Please Help! Stored Proc Acting Odd
Jul 28, 2000
I am so confused. I hope someone can help! I wrote a large stored procedure that is meant to be called from a VB application. The store procedure collects data from several tables and buildsa new table of summary data. It is called with 4 parameters (date ranges and names for the new summary tables to create).
I tested the SP in SQL 7 while developing it, and never had any problems. But when I tried it in 6.5, it complained that I had too many subqueries. So I rewrote the procedure with less nestings, and then when I tried it I didn't get an error but it crashed with a DB Disconnected error.
I rewrote it again and then it finally worked (but only from Enterprise Manager); when I called from a VB application (using ADO), I get an error "protocol error in TDS stream." And looking in the SQL error log I see a whole lot of errors, none of which I understand, but the first mesage is "EXCEPTION_ACCESS_VIOLATION raised, attempting to create symptom dump.
I know that without knowing the contents of the stored procedure, there's no way anybody can tell me exactly what's going wrong, but I'm sure hoping that some people can give me some clues or directions to look. I'm desperate and have been working on this one project for too long already!
Thanks for any help or insight you can offer.
View 1 Replies
ADVERTISEMENT
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Feb 20, 2003
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
View 1 Replies
View Related
Jan 13, 2006
Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
View 5 Replies
View Related
Jan 20, 2004
Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
View 14 Replies
View Related
Aug 30, 2007
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
View 2 Replies
View Related
Oct 14, 2007
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies
View Related
Apr 23, 2008
Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
View 1 Replies
View Related
Jul 12, 2007
I have built a DTS package in SQL Server 2000 to Delete all rows from a table and then import from another table. I have scheduled it run twice a day and everytime it runs, it does not delete anything but imports all the records from another table. So when its done, I have twice the number of records in my final table. Then I go back to the server and execute the package manually and it works perfect. It deletes all and then imports new. I have enabled package logging and it shows both the steps executed perfectly (even when it executes on scheduled time).
What can be the problem?
Thanks,
Bullpit
View 1 Replies
View Related
Sep 22, 2006
When I run this code on a column of the type float or real it's ok, but not if the column is decimal, why?
this produces an error:
SELECT IsNull(column1,'') as column1
FROM mytable
---
this code works:
SELECT IsNull(column1,0) as column1
FROM mytable
---
The problem is that this query is used in a C++ environment to build an insert into another table. The query is build together in a CString.
C++ considers a CString to have ended if it encounters a NULL, therefore I need the check on all columns.
The error message I get is:
"Error converting data type varchar to numeric."
Why is it ok to use float or rel, but not decimal??
View 1 Replies
View Related
Jan 20, 2004
MY DATABASE FOR SHOPPING CART IS ACTING STRANGE IT HAS AUTOMATICALLY DESTOYED ALL PRIMARY KEYS. AND HAS CREATED 4 DUPLICATE RECORDS FOR EACH RECORD SO AT THIS STAGE I HAVE AROUNG 15000 RECORDS IN EACH TABLE IT MEANS 15 TIMES 4 60000 RECORDS. CAN ANYONE UPDATEME WHY THIS HAS HAPPENED AND WHAT CAN BE DONE TO DELETE EXISTING DUPLICATES. I NEED FAST REPLY IN THIS MATTER AS THIS IS URGENT. IF POSSIBLE KINDLY WRITE QUERIES TRIGGERS FOR FUTURE PROBLEMS AS WELL AS THESE DAYS I AM SICK SO MY BRAIN AINT WORKING IN THIS MATTER. URGENT URGENT URGENT THANKS ALOT I HAVE PREVIOUSLY POSTED AND HAVE GOT A GOOD RESPONSE. AND HOPE A GOOD ONE AGAIN. ONE MORE THING IS THAT I HAVE A BACKUP HERE AT MY OFFICE SYSTEM IT ALSO HAS DONE THE SAMETHING. I MADE A NEW DATABASE AND TRYED TO IMPORT DATA WITH DISTINCT KEYWORD BUUT IT IS NOT COPYING IT AS WELL. URGENT RESPONSE REQUIRED IF ANYONE CAN DO.
