I have a rs report with a parameter(named Site) that is defined as multi-value. What I am trying to do is call the report from an html form with the parameter populated with a comma seperated list of values. The html code is a minimally modified version of the code found in ch. 11 of the hitchhikers guide(code included below after the solid line). If I don't select any items, then execution is fine.
View 6 RepliesHere's tricky one.
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
Essentially, I want to create a for each loop.
Any ideas?
Is there a limit to how many items you can have in a multi value param list. I have 20 items in an activity type param and when I chose "Select All" and run the report, it doesn't return. I opened profiler and picked up the following statement sent to SQL:
exec sp_executesql N'SELECT de.employeenumber as Employee_Id,de.employeelastname + '', '' + de.employeefirstname + '', '' + case when de.employeemiddlename=''N/A'' then '''' else de.employeemiddlename end as Employee_Name,da.activitytype as Activity_Type,da.activitycode as Activity_Code,da.activityname as Activity_Name,dd.fulldate as Completion_Date,das.currentattemptstatus as Current_Attempt,das.successstatus as Success_Status,das.completionstatus as Completion_Status,das.registrationstatus as Registration_Status,fa.score as Score,fa.dimgradeid as GradeId
FROM dimemployee de inner join factattempt fa on (de.dimemployeeid = fa.dimemployeeid) inner join dimattemptstatus das on (fa.dimattemptstatusid = das.dimattemptstatusid) inner join dimactivity da on (fa.dimactivityid = da.dimactivityid) inner join dimdate dd on (fa.attemptenddateid = dd.dimdateid)
WHERE
de.employeenumber = (@EmployeeId) and da.activitytype in (N''CBT'',N''Course'',N''Dart'',N''Discuss'',N''Document'',N''Evaluator'',N''JPM'',N''Lesson Plan'',N''Module'',N''Observation'',N''Procedure'',N''PSG'',N''Qual'',N''Read'',N''Reference'',N''Session'',N''Sign-off'',N''Simulator'',N''Task'',N''Trainer'')
and das.isvalidattempt = ''Yes'' and ((@LastAttempt=1 and das.currentattemptstatus = ''Yes'') or (@LastAttempt=0 and das.currentattemptstatus in (''Yes'',''No''))) and das.lmsmartcompletionstatus in (@CompletionStatus) and (dd.fulldate >= @StartDt or @StartDt is NULL) and (dd.fulldate <= @EndDt or @EndDt is NULL)
ORDER BY de.employeefirstname + '' '' + de.employeelastname,da.activitytype,da.activityname,dd.fulldate',N'@EmployeeId int,@LastAttempt nvarchar(1),@CompletionStatus nvarchar(10),@StartDt nvarchar(4000),@EndDt nvarchar(4000)',@EmployeeId=108001,@LastAttempt=N'1',@CompletionStatus=N'Successful',@StartDt=NULL,@EndDt=NULL
If I take any one of the items in "da.activitytype in" out (for example....N''Trainer'')...the query is fine. But if I run it as is, it never returns. I have also reduced the number of items in the MVP to 19 and "Select All" and it runs fine...it just bombs when I have 20 and Select All. Any ideas?
Hi,
I'm exporting some data from a table to fixed-width file using SSIS.
The query inside the package is:
SELECT col1, col3, col6 FROM Table1
WHERE code = 5 AND status = 'S'
The 'code' value will be passed from the front-end.
How can I make the query dynamically take the 'code' value and export to a file?
If a user selects 'code' as 7 , then the query should change to
SELECT col1, col3, col6 FROM Table1
WHERE code = 7 AND status = 'S'
and with this it has to export to a file.
Is this possible? If so, any suggestions on how to do it? !!!
Thanks,
Siva.
While debugging a stored proc in Sql Query Analyser i have to pass value to stored proc param which is of datatype datetime
i passed it as '03/31/2003'
it's giving error "[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification"
if i make it null it's working fine
pls suggest which date format value supposed to supply for datetime param to run debugging successfully
CREATE TABLE Test
(
EDate Datetime,
Code varchar(255),
Cdate int,
Price int
);
[Code] ....
