Hi,
we had two tape drives for backup. Data is striping into the two tape drives.
Now i am restoring the database, so i kept database in single user mode, i restoring the data, after sometime tape is saying
restoring from one tapeset is over keep another tape into it.
But we have two tape drives, it is only pointing to one tape drive, it is not pointing to another tape drive. what i have to do.
Pls any one give me the details steps in this.
This is 65 server.
Pls this is very urgent.
I want to create a stored procedure to find if the index exists if noti have to create the index....i use following stored procedure....butdoes'nt seem to be working.......but when i hard code the query it doeswork... can u plz tell me were i am going wrongCREATE PROCEDURE [dbo].[sd_find_create_ind]@tblName varchar(255),@colName varchar(255),@indName varchar(255)ASdeclare @query varchar(1024)select @query = 'IF indexproperty(object_id('+@tblName+'),'+@indName+', ''IsClustered'') IS NULLCREATE INDEX '+@indName+' ON '+@tblName+'('+@colName+')'GOthanks a lot
Hi, I don't write in english well!! My pb is the appearance of error 1068 when i want startup the sqlserveragent service, and the error 1069 when i want startup the Msqlserver service. If you have a solution for my pb, respond me please... it's urgent thank you
I have no idea why sometimes a package just does not respond at all when you try to execute it? What happened is after I click on the debug button as usual to excute the package, it just hangs around there without any responding (while the whole package is in a debug mode after you click on the debug button)? It was fine sometimes, sometimes not.
I ever tried to restart the machine and it ran through once, but this time it did nto show the luck.
That's a very weird problem and I am looking forward to hearing from you for your advice and suggestions.
I've got a new machine at work here running Vista 64 bit....when I use SQL Management Studio to connect to a server it "Stops Responding" for a period of time and eventually comes back to life. When I check the server registration properties and click "Test Connection" it takes 13 seconds to succeed. Anyone else have this...it's God awful slow. Other devs on XP don't have this problem. What gives?
So I can't quite understand what's going on here... I've watched the video tutorial on ASP.NET about creating and securing my site using Membership (configuring roles and users), and I noticed that it creates a database in my App_Data folder (ASPNETDB, I think it's called). And I've got all that working on my local machine, but I'm confused as to how to move it to my server.My hosting provider is M6.net, and they've told me that if I want to upload a database to their server, I have to create it using my admin panel, then upload the file and they'll fill it in for me. My question is this: if I give them the database that's automatically created when I use login controls on my website LOCALLY, will that database still provide the correct membership functionality for my website when it's run from the web server? Such that I can give them (M6) the ASPNETDB (containing all the usernames/passwords/rules? I've already specified for my local site), have them populate the similarly titled database on the server, and have it still work with my pages?I'm also confused as to why that database doesn't have a connection string specified in the web.config file...can anyone shed some light on that?As I have no direct access to the database server on my hosting provider, I need to create the membership database with all the correct details prior to uploading it to my server - if simply using the locally generated copy won't work, what should I do?Lastly, the video tutorial says to go to the ASP.NET Configuration page to manage users, roles, security settings, etc., but I don't seem to have access to that through M6. Instead, I have access to a FrontPage configuration page that is strikingly similar in content to that ASP.NET Configuration page featured in the video, in that it also allows user and role management capability - is this the same thing under a different guise?
"Windows could not start the SQL Server (RETAIL) service on local computer."
"Error 1053: The service did not respond to the start or control request in a timely fashion."
I am trying to start my SQL Server service and I get the above error. I am using Windows 7 32 bit. SQL 2008 R2 32bit. SQL has ran successfully for 2 years on this machine until a power outage the other night. Now I have this happening on two computers.
I have read every event viewer message up and down and searched Google for hours trying to find a solution. I have done so many things from changing dll's to reinstalling sql 2008 to trying sql 2012.