View 9 Replies
View Related
Jul 20, 2005
I have MSSQL2k SP3a on WIN2k SP4.moved a Date/log files to this server about a week ago from a SQL7serverand attached it to this new Sql2k server.everything works fine for about 24hrs and then it starts timing out !!all I have to so is restart the MSSQL service and works fine againtill the next day !there is only this one database on this server and nothing else isrunning on it.have anyone seen this before ? how could this be fixed !!thanksDon
View 4 Replies
View Related
Jan 2, 2008
Happy new year all SSIS Experts,
I wonder if anyone can explain what I am doing wrong here:
I need to transport data between several tables using dataflow components. I need to wrap this in transactions to either succeed or fail completly, I do want to use my own BEGIN TRAN and COMMIT TRAN statements, not the transaction support built into SSIS.
As written in several BLOGs, I should set the "RetainConnection" property to "TRUE" to make sure each dataflow runs on the same connection as the BEGIN and COMMIT statements... and that seems to be random.
Sometimes they do run on the same connection, but I also logged (using SQL Profiler) package executions where the BEGIN TRAN was issued to SPID different than the one used in first dataflow, another SPID again for the second dataflow and finally yet another for the COMMIT... in this case COMMIT fails with "needs an open transaction".
Any idea what is wrong there?
Cheers!Ralf
View 1 Replies
View Related
Jul 14, 2007
Hi,
I have a strange problem with a sql table.
One of my table, dbo.Customer, gives me different values of "row count" everytime I check the properties.
The dbo.Customer have around 12 000 rows but when I check the properties (or open the table) the value always differs. The table row count can have any value from ~9000 - 12000.
Its like the table are trying to load all rows but cant.
Anyone have any idea what the problem can be?
View 1 Replies
View Related
Jan 3, 2008
Hi,I have a problem with the execution of a vb-procedure that should do 2 updates of databasetables.The procedure runs when the eventhandler registrates that I want make an update within the <asp:detailview..>-controll.But I get the errormessage: End-Of-Command requestedThis is the procedure:Public Sub myDetails_Update(ByVal sender As Object, ByVal e As System.EventArgs) handle DetailsView1.Databound Dim conn As New SQLConnection("Data Source=.SQLEXPRESS;AttachDbFile=C:Pferdeservice KarleApp_dataPferde.mdf;Integrated Security=True Connection Timeout=30;User Instance=True") conn.open() Dim cmd As New SqlCommand() Dim cmd1 As New SqlCommand() cmd.Connection = conn cmd.CommandText = "UPDATE News_Kultur set Header = @Header, Ueberschrift_D = @Ueberschrift_D, Ueberschrift_E = @Ueberschrift_E, Text_D = @Text_D, News_Kultur.Text_E = @Text_E"WHERE (((News_Kultur.ID)=@ArtikelID))" cmd.CommandType = CommandType.Text cmd1.CommandText = "UPDATE News set Datum= @Datum WHERE ID=@NewsID" cmd1.CommandType = CommandType.Text cmd.Parameters.add("@Headers", SqlDbType.nvarchar, 50) cmd.Parameters.add("@Ueberschrift_D", SqlDbType.nvarchar, 50) cmd.Parameters.add("@Ueberschrift_E", SqlDbType.nvarchar, 50) cmd.Parameters.add("@Text_D", SqlDbType.Text) cmd.Parameters.add("@Text_E", SqlDbType.Text) cmd.Parameters.add("@ArtikelID", SqlDbType.Int) cmd1.Parameters.add("@Datum", SqlDbType.Datetime) cmd1.Parameters.add("@NewsID", SqlDbType.Int) cmd.Parameters.add("@Headers").value = DirectCast(DetailsView1.FindControl("Headers"), TextBox).Text cmd.Parameters.add("@Ueberschrift_D").value = DirectCast(DetailsView1.FindControl("Ueberschrift_D"), TextBox).Text