Now I have to pass multiple param values to it. I was trying this but didnt get any success
exec
[SP_test]'LOC','LOP'
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
I have a query :Exec 'Select * From Receiving Where Code In (' + @pCode + ')'@pCode will contain more than one string parameter, eg : A1, A2, A3How can i write that parameters, I try use :set @pCode='A1','A2','A3'but get an error : Incorrect syntax near ','Please help meThanks
View 10 Replies View RelatedHello,
I am forced to use a Sp in teh first place as my query is too long for the text dataset. I have a parameter Time_Period which ia a multivalued one but it is not allowing me to use this in the SP. using RS 2005.
Any help appereciated.
Thanks
Hi folks,
I am trying to create a SSRS subscription from an asp.net app. I collect the parameter values from the client and make the arrangements to send them to the CreateSubscription method. When the report has single value parameters, my code works perfectly. But if there is a report param with multiple values, I get the error
System.Web.Services.Protocols.SoapException: Default value or value provided for the report parameter '<paramName>' is not a valid value
My parameter is string type and supports multiple values. I am passing the following string as its Value:
AVA,BEL,CAL,CAP,CCA,CEL,COC,COM,ECE,EDT,EMC,EMT,EPB,EPC,EPM,EPO,EPS,ETB,MET
where each element separated by comma is a valid param value. Here´s the code I use to set the params values before the call to CreateSubscription:
Dim ReportParams As New NameValueCollection
ReportParams = Session("ReportParams")
NumeroParametros = ReportParams.Count
Dim parametrosRpt(NumeroParametros - 1) As ReportService2005.ParameterValue
For i = 0 To NumeroParametros - 1
Dim parameter As New ReportService2005.ParameterValue()
parameter.Name = ReportParams.GetKey(i)
parameter.Value = ReportParams(i)
parameter.Label = Nothing
parametrosRpt(i) = parameter
Next
RS.CreateNewSubscription(Session("Reporte"), "Some description", scheduleXml, txtPara.Text, _
txtCopia.Text, txtCopiaOculta.Text, txtAsunto.Text, comboFormato.SelectedValue, memoCuerpo.Text, _
parametrosRpt)
Getting nuts on this one. Any help/code samples will be greatly appreciated.
Cato
I've seen some theads on this but cant seem to get this right. Report A has 5 parameters 2 of them are multi value-- when I click on part of Report A I want to jump to report B and pass all parameter values from report A. The single value ones work but multi value only passes on value and not all values selected-- what am I missing here? Do I need to pass the values in the multi value parameters in an array??
thanks
k
I wrote a Stored Procedure spMultiValue which takes Multi Value String Parameter "Month". The stored procedure uses a function which returns a table. when I Execute the stored procedure from SQL Server 2005 with input "January,February,March" everything works fine.
In the dataset , I set command type as Text and typed the following statement.
EXEC spMultiValue " & Parameters!Month.Value &"
its not returning anything.
can anyone tell me how to pass multivalue parameter to stored procedure.
Thanks for your help.
Hello,
I have report A and Report B. In Report A I am using the Jump to Report functionality to go to Report B. I have a multi-valued parameter in botht the reports. So In Parmeters I am giving
Parameters!xx.value to pass the value from Report A to Report B. The multi valued parameter has values 1,2,3,4 in both the reports.
I have a scenario where I need to pass a value of 5 to the report B. When I try to hard code the value I run into error while going to the second reeport saying parameter not declared.
Can any one help me with this. Its very urgent.
Thanks,
SqlNew
I have a multi-valued parameter that I want to pass to a subreport. The values are 11, 12, 13, and 14.
So here's what I've done:
1. For the properties of the clickable field of the first report, I have gone to the Navigation tab and chosen the subreport in the "jump to report" pulldown.
2. Then I clicked on the Parameters button and added a parameter name for the multi-valued parameter I am trying to send. For the Parameter value, I have tried 11,12,13,14. I have also tried =Split(11,12,13,14)
3. On the subreport, I create a report parameter with the same name, data type is string, multi-value is checked, and the available values pulldown is populated by a query.
So I run the first report and click on the link that brings me to the subreport, but all the subreport shows is the results for 11, not 12, 13, and 14.
How can I get the second report to understand that I want it to show all the records related to 11, 12, 13, and 14? If I bypass the first report and simply use the drop-down to choose 11, 12, 13, and 14 in the subreport, it works fine. I just can't seem to figure out how to correctly have the first report tell the subreport that it wants 11, 12, 13, and 14.
