Populating Empty Table With Sequential Numbers?
Jan 15, 2015
I have a column within a table which is already truncated/deleted all records within (Microsoft SQL 2008). I have to now populate the column with sequential numbers up to 50,000 records arbitrary numbers (doesn't mater) up to 7 characters.
what SQL statement I need to write that will automatically polulate the newly empty table with A000001,A0000002,A0000003, or any form for that matter etc so that I can sort number the records within the table.
I have approximately 50000 records which I need to sequentially entered and I really dont want to number the column manually via hand editing.
View 5 Replies
ADVERTISEMENT
Mar 11, 2008
I have a table with a column ID of ContentID. The ID in that column is all NULLs. I need a way to change those nulls to a number. It does not matter what type of number it is as long as they are different. Can someone point me somewhere with a piece of T-SQL that I could use to do that. There are over 24000 rows so cursor change will not be very efficient.
Thanks for any help
View 6 Replies
View Related
Aug 29, 2013
I have a table of id numbers that I wish to mask. My thought was to create a new column for this new id number and populate it with a unique sequential value - start at 1 and go as high as needed. My problem is that I cannot recall how to populate that column with a number...
View 4 Replies
View Related
Apr 27, 1999
I have a query which returns information about transactions similar to this:
Select account, trans_code, quantity
from ledger_table
This returns something like:
acct trans_code quantity
----- ---------- ------------
2 2 1000
2 3 500
2 3 300
3 2 100
3 2 500
etc.
What I need to do is add a lot number for each acct/trans code type. This is merely a sequential number for the transaction. This changes the output as follows:
acct trans_code quantity lot
----- ---------- ------------ ---
2 2 1000 1
2 3 500 1
2 3 300 2
3 2 100 1
3 2 500 2
3 3 1000 3
3 5 200 1
etc.
The lot number is reset for each grouping.
Does anyone have a way to do this outside of a cursor or temp table?
TIA, any help greatly appreciated.
View 1 Replies
View Related
Mar 17, 2004
I am trying to automatically insert records into my existing customer table. Is there a way when I insert these new records and assign the customer number that it can sequentially pick the next available unique customer number for each record that is inserted? for example the first record would be customer number 100, the next 101, and so on? Please advise.
View 4 Replies
View Related
Oct 25, 2013
I have a table with 13,000 rows, in one column called Prioirty each row has a value of 1.
Is it possible to use SQL to replace all of these '1' values with a sequential list. Example 1,2,3,4,5,6,7....all the way to 13,000?
View 3 Replies
View Related
Jul 23, 2005
I am using sybase aSE12.5. I have a table with only one column withdatatype char(2). when i query this table to select all the records, ishould get these records in the ascending order and they should be numbered, i.e, the o/p should look something like thiscolumn_name------ --------1 AB2 AC3 ADand so on.I cannot add an extra column and i need this to be done in a single query.--Message posted via http://www.sqlmonster.com
View 2 Replies
View Related
Jul 20, 2005
I have a temp table that's populated with an insert query in as toredprocedure. The temp table has a uniqueID as the primary key.In that table I have a column SortOrder.What I want to do is to create a sequential number in SortOrder butonly for records matching a WHERE statement, for example:(pardon the shorthand...)Insert *.tblPermanent into tblTempIf myField = 1 thenSortOrder = 1(2,3,4,5,.....etc.)elseSortOrder = 0Thankslq
View 1 Replies
View Related
Jul 20, 2005
I have a database that is pre-populated with sequential part numbers.As people reserve the parts I update a flag to show the # is no longeravailable. Now they want the ability to take out a block of "x"number of sequential part numbers - say for example 5.If my database had the following numbers available:101104105110111112113114It should return 110 thru 114 and then I would write an update queryto change the flags to 1 (checked out).I have only been able to return the first "x" number of records - havenot been able to make sure they are stepped sequentially - with thefollowing:SELECT ID_ITEM From PARTNO_CHKOUT_SPECIAL M Where (Select Count(*)FROM PARTNO_CHKOUT_SPECIAL NWHERE N.ID_ITEM <= M.ID_ITEM) >= 0 AND TYPE_REC=1 ANDFLAG_CHECKED_OUT=0 {maxrows 5}The above would return 101, 104, 105, 110, 111I tried using an (N.ID_ITEM+1)-M.ID_ITEM=0 to try stepping and geterrors, probably incorrect syntax. Can I do this in an SQL statement?
