I am new to SQL programming, i have only a fair knowledge on sql programmin.So, I apologies for any silly questions-
I have a Table1 which contains
C1-acountid
C2-date
C3-grossamount(postivie and negative decimal values)
C4-netamount
Table2
C1-groupid
C2-accountid
Table 3
C1-groupid
C2-groupname
I need to create a store procedure to retrieve the following on a single table
1. top 10 losers of the day i.e. 10 AccountIDs with the greatest negative Grossamount for the day
NOTE:These 10 AccountIDs may be sam or differing each day
2.sum of Netamount for each AccountIDs listed in STEP 1 since the beginning of the month.
NOTE:These 10 AccountIDs may be same or differing each day and each day sum of netamount should be from beginning of the month till current date.
3.Sum of Netamount for the last 5 days for each accountids in STEP1
The result set must contain the columns as below
C1-accountid
C2-date
C3-net loss for 10 losers on the current date since the beginning of the month
C4-Sum of Net for last 5 days
C5-groupname
Please help me.
Below is the script that i have written, without calculating the sum
(
select top 10 a.date, a.accountid, a.gross, a.net, c.groupname
from GBSys_Sum_EOD a
join server2.dbname.dbo.table2 b on a.accontid=b.accounit=id
join server2.dbname.dbo.Table3 c on b.groupid=c.groupid
where date> getdate()-1
and gross< (floor(-00.00)) order by gross
)
I am using Visual Studio 2005 (with the Windows Mobile extensions); SQL Compact. This is on a Vista machine. I am new to this environment.
-- I am struggling with the interface to SQL Compact from within VS 2005 (VB code). Specifically, if I try to run a "CREAT TABLE ...." command from code it appears to complete, but the table is not created.
I am using a sample create table SQL statement from a Microsoft web page:
Keep in mind this is my first compiled SQL program Stored Procedure(SP), copied from a book by Frasier Visual C++.NET in Visual Studio2005 (Chap12). So far, so theory, except for one bug (feature?)below. At some point I'm sure I'll be able to laugh about this, akinto forgeting a semi-colon in C/C++, but right now it's frustrating(time to sleep on it for a while).Problem--For some reason I get the error when trying to save files where twotables (called Author and Content), linked by a single key, form arelationship.By simple comparison of the source code in the textbook and my program(below) I found the difference: instead of, like in the textbook, theStored Procedure (SP) starting with "CREATE PROCEDURE", it*automatically* is (was somehow) given the name of 'ALTER PROCEDURE'and I cannot change this to "CREATE PROCEDURE" (you get an error in MSVisual Studio 2005 Pro edition of "There is already an object namedXXX in the database", see *|* below). No matter what I do, the SP isalways changed by Visual Studio 2005 to 'ALTER PROCEDURE'!!!(otherwise it simply will not save)Anybody else have this happen? (See below, others have had this happenover the years but it's not clear what the workaround is)Keep in mind this is my first attempt and I have ordered somespecialized books on SQL, but if this is a common problem (and Isuspect it's some sort of bug or quirk in VS2005), please let me know.Frankly I think SQL as done by VS2005 is messed up.Here are two Usenet threads on this problem:(1) http://tinyurl.com/2o956m or,http://groups.google.com/group/micr...1454182ae77d409(2) http://tinyurl.com/2ovybv or,http://groups.google.com/group/micr...9e5428bf0525889The second thread implies this is a bug--any fix?Also this bug might be relate to the fact I've switched (and notrebooted) from Administrator to PowerUser after successfully changingthe permissions in the SQL Server Management Studio Express (see thisthread: http://tinyurl.com/2o5yqa )Regarding this problem I might try again tommorrow to see if rebootinghelps.BTW, in the event I can't get this to work, what other SQL editor/compiler should I use besides MS Visual Studio 2005 for ADO.NET andSQL dB development?RL// source files// error message:'Authors' table saved successfully'Content' table- Unable to create relationship 'FK_Content_Authors'.The ALTER TABLE statement conflicted with the FOREIGN KEY constraint"FK_Content_Authors". The conflict occurred in database "DCV_DB",table "dbo.Authors", column 'AuthorID'.// due to the below no doubt!--CREATE PROCEDURE dbo.InsertAuthor /* THIS IS CORRECT (what I want)'CREATE PROCEDURE' not 'ALTER PROCEDURE'*/(@LastName NVARCHAR(32) = NULL,@FirstName NVARCHAR(32) = NULL)AS/* SET NOCOUNT ON */INSERT INTO Authors (LastName, FirstName)VALUES(@LastName, @FirstName)RETURN--ALTER PROCEDURE dbo.InsertAuthor /* WRONG! I want 'CREATE PROCEDURE'not 'ALTER PROCEDURE' but VS2005 won't save it as such!!!*/(@LastName NVARCHAR(32) = NULL,@FirstName NVARCHAR(32) = NULL)AS/* SET NOCOUNT ON */INSERT INTO Authors (LastName, FirstName)VALUES(@LastName, @FirstName)RETURN--*|* Error message given: when trying to save CREATE PROCEDURE StoredProcedure: "There is already an object named 'InsertAuthor' in the dB
