I have installed MS server sql 7.0 and 2000 both on my PC. The default port i know is 1433. If sql 7.0 is already installed. Which port does sql 2000 listen on.
Is there a way i can view this ?
Thanks in advance
Cheers
Hemant
Been having SQL Server 2000 running for some time now, but recently it stopped listening on TCP port 1433, the log reports its listening on shared memory, Named pipes and Rpc, but no sign of 127.0.0.1 port 1433 or any errors to say why it won't listen.
I've done a netstat -na and nothing else is listening on that port, tried restarting using the enterprise manager, gonna try restarting the entire Server when everyone has gone home, but I'm pretty sure its been restarted recently.
All the other archive logs going back a few days show its not listening.
Yes, I have used the Server network utility to make sure TCP/IP is enabled and set to 1433, even added a comma and 1434 to see if it will listen on multiple ports, no go.
Any help?
I want to know how to check whether SQL Server 2000 can listen to port 1433 or not. If I run netstat -a, am I suppose to see port 1433 regardless of what service pack I have applied to SQL Server 2000?
View 14 Replies View Relatedfor some reason i dont get any errors, but i believe that my server isnot running on port 1433. the tcpip protocol is selected in thenetwork configuration utility as well as name piper. the portselected is 1433. but when i telnet to 1433 i get the same errors as iwould if i telnet to a non existant port. i also tried nbstat with noluck. what else can i do? thanks
View 2 Replies View RelatedI've got SQL 2000 set up on a cluster running Windows 2000 Advanced Server (w/SP1).
Setup for Failover Clustering appeared to succeed normally on both nodes.
The SQL 2000 server logs show:
2001-01-11 10:02:57.82 server SuperSocket Info: Bind failed on TCP port 1433.
2001-01-11 10:02:57.85 server SQL server listening on Shared Memory, Named Pipes.
2001-01-11 10:02:57.85 server SQL Server is ready for client connections
I've checked to see if something else is using port 1433 (unlikely) and don't see anything.
The physical node that SQL 2000 is currently on has no other cluster resources assigned to it.
Any ideas?
HiI have a question regarding the SQL Server(SQL Server 7) port 1433.Some body is trying to hack into our Windows 2000 server through port1433. Is there a way i can close this port? I tried using a toolcalled Ipsecpol.exe ( Internet Protocol Security Policies Tool). Butwhen we run netstat, it still looks like they are able to connect tothe server using port 1433. Has anyone come across this problem? Iwould appreciate it very much if somebody could send in anysuggestions regarding this.Thanks,Ann
View 6 Replies View RelatedSetting: sql 2000 default instance installed. Installed a sql 2005 named instance.
I want to configure the sql 2005 instance to listen on a partcular TCP port. (I followed the instructions in KB article 177440.)
"SQL Config Manager" > Protocols for "Instance" > Right-click TCP/IP > Properties, I found about 5 IP addresses and an "IPALL" address (pretty good for a home machine with one NIC!).
Per the article, I removed the 0 from TCP Dynamic Ports and put the desired port number ("4567") in the port value, restarted the sql instance, and found this using "xp_readerrorlog" this:
......
.....
Server is listening on [ 'any' <ipv6> 4567].
Server is listening on [ 'any' <ipv4> 4567].
.....
.....
Server is listening on [ ::1 <ipv6> 49277].
Server is listening on [ 127.0.0.1 <ipv4> 49277].
It looks like my instance is now listening on the desired port (success) but also, still, using a dynamic port. Did I do something wrong or can the dynamic port simply not be eliminated?
TIA,
Barkingdog
Hi,I want the change the SQL listen port of a named 2005 sql instance.Is there a way I can run an sql query against the named instance whichgives me back which registry setting I need to use.so MSSQL.1 MSSQL.2 or MSSQL.3Or is there another way I can set the listenport through script orvbscript for only a specific named instance so if there are other sqlserver instances running they don't get affected.Thanks Bob
View 1 Replies View RelatedOk,
The Scenario is as follows:
24/7 Production Call Centre server running NT4.0 and SQL 6.5 with all the latest service packs.
SQL mail fails(with dull regularity) and the SQL server services stop.
When the SQL server Services are restarted an error message appears stating that Port 1433 is in use after which nobody can connect via TCP/IP. Obviously the port believes the previous SQL session is still running, and won't release the port to the "New Application requesting it".
On a unix system you can force a port reset so you don't need to shutdown and restart the box. Can you do this from either SQL or NT?
Any solutions would be greatly appreciated the DBA's are 100 Miles from the Servers, so restarts are reliant on other people!
Does anyone have an idea on why when using IP with port 1433 that on the SQL 2000 Server a bind failure happens on port 1433 and are not able to get to the SQL using IP but you can use Named Pipes.
Would greatly appreciate any help.
Walter
Did a search on port 1433 but nothing came up in the search.
This question is more geared to DBAs more then SQL developers.
I have a SQL 2000 server on a win2k3 machine. For some reason it will not listen in on TCP port 1433.
Shared memory and Named Pipes do though.
I checked the Server Network Utility and I see TCP/IP listed right under Named Pipes and I see that the default port is 1433.
Any ideas how to get SQL to listen on that port?
i am asked to change the default port 1433 to some other name by the audit team.
is it safe to change the port in cluster mode.
Does anyone know how to change the default port number of 1433 to somethinig else?
Thanks!
How many people have actually change their sql port from 1433 to something else
View 1 Replies View RelatedI have sql server that get the following error on error log.