View 6 Replies
View Related
Feb 18, 2008
Here is my problem. I have a table with 4 columns id1,id2,id3,boxnum. Here is some sample data.
id1 id2 id3 boxnum
1 1 1
1 1 1
1 2 1
1 2 1
1 2 1
2 2 2
2 3 4
What I need is to be able to update boxnum with sequential numbers based on the unique set of values from the id columns. So my output would be this.
id1 id2 id3 boxnum
1 1 1 1
1 1 1 2
1 2 1 1
1 2 1 2
1 2 1 3
2 2 2 1
2 3 4 1
View 6 Replies
View Related
May 2, 2006
Hi,
Can anyone tell me offhand the simplest/most elegant way of updating an integer column to a sequential column of numbers with a query?
e.g given
intval | Description| Cost
0 | Descvalue0| 4.32
2 | Descvalue2| 4.33
3 | Descvalue3| 4.34
8 | Descvalue8| 4.35
change it to:
intval | Description| Cost
0 | Descvalue0| 4.32
1 | Descvalue2| 4.33
2 | Descvalue3| 4.34
3 | Descvalue8| 4.35
I think it might need a stored proc..
Many Thanks
greg
View 2 Replies
View Related
Apr 5, 2014
I have a problem. In my database I have the following numbers available:
101
104
105
110
111
112
113
114
What I need is to get a select query with records and sequentials numbers after it like:
101 0
104 1 (the number 105)
105 0
110 4 (the numbers 111,112,113,114)
111 3 (the numbers 112,113,114)
112 2 (the numbers 113,114)
113 1 (the numbers 114)
114 0
How can I do It?
View 2 Replies
View Related
May 9, 2007
***** SQL Server 2005 ********
I have a table that needs to be updated with a sequential number based on criteria.
I am trying to update the SeqID and LinkSeqID with the same sequential number if the ProductID and StoreID are in the same group. For instance the 1st three rows below are in the same group 752534 and 4, therefore the SeqID and LinkSeqID should be 1,2,3 and restart at 1 once the grouping of ProductID and StoreID changes. Please look at the examples below.
SALES Table as IS:
======================================
ProductID StoreID DBRowID SeqID LinkSeqID
======================================
752534 4 1
752534 4 2
752534 4 3
896784 2 4
896784 2 5
896784 4 6
898874 2 7
898968 2 8
This is what the table should look like after the update in complete.
SALES after UPDATE:
======================================
ProductID StoreID DBRowID SeqID LinkSeqID
======================================
752534 4 1 1 1
752534 4 2 2 2
752534 4 3 3 3
896784 2 4 1 1
896784 2 5 2 2
896784 4 6 1 1
898874 2 7 1 1
898968 2 8 1 1
Can anyone HELP me please?
