Please Help... Stored PRocedure Return Values
May 9, 2008
Hi,
I am trying to get the combination of results in my stored procedure, I am not getting what I need. Following are the things which I need to return from my stored proc.
1. I need to select distinct categories and their record count
2. I also need to select the records from the table.
3. Need to send both category, record counts and records.
First is it possible in stored procedure?
Following is helpful information.
Data in tables looks like this.
prod id, prod_name, prod_category
1, T shirts, Mens Apparel
2 , Shirts, Mens Apparel
3 , Pants , Mens Apparel
4, Tops , Women Wear
5, Bangles, Women Wear
And in User Interface I need to show like this.
Mens Apparel (3)
1 T Shirts
2 Shirts
3 Pants
Women Wear (2)
4 Tops
5 Bangles
Please help me if there is any way to return the complete data structure using stored procedure. If I do something in java code, I can get this, but I am trying to get directly from stored procedure only.
Thanks in advance...
Chandrasekhar
View 1 Replies
ADVERTISEMENT
Aug 19, 2015
I have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
View 17 Replies
View Related
Jun 4, 2004
Hello Group
I am new to stored procedure and I need some assistants. I am using the following stored procedure and I would like the return the fldPassword and fldFullName values. Both fields are in the same table. What I am trying to do is display the uses full name (i.e. Welcome <full Name>) and with the password I want to check that the password is not the default password if it is then do a redirect to the change password page.
Thank you
Michael
CREATE PROCEDURE stpMyAuthentication
(
@fldUsername varchar( 50 ),
@fldPassword Char( 25 ),
@fldFullName varchar( 75 ) OUTPUT
)
As
DECLARE @actualPassword Char( 25 )
SELECT
@actualPassword = fldPassword
FROM [tbUsers]
Where fldUsername = @fldUsername
IF @actualPassword IS NOT NULL
IF @fldPassword = @actualPassword
RETURN 1
ELSE
RETURN -2
ELSE
RETURN -1
GO
code
Sub Login_Click(ByVal s As Object, ByVal e As EventArgs)
If IsValid Then
If MyAuthentication(Trim(txtuserID.Text), Trim(txtpaswrd.Text)) > 0 Then
FormsAuthentication.RedirectFromLoginPage(Trim(txtuserID.Text), False)
End If
End If
End Sub
Function MyAuthentication(ByVal strUsername As String, ByVal strPassword As String) As Integer
Dim strFullName As String
' Variable Declaration
Dim myConn As SqlConnection
Dim myCmd As SqlCommand
Dim myReturn As SqlParameter
Dim intResult As Integer
Dim sqlConn As String
' Set conn equal to the conn. string we setup in the web.config
sqlConn = ConfigurationSettings.AppSettings("sqlDbConn")
myConn = New SqlConnection(sqlConn)
' We are going to use the stored procedure setup earlier
myCmd = New SqlCommand("stpMyAuthentication", myConn)
myCmd.CommandType = CommandType.StoredProcedure
' Set the default return parameter
myReturn = myCmd.Parameters.Add("RETURN_VALUE", SqlDbType.Int)
myReturn.Direction = ParameterDirection.ReturnValue
' Add SQL Parameters
myCmd.Parameters.Add("@fldUsername", strUsername)
myCmd.Parameters.Add("@fldPassword", strPassword)
myCmd.Parameters.Add("@fldFullName", strFullName)
' Open SQL and Execute the query
' Then set intResult equal to the default return parameter
' Close the SQL connection
myConn.Open()
myCmd.ExecuteNonQuery()
intResult = myCmd.Parameters("RETURN_VALUE").Value
Session("strFullName") = strFullName
myConn.Close()
Response.Write(strFullName)
' If..then..else to check the userid.
' If the intResult is less than 0 then there is an error
If intResult < 0 Then
If intResult = -1 Then
lblMessage.Text = "Username Not Registered!<br><br>"
Else
lblMessage.Text = "Invalid Password!<br><br>"
End If
End If
' Return the userid
Return intResult
End Function
View 1 Replies
View Related
Aug 13, 2007
Hi,
I have a requirement to get two count values from a stored procedure and use those values in other stored procedure.
How can I do that. I'm able to get only 1 value if i use the return key word.