Hi everybody, I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005 Stored procedure:
Alter PROCEDURE [dbo].[sp_GetIdeaByCategory] @CatId <span class="kwd">int</span> = 0 AS BEGIN SET NOCOUNT ON;
Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc End
Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to create proc usp_Proc1 @myTable myTable read only begin return 1 end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
I am building a stored procedure that changes based on the data that is available to the query. See below. The query fails on line 24, I have the line highlighted like this. Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
Has anyone encountered this before? Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied. It seems that my code is not passing the parameter to the stored procedure. When I click this hyperlink: <asp:HyperLink ID="HyperLink1" Runat="server" NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>' Text='<%# Eval("Name") %>' ToolTip='<%# Eval("Description") %>' CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'> </asp:HyperLink> it is suppose to get the country name and description, based on the country id. I am passing the country id like this. protected void Page_Load(object sender, EventArgs e) { PopulateControls(); } private void PopulateControls() { string countryId = Request.QueryString["CountryID"]; if (countryId != null) { CountryDetails cd = DivisionAccess.GetCountryDetails(countryId); divisionNameLabel.Text = cd.Name; divisionDescriptionLabel.Text = cd.Description; } } To my app code like this: public struct CountryDetails { public string Name; public string Description; } public static class DivisionAccess { static DivisionAccess() public static DataTable GetCountry() { DbCommand comm = GenericDataAccess.CreateCommand(); comm.CommandText = "GetCountry"; return GenericDataAccess.ExecuteSelectCommand(comm); } public static CountryDetails GetCountryDetails(string cId) { DbCommand comm = GenericDataAccess.CreateCommand(); comm.CommandText = "GetCountryDetails"; DbParameter param = comm.CreateParameter(); param.ParameterName = "@CountryID"; param.Value = 2; param.DbType = DbType.Int32; comm.Parameters.Add(param); DataTable table = GenericDataAccess.ExecuteSelectCommand(comm); CountryDetails details = new CountryDetails(); if (table.Rows.Count > 0) { details.Name = table.Rows[0]["Name"].ToString(); details.Description = table.Rows[0]["Description"].ToString(); } return details; }
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied Someone please help!
Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
For some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
Ok, so i have this program, and at the moment, it generates an sql statement based on an array of db fields, and an array of values...
my question is this, is there any way to create a stored procedure that has multiple dynamic colums, where the amount of colums could change based on how many are in the array, and therefore passed by parameters...
if this is possible, is it then better the pass both columns and values as parameters, (some have over 50 columns)...or just create a seperate stored procedure for each scenario?? i have no worked out how many this could be, but there is 6 different arrays of colums, 3 possible methods (update, insert and select), and 2 options for each of those 24...so possibly upto 48 stored procs...
this post has just realised how deep in im getting. i might just leave it as it is, and have it done in my application...
but my original question stands, is there any way to add a dynamic colums to a stored proc, but there could be a different number of colums to update or insert into, depending on an array??
