Whenever I run this DTS package that has a SQLTask, I get the following error message: "Maximum stored procedure nesting level exceeded(Limit 32)"
What does this mean? My query was working fine, but now I'm recieving this error message. I won't complet my required task. Is there any way to change the nesting level to be unlimited. I am totally confused. If you can please help. Thanks again.
Dre
I have the following stroed procedure and need someone to tell me what i am doing wrong. First off i am passing the value of sName from ASP to my sql stored procedure.
the following will work if i do (select distinct * )
Code:
SQL:
CREATE PROCEDURE Get_codes
@sName varchar(255)
AS
Select DISTINCT @sName
From CheckDetail
Where @sName is not Null and @sName <> ''
/*Order by @sName*/
GO
I am using a stored procedure to update data while in detailsview.I am having a rough time. Dont know why this wont workthanks a lotheres my codeALTER PROCEDURE UpdateCustomerInfo ( @CustomerID as INT, @LName as varchar(50), @FName as varchar(50), @Dept as varchar(50)=NULL, @PhoneType as varchar(50)=NULL, @OfficeType as varchar(50) = NULL, @Ext as Int=NULL, @BridgeExt as int=NULL, @Workstation as varchar(50)=NULL, @OldPrinters as varchar(50)=NULL, @NewPrinters as varchar(50)=NULL, @PhoneImg as varchar(50)=NULL, @OfficeImg as varchar(50)=NULL, @Complete as Bit=NULL, @FaxModel as varchar(50)=NULL, @FaxNumber as varchar(50)=NULL, @ConfPhone as varchar(50)=NULL, @ConfExt as varchar(50)=NULL, @ReutersDacsId as Varchar(50)=NULL, @Bloomberg as Varchar(50)=NULL, @NewFloor as Int=NULL, @OldFloor as Int=NULL )AS UPDATE CustomerInfo SET LName = @LName, FName = @FName, Dept = @Dept, PhoneType = @PhoneType, Ext = @Ext, BridgeExt = @BridgeExt, Workstation = @Workstation, OldPrinters = @OldPrinters, NewPrinters = @NewPrinters, OfficeImg = @OfficeImg, PhoneImg = @PhoneImg, Complete = @Complete Where CustomerId = @CustomerId UPDATE Extras SET CustomerID = @CustomerID, FaxModel=@FaxModel, FaxNumber=@FaxNumber, ConfPhone=@ConfPhone, ConfExt=@ConfExt, ReutersDacsId=@ReutersDacsId, Bloomberg=@Bloomberg where CustomerID = @CustomerID RETURN
View 2 Replies View RelatedI have a table that contains 5 columns (VarChar); where column(0) is a unique ID. Using the unique ID I would like to get the other 4 columns return to me via a stored procedure. Is it possible to have a sproc that has one input var and 4 output?
View 4 Replies View RelatedHi Sir,
I want to call one linked server stored procedure from another stored procedure.
--BATCH FOR LINKED SERVER SETUP
SET @IBatchNum = 2
EXEC PR_Linked_Server
@VServer = 'Linked_Amisys'
,@VSrvProduct = ''
,@VProvider = 'SQLOLEDB'
,@VDataSrc = 'DTCORPMXDV9'
,@VCatalog = 'pubs'
,@VCurrentUsr = 'CORPajohri'
,@VServerUsr = 'dba'
,@VServerPwd = 'dba'
END TRY
The linked server was not created When I executed the query. However, I was able to create the linked server when I executed this query(batch 2) alone.
Is there any limitation of SP which I am not aware of?
Hi People, i'm having some trouble with a stored proceddure used for an updat from a Formview.
Error message i'm getting is Must declare the scalar variable "@CategoryID".
I can't seem to work out why this is occuring and not allowing my proc to run properly. If anyone could help me that would be great :-)
Here is the whole store procedure.