cmd.Parameters.add("@Ueberschrift_E").value = DirectCast(DetailsView1.FindControl("Ueberschrift_E"), TextBox).Text cmd.Parameters.add("@Text_D").value = DirectCast(DetailsView1.FindControl("datumTextbox"), TextBox).Text cmd.Parameters.add("@Text_E").value = DirectCast(DetailsView1.FindControl("datumTextbox"), TextBox).Text cmd.Parameters.add("@ArtikelID").value = DirectCast(DetailsView1.FindControl("datumTextbox"), TextBox).Text cmd.ExecuteScalar() cmd1.Parameters.add("@Datum").value = DirectCast(DetailsView1.FindControl("Headers"), TextBox).Text cmd1.Parameters.add("@NewsID").value = DirectCast(DetailsView1.FindControl("Headers"), TextBox).Text cmd1.ExecuteScalar() conn.close()End Sub Regards
View 6 Replies
View Related
Dec 18, 2007
Hi Peeps
I have a SP that returns xml
I have writen another stored proc in which I want to do something like this:Select FieldOne, FieldTwo, ( exec sp_that_returns_xml ( @a, @b) ), FieldThree from TableName
But it seems that I cant call the proc from within a select.
I have also tried
declare @v xml
set @v = exec sp_that_returns_xml ( @a, @b)
But this again doesn't work
I have tried changing the statements syntax i.e. brackets and no brackets etc...,
The only way Ive got it to work is to create a temp table, insert the result from the xml proc into it and then set @v as a select from the temp table -
Which to be frank is god awful way to do it.
Any and all help appreciated.
Kal
View 3 Replies
View Related
Feb 22, 2008
I am trying to import some data from csv files. When I try it using bulk insert I get a conversion error. When I use the exact same format file and data file with an openrowset it works fine. I would prefer to use the BULK insert as I can make some generic stored procedures to handle all my imports and not have to code the column names in the SQL. Any suggestions?
BULK Insert stuff
From 'c:projects estdatalist.txt'
with
(FORMATFILE='c:projects estdatamyformat.xml')
insert into stuff (ExternalId, Description, ScheduledDate, SentDate, Name)
select *
from OPENROWSET (BULK 'c:projects estdatalist.txt',
FORMATFILE='c:projects estdatamyformat.xml')
as t1
The destination table has more columns than the data file. The Field IDs represent the ordinal position of the columns in the destination table. Column 1 in the destination table is an int identity. The conversion failure is from trying to convert column 5 to int which makes me think bulk insert is ignoring the name attributes in the XML and just trying to insert the columns into the table in order without skipping.
<?xml version="1.0"?>
<BCPFORMAT xmlns="http://schemas.microsoft.com/sqlserver/2004/bulkload/format" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RECORD>
<FIELD ID="2" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="12"/>
<FIELD ID="5" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="200" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="7" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="24"/>
<FIELD ID="8" xsi:type="CharTerm" TERMINATOR=" " MAX_LENGTH="24"/>
<FIELD ID="9" xsi:type="CharTerm" TERMINATOR="
" MAX_LENGTH="500" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
</RECORD>
<ROW>
<COLUMN SOURCE="2" NAME="ExternalId" xsi:type="SQLINT"/>
<COLUMN SOURCE="5" NAME="Description" xsi:type="SQLVARYCHAR"/>
<COLUMN SOURCE="7" NAME="ScheduledDate" xsi:type="SQLDATETIME"/>
<COLUMN SOURCE="8" NAME="SentDate" xsi:type="SQLDATETIME"/>
<COLUMN SOURCE="9" NAME="Name" xsi:type="SQLVARYCHAR"/>
</ROW>
</BCPFORMAT>
View 1 Replies
View Related
Apr 30, 2007
Hi, all experts here,
Thanks a lot for your kind attention.