What I am looking to do is use a complicated stored procedure to getdata for me while in another stored procedure.Its like a view, but a view you can't pass parameters to.In essence I would like a sproc that would be like thisCreate Procedure NewSprocASSelect * from MAIN_SPROC 'a','b',.....WHERE .........Or Delcare Table @TEMP@Temp = MAIN_SPROC 'a','b',.....Any ideas how I could return rows of data from a sproc into anothersproc and then run a WHERE clause on that data?ThanksChris Auer
Hello to all, I have a stored procedure. If i give this command exce ShortestPath 3418, '4125', 5 in a script and excute it. It takes more 30 seconds time to be excuted. but i excute it with the same parameters direct in Microsoft SQL Server Management Studio , It takes only under 1 second time I don't know why? Maybe can somebody help me? thanks in million best Regards Pinsha My Procedure Codes are here:set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO -- ============================================= -- Author: <Author,,Name> -- Create date: <Create Date,,> -- Description: <Description,,> -- ============================================= ALTER PROCEDURE [dbo].[ShortestPath] (@IDMember int, @IDOther varchar(1000),@Level int, @Path varchar(100) = null output ) AS BEGIN
if ( @Level = 1) begin select @Path = convert(varchar(100),IDMember) from wtcomValidRelationships where wtcomValidRelationships.[IDMember]= @IDMember and PATINDEX('%'+@IDOther+'%',(select RelationshipIDs from wtcomValidRelationships where IDMember = @IDMember) ) > 0 end if (@Level = 2) begin select top 1 @Path = convert(varchar(100),A.IDMember)+'-'+convert(varchar(100),B.IDMember) from wtcomValidRelationships as A, wtcomValidRelationships as B where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0 and PATINDEX('%'+@IDOther+'%',B.RelationshipIDs) > 0 end if (@Level = 3) begin select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember) from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0 and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',C.RelationshipIDs) > 0 end if ( @Level = 4) begin select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember) from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0 and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',D.RelationshipIDs) > 0 end if (@Level = 5) begin select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)+'-'+convert(varchar(100),E.IDMember) from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D, wtcomValidRelationships as E where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0 and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0 and charindex(convert(varchar(100),E.IDMember),D.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',E.RelationshipIDs) > 0 end if (@Level = 6) begin select top 1 @Path = '' from wtcomValidRelationships end END
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Hi, I have an integration solution that backs into two databases. Database A is custom and Database B is integrated from a COTS product. The manufacturer of B supplies a formal interface as stored procedures (and I intend to honor that contract by limiting my access to B through those stored procs). Now, I have a search that is going to involve a subselect in the form of the following pseudocode:
select a,b from dbA.user.TableX where exists (select a from dbB.user.TableY)
I am trying to avoid creating 2 temporary cursors in the integration application and doing things in-memory (b/c of performance concerns).
So, my q is: How can I make this happen within database A?
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I hvae a stored procedure that has this at the end of it: BEGIN EXEC @ActionID = ActionInsert '', @PackageID, @AnotherID, 0, '' END SET NOCOUNT OFF
SELECT Something FROM Something Joins….. Where Something = Something now, ActionInsert returns a Value, and has a SELECT @ActionID at the end of the stored procedure. What's happening, if that 2nd line that I pasted gets called, 2 result sets are being returned. How can I modify this SToredProcedure to stop returning the result set from ActionINsert?
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Hello,I created the "MyDb" database using Microsoft SQL 2005 Server Management Studio and I added the table "dbo.Surveys".Then I right clicked on Store Procedures and created a new procedure.When I close it I am asked to save it. I save it and gave the file a name.However my stored procedure doesn't show in the Stored Procedures list.I can only access it by loading the file (File > Open > File). Why?When I open the File the Connect Window shows again.I believe the procedure is created because I used CREATE.When I execute it twice I got the message that there is already another procedure with that name so I change CREATE to ALTER.Could you explain to me how to make my procedure visible in:Databases/MyDb/Programmability/StoredProcedores How to run it with dbo.Surveys table and see all the records that returns?Thank You,MiguelMy Stored Procedure code is:SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE dbo.Surveys_GetSurveyBySurveyName -- Procedure Parameters @SurveyName nvarcharASBEGIN -- Prevent extra result sets from interfering with SELECT statements SET NOCOUNT ON; -- Procedure statements SELECT m.SurveyName FROM dbo.application_Surveys WHERE @SurveyName = u.SurveyName IF ( @@ROWCOUNT = 0 ) -- Survey Name not found RETURN -1 RETURN 0ENDGO
Hi all,Question from a guy who knows PL/SQL, but is starting withTransac-SQL on SQL Server....Is it possible to have a sub procedure in a Stored Procedure, likewe do in a PL/sql package ? Or better yet, have a kind of generalStored Procedure that would contain procedures called by more than oneStored Proc??I can't find anything like this in the online books....Thanks for your inputs....Philip