Thanks in advance for any advice!
Dan
Hello. We are using asp .net and reporting services, and trying to pass a multi-value parameter into reporting services that will show data for multiple branches.
Dim paramList As New Generic.List(Of Microsoft.Reporting.WebForms.ReportParameter)
paramList.Add(New Microsoft.Reporting.WebForms.ReportParameter("BranchNumber", 1))
ReportViewer1.ServerReport.SetParameters(paramList)
pInfo = ReportViewer1.ServerReport.GetParameters()
Let me know if you have any suggestions!
Thanks.
Hi,
I've been asked to set up a data driven subscription for a number of reports which use multi value parameters. For example, show me all transactions against the following departments: IT, Building Services, Accounts.
As an interactive report it's simple, the user just selects the relevant departments, but as a data driven subscription I can't seem to find the correct format to pass the selections through.
Has anyone tried this before?
Thanks,
Dan
I have designed a report that allows the user to select multiple values to be passed to SSRS. When I deploy and run the report from Report Manager I can select 1 to n values and then run the report. It works great. Now I attempt to call Reporting Services from my Web Site. I format the URL and attempt to pass the mutliple values in the URL. An example would be http://YadaYada&rs:Command=Render&rs:Format=HTML4.0&rcarameters=false&OrderTypeID='1,2' The report uses a Stored Procedure that is expecting @Ordertype Varchar(1000). And Yes, the Stored Procedures handles the multiple values being passed to it. What I receive is an error message (rsReportParameterTypeMismatch). Any suggestions on how to pass these values?
Thanks in Advance
Tom
I have a sp where query is as below.
DECLARE @ServerCIName varchar(5000)
SELECT * FROMÂ dbo.INC
WHERE Status in ('Assigned','In Progress','Pending')
and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%'
and (select DATEADD(dd, DATEDIFF(dd, 0, (Submit_Date)), 0)) = (select DATEADD(dd, DATEDIFF(dd, 0, getdate()), 0))
In place of "and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%' ", if I use "and Description like '%' + @ServerName + '%' " and pass a single value, it works.
But @ServerName contains multiple values and it is dynamic (not constant).
How do I query the data?
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
Disaster Recovery Options based on the following criteria.
--Currently running SQL 2012 standard edition
--We have 18000 databases (same schema across databases)- majority of databases are less than 2gb-- across 64 instances approximately
--Recovery needs to happen within 1 hour (Not sure that this is realistic
-- We are building a new data center and building dr from the ground up.
What I have looked into is:
1. Transactional Replication: Too Much Data Not viable
2. AlwaysOn Availability Groups (Need enterprise) Again too many databases and would have to upgrade all instances
3. Log Shipping is a viable option and the only one I can come up with that would work right now. Might be a management nightmare but with this many databases probably all options with be a nightmare.
More often than not, I typically don't touch DTC on clusters anymore; however on a project where the vendor states that it's required. So a couple things here.
1) Do you really need DTC per instance or one for all?
2) Should DTC be in its own resource group or within the instance's group?
2a) If in it's own resource group, how do you tie an instance to an outside resource group? tmMappingSet right?