View 4 Replies
View Related
Jul 20, 2005
I would like to reopen this discussion. I need to create this tableusing SQL that will return this dataset.BRAID RATEDEFID MIN(BRADATE) MAX(BRADATE RATECODE PRODNAME614 14 12/1/2002 12/4/2004 Rack BeachTower Terrace618 14 12/8/2002 12/11/2004 Rack BeachTower Terrace622 14 12/15/2002 12/19/2004 Rack BeachTower TerraceI have provided the test data below and the SP I have been working with.The SP works fine as long as there are 4 seqential dates. I getunpredictable results when the count <> 4. I am also concerned on whathappens at the end of the month. For example, 1/31/2004, 2/1/2004.Does this affect the SP? I appreciate your continued support.MichaelCREATE TABLE [dbo].[BASERATEAVAIL_Tmp] ([BRAID] [decimal](18, 0) NOT NULL ,[RATEDEFID] [decimal](18, 0) NOT NULL ,[BRADATE] [datetime] NOT NULL ,[RATECODE] [varchar] (32) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL,[PRODNAME] [varchar] (64) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL) ON [PRIMARY]GOINSERT INTO dbo.BASERATEAVAIL_Tmp(BRAID, RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (614, 14, '12/1/2002', 'Rack', 'Beach Tower Terrace');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (615, 14, '12/2/2002', 'Rack', 'Beach Tower Terrace');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (616, 14, '12/3/2002', 'Rack', 'Beach Tower Terrace');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (617, 14, '12/4/2002', 'Rack', 'Beach Tower Terrace');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (618, 14, '12/8/2002', 'Rack', 'Beach Tower Terrace');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (619, 14, '12/9/2002 ', ' Rack ', ' Beach Tower Terrace ');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (620, 14, '12/10/2002', ' Rack ', ' Beach Tower Terrace ');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (621, 14, '12/11/2002', ' Rack ', ' Beach Tower Terrace ');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (622, 14, '12/15/2002', ' Rack ', ' Beach Tower Terrace ');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (623, 14, '12/16/2002', ' Rack ', ' Beach Tower Terrace ');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (624, 14, '12/17/2002', ' Rack ', ' Beach Tower Terrace ');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (625, 14, '12/18/2002', ' Rack ', ' Beach Tower Terrace ');INSERTINTO dbo.BASERATEAVAIL_Tmp(BRAID,RATEDEFID, BRADATE, RATECODE, PRODNAME)VALUES (626, 14, '12/19/2002 ', ' Rack ', ' Beach Tower Terrace ');CREATE PROCEDURE usp @n INTASSET ANSI_WARNINGS OFFSELECT MIN( braid) AS "braid",ratedefid, ratecode, prodname,MIN( CASE n WHEN 1 THEN bradate END ) AS "min_date",MAX( CASE n WHEN 0 THEN bradate END ) AS "max_date"FROM ( SELECT t1.braid, t1.ratedefid, t1.ratecode, t1.prodname,t1.bradate,COUNT( * ) % @n AS "n",( COUNT( * ) - 1 ) / @n AS "r"FROM BASERATEAVAIL_Tmp t1INNER JOIN BASERATEAVAIL_Tmp t2ON t2.bradate <= t1.bradateGROUP BY t1.braid, t1.ratedefid, t1.ratecode, t1.prodname,t1.bradate) DGROUP BY r, ratedefid, ratecode, prodnameHAVING MAX( CASE n WHEN 0 THEN bradate END ) IS NOT NULL ;Usage:EXEC usp @n = 4--Anith*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
May 19, 2004
I have a table with a list of products,once I enter the data into the table and start using it on my web site as a drop down list,the list is sorted as an alphabetical list,is there are way to have a single drop down list but still be able to group the those products,in order words force them not to get sorted aphabetically.
Thanks
View 11 Replies
View Related
May 11, 2007
Hi, I have two tables:
1. RubricReportDetail with columns LocalPerf, Age
2. SppIndicator with columns Pct, Age
How can I populate the values of LocalPerf with Pct by matching
RubricReportDetail.Age = SppIndicator.Age ??
Please help me. Thanks in advance.
View 15 Replies
View Related
Apr 17, 2007
I am running a program that populates tables on my local database by querying another database.