Eg:
create proc test1 as
Begin
Declare scount int
Declare scount2 int
-- statements in stored procedure
return scount
return scount2
End
create proc test2
Declare variables...
Exec Test1
// here i want the values (scount and scount2 ), processed in stored procedure Test1 .
How can i get this.. please let me know..
Thanks,
srikanth
View 7 Replies
View Related
Jul 20, 2005
I came across an article in SQL Mag about Crosstab Queries. It worksgreat in Query Analyzer, but I'm stuck on how to use it in an AccessADP. I need to use it as a Recordsource in a form and report. Cansomeone tell me how to use it, and please try to be as descriptive aspossible. I'm new to Stored Procedures.Thanks*****************************************CREATE PROC sp_CrossTab@table AS sysname, -- Table to crosstab@onrows AS nvarchar(128), -- Grouping key values (on rows)@onrowsalias AS sysname = NULL, -- Alias for grouping column@oncols AS nvarchar(128), -- Destination columns (on columns)@sumcol AS sysname = NULL -- Data cellsASDECLARE@sql AS varchar(8000),@NEWLINE AS char(1)SET @NEWLINE = CHAR(10)-- step 1: beginning of SQL stringSET @sql ='SELECT' + @NEWLINE +' ' + @onrows +CASEWHEN @onrowsalias IS NOT NULL THEN ' AS ' + @onrowsaliasELSE ''ENDCREATE TABLE #keys(keyvalue nvarchar(100) NOT NULL PRIMARY KEY)DECLARE @keyssql AS varchar(1000)SET @keyssql ='INSERT INTO #keys ' +'SELECT DISTINCT CAST(' + @oncols + ' AS nvarchar(100)) ' +'FROM ' + @tableEXEC (@keyssql)DECLARE @key AS nvarchar(100)SELECT @key = MIN(keyvalue) FROM #keysWHILE @key IS NOT NULLBEGINSET @sql = @sql + ',' + @NEWLINE +' SUM(CASE CAST(' + @oncols +' AS nvarchar(100))' + @NEWLINE +' WHEN N''' + @key +''' THEN ' + CASEWHEN @sumcol IS NULL THEN '1'ELSE @sumcolEND + @NEWLINE +' ELSE 0' + @NEWLINE +' END) AS c' + @keySELECT @key = MIN(keyvalue) FROM #keysWHERE keyvalue > @keyENDSET @sql = @sql + @NEWLINE +'FROM ' + @table + @NEWLINE +'GROUP BY ' + @onrows + @NEWLINE +'ORDER BY ' + @onrows-- PRINT @sql + @NEWLINE -- For debugEXEC (@sql)GO
View 6 Replies
View Related
Sep 23, 2015
If I create a stored procedure and do not specify a return value or type, why does SSMS show that the stored procedure returns an int in the object explorer? Is that simply the success flag?
View 5 Replies
View Related
Sep 5, 2004
I need to check whether procedure found any matches or not. If not it has to return the column name where matching value was not found. For example, if there was no record found in the table "Addresses" column "customer" with the value @username, it should return "street". If id with value @prod_id was not found in the table "Products", the "productname" must be returned as well.
CREATE PROC sp_test
@id INT,
@username VARCHAR(50),
@prod_id INT
AS
SELECT name FROM Customers WHERE id=@id
SELECT street FROM Addresses WHERE customer=@username
SELECT productname FROM Products WHERE id=@prod_id
It is kind of check, which has to find out if users have inserted all the necessary values or not.
Thanks for any advice.
View 4 Replies
View Related
Jul 23, 2005
Using JDBC, is there a way to call a stored procedure with multiplereturn values? Thanks.
View 4 Replies
View Related
Feb 12, 2008
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
View 2 Replies
View Related
Nov 14, 2014
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
View 1 Replies
View Related
Apr 1, 2008
Hi All,
I have written a stored procedure that has a return value (OUTPUT Parameter) and was wondering if there is any way to retreive this value in SQL Server Reporting Services 2005? I get the result fine, but cannot figure out how to get the return parameter.
Thanks in advance.