the stored procedure don't delete all the records
need help
Code Snippet
DECLARE @empid varchar(500)
set @empid ='55329429,58830803,309128726,55696314'
DELETE FROM [Table_1]
WHERE charindex(','+CONVERT(varchar,[empid])+',',','+@empid+',') > 0
UPDATE [empList]
SET StartDate = CONVERT(DATETIME, '1900-01-01 00:00:00', 102), val_ok = 0
WHERE charindex(','+CONVERT(varchar,[empid])+',',','+@empid+',') > 0
UPDATE [empList]
SET StartDate = CONVERT(DATETIME, '1900-01-01 00:00:00', 102), val_ok = 0
WHERE charindex(','+CONVERT(varchar,[empid])+',',','+@empid+',') > 0
TNX
Hello,I am trying to construct a query across 5 tables but primarily 3tables. Plan, Provider, ProviderLocation are the three primary tablesthe other tables are lookup tables for values the other tables.PlanID is the primary in Plan andPlanProviderProviderLocationLookups---------------------------------------------PlanIDProviderIDProviderIDLookupTypePlanNamePlanIDProviderStatusLookupKeyRegionIDLastName...LookupValue....FirstName...Given a PlanID I want all the Providers with a ProviderStatus = 0I can get the query to work just fine if there are records but what Iwant is if there are no records then I at least want one record withthe Plan information. Here is a sample of the Query:SELECT pln.PlanName, pln.PlanID, l3.LookupValue as Region,p.ProviderID, p.SSNEIN, pl.DisplayLocationOnPCP,pl.NoDisplayDate, pl.ProviderStatus, pl.InvalidDate,l1.LookupValue as ReasonMain, l2.LookupValue as ReasonSub,pl.InvalidDataFROM Plans plnINNER JOIN Lookups l3 ON l3.LookupType = 'REGN'AND pln.RegionID = l3.Lookupkeyleft outer JOIN Provider p ON pln.PlanID = p.PlanIDleft outer JOIN ProviderLocation pl ON p.ProviderID = pl.ProviderIDleft outer JOIN Lookups l1 ON l1.LookupType = 'PLRM'AND pl.ReasonMain = l1.LookupKeyleft outer JOIN Lookups l2 ON l2.LookupType = 'PLX1'AND pl.ReasonSub = l2.LookupkeyWHERE pln.PlanID = '123456789' AND pl.ProviderStatus = 0ORDER BY p.PlanID, p.ProviderID, pl.SiteLocationNumI know the problew the ProviderStatus on the Where clause is keepingany records from being returned but I'm not good enough at this toanother select.Can anybody give me some suggestions?ThanksDavid
View 5 Replies View RelatedI would like to test following DMX, but it seems like we cannot use @param in DMX. If i indeed need what other tricks can avoid this constraint?
Declare @HCVS_MemberId nvarchar(15);
INSERT INTO test
(HCVS_MemberId, HCVS_MeasureDate, SysPressure, DiaPressure, Pluse)
OPENQUERY(Healthcare,
'SELECT TimeIndex, Quantity
FROM v_VitalSignForecast
WHERE HCVS_MemberId=@HCVS_MemberId AND HCVS_MeasureDate>=@From AND HCVS_MeasureDate<=@To')
Thanks,
Ricky.
is there a way in t-sql to pass a db name as a parameter, so that select * from [@passedDB].[dbo].[tableName] would work? Without dynamically building and executing the sql statement?
View 1 Replies View RelatedThe following stored procedure sets a value for the @@RowCount global variable.
How do I make use of it in the Data Access Layer?
When I set the SPROC as the source for the object, the value numberRows does not appear to be an option. In the end I just want to set the value of @@RowCount to a Label.Text
What should I do?ALTER PROCEDURE dbo.ap_Select_ModelRequests_RequestDateTime
@selectDate datetime
,@selectCountry Int
AS
SELECT DISTINCT configname FROM ModelRequests JOIN
CC_host.dbo.usr_cmc As t2 ON
t2.user_id = ModelRequests.username JOIN
Countries ON
Countries.Country_Short = t2.country
WHERE RequestDateTime >= @selectDate and RequestDateTime < dateadd(dd,1, @selectDate)
AND configname <> '' AND interfacename LIKE '%DOWNLOAD%' AND result = 0 AND Country_ID = @selectCountry
ORDER BY configname
SELECT @@RowCount As numberRows
GO
I'm working with a dataset something like this:
TypeID Sales($)
------ -------
1 123.45
1 47.98
2 9.21
3 87.23
3 99.88
4 123.43
And a multivalued parameter that lets the user select which TypeIDs specifically he wants to see:
ParamID ParamValue
1 Q1
2 Q2
3 Q3
4 Q4
And in my Report, I have data showing up something like this:
CountofAllSales: 6
SumOfAllSales: 491.18
CountofCustomSales: (count of sales with type specified in parameter)
SumOfCustomSales: (sum of sales with type specified in parameter)
The count and sum of custom sales should show -ONLY- the numbers from the TypeIDs selected in the multi-value parameter. But the CountAll and SumAll show everything, regardless. This is where I run into problems. I can't seem to find an "in" clause in the SSRS expressions. If the TypeID parameter was single value, I could write something like this
Expression for CountOfCustomSales:
=SUM(iif(Fields!TypeID.Value = Parameters!TypeID.Value, 1, 0))
However, since its multi-valued, that won't work. You'd have to write something like:
=SUM(iif(Fields!TypeID.Value = Parameters!TypeID.Value(0), 1, 0)) +
SUM(iif(Fields!TypeID.Value = Parameters!TypeID.Value(1), 1, 0)) +
....