View 2 Replies
View Related
May 14, 2008
Hi all,
I have a table that looks something like this: -
county fname sport
------ ----- -----
surrey tara squash
surrey tara hockey
surrey tara tennis
kent tom tennis
kent tom football
kent tom rugby
I want to read through the sport table and create a distinct list of sports which can be used to create a new table that would look like: -
County fname squash hockey tennis football rugby
------ ----- ------ ------ ------ -------- -----
surrey tara YES YES YES
kent tom YES YES YES
I am using the following code: -
DECLARE @sql NVARCHAR(MAX)
SELECT @sql = 'create table ey_report_temp (county nvarchar(100),fname nvarchar(100), ' +
STUFF((SELECT DISTINCT ',[' + sport + '] nvarchar(100) '
FROM ey_report FOR XML PATH('')), 1, 1, '') + ')'
SELECT @sql
exec sp_executesql @sql
SELECT * from ey_report_temp
--------------------------------------------
DECLARE @county nvarchar(max)
DECLARE @fname nvarchar(max)
DECLARE @sport nvarchar(max)
DECLARE merge_cursor CURSOR FAST_FORWARD
FOR SELECT county, fname, sport from ey_report
OPEN merge_cursor
FETCH NEXT FROM merge_cursor INTO @county, @fname, @sport
WHILE @@FETCH_STATUS = 0
BEGIN
select @sql = N'
update ey_report_temp
set ' + @sport + ' = ''YES''
where county = ''' + @county + '''
and fname = ''' + @fname + ''''
print @sql
exec sp_executesql @sql
if @@ROWCOUNT = 0
begin
select @sql = N'
insert into ey_report_temp (
county, fname, ' + @sport + '
) values ( ' + @county + ', ' + @fname + ', ' + @sport + ')'
exec sp_executesql @sql
end
FETCH NEXT FROM merge_cursor INTO @county, @fname, @sport
END
CLOSE merge_cursor
DEALLOCATE merge_cursor
select * from ey_report_temp
drop table ey_report_temp
This creates the new table fine however, when it trys to poulate I get the following EM, can anybody help? thanks in anticipation
(1 row(s) affected)
(0 row(s) affected)
update ey_report_temp
set squash = 'YES'
where county = 'surrey'
and fname = 'tara'
(0 row(s) affected)
Msg 128, Level 15, State 1, Line 4
The name "surrey" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
update ey_report_temp
set hockey = 'YES'
where county = 'surrey'
and fname = 'tara'
(0 row(s) affected)
Msg 128, Level 15, State 1, Line 4
The name "surrey" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
update ey_report_temp
set tennis = 'YES'
where county = 'surrey'
and fname = 'tara'
(0 row(s) affected)
Msg 128, Level 15, State 1, Line 4
The name "surrey" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
update ey_report_temp
set tennis = 'YES'
where county = 'kent'
and fname = 'tom'
(0 row(s) affected)
Msg 128, Level 15, State 1, Line 4
The name "kent" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
update ey_report_temp
set football = 'YES'
where county = 'kent'
and fname = 'tom'
(0 row(s) affected)
Msg 128, Level 15, State 1, Line 4
The name "kent" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
update ey_report_temp
set rugby = 'YES'
where county = 'kent'
and fname = 'tom'
(0 row(s) affected)
Msg 128, Level 15, State 1, Line 4
The name "kent" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
(0 row(s) affected)
View 7 Replies
View Related
Jul 9, 2006
I'm trying to do a table lookup in t-sql and runing into problems. I have two tables, City and County..
Table City:
CityID CountyID CountyName
1 3 NULL
2 2 NULL
3 1 NULL
Table County:
CountyID CountyName
1 Los Angeles
2 Contra Costs
I want to populate the NULL "CountyName" field in table City with the values from table County but I can't make it work! Any help appreciated.
Barkingdog
View 1 Replies
View Related
Feb 7, 2008
Hello,
Just when I thought I was starting to understand SSRS just a little and then I encounter a strange (maybe not too strange) of an issue.
I have a DataSet which runs a stored procedure and it requires 10 parameters. When I run it in the dataset portion itself it runs fine however, it will not work when I choose to Preview it. I refreshed my dataset and even rebooted my machine. Can anybody shed some light on this?
