i have a table that populates the data every second.
ex.
10:40:10
10:40:09
10:40:08
10:40:07
... so on
the problem is i want to gather the data like
Every Hour
10:00:00
09:00:00
08:00:00
07:00:00
..and so on
and Every Minutes like (1 Min, 5 mins, or 10 Mins, 30 Mins)
10:40:00
10:30:00
10:20:00
10:10:00
.. so on
by this, it will make my reporting not over populated.
Im using SQL server 2008 R2
Time Interval for hour and 30 minutes
--------------------------------------------------------------------------------
Hi Everyone
I Have column in sql server databas as "HHMMSS" and data as and i am doing a substring to get values for hours and minutes. since my calculations based on hour interval and 30 minutes interval
for ex: Now i want to show all the transaction done b/w 6 to 7 am or pn.
and for 30 minutes interval i have get the calculation as transactions done b/w 6:00 to 6:30 and 6:30 to 7:00 either it's am or pm. now how i can write my sql statements that calculates hour and 30 minutes intervals
HHMM
-------------
06:43
09:26
09:26
11:58
12:25
18:17
20:45
00:43
00:53
16:47
Thanks
Phani
I have a column of data that is the number of seconds. I need to format this column into the HH:MMS format. If there are 130 seconds the second column should read 00:02:10. How can I accomplish this in report builder or is it even possible in Report builder? I can use the following formula in SQL but is there a way to do it in Report Builder?
CONVERT(varchar(6), talktime / 3600) + ':' + RIGHT('0' + CONVERT(varchar(2),
talktime % 3600 / 60), 2) + ':' + RIGHT('0' + CONVERT(varchar(2), talktime % 60), 2)
Thanks
My table as data as follow,
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
DROP TABLE [dbo].[table_Data]
GO
/****** Object: Table [dbo].[table_Data] Script Date: 04/21/2015 22:07:49 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
[code].....
I have a table that is recording hits to a website. Everytime someone views a page, the datetime of the hit is recorded in a field called hit_date_time. I would like to be able to come up with a query that will show how many hits occured on a given day or given days, broken down by hour.
The resulting table for two days would look something like:
Time Hits
1/1/01 12:00 1
1/1/01 1:00 23
1/1/01 2:00 54
1/2/01 1:00 15
1/2/01 2:00 14
I can't seem to figure out how to write the query so that I can take into consideration the date and hour of the event so that I can count it.
Thanks,
Eron
Hi,I want to get the count of rows per each 20 minutes, is that possible?Is there a date function or any other function that I can use in Groupby clause, which will group the data of every 20 minutes and give methe count?Thank you.Vidya
View 3 Replies View RelatedI have an Excel database file that contains the total passenger passes from a specific location. The total number of passenger passes is counted in a period of 2 minutes(e.g. 14:45:00 to 14:46:59). I have imported my database into PowerPivot and have also created relevant PivotTables and PivotCharts with some slicers to analyze them. How can I create a slicer which filters data in greater periods of time like hour, day or month?
View 4 Replies View RelatedHello friends
what is the right datatype to store the hours and minutes part in the database?
i found some info which says we have to convert the duration(hrs and min) into minutes and then store
is it the right approach?
Regards
Sara
Here is what I have and (somewhat understand). I’m using Visual Web
Developer 2005 Express Edition and have setup my application to use form authentication
(which automatically creates the ASPNETDB.MDF file with several default tables
and views). I’m using the CreateUserWizard
which is fine…but I need to collect additional information like (firstname,
lastname, address…and on..). What I’ve
done. I’ve created a tabled named
UserProfile and set UserId as the primary key (uniqueidentifier).
I then setup a 1-to-1 relationship
between aspnet_Users and UserProfile (which I think is correct). On my UpdateContactInfo.aspx page (where
users go to update their personal information) I use a hidden label control
(UserValue) to receive the UserId during the page_load event as below:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load UserValue.Text = Membership.GetUser().ProviderUserKey().ToString() End Sub Now with the UserID available I need to populate the
UserProfile table with the UserId, firstname, lastname, address of the
currently logged in user. How can I do this and am I on the
right track..?