SUM(iif(Fields!TypeID.Value = Parameters!TypeID.Value(length), 1, 0))
And obviously this doesn't work when you don't know exactly how many elements are going to be selected.
What would be ideal would be something like an "in" clause, but I can't find any such functionality or think how to write my own function:
=SUM(iif(Fields!TypeID.Value in
Parameters!TypeID.Values, 1, 0))
Short of modifying the StoredProc itself (and for me, that means red tape. :( :( ) can anyone think of a way to count/sum only the values specified in an MVP??
Hi AllMy query is as follows:SELECT STRINGTEXT, TOKENIDFROM WEBSTRINGSWHERE TOKENID IN (6,20,234,19,32,4,800,177)All I want is my resultset to come back in the order that I have defined inthe IN clause, but unfortunately SQL is trying to be too helpful and sortsthe numbers in the IN clause so that the resultset comes back with a TOKENIDorder of 4,6,19,20,32,177,234,800.I don't want this bloody order I want 6,20,234,19,32,4,800,177!!Sorry for my rant, but its got my hot under the collar.Is there anyway round this?ThanksYobbo
View 3 Replies View RelatedHello....
I am trying for several weeks to figure out how can I create a stored procedure with parameters that returns all rows from a column (even then Nulls) when the parameter value is not set (or is '%', or anything tha might be. In a few words, in case the user hasn't input any data).
I 've created a WHERE clause that goes like this: WHERE fieldName LIKE @param + N'%' OR IS NULL
Well this query returns all rows in case the user hasn't input data but if the user inputs data it returns the correct rows but it is also returns null fields.
Thanks a lot in advance!
Manolo....
Is it possible to take a report input parameter and display it at the top of the report? StartDate/EndDate are two input params for my report that would be nice to display at the top.
thanks
(Reporting Services 2005)
I am new to Reporting Services and hope that what I am looking to do is within capabilities :-)
I have many identical schema databases residing on a number of data servers. These support individual clients accessing them via a web interface. What I need to be able to do is run reports across all of the databases. So the layout is:
Dataserver A
Database A1
Database A2
Database A3
Dataserver B
Database B1
Database B2
Dataserver C
Database C1
Database C2
Database C3
I would like to run a report that pulls table data from A1, A2, A3, B1, B2, C1, C2, C3
Now the actual number of servers is 7 and the number of databases is close to 1000. All servers are running SQL2005.
Is this something that Reporting Services is able to handle or do I need to look at some other solution?
Thanks,
Michael
I've got a stored procedure and one of the parameters is a DateTime. But no matter what I do to the string that's passed into the form for that field, it doesn't like the format. Here's my code: SqlConnection conn = new SqlConnection(KPFData.getConnectionString());
SqlCommand cmd = new SqlCommand("KPFSearchName", conn);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter param = cmd.Parameters.Add("@DOB", SqlDbType.SmallDateTime);
param.Direction = dir;
param.Value = txtDOB.Text;
// also have tried this:
param.Value = Convert.ToDateTime(txtDOB.Text);
// and
param.Value = Convert.ToDateTime(txtDOB.Text).ToShortDateString;
No matter what I do I always get a formatting error - either I can't convert the string to a DateTime, or the SqlParameter is in the incorrect format, or something along those lines. I've spent a couple hours on this and hoping someone can point out my obvious mistake here...??Thanks for your help!!eddie
Hello,
I have a table with a foreign key field. I need to retrieve all the records where the foreign key matches any of a set. In plain ol' SQL this is accomplished with the IN(a,b,c) statement but I can't get that to work in a stored procedure.
How would I do this? I can imagine that I could parse the input string and create a temporary table and use that to do a join but that seems rather convoluted.
Any tips highly appreciated! If I'm not being clear I'll gladly post more details.
Thanks,
Noc
PS SQL 2000, ASP.NET 1.1, VS 2003.