Glenn
View 5 Replies
View Related
Nov 5, 2005
I have a quick question for you about SQL stored procedures. If I'min a stored procedure and want to call another stored procedure andreturn values from the second stored procedure what is the procedure?I know you do the following to run the second stored procedure and passin any parameters:EXEC GetAuthorBooks @AuthorIDSo if I wanted the GetAuthorBooks to return all the books for an authorand then populate a temp table in the original stored procedure, how doI return those records, and populate the temp table?What do I have to add to this line: EXEC GetAuthorBooks @AuthorID?
View 4 Replies
View Related
Aug 17, 2006
I need to somehow filter the results of my stored procedure to return the distinct "OrderNum" values. I'm using SQL database and I'm look for a way to alter the results from the stored procedure. My stored procedure rptOpenOrderLines currently returns all invoices (items under a OrderNum). I want to somehow filter those results to return one and only one of those "OrderNum" variables from the invoices. The tricky part is that I need to somehow find a way to do this without going into my database and directly altering the SQL stored procedure. I would be happy for any recommendations/ideas. Thanks!
View 3 Replies
View Related
Feb 1, 2007
I have a table that contains 5 columns (VarChar); where column(0) is a unique ID. Using the unique ID I would like to get the other 4 columns return to me via a stored procedure. Is it possible to have a sproc that has one input var and 4 output?
View 4 Replies
View Related
Jun 22, 2007
How to return multiple values from stored procedures to reports in sql server 2005
View 5 Replies
View Related
Sep 24, 2007
Can anyone let me know the prefered method for handling stored procedure errors. I usually trap the error in the stored proc and then return a value using an output parameter
e.g stored proc
if @@error <> 0 beginset @returnValue = -1returnend
c#com.Parameters.Add("@returnValue", SqlDbType.Int).Direction = ParameterDirection.Output;con.Open();com.ExecuteNonQuery();
int result = (int)com.Parameters[0].Value;
if (result == -1){//throw exception}else{//do whatever}
View 2 Replies
View Related
Jun 13, 2007
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies
View Related
Nov 20, 2007
Hi guys I know this is a really common question, and I have read loads of replies on it but everything I try does not work. I have written a small stored procedure in SQL server to upload images to a table and return the new ID using scope_identity. I have tested it and it works fine. here it is:******* @siteID numeric(18,0), @imgNum numeric(18,0), @title NVarchar(50), @MIMEtype nchar(10), @imageData varbinary(max)ASBEGINSET NOCOUNT ONdeclare @imageID intINSERT INTO [site_images] ([img_siteID], [img_num], [img_title], [img_MIME], [Img_Data]) VALUES (@siteID, @imgNum, @Title, @MIMEType, @ImageData) SET @imageID = SCOPE_IDENTITY()RETURN @imageIDSET NOCOUNT OFF************If I run this in management studio express it runs fine and returns the ID under 'return value'. The problem I have is trying to actually call that return value in VB. If I try using these lines:Dim returnParam As SqlParameterreturnParam = New SqlParameter("@imageID", SqlDbType.UniqueIdentifier)returnParam.Direction = ParameterDirection.OutputcmdTest.Parameters.Add(returnParam)withcnBKTest.Open()cmdTest.ExecuteNonQuery() imageIDparam = returnParam.value.toStringcnBKTest.Close() I get the error "procedure has too many arguments specified"And if I try to access the return value like this: imageIDparam = cmdTest.Parameters("@return_value").ValueI get the error "@return_value is not contained by this sqlparametercollection" What am I doing wrong? Any help would be greatly appreciated. Robsa
View 3 Replies
View Related
Nov 28, 2007
I have written this stored procedure but I get no return value (neither 0 nor 1). What I hope is when the transaction successful, return value 1. If fails, return value 0.1 set @TransactionOk = 0
