I have to pick up a row from Customers and transfer it to CustomerMaster and CustomerDetails. CustomerId of CustomerMaster will be the CustomerId of CustomerDetails while transfer. Similarly for all other rows in Customers.
I am new to SQL Server7. I need to populate some tables from an SQL Server7 database at the end of the day. How can I automate this process? I also need to export these populated tables to a text file on daily basis. I know I can use "DTS" to do this. But is there any way to make these automated also? Or is there any third party tool to do all these?
Following is an example of a query which I use in a SP. <BR><BR> What I would really like to do is set both variables with one query. Can I get both data elements with one query, or do I have to run 2 queries to set 2 variables? This query is going to run over 2 servers and would like to save the extra trip. <BR><BR> set @int_MCID = (select top 1 iPID from customers inner join tblPersonnel on MtgConsultant = iPid where phone1 = @str_Phone and Position = 'Consultant') <BR><BR> set @int_LocID = (select top 1 iLocID from customers inner join tblPersonnel on MtgConsultant = iPid where phone1 = @str_Phone and Position = 'Consultant') <BR><BR> Select @int_LocID, @int_MCID <BR><BR>
Is it possible in SSIS to populate the package level variables at run time..meaning lets say I have a 4 variables defined with some default values..if I use a for loop iterator to read all the config files in a directory and want to read the data from each of those config files (config file has 4 rows of data corresponding to the 4 variables) into the variables.
I am trying to pull the records which are being affected i.e, comparing the values and if not same then populating the record.
I am using the below condition in where clause however i am getting runt time error as "Conversion failure when converting date and/or time from character string"
Condition in Where clause:
cast(isNull(tab1.Col1,'') as datetime) <> cast(isNull(tab2.col1,'') as datetime)
I am quite new to the complexities of MS SQL and have a problem, I would like to resolve. I have 2 tables with a unique identifier in both and want to populate a new table with information from both, but the second table I would like to populate just some fields that have a DOB eg
Table 1: uniqueId Name Address
Table2: uniqueId Type Setting
example of content for Table 2: uniqueId Type Setting 123 DOB 03/04/74 234 TFN 12345678 567 POA Mr Smith
So the new table needs to be populated with a ll of info in table 1 and has a new field called DOB so only the clients with a DOB should populate this field, if the client in Table 1 has a TFN reference, this record should be added to the new table but no value needs to be entered eg
123 Chris Smith 1 high street 03/04/74 234 Jon brown 2 high terrace <Null>
Hi. I have a report which has several datasources which require a table to be populated before they read from it. i.e. The first thing that needs to happen whenever the report is run, is a call to a stored procedure which populates the table the report datasources are based off of. The SP takes several minutes to complete and MUST complete before any of the datasources fetch their data.
How can this be achieved?
I can not find anything in the Visual Studio Report Designer which allows to me to instruct Datasource B to not execute before Datasource A has completed (or any other way to call a data population SP, before the data reader SP's execute).
I'm trying to setup a DTS that reads a flat file uses a Data Driven Query task and then selects ONLY records that does not exist in the database and then INSERT them to DB1.
This works fine but I need to add another functionality.
I need to create a record on another table(DB2) based on the freshly inserted records in DB1 using only some of the fields. How do I do it?
Is setting up a trigger possible so that everytime a record is inerted in DB1 it will automatically a populate DB2?
Flat file: ID Name Phone
DB1 ID Name Phone
DB2 ID PHone Event (from 00 to 10) NumActions (initialized to 0)
I am sorry for asking such a broad question, but I have been working on this and from what I can gather it can be done. My problem is that much of it has gone right over my head and I am getting more confused the more I read... I'm really, really confused...
Basically, I have a dataGridView that is populated with a number of fields from Table1 (ID, NameID, Status, Phone, Notes). This works fine, BUT I would like to access Table2 and have, where ID in Table2 = NameID in Table1, it load the First Name & Last Name into the dataGridView. I am able to load the information from Table 2 like so: SELECT NameFirst + ' ' + NameLast from Table2", but I can't get both Tables to work correctly.
I would like the dataGridView to be layed out like this:
ID NameID Name (NameFirst + NameLast) Status Phone Notes
I can't for the life of me understand or get this to work (Or for that matter even understand what I am trying to do...
Also, I am using Access 2007.
I would greatly appreciate some help, and possibly some explanation in laymans terms so that I might be able to understand this. I have read a lot about this, but for whatever reason it is just soooooo over my head that I can't follow it whatsoever.
