,
please help me with my urgent needs.
I have created a job. This job contains 6 steps.
All steps are sql querries.
In step no:3 i have an if condition in the script.
When the condition becomes true i have to run the script.
That is ok.
But the problem is when the condition becomes falls i have
to go to the step no 6 and at the same time the status
of step no:3 should be like "failed".
can you help me please
Please this is an urgent reqirement.
Thank you.
i have a sql server job scheduled to run daily twice.the job is running fine , but once or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'. The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'. The step failed."
View 2 Replies View Related
Hi All
I have job with three steps
Step1.Alter database <xxxxx> set recovery simple
Step2 DTSrun /....../........
Step3.Alter database <xxxxx> set recovery full
GO
Use XXXXX
GO
dbcc shrinkfile (XXXXX_Log, 200)
Up to yester day my Job ran fine today job got failed at Step1
Executed as user: CLUSTURsa_admin. The log file for database '<xxxxx>' is full. Back up the transaction log for the database to free up some log space. [SQLSTATE 42000] (Error 9002) Could not write a CHECKPOINT record in database ID 3 because the log is out of space. [SQLSTATE 01000] (Error 3619). The step failed
some body help me what to do now,
changing recovery model also needs space?(Simple to Full/Full to Simple)
I am writing a little systems monitoring application to send SMS
messages to my mobile phone. For example when disk space reaches a
certain maount my program will raise an alert that fires a VB app,
that sends a SMS message directly to my mobile.
We operate an active/active cluster (SQL7 NT4) and I want to be informed
when one of the clusters fails over.
I have managed to find out when the clusters are 'off-line' by reading
the 'PersistentState' variable from the registry as follows:
DECLARE @LIVE_REPonV1 varchar(8000)
EXEC master..xp_regread
@rootkey='HKEY_LOCAL_MACHINE',
@key='ClusterGroupsd42a2a2d-f6a5-11d4-a584-00508bdfa98a',
@value_name='PersistentState',
@value= @LIVE_REPonV1 OUTPUT
SELECT convert(varbinary,@LIVE_REPonV1)
this has a value of 0x01000000 for on-line and 0x00000000 for
off-line.
However, after scanning the registry I cannot find a registry variable
that resembles a 'failed-over' status.
Any help would be most appreciated.
I have tried to install Outlook 2007 with BCM and recieve the error listed above. I have also included a copy of my log file. Any suggestions?
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Thu Aug 23 14:22:59 2007
Machine : MACBOOK
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : MACBOOK
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : MACBOOK
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : MACBOOK
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_MSXML6_1.log
Error Number : 1603
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Thu Aug 23 14:23:45 2007
List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_Core(Local).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_SQLSupport_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_SQLNCLI_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_SqlWriter_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_MSXML6_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_SNAC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0010_MACBOOK_SCC.log
I Don't understand what this means: Everytime I try and install the disc 2 of my Office Small Business 2007, it gives the same message. Help.
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Home Edition (Build 6000)
Time : Tue Jul 03 17:14:45 2007
Machine : SWANNER-PC
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Failed
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_SQLSupport_1.log
Error Number : 1618
--------------------------------------------------------------------------------
Machine : SWANNER-PC
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Failed
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_SQLNCLI_1.log
Error Number : 1618
--------------------------------------------------------------------------------
Machine : SWANNER-PC
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.3042.00
Install : Failed
Log File : c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_SqlWriter_1.log
Error Number : 1618
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Tue Jul 03 17:15:12 2007
List of log files:
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_Core(Patched).log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_SQLSupport_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_SQLNCLI_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_SqlWriter_1.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_Datastore.xml
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_.NET Framework 2.0.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_Support.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_Core.log
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
c:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_SWANNER-PC_SCC.log
Attempting ODBC connection to SQL Server by MachineNameSqlServerName doesn't work.
Can only connect by using IP address of server machine with name of SQL Server instance.
Any help would be appreciated.
thanks
Hi All,
Please let me know where can i find the sample files and rs2005sbsDW database in msdn library as i dont have CD provided along with the book.
Please give me the link of the sample files so that i can download it for testing the sample application.
Regards,
Prabhanjana
is there such a paper? if so, can you pls point me to it? thx in advance
View 4 Replies View Relatedhye everyone,
after finished do the report and deploy at IIS/report manager in local pc..
i want to know , what is the step /how to deploy the report project at the user's pc/ client pc /other server..
thanks in advance
thank you very much
I want to convert .rdl to .rdc need full steps.Actually i created .rdl report using sp sucessfully.Now i want to convert it to rdlc while doing it iam getting some authentication error and some thing else.I created rdl in 2008 and i want to change it to rdlc 2010.
View 5 Replies View RelatedI have a package that has multiple data flow tasks. At the end of a task, key data is written into a raw file (file name stored in a variable) that is used as a data source for the next task. Each task requires a success from the preceding task.
Here's the rub:
If I execute the entire package, the results of the package (number of records of certain tasks) differs significantly from when I execute each step in the package in turn (many more records e.g. 5 vs 350).