I am having quesion about attributes acting as both inputs and predictive outputs in a mining models, I mean if we are going to predict the outputs, then I cant actually see the effects of themselves acting as inputs as well?
I dont really see through the points of it.
Could please any experts here shed me any light on it.
I am looking forward to hearing from you shortly and thanks a lot in advance.
With best regards,
Yours sincerely,
View 6 Replies
View Related
Jul 20, 2015
In my environment always on is there. Today I observed that primary server fail over to secondary server .now the secondary server acting as primary role.
Can I know when is fail over is happened and who did the fail over. Is there any script to find this?
View 4 Replies
View Related
Aug 23, 2007
When you create a Stored procedure, is it automatically stored under the default Filegoup?
How can I see under which Filegroup my Stored Procedures and Triggers are stored?
View 2 Replies
View Related
Mar 10, 2005
I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
FOXPRO employee.dbf InsertTrigger:
employee_insert_trigger(VAL(Employee.ep_pk),Employ ee.fname,Employee.lname,Employee.email,Employee.us er_login,Employee.phone)
FOXPRO corresponding Stored Procedure:
FUNCTION EMPLOYEE_INSERT_TRIGGER
PARAMETERS wepk,wefname,welname,weemail,WEUSERID,WEPHONE
nhandle=SQLCONNECT('SS_PDITHP3','userid','password ')
IF nhandle<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nhandle<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
RETURN
ENDIF
nquery="exec ewo_sp_insertNewEmployee @WEPK ="+STR(wepk)+",@WEFNAME ='"+wefname+"',@WELNAME ='"+welname+"',@WEEMAIL ='"+weemail+"',@WEUSERID ='"+weuserid+"',@WEPHONE='"+wephone+"',@RETCODE =0"
nsucc=SQLEXEC(nhandle,nquery)
SQLDISCONNECT(nhandle)
IF nSucc<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nSucc<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
ENDIF
RETURN
SQL SERVER Stored Procedure called from FOXPRO Stored Procedure
CREATE procedure ewo_sp_insertNewEmployee (
@WEPK int,
@WEFNAME char(20),
@WELNAME char(20),
@WEEMAIL char(50),
@WEUSERID char(15),
@WEPHONE char(25),
@RETCODE int OUTPUT
)
AS
insert into WO_EMP (
WE_PK,
WE_FNAME,
WE_LNAME,
WE_EMAIL,
WE_USERID,
WE_PHONE
)
VALUES (
@WEPK,
@WEFNAME,
@WELNAME,
@WEEMAIL,
@WEUSERID,
@WEPHONE
)
IF @@ERROR <> 0
BEGIN
SET @RETCODE=@@ERROR
END
ELSE
BEGIN
-- SUCCESS!!
SET @RETCODE=0
END
return @RETCODE
GO
View 2 Replies
View Related
Jul 19, 2007
Im trying to perform an update with a stored procedure thats all working but
an exception is thrown ....violation of primary key contraint....cannot insert duplicate pri key
I understand whats going on but how do you update some ones details if its protected this way.
?