We have stored large text data in "Image" data type in SQL Server. Can someone tell me how to get that vlaue from image datafield. Thanks
View 3 Replies View RelatedPlease find below my query and result , how to display [Total Service Time ] in HH:Min format (Currently values in minutes)
Query:Â
SELECT Â DISTINCT Â dbo.sectn_dept.sectn_sc AS Customer,
MONTH(dbo.incident.date_logged) AS Month_Number, DATENAME(month,
dbo.incident.date_logged) AS Month, YEAR(dbo.incident.date_logged) AS Year,Â
dbo.incident.incident_ref PM_ref,
dbo.product.product_n "Product",
[Code] ....
 Â
Result:
Need to Display [Total Service Time] in below Format:
But Some values are repeating ....
I have a page that has about 8 dropdown boxes that need to be populated from sql tables. What is the best way to populate these boxes. Here is how I have it nowconn = New SqlConnection(ConfigurationManager.AppSettings("SQLString")) ''''''''''''' Fill in DropDownList Status '''''''''''''''''''strSelect = "SELECT * FROM Requests_Status"cmdSelect = New SqlCommand(strSelect, conn) conn.Open()dtrSearch = cmdSelect.ExecuteReader()ddlRequestStatus.DataSource = dtrSearchddlRequestStatus.DataTextField = "RequestStatusName"ddlRequestStatus.DataValueField = "RequestStatus"ddlRequestStatus.DataBind()ddlRequestStatus.Items.Insert(0, New ListItem("-- Select Below --", -1)) cmdSelect.Cancel()dtrSearch.Close()conn.Close()''''''''''''' Fill in DropDownList Container '''''''''''''''''''strSelect = "SELECT * FROM Containers"cmdSelect = New SqlCommand(strSelect, conn) conn.Open()dtrSearch = cmdSelect.ExecuteReader()ddlContainer.DataSource = dtrSearchddlContainer.DataTextField = "ContainerName"ddlContainer.DataValueField = "ContainerID"ddlContainer.DataBind()ddlContainer.Items.Insert(0, New ListItem("-- Select Below --", -1)) cmdSelect.Cancel()dtrSearch.Close()conn.Close()'''''''''''''''''''''''''''''I then repeat the same commands as above for the other 6 dropdowns. This seems like a bad way to have to do all this.ThanksCraig
View 3 Replies View RelatedHow can I populate options in a dropdown (combo?) box based on data pulled from a SQL database compared against certain paramaters (if it is not equal to x, equal to y, etc)?
Thanks.
I apologize about the newbie-ness of these questions, but I am a total newbie (I have used VB for a while but this is my first 5 hours with ASP ever).
I just asked how to populate dropdowns, which I have found out how to do, but this question is quite a bit more difficult for me.
I have a SQL database, and in that database is a table, with a few columns. The first columnis a list of user id's, and the second is list of "options".
I want to make it on my webpage so that if the userid matches the column1 data, then it will display a checkbox for the column 2 option. Ie, if its "USERID1,OPTION1" in the SQL table, then if userID = "USERID1" then it will make an checkbox with caption/name "OPTION1". It has to loop through all the rows in the SQL table and make all the checkboxes for these options that match.
I have no idea how to do this, any help would be great.
Hi Guys,
My ASP.Net app is multilingual and all my translations are stored in seperate MSDE tables, for example, tblEN for English, tblES for Spanish and tblTH for Thai.
When I send the installation files to my clients, I get them to double click on 4 MS DOS batch files that use OSQL to run 4 scripts.....
1. DataBase&Tables.sql - creates the database and tables
2. Logins&Users.sql
3. StoredProcedures.sql
4. Permissions.sql
This worked great before my language table came along to spoil the party and I now need some way of getting the data stored in the language on my server into the table on the client.
If I export the data to a text file and then send it out with the rest of the installation files - what are my options for transferring the data into the table ?
Any suggestions appreciated.
Steve.
I have the data as below,in which owner is assigning some task to another user.
INPUT
#########
OWNER ID TASK_ID TASK_ASSIGNEE
user1 11user2
user112user3
user1 13user4
PRIVILEGE table
#########
USER_DETAIL PRIVILEGE_ID
user110
user111
user112
user28
user35
user46
OWNER has one set of privilege details in privilege table. I need to check privilege for user2,user3 and user4 in privilege table, if privilege not matches with the user1 then i want to populate the data output as below
NEEDED OUTPUT
###########
OWNER ID TASK_ID TASK_ASSIGNEE
user1 11user2
user112user3
user1 13user4
user211user2
user312user3
user413user4
I am populating this data in the view.