I get the feeling that the Raw file is read into memory before it is flushed by the previous task, or that the next task begins preparation tasks too early.
Any help is greatly appreciated.
I am running on Server 2003 64 (although the same thing happens when deployed on a Server 2003 32 machine)
Thanks
B.
All,
I was trying to install SQL Server 2005 on Windows 2003 Server and it failed on installing one of the components "SQL native Client",
the Error message is
The Installation Package of the Product Microsoft SQL Server Native Client cana not be found. Try the Installation again using the Valid copy of the installtion package "sqlncli.msi"
Thx
Hi!
I hope the answer is as simple as the question -- but after reading all the documentation I could find (understand?) and a lot of posts here, I'm no closer to achieving the goal.
I have a Visual C# app, DAYTRACKER, developed in VS2005. It uses a database with several tables constructed using SQL Server 2005 Developer Edition.
I want to deploy the app plus the database plus SQL Express to another machine, to be used by a single user (the administrator) with no need for network connectivity of any kind.
What I have so far is:
1. The application is successfully deployed from a CD-ROM, having used the Publish process within VS2005, and opens on the new machine -- without database connectivity, however.
2. SQL Express is successfully deployed (it deployed as a 'prerequisite' when I went through the Publish process in VS2005)
3. I manually copied the database's .mdf and .mdl files, using SQL Server Managers 'Copy Database' function, then transferred the copies to the new machine into the ..MSSQL.1MSSQLdata folder (where they appear along with the master.mdg, mastlog.ldf etc files)
Now, the DAYTRACKER application's DAYTRACKERConnectionString under 'Settings' in the VS2005 studio reads 'Data Source=DELL3;Initial Catalog=DayTracker;Integrated Security=True' (which are the appropriate parameters for the machine, DELL3, on which I wrote the program.)
The problem, of course, is that SQL Express on the new machine doesn't connect the application to the database. When I go to the 'SQL Server Configuration Manager' and go to the 'SQL Server 2005 Services' and double-click on the 'SQL Server (SQLEXPRESS)' icon (the service is running) and the user is logged on using 'Local System Account'. Under the 'Service' tab the Host Name is 'MUSIC' (which is the name of the new machine I've installed the app onto -- which of course is not the name - DELL3 - that the app's connection string is expecting). Under the 'Advanced' tab, I've tried correcting the name of the Startup Parameters default .mdf and .mdl entries to ..DayTracker.mdf and ..DayTracker_log.mdl, but the server won't start up after I make the changes.
What I'm hoping for: a step-by-step way of doing this type of deployment, preferable getting it all onto one CD-ROM, and installing it on the new machine so that it all works seamlessly from the start, not requiring any 'tweaking' of the SQLServer Express settings by the end-user.
But I'll take pretty much anything that fixes the specific db connectivity problem I've described.
Thank you very much.
John F.
hi all, have anyone else met with the following problem.we've got a SQL2000SP3a on a 2 active-active node clusters of W2K3,this cluster in using AD.I've found that whenever I use Enterprise Manager on my local computerto register the above instance, it will constantly produce "Failedlogin for <Domain><DomainUser>" errors in the Windows Security Log ofthe database server machine. There's no failed login in the SQL errorlog and I can work normally with the Enterprise Manager. The OS failedlogins error are gone once I un-register the instance from myEnterprise Manager.Does anyone know or met with this before?
View 1 Replies View Related
We are having problems getting the ADO.NET client to failover in a timely manner in a web application. Here's what happens:
1) Database fails over in 3 to 5 seconds
2) Clients attempt to login to primary and receive SQL server not available errors
3) The clients slowly start to connect and succeed without errorson the secondary.
4) We are still see SQL Server login errors on the primary, even after the failover
5) When we failback to the primary, it all happens within a few seconds (no problems)
If we recycle IIS, this problem goes away
Here's what we have tried
1) Turning off connection pooling (has no effect). We also can see the connections get killed on the primary server
2) Applying this hotfix (http://support.microsoft.com/kb/944099)
And yes, we are running a script to sync up the SIDS so that doesn't appear to be a problem. What seems to be happening is the primary server is getting stuck in the ADO.NET application memory. The problem is we don't know how to fix it.
BTW, our hardware is SQL Server 2005, Windows Server 2003, .NET 2.0 (and .NET 3.5)
Let me know if you need additional information. Thanks in advance
One of my co-worker changed the sa password today. After that we are getting this error. The SA account gets locked every time. Even within few seconds of unlocking the SA account, it gets locked again. Error message is not clear as what session still using old password and causing the SA account to get locked? Any of our application does not use SA user to connect to databases. We have Tivoli installed on the same system and the GUI of tivoli has the correct password.
Shailesh
On computer 1, I am programming a C# utility to connect to a SQL 2005 SP2 Database. Here is the connection string.
Server=serverName;Database=database;User Id=DOMAIN/DomainAccount;Password=password;
I am using Visual Studio 2005 with .NET 2.0.
I have logged into Computer 1 with a different account. When I run the utility, I get a login failed exception. Here is the error I get from SQL 2005.