2
3 BEGIN TRAN
4
5 UPDATE WhiteList_IMEI SET WhiteList_IMEI_Used = 1, Whitelist_IMEI_UsedDate = getdate()
6 WHERE WhiteList_IMEI_Code = @IMEICode_New
7
8 IF @@ERROR <> 0
9 BEGIN
10 ROLLBACK TRAN
11
12 PRINT ('Error. Contact Software Engineer.')
13 RETURN
14 END
15
16 COMMIT TRAN
17 set @TransactionOk = 1
View 6 Replies
View Related
May 16, 2008
Hi,
I have been trying to this this for quite a while with no joy can someone please tell me the error of my ways. I am trying to add a new record by stored procedure, this I can do, but my problem lies with the returnvalue part of the procedure. I cannot get it to work. When I debug it tells me that the "Specified cast is not valid" see C# code as i comment the line where it errors. I enclose a sample stored procedure and its c# code. Please can someone tell me where I am going wrong? as this is annoying me alot
SQL:create procedure SPUAddVehicleInsert
@VehicleDetailsRegistrationNumber varchar(50),
@VehicleDetailsMake varchar(50),
@VehicleDetailsModel varchar(50),
@NID bigint =null
as
insert into tblvehicledetails
(
VehicleDetailsRegistrationNumber,
VehicleDetailsMake,
VehicleDetailsModel,
)
values
(
@VehicleDetailsRegistrationNumber,
@VehicleDetailsMake,
@VehicleDetailsModel,
);
select @NID = scope_identity();c# code on sqldatasource: protected void dsAddVehicle_Inserted(object sender, SqlDataSourceStatusEventArgs e)
{
Int64 VID = (Int64)e.Command.Parameters["NID"].Value; //errors with specified cast is invalid
Response.Redirect("details.aspx?VID=" + VID.ToString());
}
protected void dsAddVehicle_Inserting(object sender, SqlDataSourceCommandEventArgs e)
{
SqlParameter p = new SqlParameter("NID", SqlDbType.BigInt);
p.Direction= ParameterDirection.ReturnValue;
e.Command.Parameters.Add(p);
}
sql datasource:<asp:SqlDataSource ID="dsAddVehicle" runat="server" ConnectionString="<%$ ConnectionStrings:National %>"
InsertCommand="SPUAddVehicleInsert" InsertCommandType="StoredProcedure" SelectCommand="SPUAddVehicleSelect"
SelectCommandType="StoredProcedure" OnInserted="dsAddVehicle_Inserted" OnInserting="dsAddVehicle_Inserting">
<InsertParameters>
<asp:Parameter Name="VehicleDetailsRegistrationNumber" Type="String" />
<asp:Parameter Name="VehicleDetailsMake" Type="String" />
<asp:Parameter Name="VehicleDetailsModel" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
View 4 Replies
View Related
Jun 20, 2005
I have a stored procedure that returns an integer value, declared as:Public Function MyProc(..) As Int32 . . Return <integer>End FunctionI return an integer value, and can do this and get the value returned from the method, as such:declare @rc intexec @rc = dbo.MyProc <params>select @rcThis returns the value; how do I return the value to code and get the value; I've been debugging and that is my problem, I can't get the value to return.Thanks a lot.
View 2 Replies
View Related
Nov 20, 2005
Hello all of members, I have written a Stored Procedure.that creates a new account and then returns a value witch displays a result to me.if result is 1 "Username already exists" or 2 "E-Mail already exists".I did it with "Return" instruction.But, I don't know how can I get the returned value in ASP.NET(VB.NET)? Please help me. Thanks in advance
View 3 Replies
View Related
Nov 25, 2005
Hi all,Is there anyway to get a returned value from a called Stored Procedure from within a piece of SQL? For example, I have the following code...DECLARE @testval AS INTSET @testval = EXEC u_checknew_dwi_limits '163'IF (@testval = 0)BEGIN PRINT '0 Returned'ENDELSEBEGIN PRINT '1 Returned'END...which
as you can see calls a SP called 'u_checknew_dwi_limits'. This SP
(u_checknew_dwi_limits) actually returns a value (1 or 0), so I want to
assign that value to the '@testval' variable (as you can see in my
code) - but Query Analyser is throwing an error at me. Is this the
correct way to do this?ThanksTryst
View 2 Replies
View Related
Apr 28, 2006
I have a Stored procedure (sql 2000), that inserts data into a table. Then, I add this, at the end: Return Scope_Identity()
I have the parameters for the sProc defined and added to the Command, but I'm having a really lousy time trying to figure out how to get the return value of the Stored PRocedure. BTW - I'm using OleDB instead of SQL due to using a UDL for the connection string.