I am trying to populate a dropdownlist from a sql data source in my codebehind using c#. I thought I had the code correct but I keep getting the following error and I am stuck: "Only assignment, call, increment, decrement, and new object expressions can be used as a statement"
Here is the code:protected void populateOppNameList(){
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString);SqlCommand cmd = new SqlCommand("SELECT empname FROM opportunity WHERE (username = " + userName + ")", conn);
SqlDataAdapter adapter = new SqlDataAdapter(cmd);
try
{
conn.Open();DataSet ds = new DataSet();DropDownList ddl_OppNames = (DropDownList)FormView1.FindControl("dropdownlist1");
ddl_OppNames.DataSource = ds;
ddl_OppNames.DataBind;}catch (Exception e)
{
}
finally
{if (conn != null) { conn.Close(); }
}
}
The only way the job success is if I select the option add rows wich is copying all rows even the ones that are already there, I tried to drop amd recreate the table option but i just dosn't run that way, help please..
View 1 Replies View RelatedHi!
I am creating a scheduling web application. I have managed to insert data into the database. The code is as follow:
Dim insertSQLDatasource As New SqlDataSource()
insertSQLDatasource.ConnectionString = ConfigurationManager.ConnectionStrings("ScheduleConnectionString").ToString
insertSQLDatasource.InsertCommandType = SqlDataSourceCommandType.Text
insertSQLDatasource.InsertCommand = "INSERT INTO Demo_Theatre_DB (StartTime, EndTime, CompanyName, Purpose, AccountManager, Presenter, ColorCode, Status, Comments) VALUES (@StartTime, @EndTime, @CompanyName, @Purpose, @AccountManager, @Presenter, @ColorCode, @Status, @Comments)"
insertSQLDatasource.InsertParameters.Add("StartTime", StartTimeTextBox.Text)
insertSQLDatasource.InsertParameters.Add("EndTime", EndTimeTextBox.Text)
insertSQLDatasource.InsertParameters.Add("CompanyName", CompanyNameTextBox.Text)
insertSQLDatasource.InsertParameters.Add("Purpose", PurposeTextBox.Text)
insertSQLDatasource.InsertParameters.Add("AccountManager", AccountManagerTextBox.Text)
insertSQLDatasource.InsertParameters.Add("Presenter", PresenterTextBox.Text)
insertSQLDatasource.InsertParameters.Add("ColorCode", ColorDDL.SelectedValue.ToString)
insertSQLDatasource.InsertParameters.Add("Status", StatusRadioButtonList.SelectedValue)
insertSQLDatasource.InsertParameters.Add("Comments", CommentTextBox.Text)
Try
insertSQLDatasource.Insert()
Catch ex As Exception
Panel1.Visible = True
InsertMsgLabel.Text = ex.Message.ToString
Finally
insertSQLDatasource = Nothing
End Try
Now I am trying to select the values for a particular event. For example, if the user selects an event with id 40, the values that corresponds to that row will be read and filled into the respective controls. I tried the following code, but doesn't work.
Dim sqlConn As SqlConnection = New SqlConnection("ScheduleConnectionString")
Dim com As SqlCommand = New SqlCommand("SELECT * FROM Demo_Theatre_DB WHERE ID=@ID", sqlConn)
sqlConn.Open()
Dim r As SqlDataReader = com.ExecuteReader()
While r.Read()
StartTimeTextBox.Text = r("StartTime")
EndTimeTextBox.Text = r("EndTime")
CompanyNameTextBox.Text = r("CompanyName")
PurposeTextBox.Text = r("Purpose")
AccountManagerTextBox.Text = r("AccountManager")
PresenterTextBox.Text = r("Presenter")
ColorDDL.SelectedValue = r("ColorCode")
StatusRadioButtonList.SelectedValue = r("Status")
CommentTextBox.Text = r("Comments")
End While
I hope someone can help me with this.
Your help will be appreciated.
Thanks!
I'm trying to write a stored procedure that will parse XML attributes and populate columns within a DB with the stripped data. I'm a complete novice who prior to this week knew nothing about SQL commands, My understanding at least is that I need to perform a bulk insert.
Example XML file:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Asset_Collection SYSTEM "Asset_Collection.dtd">
<Asset_Collection>
<Collection_Metadata
Name="Asset Collection"
Description="Random XML Feed Test"
[Code] ....
Table/Columns which need to be inserting into:
Table:
TABLE_A
Columns:
ProdID
CustomerID
AreaCode
I have a table which is already populated with data (Microsoft SQL 2008). I have now created a new column (int) which i want to populate with sequential numbers so that the new column created will serve let me know how many records exist in the table at a glance.
what SQL statement I need to write that will automatically polulate the newly created column with 1,2,,3,4,5 etc so that I can sort of number the records within the table.