View 3 Replies
View Related
Feb 22, 2008
I have a stored procedure , where i want to return identity column after insert but before insert i want to check if the record exist then select its identity value to return , after select statement it is retutrning null CREATE PROCEDURE SP_Attendance1 (@DIVISIONID int,@EMPLOYEEID int,@CALLDATE datetime,@RECEIVEDDATE datetime,@DOC datetime,@SYSTEMNAME VARCHAR(20),@DELETED int,@attendanceID int output) AS---DECLARE @ID intIF EXISTS (SELECT ID FROM TBLATTENDANCE WHERE EMPLOYEEID = @EMPLOYEEID AND YEAR ( CALLDATE ) = YEAR ( @CALLDATE)AND MONTH (CALLDATE) = MONTH ( @CALLDATE) AND DAY (CALLDATE) = DAY ( @CALLDATE) )BEGIN SET @attendanceID = SCOPE_IDENTITY()END ELSE BEGIN INSERT INTO TBLATTENDANCE (DIVISIONID ,EMPLOYEEID ,CALLDATE , RECEIVEDDATE ,DOC,SYSTEMNAME ,DELETED )VALUES (@DIVISIONID ,@EMPLOYEEID ,@CALLDATE , @RECEIVEDDATE ,@DOC,@SYSTEMNAME ,@DELETED ) ;SELECT DIVISIONID, EMPLOYEEID, CALLDATE, RECEIVEDDATE, DOC, SYSTEMNAME, DELETED,ID FROM TBLATTENDANCE WHERE (ID = SCOPE_IDENTITY())SELECT @attendanceID = SCOPE_IDENTITY()ENDGO Kindly help with this
View 5 Replies
View Related
Jan 15, 2004
Hi,
I am trying to create a stored proc, that delivers a recordset, per the user requirements BUT,
I want to create a Geneirc search Proc that can handle a few criteria
I was wondering if it is possible to create a VB like Select case
depending on Information supplied to the stored proc
i.e
@Loc_Thing
@Loc_OtherThing
SELECT FirstName,LastName,CIty,Job,,Company,Webpage FROM RECORDSET WHERE
Select case @Loc_Thing
Case "Mickey"
LastName = @Loc_OtherThing
Case "Walt"
Company = @Loc_OtherThing
...... etc
is it possible to create a strored proc like this?
I have found a Select case in SQL, but it doesn't work I would like it?
Any Idea's?
View 1 Replies
View Related
Nov 29, 2004
Hello,
So I created my first SP today which returned data to populate a datagrid. Worked to perfection. Now I'm trying to do a simple login and I'm having a hard time getting it together. I want the user to enter in a username and pass then if user exists, to return their userid and update their last login date. But I can't get it. Any help would be awesome.
Here's my SP...
CREATE PROCEDURE [dbo].[userLogin] @username varchar(50), @pass varchar(50) AS
declare @x int
declare @userid int
if exists (SELECT userid FROM users WHERE username = @username AND password = @pass)
set @x = 1
else
set @x = 0
if @x = 1
UPDATE users SET lastlogin = getdate() WHERE userid = (SELECT userid AS name FROM users WHERE username = @username AND password = @pass)
else
return '0'
if @x = 1
SET @userid = (SELECT userid FROM users WHERE username = @username AND password = @pass)
return @userid
GO
Any constructive criticism on my SP is welcome. Also, should I be using Print or Return if I want to send back a value to my VB code?
And my VB:
Dim user As String = txtUsername.Text
Dim pass As String = txtPassword.Text
Dim objDataSet As DataSet
Dim objAdapter As SqlDataAdapter
Try
Dim cmd As New SqlCommand
'Enter Param's here
Dim myParam1 As SqlParameter = cmd.Parameters.Add("@username", SqlDbType.VarChar)
Dim myParam2 As SqlParameter = cmd.Parameters.Add("@pass", SqlDbType.VarChar)
myParam1.Value = user
myParam2.Value = pass
objAdapter = New SqlDataAdapter
objAdapter.SelectCommand = cmd
objAdapter.SelectCommand.Connection = SqlConn
objAdapter.SelectCommand.CommandType = CommandType.StoredProcedure
objAdapter.SelectCommand.CommandText = "userLogin"
SqlConn.Open()
Dim str As String = cmd.Parameters("@userid").Value()
cmd.ExecuteNonQuery()
If str = "0" Then
'Error Login Page
Response.Redirect("login_err.aspx")
Else
Session("userid") = str
Response.Redirect("home.aspx")
End If
SqlConn.Close()
Catch ex As SqlException
SqlConn.Close()
End Try
View 4 Replies
View Related
Feb 13, 2006
I have 2 tables, lets say: Table1 and Table2.
Table1 has an ID field that is unique (PK).