I have intReturn defined as an integer
I've tried :Dim retValParam As OleDbParameter = cmd.Parameters.Add("@RETURN_VALUE", OleDbType.Integer)retValParam.Direction = ParameterDirection.ReturnValueintReturn=cmd.Parameters("@RETURN_VALUE").Value
whenever I add this section - I get an error that there are too many arguments for the sProc.
I've tried:intreturn=cmd.ExecuteNonquery - tried adding a DataReader - using ExecuteScalar - I've tried so many things and gotten so many errors - I've forgotten which formations go with which errors.
What is the best way to do this in the code part (VB.Net)?
Thanks ahead of time
View 2 Replies
View Related
May 16, 2006
I don't know whey this code does not return the values when I run it in sql server 2005 manager.set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[usp_usr_Add]
@FName nvarchar(30),
@LName nvarchar(30),
@UserName nvarchar(20),
@Password nvarchar(20),
@Email nvarchar(50),
@Country nvarchar(2),
@AIM nvarchar(10)
AS
SET NOCOUNT ON
BEGIN
DECLARE @usrID int
DECLARE @usrEmail int
SELECT @usrID = NULL
SELECT @usrEmail = NULL
SELECT @usrID = usrID FROM usr WHERE usrName = @UserName
IF (@usrID IS NOT NULL )
BEGIN
RETURN 1
END
SELECT @usrEmail = usrID FROM usr WHERE usrEmail = @Email
IF (@usrEmail IS NOT NULL)
BEGIN
RETURN 2
END
INSERT INTO usr (usrFName, usrLName, usrName, usrPassword, usrEmail, usrCountry, usrAIM, usrJoinDt)
VALUES (@FName, @LName, @UserName, @Password, @Email, @Country, @AIM, GetDate())
RETURN 0
END
When i run this code i executes fine except when the two conditions become true they do not return thier values, nor does it return 0 when it inserts a row.
View 5 Replies
View Related
Oct 17, 2000
Hi
I have the following stored procedure which when exectuted within the Query Analyzer adds a record and returns the @SeqRunNo value. However when I call
it in the from ado the record is added but the value is empty.
I enter the parameter as:
.Parameters.Append .CreateParameter("@SeqRunNo", adVarChar, adParamOutput, 4)
and try and access it as:
SeqRunNo = oCommand.Parameters("@SeqRunNo").Value
Any ideas?
Thanks.
john
CREATE PROCEDURE up_mix_Set_Seq_Run_No
@IID int,
@TrackingID int,
@ADP_Code varchar(6),
@ClientID varchar(20),
@SeqRunNo varchar(4) OUTPUT
AS
DECLARE @Max_Seq_No int,
@Seq_No varchar(4),
@LastUpdate datetime
SELECT @Seq_No = QTR_SEQ_RUN_NO FROM Transmission_Quarter
WHERE IID = @IID
AND Tracking_ID = @TrackingID
AND ADP_Code = @ADP_Code
IF ISNULL(@Seq_No,0) = 0
BEGIN
SET @LastUpdate = GETDATE()
SELECT @Max_Seq_No = CAST(MAX(QTR_SEQ_RUN_NO) AS int)
FROM Transmission_Quarter
WHERE IID = @IID
AND ADP_Code = @ADP_Code
IF ISNULL(@Max_Seq_No,0) = 0
BEGIN
SET @SeqRunNo = '0001'
END
ELSE
BEGIN
IF @Max_Seq_No = 9999
BEGIN
SELECT @SeqRunNo = '0001'
END
ELSE
BEGIN
SELECT @SeqRunNo = REPLICATE('0', 4 - DATALENGTH(CAST(@Max_Seq_No AS VARCHAR))) + CAST((@Max_Seq_No + 1) AS VARCHAR)
END
END
INSERT INTO Transmission_Quarter
(IID, Tracking_ID, QTR_SEQ_RUN_NO, ADP_Code, Last_Updated_By, Last_Updated_Date)
VALUES
(@IID, @TrackingID, @SeqRunNo, @ADP_Code, @ClientID, @LastUpdate)
END
ELSE
BEGIN
SELECT @SeqRunNo = @Seq_No
END
GO
View 2 Replies
View Related
Mar 27, 2002
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
View 1 Replies
View Related
Mar 27, 2002
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
View 2 Replies
View Related
Jul 20, 2005