Thanks
View 6 Replies
View Related
Dec 30, 2007
While populating dimsnion table the requirement is that the 1st record in all dimension should be " Not Available"
and if the fact table has a null value for that dimension it shouldbe tied to " Not Available" record in dimension
Please help hwo to do both the things.
JJ
View 5 Replies
View Related
Mar 24, 2008
I have a table that I would like to update with the current dateTime of Today. The Table Field is called "DateTimeStamp" with a format of SmallDateTime -- I'm using VS 2008.
When I use the following command and then cmd.ExecuteNonQuery -- the table is correclty filled in with the exception of the DateTimeStamp field. Instead of 3/23/2008, I get the value 1/1/1900 ...
SqlCommand cmd3 = new SqlCommand("UPDATE CameraPods SET CameraBlock1_ID = 98, CameraBlock2_ID = 99, Status = 1, DateTimeStamp = 3/3/2008");
any ideas?
---Jim
View 3 Replies
View Related
Jul 12, 2004
Is there any way i could take the first 50 results of a sql query and store them into 1 table in access and take the next 50 and store them into a second table in access? Is there any SQL statement that will direct where the output gets directed
to?
OR is there a way to have the sql reults paird up with a autonumbered ID?
Doc
View 2 Replies
View Related
Oct 6, 2006
Hi,
I have a flat file with columns from a geographical hierarchy such as:
Country Zone State County City Store Sub Store , etc.
The file also has data columns for months to the right of the above columns such as:
Jul Aug Sept ......... basically 25 of these columns for two years' data for one product and another set of 25 columns for another kind of product. A typical record in the file looks like:
Country Zone State County City Store Substore
USA Southeast FL Hillsborough Tampa walmart Fletcher
May04_ProdA ....Jun06_prodA May04_ProdB...Jun06ProdB
144 160 180 158
I need to upload this data into a staging table in SQL Server 2005 using SSIS, I created a table with the geographical hierarchy columns but am trying to figure out a way to load the monthly data. I can create 50 columns for the 50 months ( 25 months for each product) but that would be very crude.
Is there a better way of inserting data from this flat file into a destination table? I need all the data in the staging table in one upload.
Thanks.
View 11 Replies
View Related
Aug 1, 2006
I am having a torrid time trying to populate a FACT table in ORACLE.
I have so far tried two approaches -
1. Identified the change type for records - meaning I mark the record as inserts or updates based on the availability of the key in the FACT table. I used a conditional split and then used two OLE DB destination tasks to load the FACT table. But this failed as I was pretty much inserting on both the conditions (inserts and updates). So this attempt would count as a batch update process attempt.
2. Tried to also write a stored procedure in ORACLE destination database and then use that stored procedure to execute record by record using OLE DB Transformation task. But this did not fly as well due to the fact that SSIS could not understand the oracle SP and could not parse the information out.
Thank you
View 1 Replies
View Related
Oct 31, 2006
In my SSIS package I used the Web Service task to populate a SSIS variable with data from an XML feed. Then in the Data Flow I used a XML Source to import that data into a table on my SQL Server. When I looked at the data i noticed that the some of the fields contained CRLF pair. These CRLF pairs are being only populated by xml nodes that contain no data and are self-terminated. Below is a sample of the XML feed that is causing the problems. the DR_M_Initial and DR_Type1 nodes are populating CRLF's to the table.
Can anybody give me some insight on this problem. I am performing a workaround using the SQL REPLACE function in an Update statement to strip out ch(10) and ch(13), but this just seems a little cluegy to me.
Sample XML
---------------------------------------------------------
<?xml
version="1.0" encoding="utf-16" ?>
- <ROOT xmlns="">
<ROWRESULT>
<DR_NUMBER>1</DR_NUMBER>
<DR_L_NAME>SMITH</DR_L_NAME>
<DR_F_NAME>JOE</DR_F_NAME>
<DR_M_INITIAL />
<DR_TYPE1 />
</ROWRESULT>
</ROOT>
Thanks,
Tim Frakes
View 1 Replies
View Related
Dec 5, 2005
Sorry I'm pretty new to SQL so I don't know if this is a simple question. I have a table, and I am trying to add a column to the table and populate this column using what would be called an 'IF' function in Excel.