Table2 has the same ID field and a date field which are both
unique (PK, FK)
I need to write a stored procedure that will query the ID
field from table1 like
Select distinct(id) from Table1
Would return:
ID
1
2
3
4
5
Now on the first of every month I want a job to run that
would create a new record for EACH ID from the above query. The new record would be created in Table2
with the ID and a date (that I will determine), resulting in:
ID DATE
1 01/01/06
2 01/01/06
3 01/01/06
4 01/01/06
5 01/01/06
The following month, after running it again, the table would
look like:
ID DATE
1 01/01/06
1 02/01/06
2 01/01/06
2 02/01/06
3 01/01/06
3 02/01/06
4 01/01/06
4 02/01/06
5 01/01/06
5 02/01/06
I have no idea how to “loop� through this record set for
each record in Table1 and in turn insert into Table2.
View 2 Replies
View Related
Mar 30, 2006
I have a current stored proc that creates records based on
certain criteria. One of the fields I
have is a SmallDateTime field. To
populate this from my stored proc, I have this code (for this one field).
SELECT @myLeaveDate = CAST(STR(MONTH(getdate()))+'/'+STR(01)+'/'+STR(YEAR(getdate())) AS DateTime)
This always creates a record for the 1st of the
current month. This works fine as is. After it runs I can look at the table and it
creates dates that look like the following: “2/1/2006� -Notice it doesn’t have
any minutes, seconds, etc.
Now what I need is to do something similar in another field
which is also SmallDateTime, BUT I want the date to be for the 10th day
of the following month.
I got this working using dateadd, but it also appends the minutes, seconds,
etc.
View 1 Replies
View Related
May 9, 2001
Can I call a sp from within a sp ?
Is this a fairly normal practice ?
Thanks,
Ivan
View 2 Replies
View Related
Sep 15, 1999
Can someone help us with this stored proc.
We need the maxccid -1 to be passed as a value.
Here is the proc.
CREATE PROCEDURE NewBillingInfo
@int_acct_id char (10)
@cc_nickname varchar (20),
@cc_zip varchar (20),
@cc_name varchar (100),
@cc_num varchar (20),
@cc_typ varchar (20),
@cc_month char (2),
@cc_year char (4)
as
set nocount off
declare @maxaddrid int
declare @maxccid smallint
/* BEGIN ENCRYPT DATA*/
exec encrypt @cc_zip output, @cc_zip
exec encrypt @cc_name OUTPUT, @cc_name
exec encrypt @cc_num OUTPUT , @cc_num
exec encrypt @cc_typ OUTPUT, @cc_type
exec encrypt @cc_month OUTPUT, @cc_month
exec encrypt @cc_year OUTPUT, @cc_year
BEGIN TRAN
/* get max credit card id for customer and add 1 */
SELECT @maxccid = Max(int_cc_id) from CusCredit where int_acct_id = @int_acct_id
if @maxcced is null
SELECT @maxccid = -1
SELECT @maxccid = @maxccid + 1
INSERT INTO CusCredit
(int_acct_id, int_cc_id, cc_name, cc_num,
cc_typ, cc_month, cc_year, cc_zip, cc_nickname)
VALUES
(@int_acct_id, @maxccid, @cc_name, @cc_num,
@cc_type, @cc_month, @cc_year, @cc_zip, @cc_nickname)
if @@ROWCOUNT < 1
BEGIN
ROLLBACK TRAN
RETURN 103
end
COMMIT TRAN
RETURN
GO
If someone could take a minute and look at this I would be so grateful.
Thanks Dianne Watson
View 1 Replies
View Related
Nov 29, 2000
I made a strored proc and I receive my like condition in parameter. The like condition must be in '' like (... like 'a%'). I'm sure that it's just a question of apostrophe.
for example:
declare @Command varchar(8000)
declare @Compagnie varchar(100)
select @Compagnie = 'Tonna%'
select @Command = 'SELECT distinct [Site Status].DISTRIBUTION, [Site Status].CC FROM [Site Status] WHERE [Site Status].CC like ' +@Compagnie
execute (@Command)
how can i write that @Compagnie is in apostrophe
thanks
View 1 Replies
View Related