Hello Newsgroup !My Tools are:Windows 2000, VBA(Access 2000) and MS SQL Server 7.0I wrote in an *.adp project (Access 2000) a Stored Procedure "xyz"with parameters a,bIn my VBA Code i wrote:Dim par As New ADODB.ParameterCmd.CommandType = adCmdStoredProcCmd.CommandText = "[prcSucheUNRWIAEStichtag]"Set par = Cmd.CreateParameter("@a", adInteger)Cmd.Parameters.Append parSet par = Cmd.CreateParameter("@b", adVarChar, adParamInput, 5)Cmd.Parameters.Append par........Cmd.Parameters(0) = aCmd.Parameters(1) = bSet rsTemp = Cmd.ExecuteNow my Problem is the following:there is an error in the stored procedure and i want to use something likethis:if @idontknow = '000000000'Beginreturn(1) -- Something <>0endHow can i use this return value in my VBA code ? Maybe i should ask thisquestion in an other Newsgroup. Pleaselet me know in which oneGreetingsFrank
View 2 Replies
View Related
Apr 22, 2008
In one of my SSIS jobs I have an 'Execute SQL Task' which is calling a stored procedure. This SP returns 0 or 1, if the SP returns 1 the package needs to stop executing. Is there a way to get the value that is returned from the SP and either continue or stop the job from continuing to run?
so if value is 0 it goes to the next step, if its 1 it stops running
View 8 Replies
View Related
Mar 14, 2007
Greetings All,
I am a newbie to SSIS and need some help. I need to get the return value from a stored procedure into a SSIS variable. I'm assuming I would use an OLE DB Command but I havn't a clue on how to capture the return value. Can someone get me started on how I can do this?
Note, the return value is actually an identity of the inserted value. I need this value in my data flow for further processing.
Thanks is advance!
View 6 Replies
View Related
Jul 10, 2006
I am have stored procedure that accepts one parameter and returns a single value
The sp works fine.
My question is how do I set the c# webpage to return the single value.
I need a specific example of how to code.
this is how the code should work.
A blank form is loaded, when the user clicks submit I need the code to pull the Login name from the text box and check to see if it exist. I have the sp working the way I need it to. But I can figure how to pull the single value into a variable in the code behind.
I am using dataset elsewhere on the site, so I created a ds the calls the sp. Can it work this way?
thanks,
View 3 Replies
View Related
Sep 6, 2006
Hi AllHere is my SPALTER PROCEDURE dbo.InsertPagerDays @ReportEndDate datetime, @PagerDays int,@UserID varchar(25)ASIF EXISTS(-- you cannot add a pager days more than once per report dateSELECT ReportEndDate, UserId from ReportPagerDays where ReportEndDate = @ReportEndDate and UserId = @UserID)Return 1 elseSET NOCOUNT OFF;INSERT INTO [ReportPagerDays] ([ReportEndDate], [PagerDays], [UserID]) VALUES (@ReportEndDate, @PagerDays, @UserID)RETURNMy Question is, this SP will not let you enter in a value more than once (which is what i want) but how do I write my code to inform the user? Here is my VB code becuase the SP does not error out (becuase it works it acts as if the record updates)How can I catch the Return 1'set parameters for SPDim cmdcommand = New SqlCommand("InsertPagerDays", conn)cmdcommand.commandtype = CommandType.StoredProcedurecmdcommand.parameters.add("@ReportEndDate", rpEndDate)cmdcommand.parameters.add("@PagerDays", PagerDays)cmdcommand.parameters.add("@UserId", strUserName)Try'open connection hereconn.Open()'Execute stored proccmdcommand.ExecuteNonQuery()Catch ex As Exceptionerrstr = ""'An exception occured during processing.'Print message to log file.errstr = "Exception: " & ex.Messagelblstatus.ForeColor = Drawing.Color.Redlblstatus.Text = "Exception: " & ex.Message'MsgBox(errstr, MsgBoxStyle.Information, "Set User Report Dates")FinallyIf errstr = "" Thenlblstatus.ForeColor = Drawing.Color.Whitelblstatus.Text = "Pager Days Successfully Added!"End If'close the connection immediatelyconn.Close()End Try
View 1 Replies
View Related