Login failed for user 'DOMAIN/DomainAccount'. [CLIENT: xxx.xxx.xxx.xxx].
Error: 18456, Severity: 14, State: 6.
xxx are filled with the valid IP address of the computer I am running the utility from.
When I log into the computer 2 with the same domain account, it runs with success.
Login succeeded for user 'DOMAIN/DomainAccount'. Connection: trusted. [CLIENT: xxx.xxx.xxx.xxx]
When I put Trusted_Connection=True; in the connection string, it connects as me and not the domain user I want to connect to.
When I put Integrated Security=SSPI; in the connection string, it does the same thing.
I have .NET Framework 2.0 and Visual studio 2005 installed on my machine. I also have SQL Server 2000 Developer Edition installed with Service Pack 4.
When I try to install SQL Server 2005 express, I get an error when the setup tries to install SQL Native Client. I have read many forums, but couldnt find a resolution. I can not see SQL Native Client in my Add Remove Programs either.
I tried to unzip the SQLEXPR.exe into a temp folder and when I right click sqlncli.msi and say Repair or Uninstall. It says "This action is valid for products that are currently installed."
When i try to run the sqlncli.msi file ..i get an error message saying "Installation of Microsoft SQL Server Native Client failed because a higher version already exisits on the machine. To proceed uninstall the higher version and then run Microsoft SQL Server Native Client Setup"
Please help as I am unable to install SQL Server 2005 Express....
SQL Server Native Client -- Set up failed
SQL VSS Writer -- Set up failed
Database Services -- Set up failed
Thank you in advance
Log mesg -==
Verbose logging started: 12/17/2007 23:18:36 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (74:B4) [23:18:36:828]: Resetting cached policy values
MSI (c) (74:B4) [23:18:36:828]: Machine policy value 'Debug' is 0
MSI (c) (74:B4) [23:18:36:828]: ******* RunEngine:
******* Product: {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
******* Action:
******* CommandLine: **********
MSI (c) (74:B4) [23:18:36:828]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (74:B4) [23:18:36:828]: Grabbed execution mutex.
MSI (c) (74:B4) [23:18:36:828]: Cloaking enabled.
MSI (c) (74:B4) [23:18:36:828]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (74:B4) [23:18:36:828]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (100) [23:18:36:828]: Grabbed execution mutex.
MSI (s) (10:E0) [23:18:36:843]: Resetting cached policy values
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'Debug' is 0
MSI (s) (10:E0) [23:18:36:843]: ******* RunEngine:
******* Product: {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
******* Action:
******* CommandLine: **********
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (10:E0) [23:18:36:843]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (10:E0) [23:18:36:843]: User policy value 'DisableMedia' is 0
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Looking for sourcelist for product {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Adding {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Now checking product {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Media is enabled for product.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing net source list.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing media source list.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Trying media source G:.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 2203 2: G:sqlncli.msi 3: -2147287038
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing URL source list.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1402 2: UNKNOWNURL 3: 2
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Failed to resolve source
MSI (s) (10:E0) [23:18:36:843]: MainEngineThread is returning 1612
MSI (c) (74:B4) [23:18:36:859]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (74:B4) [23:18:36:859]: MainEngineThread is returning 1612
=== Verbose logging stopped: 12/17/2007 23:18:36 ===
Hi,
I have to transport a big database table and can't read it at once with "select * from table" because the table is bigger than my system memory.
Is there a way to read the table step by step? I thought it was possible with ADO and his serverside cursors but I don't now how. I need an "universal" solution that works on SQL Server 2000/2005, MySQL and Oracle.
Regards,
harry
Connecting to a networked SQL Server Box from my local machine
Open Query Analyzer from Start menu, logging in using sa account.
from the object browser i select my stored procedure (WEA_InsertClaim) - right click and select Debug.
i am prompted to enter the parameter values, which i do, auto rollback checkbox is checked - click Execute.
T-SQL Debugger opens and runs through the stored procedure.
but only buttons enabled are the "Go", "Toggle Breakpoint", "Clear All Breakpoints"
so i can set breakpoints etc. but when i select Go it will not stop at the breakpoints it just runs through the stored procedure from start to finish. giving the correct return code as its output
is there something i need to enable in order to make it stop at breakpoints??
Cheers,
Craig
Hi Friends,
I am getting the below error while installing CSF DevLite edition on
Following is the breif Info
Server Is : Win2003
SQL SERVER 2005 Installed on Same PC
Domain Name is : Test
User : Administrator he is a build in Admin,
PLEASE HELP ME!!!! Thanking in advance.
EVENT LOG 1:
Login failed for user 'TESTadministrator'. [CLIENT: <local machine>]
EVENT LOG 2:
The description for Event ID ( 11609 ) in Source ( MsiInstaller ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Product: Microsoft Connected Services Framework 3.0 Developer Edition Lite -- Error 1609.An error occurred while applying security settings. Power Users is not a valid user or group. This could be a problem with the package, or a problem connecting to a domain controller on the network. Check your network connection and click Retry, or Cancel to end the install. Unable to locate the user's SID, system error 1332, (NULL), (NULL), (NULL).