ALTER PROCEDURE dbo.DeluxeGuideAdmin_Update
@ID int,@CategoryID varchar(10),
@RegionID int,@CompanyName nvarchar(25),
@Email nvarchar(25),@PDFFront nvarchar(50),
@PDFBack nvarchar(50),@ThumbFront nvarchar(50),
@ThumbBack nvarchar(50),@Notes nvarchar(max)
AS
DECLARE @SQL varchar(1000)
SET @SQL = 'UPDATE DeluxeGuide SET CategoryID = @CategoryID, RegionID = @RegionID, CompanyName = @CompanyName, Email = @Email, Notes = @Notes'IF (@PDFFront IS NOT NULL) OR (@PDFFront != '')
SET @SQL = @SQL + ', PDFFront = @PDFFront'IF (@PDFBack IS NOT NULL) OR (@PDFBack != '')
SET @SQL = @SQL + ', PDFBack = @PDFBack'IF (@ThumbFront IS NOT NULL) OR (@ThumbFront != '')
SET @SQL = @SQL + ', ThumbFront = @ThumbFront'IF (@ThumbBack IS NOT NULL) OR (@ThumbBack != '')
SET @SQL = @SQL + ', ThumbBack = @ThumbBack'
SET @SQL = @SQL + ' WHERE (ID = @ID)'
Print '@SQL = ' + @SQLEXEC(@SQL)
RETURN
I am using sql 2005 beta
View 23 Replies View RelatedI would like to create a script that lists out all of the SQL code for the procedures and triggers I have created in a database.
What I want to do is save the code for each procedure/trigger as a *.SQL file without having to open up each one in Enterprise Manager and save them individually.
Listing the names is easy by looking in sysobjects, but is the SQL code stored in a system table anywhere?
Does anybody have any alternative approach to this problem?
Thanks in advance,
Mark
Can i call tigger in store procdure and vice versa??
if yes how it ?????????
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies View RelatedCan I invoke stored procedure stored inside from a user defined table column?
View 5 Replies View RelatedSeems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedHello to all!
I have a table name stored in a scalar variable (input parameter of my stored procedure). I need to run SQL statement: SELECT COUNT (*) FROM MyTable and store the result of my query in a scalar variable:
For example:
declare @countRows int
set @countRows = (select count(*) from MyTable)
The problem is that the name of MyTable is stored in the input variable of my stored procedure and of corse this does not work:
declare @countRows int
set @countRows = (select count(*) from @myTableName)
I also tried this:
declare @sqlQuery varchar(100)
set @sqlQuery = 'select count(*) from ' + @myTableName
set @countRows = exec(@sqlQuery)
But it looks like function exec() does not return any value...
Any idea how to solve this problem?
Thanx,
Ziga
Greetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Thanks!
Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
Hello
I'm start to work with SSIS.
We have a lot (many hundreds) of old (SQL Server2000) procedures on SQL 2005.
Most of the Stored Procedures ends with the following commands:
SET @SQLSTRING = 'SELECT * INTO ' + @OutputTableName + ' FROM #RESULTTABLE'
EXEC @RETVAL = sp_executeSQL @SQLSTRING
How can I use SSIS to move the complete #RESULTTABLE to Excel or to a Flat File? (e.g. as a *.csv -File)
I found a way but I think i'ts only a workaround:
1. Write the #Resulttable to DB (changed Prozedure)
2. create data flow task (ole DB Source - Data Conversion - Excel Destination)
Does anyone know a better way to transfer the #RESULTTABLE to Excel or Flat file?
Thanks for an early Answer
Chaepp
Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
Hi Peeps
I have a SP that returns xml
I have writen another stored proc in which I want to do something like this:Select FieldOne, FieldTwo, ( exec sp_that_returns_xml ( @a, @b) ), FieldThree from TableName
But it seems that I cant call the proc from within a select.
I have also tried
declare @v xml
set @v = exec sp_that_returns_xml ( @a, @b)
But this again doesn't work
I have tried changing the statements syntax i.e. brackets and no brackets etc...,
The only way Ive got it to work is to create a temp table, insert the result from the xml proc into it and then set @v as a select from the temp table -
Which to be frank is god awful way to do it.
Any and all help appreciated.
Kal
Hi all,
What is the Difference between Stored Procedure and Inline Quries...... Is Stored Procedure is faster then Inline Query...