I uninstalled SQL2008 and installed SQL2012 and it had the exact same error message. It wont start that one process. I have read this forum and I see many instances of this issue being reported but none of them have been recent. I attempted to do everything the previous posts said to try and nothing has worked. I have tried to roll back using windows restore point, I have tried to change the servicespipetimeline registry edit in the HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl. I have changed permissions.
I recently started working on SSIS packages and I have a package which will Validate a table records and prepare a txt file with all details and sends the email to approriate email ids. The problem i'm facing is I'm getting System.Net.Mail.SmtpException with inner exception as A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25. I'm using SMTPConnection and Windows Authentication as credentials.I also add the ISServerExec.exe to the firewall exclusion list still it throws the same error.
This morning I can not connect to our SQL Server 7.0 whatever from client or server. The error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++ A connection could not be estabished to server--Timeout expired Please verfy SQL Server is running and check your SQL Server registration properties and try again. ++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
We use windows NT authentication. We did not do any change on NT. The SQL Server daily schedule job usally stoped at 10:00AM, but today from the Window NT Task Manager, we can see that the SQL Server is still running untill now.
hi, I have settup up sql mail and did the following: 1. created an E-mail account and configured Out look by creating a pop3 mail profile. tested it by sending and receiving mail, that is ook 2. I Created one domain account for MSsqlserver and Sql Agent service. both services use same account and start automatically in the control panel-services 3. I used the profile that I created in outlook to test the sql mail but got an error: Error 22030 : A MAPI error ( error number:273) occurred: MapiLogon Ex Failed due to MAPI Error 273: MAPI Logon Failed
I really do not know what went wrong. I followed the steps from bol and still having a problem. Am I missing something.
I do have a valid email account I do have a valid domain account I tested outlook using the email account and it worked. so why sql server does not recognise MAPI.
My next question, How to configure MAPI in Sql server if what I did was wrong.
Hi, I have 2 windows 2000 server in cluster with sql server 2000 enterprise edition installed. I have activated the Server-Requested Encryption by using the sql server network utility (Force Protocol Encryption). After this, I have stoped sql server service. But I can't start it at this moment. The error is: 19015: The encrypton is required but no available certificat has been found.
Hello, I am facing a huge problem in my sql server database using access as a front end.The main problem is trying to execute queries "views" ,since they reside on sql server now,and using variables or parameters in reports and forms to filter on this query. Ex. how can the following be implemented using the same query but in sql server? Access ------ SELECT MAT_Charts.YYYYMM FROM MAT_Charts WHERE ((([Area_Code] & "-" & [GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key])) GROUP BY MAT_Charts.YYYYMM;
It is specifically this statement in which I am interested: [GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
I am getting error in sysindexes when i run dbcc checkdb on a production db. the error is Server: Msg 8928, Level 16, State 1, Line 1 please help me to remove this all the options of dbcc checkdb as well as table are not helping me
Hi Guys i write a thread before asking for help with reading an uploaded csv file, i have my code, it reads the csv file and currently displays it in a datagrid but what i actually want is to take the read information and import it into my sql express db. Heres the code<script runat="server"> Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) If (IsPostBack) Then Grid1.Visible = True Else Grid1.Visible = False End If End Sub Sub UploadButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) 'Save the uploaded file to an "Uploads" directory ' that already exists in the file system of the ' currently executing ASP.NET application. ' Creating an "Uploads" directory isolates uploaded ' files in a separate directory. This helps prevent ' users from overwriting existing application files by ' uploading files with names like "Web.config". Dim saveDir As String = "Data"
' Get the physical file system path for the currently ' executing application. Dim appPath As String = Request.PhysicalApplicationPath
' Before attempting to save the file, verify ' that the FileUpload control contains a file. If (FileUpload1.HasFile) Then Dim savePath As String = appPath + saveDir + FileUpload1.FileName
' Call the SaveAs method to save the ' uploaded file to the specified path. ' This example does not perform all ' the necessary error checking. ' If a file with the same name ' already exists in the specified path, ' the uploaded file overwrites it. FileUpload1.SaveAs(savePath)
' Notify the user that the file was uploaded successfully. UploadStatusLabel.Text = "Your file was uploaded successfully."