I have 50000 records which I need to number and I really dont want to number the column manually via hand editing.
I have 5 or more tables to join to get a particular output which has to be sent to a destination table. In the 5 tables some are inner joins and some are left outer join. I am opting for stored procedure at this point. But I would like to know how can this be done in data flow transformations having multiple souce and merge joins or any other alternates. I tried using merge join, but this does not accept more than two tables.
I saw this simple post which kick started me to use ssis transformations to stored procedures. But I encounter issue.
http://www.mssqltips.com/tip.asp?tip=1322
error
"The destination component does not have any available inputs for use in creating a path".
Please advice alternates
I use a ole db to get data from database as source data, and use ole db destination to put data into excel, destination component connect to an excel file . and got below warning:
Warning 10 Validation warning. {9FA859ED-E4C7-4EA1-AE32-11F21CFDC23D} OLE DB Destination [136]: Truncation may occur due to inserting data from data flow column "sMessage" with a length of 2000 to database column "sMessage" with a length of 255. how to populate data length >255 to excel
I have a table with following data
(Id, date ,time)
11 2015/8/1
12:20:00
11
2015/8/1 12:21:00
11 2015/8/1
18:05:20
12 2015/8/1
11:20:00
12 2015/8/1
11:21:00
12 2015/8/1
18:10:20
I need the table with following record only
(Id, date ,time)
11 2015/8/1
12:20:00
11 2015/8/1
18:05:20
12 2015/8/1
11:20:00
12 2015/8/1
18:10:20
The problem is that I have (for example) following data
AA AA LH
BB BB ML
CC CC QA
DD DD PS
in space delimited file and i want to populate a database using SSIS and it is not working. Any suggestions will be appreciated.
Hello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated.
I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View Related
I have two Databases with the same name that reside in different servers. The two servers are linked servers. Each database consists of 5 Tables. The tables have identical names in each database.
The database in ServerA has 5 tables with data, the database in ServerB also has 5 tables with the same schema as ServerA, however the 5 identical tables in ServerB contain no data.
I need to populate the 5 tables in ServerB with the Data from the 5 tables in ServerA.
What SQL code or script can i use to populate the 5 tables in ServerB
Below are the names of the 5 tables:
TABLE1: [ServerB].[ProdDB].dbo.[Orders]
TABLE2: [ServerB].[ProdDB].dbo.[Sales]
TABLE3: [ServerB].[ProdDB].dbo.[Employee]
TABLE4: [ServerB].[ProdDB].dbo.[Customer]
TABLE5: [ServerB].[ProdDB].dbo.[Region]
Does any one have a script that could help me with this task. Thanks
I am using SQL Server 2005
Hello people,
I'm migrating an application from asp to asp.net and access to ms sql 2005. On the old db, there's a table with a column to store date and a column to store time. Ms sql only works with date and time together, right? I created a query to get the time from time column and update the date column inserting the time. I did something like this:
UPDATE S_ACC_MONEYSET Date_Oper = CONVERT(varchar, Date_Oper, 101) + ' ' + CONVERT(varchar, Time_Oper, 108)
Does anyone knows a better way to do that? Any other comments?
Thanks!
I have about 23 SQL servers running 6.5 SP3 or SP5a in a 24 hour environment. Most of the activity takes place between 6am and 11pm, with few transaction after 11pm. What is best to do with the main DB's transaction log, have the truncate at checkpoint option checked OR back up the transaction log a couple times a week? The Database is backed up every 6-8 hours.
Thanks in advance for your opinions/help.
LN
Hi all,
We have many messages in SQL server logs that say 'Log backed up:Database:COM,creation date(time):2003/03/26(19:41:58),first'
why is this message appeared every one hour?
How to get hour from a date
Msg_Time = 10/28/2006 12:20:00 AM
here how to get hour, minuts
see for month we are using month(Msg_Time),
for year we are using year(Msg_Time) same way how to fetch the hour and minutes
all are appreciate
Hi All,
I have several servers each with an instance of SQL Server with a number of databases in each instance. We are a law firm dealing mostly with documents (Modifying and creating new). Is there an easy way to determin how many transactions the transaction log handles per hour? Not all tables have a create date or modify date. Is there some way to monitor the transaction logs them selves?
Thanks,
Roy