// create and open the connection OleDbConnection conn = new OleDbConnection(conString); OleDbCommand command = new OleDbCommand(); command = conn.CreateCommand();
// create the DataSet DataSet ds = new DataSet();
// run the query command.CommandText = "SELECT ID AS [#], NameID AS [Name], Status AS [Status], Phone AS [Phone], Notes AS [Notes] FROM Table1 WHERE ID = " + textBox13.Text + ";"; OleDbDataAdapter adapter = new OleDbDataAdapter(); adapter = new OleDbDataAdapter(command); adapter.Fill(ds);
// close the connection conn.Close();
bindingSource1.DataSource = ds.Tables[0];
dataGridView1.DataSource = bindingSource1;
// set the size of the dataGridView Columns this.dataGridView1.Columns[0].Width = 10; this.dataGridView1.Columns[1].Width = 100; this.dataGridView1.Columns[2].Width = 100; this.dataGridView1.Columns[3].Width = 100; this.dataGridView1.Columns[4].Width = 176;
I need to populate tables in my MS SQL 2000 DB with content from an excel file. I am not sure how this is done or how to format the excel file. If someone could help me with this it would be much appreciated!Thanks!
Hey guys, I'm an old DevShed member, but my old account isn't working for some reason, so I had to recreate..
I've recently decided to learn MS SQL, and having some trouble with creating and populating tables. Using MS SQL Express 2005.
Heres the code, I keep reading through my notes on how to do it, but I cant see what I'm doing wrong. This is my first attempt at it, so there may be more wrong that I think.
Code:
drop table Property_rental; drop table Property_type; drop table Property_owner; drop table Staff; drop table Tenant; drop table Tenant_category;
Msg 547, Level 16, State 0, Line 55 The INSERT statement conflicted with the FOREIGN KEY constraint "Ten_Prop_fk". The conflict occurred in database "master", table "dbo.Property_rental", column 'ID'. The statement has been terminated.
Msg 547, Level 16, State 0, Line 56 The INSERT statement conflicted with the FOREIGN KEY constraint "Ten_Prop_fk". The conflict occurred in database "master", table "dbo.Property_rental", column 'ID'. The statement has been terminated.
Msg 547, Level 16, State 0, Line 57 The INSERT statement conflicted with the FOREIGN KEY constraint "Ten_Prop_fk". The conflict occurred in database "master", table "dbo.Property_rental", column 'ID'. The statement has been terminated.
Msg 547, Level 16, State 0, Line 58 The INSERT statement conflicted with the FOREIGN KEY constraint "Ten_Prop_fk". The conflict occurred in database "master", table "dbo.Property_rental", column 'ID'. The statement has been terminated.
Msg 547, Level 16, State 0, Line 59 The INSERT statement conflicted with the FOREIGN KEY constraint "Ten_Prop_fk". The conflict occurred in database "master", table "dbo.Property_rental", column 'ID'. The statement has been terminated.
Msg 547, Level 16, State 0, Line 60 The INSERT statement conflicted with the FOREIGN KEY constraint "Ten_Prop_fk". The conflict occurred in database "master", table "dbo.Property_rental", column 'ID'. The statement has been terminated.
Msg 547, Level 16, State 0, Line 61 The INSERT statement conflicted with the FOREIGN KEY constraint "Ten_Prop_fk". The conflict occurred in database "master", table "dbo.Property_rental", column 'ID'. The statement has been terminated.
Msg 547, Level 16, State 0, Line 82 The INSERT statement conflicted with the FOREIGN KEY constraint "Prop_Staff_fk". The conflict occurred in database "master", table "dbo.Staff", column 'STAFFID'. The statement has been terminated.
In 2000, BCP seemed the way to go. DTS packages would also work. My question is, in 2005, what is the best choice? I seem to remember that BCP ignored all referential integrity constraints, and applying them afterwords was a royal pain. I'm not a BCP expert by any means. Running this at the command line means using the DOS prompt correct?
I have 14 Windows folders containing a mix of Word and PDF documents. Each folder contains up to 500,000 files and these documents are the source for a document management system.
I need to create an audit table which can take the file names and date modified for every document in each folder but I want to avoid having to do a DOS command like dir *.* > filenames.txt then importing as a text file 14 times. Is there a way of automating this in T-SQL?
Each Windows folder is named by year e.g. 2002Docs, 2003Docs, 2004Docs etc.
Documents within the folders are named like this - 20020401_doc1.doc, 20020401_doc2, 20020401_doc678.pdf etc.
I created a Fact Table with 3 Keys from dimension tables, like Customer Key, property key and territory key. Since I can ONLY have one Identity key on a table, what do I need to do to avoid populating NULLs on these columns..
I have created several global temp tables to cache some intermediate results ... However, it seems that after a while those tables will be dropped by SQL Server 2005 automatically (I have not restarted the server and no drop table statement ever executed against those tables). Is this a feature by design? How to make those global temp tables persistence to next service restart?
i need to insert data into 2 tables. first in one, and the id of the register i just inserted is a field from the register in the other table (+ other data). inserting in this 2 tables should be invisible to the user so it has to be done automatically. the dumb way i guess would be using 2 ADODB.recordsets (rs,rs1). first insert in one store the id in a var (after rs.update, rs.movelast, var=rs.fields("id")) and after this inserting a register in the new recordset (rs1)
Hello,I have 4 tables having Customer, Customer_personal_info, Customer_Financial_info, Customer_Other_infoIn this Customer table had a primary key CustomerID , related with every other table with fkey.I want to insert data into four tables using one form having TABs .I created class and storedProcedures to insert row for each table.How to execute all four classes using beginTrans-commitTrans-Rollback-EndTrans. Thanking you,
Hello all, I have a DTS package set up to import a text file on a daily basis. I need to dump the data in 2 table after 7 days of the last import .this is the code that I have Delete From TblTemp date(Day(-7), CurrentStamp). But for some reason it deleting the data right after it imports it. And it doesn't delete anything out of the other table.