Else ' Notify the user that a file was not uploaded. UploadStatusLabel.Text = "You did not specify a file to upload." End If
End Sub
Sub DisplayButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim sConnectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0;" & "Data Source=C:inetpubwwwrootMerlinLocalPostOfficeAppData;Extended Properties=""text;HDR=NO;FMT=Delimited""" Dim objConn As New OleDbConnection(sConnectionString) objConn.Open() Dim objCmdSelect As New OleDbCommand("SELECT * FROM csv.txt", objConn) Dim objAdapter1 As New OleDbDataAdapter() objAdapter1.SelectCommand = objCmdSelect Dim objDataset1 As New DataSet() objAdapter1.Fill(objDataset1, "csv.txt") Grid1.DataSource = objDataset1.Tables(0).DefaultView Grid1.DataBind() objConn.Close() End Sub
</script> My csv file does not have headers so the default value is F1, F2, F3 F4, F5,F6, F7, my database has the following columns, ID,AddressLine1,AddressLine2,AddressLine3,AddressLine4,AddressLine5,AddressLine6,Postcode I need to know how to import the information direct into the db rather than displaying it on the page, ive tried but im really new to this and cant get it to work. I cant use DTS or bulk insert as the server this will go on doesnt have sql on it, the db is an MDF file so is transportable with the app. Thanks for your help
Hello I'm trying to execute the following INSERT INTO @dbName.dbo.AP_TransMain SELECT * FROM Inserted WHERE Pay_Id=Inserted.Pay_Id but its giving me an error becuase of @dbName which is a variable decleared as the followingDECLARE @dbName as varchar(100) the Database name is assigned to @dbName but i can't take the value of @dbName to combine it to the rest of the statment INSERT INTO @dbName.dbo.AP_TransMain SELECT * FROM Inserted WHERE Pay_Id=Inserted.Pay_Id
Hi, I am trying to make a backup of my database using Sql-DMO
When I do the backup on my server, my code runs fine. But when I backup from across the network from another computer, the database is saved on the server and not on the computer from where I am executing my application. How set SQLl-DMO to backup on the computer from where I am?
here is my code (found on the net)... Any suggestions greatly appreciated!
Cursor = Cursors.WaitCursor 'create an instance of a server class Dim my_srv As SQLDMO._SQLServer = New SQLDMO.SQLServerClass 'connect to the server my_srv.Connect("servername", "userid", "password")
'create a backup class instance Dim my_backup As SQLDMO.Backup = New SQLDMO.BackupClass 'set the backup device = files property my_backup.Devices = my_backup.Files 'set the files property to the File Name text box my_backup.Files = Me.txtFilePath.Text 'set the database to the chosen database my_backup.Database = "MYDB" 'perform the backup my_backup.SQLBackup(my_srv) MsgBox("Database successfully backed up.", MsgBoxStyle.Information) Cursor = Cursors.Default
I've a bactch file that is ran by the user and it looks for files and if it doesnot exist it waits for it and when it exsits, through isql it truncates the table and bcp in the file. In bcp files the loginname used in isql has dbo rights to truncate the table and the batch file also has password. The user who runs the script can also view the batch file and can know the password, Is there any way I could rewrite it so that the user cann't view the password or other way like SQL DMO or DTS package
Can any one tell me what is the database log size for a datafiles (tables and Indexes 500MB) On What basis database log size is estimated for the Database Creation of 500MB ? On What percentage will be the dump file size and log file size with respect to Database file size?? Can any body help!!!!!!!!!! Thanks in Advance
I've a table which has clustered index on one column and I tried to run begin transaction and then 2000 insert statements and then commit transaction, the transaction took 15 min and then it hung up the table, I could not access the table I had to stop the process, the only info I received was the table had 4517 locks, I've no clue how it got so many locks, there was db backup running as I had scheduled 15 min backup. could anyone help me that inside each open transaction how many insert statement is advisible and how many maximum locks does sql server works on a table and what could have gone wrong in my situation.