Basically 'column A' has numbers in it. I want SQL to look at 'column A' and if the first 5 digits of the number in 'column A' are 00001, then put 'description A' into new column 'column B'. If the first 5 digits of the number in 'column A' are 00002, then put 'description B' into 'column A' etc.
Any ideas?
View 2 Replies
View Related
Feb 1, 2007
I have a report with a column which contains either a string such as "N/A" or a number such as 12. A user exports the report to Excel. In Excel the numbers are formatted as text.
I already tried to set the value as CDbl which returns error for the cells containing a string.
The requirement is to export the column to Excel with the numbers formatted as numbers and the strings such as "N/A' in the same column as string.
Any suggestions?
View 1 Replies
View Related
Apr 10, 2008
I'm experienced using queries to extract data, but I'm new to actually creating tables, except through Access. I work with many records of data, so populating the data by hand is not an option. I created a test database (ValTest) and a test table within that database (ClaimTest). I created a text file (DataTest.txt) with the same layout as I defined for ClaimTest. I want to populate ClaimTest with the data from DataTest.txt. I was told the only way to do that using SQL Server Express was to use a utility called BCP. So I found a page on the Microsoft website talking about BCP. It gave some examples, so I opended up the Command Line window, pointed to the directory that contains the database and text file and typed "BCP ValTest.ClaimTest in DataTest.txt -T -c". I get 3 errors: Named Pipes Provider: Could not open a connection to SQL Server [2], Login timeout expired, and An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I tried looking around and finding where I could change the settings, in case that was indeed the problem, but was unable to find anything. Does anyone have any suggestions?
Thanks
View 10 Replies
View Related
Jun 10, 2014
I created a Fact Table with 3 Keys from dimension tables, like Customer Key, property key and territory key. Since I can ONLY have one Identity key on a table, what do I need to do to avoid populating NULLs on these columns..
View 3 Replies
View Related
Sep 11, 2015
How do I correctly populate a fact table with the surrogate key from the dimension table?
View 4 Replies
View Related
Jul 20, 2005
I have a combo box where users select the customer name and can eithergo to the customer's info or open a list of the customer's orders.The RowSource for the combo box was a simple pass-through query:SELECT DISTINCT [Customer ID], [Company Name], [contact name],City,Region FROM Customers ORDER BY Customers.[Company Name];This was working fine until a couple of weeks ago. Now wheneversomeone has the form open, this statement locks the entire Customerstable.I thought a pass-through query was read-only, so how does this do atable lock?I changed the code to an unbound rowsource that asks for input of thefirst few characters first, then uses this SQL statement as therowsource:SELECT [Customer ID], [Company Name], [contact name],City, Region Fromdbo_Customers WHERE [Company Name] like '" & txtInput & "*' ORDER BY[Company Name];This helps, but if someone types only one letter, it could still bepulling a few thousand records and cause a table lock.What is the best way to populate a large combo box? I have too muchdata for the ADODB recordset to use the .AddItem methodI was trying to figure out how to use an ADODB connection, so that Ican make it read-only to eliminate the locking, but I'm striking outon my own.Any ideas would be appreciated.Roy(Using Access 2003 MDB with SQL Server 2000 back end)
View 2 Replies
View Related
Jul 22, 2012
All, Using access 2003 frontend and sql server 2008 backend. I have an append query to insert 80000 from one table to an empty table. I get an error:
"Microsoft Office Access set 0 field(s) to Null due to a type conversion failure, and didn't add 36000 record(s) to the table due to key violations, 0 record(s) due to lock violations, and 0 record(s) due to validation rule violations."
I know this error normally comes if there are dups in a field that doesnt allow.
View 1 Replies
View Related