Hi: I have 3 tables namely: 1 Category(CategoryID(int), CategoryName(varchar), 2 SubCategory( CategoryID(int),SubcategoryID(int),SubcategoryName) 3 Productlist (ProductID(int),ProductName(varchar),CategoryID(int), CategoryName(varchar),SubcategoryID(int),SubcategoryName(varchar)) how to delete correspoding subcategories of category from SubCategory,Productlist tables using triggers Ex: Category :TV Subcategory:ColorTV,Plasma,LCD...Plz Send me the query.... Thanks
I'm having a problem retrieving information from two different tables. Everytime i run a query which i type a source id into a textbox my page keeps timing out. What could be the problem? The tables i'm pulling from is profiles and phone. Here is the code. If someone could tell me what's going on id apperciate it. Thanks!
Dim queryString As String = "SELECT [profiles].[date_added], [profiles].[source_id], [RP_profiles].[fnam"& _"e], [profiles].[lname], [profiles].[title], [phone].[number], [RP_phone"& _"].[source_id] FROM [profiles], [phone] WHERE ([profiles].[source_id] = "& _"@source_id)"
Hi I have a 2 Tables EMP, STU In EMP Table there is a Column "Country" In STU Table there is a Column "City" Where the EMPID = STUID on this conditon how can i update those 2 columns
This is for one Table one column update how can i do 2 at a time I don't want to do in 2 seperate UPDATE statements
UPDATE EMP SET EMP.Country = 'USA' WHERE EMP.EMPID = STU.STUID
I receive the following result set from TableA (In Time)
7/9/2013 9:27:00.000 AM 7/9/2013 10:24:00.000 AM 7/9/2013 11:25:00.000 AM 7/9/2013 1:23:00.000 PM 7/10/2013 7:27:00.000 AM
Then we receive the following result from TableB (Out Time)
7/9/2013 9:30:00.000 AM 7/9/2013 10:29:00.000 AM 7/9/2013 1:37:00.000 PM [NULL] [NULL]
We may not always get Out Times in TableB so I want to merge these into one table to have the In Time and Out Time in separate columns in that one table. In this example with the red type those should be In Time and Out Time for mapped unique identifiers from each table and yet the purple color coded example would have an In Time of 11:25 AM and the Out Time would remain as NULL.
I am using this block of code but is not working the way I want it to because the 11:25am In Time is getting mapped to the 1:37pm Out Time.
and out_time = (select min (out_time) FROM tableB WHERE tableB.record# = tableA.record# and tableB.loc_id = tableA.loc_id
GROUP BY tableB.record#, tableB.loc_id )
It seems I need to focus on the minimum datediff for each record line but can't figure that part out.
I have 3 tables . iwant to delete rows from all the three tables at same time using single statement.All the 3 tables have a unique column which will be supplied ny the user. DELETE FROM T1,T2,T3 WHERE column1='1' how do i do it.
I have a formview that uses a predefined dataset based on a cross table query. When the formview is in insert mode I need to insert the data into two seperate tables. Essentially I have tblPerson and tblAddress and my formview is capturing username, password, name, address line1, address line 2, etc. I presume I need to use a stored procedure to insert a row into tblPerson and then insert a row intp tblAddress. This is easy enough to do but the tables use RI and tblPerson has an imcremental primary key which needs to be innserted into a foreign key field in my address row. How do I do this? I'm using SQL Server.
We have a project developed on asp.net 3.5 with SQL Server 2008 R2 as back end database. One of our client is facing issue of system performance in the afternoon time only. Mostly the tables are getting locked for unlimited time and system gets very slow. Need a professional SQL Server DBA to identify the root cause.
We have transactional replication running with a seperate publisher/distributor/subscriber. I want to add a couple of articles to the publication, and then initialise them. I have added the articles and run sp_refreshsubscriptions
I now want to refresh the subscriptions. I have selected not to lock the tables on the snaphot tab of the publication properties, but whenever I run the snapshot agent it locks the application solid! Its odd, as soon as I run the snaphot agent, the phones start ringing within minutes. The application is Great Plains and I have set the snapshot agent to run nightly anyway.
Is there any way I can run the snapshot agent during working hours to refresh this one article? Once I have successfully done this, I have a number of articles want to add - but I can't lock the tables when refreshing the initial snaphot.