Hi, I am trying to do DTS for transfering data from one server to other server,both are on T1 link,after some time DTS failed by giving error message saying that " Error at destination for Row number 3357844,Errors encountered so far in this test:1,,,Invalid charector value for cast Specification " that table have 24 million rows..
How can i solve this problem,Please help me in this.this is urgent please
I have a field 'slnumber' defined as int.Values are like 70000,70001,70002 etc.I need to export this field using bcp to a text file and corresponding field in the text file should have 10 characters and should read like 0000070000,0000070001,0000070002 etc.How do we achieve this format? Any help is greatly appreciated. Thanks. Reddy.
I've made major changes to all the tbls in my db. I created new tables and rename the old ones as table1Old and in table1 I've added 2 columns. I want the data from table1Old to table1(my new modified table). Can anyone guide me how can I do this. insert into table1 select * from table1Old.
It gives me Insert error
Server: Msg 213, Level 16, State 4, Line 1 Insert Error: Column name or number of supplied values does not match table definition.
I tried to run a query on production server and it gave me this error.
Msg 10008, Level 9, State 10008 Possible network error: Bad token from SQL Server: Datastream processing out of sync. General network error. Check your documentation. Msg 10005, Level 1, State 10005 DBPROCESS is dead or not enabled. Msg 10018, Level 9, State 10018 Possible network error: Error in closing network connection. General network error. Check your documentation.
Please help. I am completely clueless about what to do and company DBA is out of city.
According to our stratergy we are taking trans log backup of every user database everuy two hours.things seem to work great and with success at the day time and at night once at 12.03 and 2.03 they fail and when i checked the error log i found that there is only one database for which its failing and it gives the following error.
Database ors: Transaction Log Backup... Destination: [D:BackupTranLogorsors_tlog_200108280203.TRN] [Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 4213: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot allow BACKUP LOG because file 'ors_Data' has been subjected to nonlogged updates and cannot be rolled forward. Perform a full database, or differential database, backup. [Microsoft][ODBC SQL Server Driver][SQL Server]Backup or restore operation terminating abnormally.
We had a option called select into/bulccopy set which i disabled once this failure has occured but still the problem persists....there are no other options set...i am out of resources i donno what to do..could you suggest me something and how to solve this problem its happening in prod.
As Said by someone i took a full backup...tooooo it does not solve the issue.
Need to write a storedprocedure to find the disk space of the server and disk space used on the server,there are devices created for the backup on these guide lines i need to check the is the disk space used is more than cetain % say 75% than find out which device occupies the maximum space out of all and reintialize it so as to free up the space.
We need to then schedule this every night so that it checks the space.
if (select REQUEST from TEAM3B_PULL_TOTAL_TST) != (select REQUEST from REQUEST_BUS_REQ_TST) begin Insert into REQUEST_BUS_REQ_TST (b.request,b.business_req_id,b.bus_test,b.test_cas e_id,b.test_case_source,b.test_case_descr) select a.request,a.business_req_id,a.bus_test,a.test_case _id,a.test_case_source,a.test_case as test_case_description from TEAM3B_PULL_TOTAL_TST as A JOIN REQUEST_BUS_REQ_TST AS B ON A.REQUEST = B.REQUEST Order by b.REQUEST,b.BUSINESS_REQ_ID,b.TEST_CASE_ID end
and I keep getting the error message of Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
I have tried using not in with this statement and it also gives me the same error. I need to say if request in table one does not equal request in table two then insert values into table one. Else insert the values into another table(table 3).