What is the professional Approch....
I m using Inline Quries in my Professional Project with Microsoft Application Block..... Someone Said me this is not a professional approch... use stored procedure instead of Inline Quries... i m so puzzled...
plz guide me..... :)
Thanx
Sajjad
Hi, How can I store a stored procedure's results(returning dataset) intoa table?Bob*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedSince RDMBS and its language SQL is set-based would it make more senseto call a given stored process "Stored Sets" instead of currenttheorically misleading Stored Procedure, as a measure to prodprogrammers to think along the line of sets instead of procedure?
View 4 Replies View RelatedHi all,I have a stored procedure that return a resultsete.g. stored proc: get_employee_detailsselect emp_id, emp_name, emp_salary, emp_positionfrom empoloyeeI would like to write another stored procedure that executes the abovestored procedure - returning the same number of records but it willonly show 2 columnse.g. new stored proc: get_employee_pay -- executesget_employee_detailsI only need to know emp_id, emp_salary.How can this be done in sql stored procedure?Thanks,June Moore.
View 2 Replies View RelatedI am writing a set of store procedures (around 30), most of them require the same basic logic to get an ID, I was thinking to add this logic into an stored procedure.
The question is: Would calling an stored procedure from within an stored procedure affect performance? I mean, would it need to create a separate db connection? am I better off copying and pasting the logic into all the store procedures (in terms of performance)?
Thanks in advance
John
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
When you create a Stored procedure, is it automatically stored under the default Filegoup?
How can I see under which Filegroup my Stored Procedures and Triggers are stored?
I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
FOXPRO employee.dbf InsertTrigger:
employee_insert_trigger(VAL(Employee.ep_pk),Employ ee.fname,Employee.lname,Employee.email,Employee.us er_login,Employee.phone)
FOXPRO corresponding Stored Procedure:
FUNCTION EMPLOYEE_INSERT_TRIGGER
PARAMETERS wepk,wefname,welname,weemail,WEUSERID,WEPHONE
nhandle=SQLCONNECT('SS_PDITHP3','userid','password ')
IF nhandle<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nhandle<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
RETURN
ENDIF
nquery="exec ewo_sp_insertNewEmployee @WEPK ="+STR(wepk)+",@WEFNAME ='"+wefname+"',@WELNAME ='"+welname+"',@WEEMAIL ='"+weemail+"',@WEUSERID ='"+weuserid+"',@WEPHONE='"+wephone+"',@RETCODE =0"
nsucc=SQLEXEC(nhandle,nquery)
SQLDISCONNECT(nhandle)
IF nSucc<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nSucc<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
ENDIF
RETURN
SQL SERVER Stored Procedure called from FOXPRO Stored Procedure
CREATE procedure ewo_sp_insertNewEmployee (
@WEPK int,
@WEFNAME char(20),
@WELNAME char(20),
@WEEMAIL char(50),
@WEUSERID char(15),
@WEPHONE char(25),
@RETCODE int OUTPUT
)
AS
insert into WO_EMP (
WE_PK,
WE_FNAME,
WE_LNAME,
WE_EMAIL,
WE_USERID,
WE_PHONE
)
VALUES (
@WEPK,
@WEFNAME,
@WELNAME,
@WEEMAIL,
@WEUSERID,
@WEPHONE
)
IF @@ERROR <> 0
BEGIN
SET @RETCODE=@@ERROR
END
ELSE
BEGIN
-- SUCCESS!!
SET @RETCODE=0
END
return @RETCODE
GO
i have created the folowing function but keep geting an error.
Only functions and extended stored procedures can be executed from within a function.
Why am i getting this error!
Create Function myDateAdd
(@buildd nvarchar(4), @avdate as nvarchar(25))
Returns nvarchar(25)
as
Begin
declare @ret nvarchar(25)
declare @sqlval as nvarchar(3000)
set @sqlval = 'select ''@ret'' = max(realday) from (
select top '+ @buildd +' realday from v_caltable where realday >= '''+ @avdate +''' and prod = 1 )a'
execute sp_executesql @sqlval
return @ret
end
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???