SuperSocket Info: Bind failed on TCP port 1433.
This error forces client to use Named Pipe to connect to SQL Server.
Does anyone how to fix this error.
Thank You,
John
So, I have 2 laptops, both with standalone SQL Server 2012 Management Studio.
laptop 1 can connect to my remote server on xxx.xxx.xxx.xxx,1433
laptop 2 cannot connect through management studio - but can connect directly from the development website on this machine.
I get error 18456, cannot connect to server and login failed for 'user'
Firewall on or off has no effect.
Witam!Mam problem z polaczeniem sie z baza danych po TCP/IP przez port domyslny1433, nie mozna sie telnetowac ani nic z nim zrobic, poprostu niezyje. Portjest zamkniety i nijak nie moge go zmusic do jakiejkolwiek komunikacji nawetpo localhoscie. Skaner portów wykrywa go jako zamkniety. Czy wiecie moze jakten port otworzyc i zmusic go do komunikacji z baza danych? OS win2k3,MSSQL2000 Server.PozdrawiamHello!I have a problem with a TCP/IP connection to Data Base through the 1433port. I cannot telnet on this port even on localhost. My firewalls aredisabled but port scanner see the port as closed. Protocol TCP/IP on theMSSQL Server is enabled and it's not hidden, so I don't know what I shouldto do. My configurations: Win2k3 Server, MSSQL Server 2000Thx for answers.
View 1 Replies View RelatedHi,
Does SQL mobile require port 1433 to be open for RDA? I was under the impression that all synching occured through port 80. But when 1433 is restricted a connection cannot be completed.
I may be missing something really simple. My understanding of tcp/ip networking concepts are not very solid.
Thanks,
Tony.
Version: SQL SERVER 2012 enterprise edition and SP2.
Due to one of the security reason, I have changed default port 1433 to another port number in configuration manger tools->protocols for MSSQLSERVER->TCP/IP --> IP ALL section mention another port number.
After restarted service, SQL SSMS able to connect server itself and new port number also LISTENING.
But SQL client SSMS not connected to one of the PC side after changing default port.
SQL Server 2012 two node single instance cluster.
For DB access from application severs, do we need to open port (1433) for NODE IPs too ?
Or is it enough if we open the port 1433 only for VIRTUAL IP ?
Hi. I'm a SQL Server novice, so apologies if any of this sounds simple.I am running Windows XP SP2, and have just installed SQLServer 2000. Ineed another application to connect to SQLServer, and am specifying itto do so via localhost:1433, but keep getting an error whenever I trydoing so saying it cannot connect to the database. A colleague of minehas the exact same set up on his machine, and he can connect to SQLServer fine. Running 'netstat -a' at the command line on his machinereveals that the system is listening to port 1433/ms-sql-s. Runningnetstat on my machine shows that the system is not listening to1433/ms-sql-ms. I have checked in Network Config in SQLServerEnterprise Manager, and TCP/IP is set to be using 1433.To confirm this, my application can connect over the network to mycolleague's SQL Server. but he cannot connect over the network to mine.So I'm pretty sure the issue is related to this 1433/ms-sql-s problem.Does anyone know how to resolve this? Many thanks.
View 1 Replies View RelatedI'm working on a completely virgin install of SQL Server 2k in Windows 2003.
Just after install I check that the TCP/IP protocol is enabled under the
server properties and then I try to Telnet into port 1433. On this one
particular box I get back the following:
C:>telnet localhost 1433
Connecting to localhost...Could not open connection to the host, on port
1433: Connect failed.
For comparison I tested telnet on a couple other machines and I get back a
blank window ready for my commands, as I'd expect.
I've checked the firewall settings and other IP Filtering settings to see if
any of those were blocking traffic to 1433... nothing. I've triple checked
the SQL Server settings for any "problems" and nothing jumps out at me.
We have 2 clustered SQL instances (2 physical servers in each cluster). Instance2 needs to be setup as a linked server on Instance1.
At this time port 1433 between them is not open. I am referring to the port on the network switch, not in the Windows Firewall (ports in Windows Firewall are already open).
Is opening the port between virtual IP-s sufficient? Or does port need to be open between all physical source/destination IP-s as well?
Hi all!I just tried to enable TCP/IP on SQL Server 2000 (trial, SP3a). TheServer Network Utility shows it's already turned on, but afterrestarting the server doesn't listen to any TCP port, and in theeventlog it reports "SuperSocket info: gethostbyname(MSAFD Tcpip[TCP/IP]) : Error 11004." and "SuperSocket info: (SpnRegister) : Error2102.". I googled but found nothing helpful. Does anyone know what'swrong??The OS is Windows 2003 Server Enterprise Edition.
View 2 Replies View RelatedNeed url on good kb or article on converting sql 2000 to sql 2005 (full version not express)
Thanks,
Michael Oard
Hi,
I have SQL Server 2000 installed on my Windows XP (SP2) machine. I have the port set to 1433 (under Server Network Utility-->General-->TCP/IP). Here's the problem: when i run
netstat -anb
nothing is running on port 1433. What i DO have is this:
TCP 0.0.0.0:1036 0.0.0.0:0 LISTENING
[sqlservr.exe]
Before I rebooted my computer it was running on port 1032. Anyone have any idea why this is happening? Thanks.
Hi allI'm struggling to find an answer to this one!We've configured our SQL boxes to run under a different port number,e.g. from 1433 to 4533. This works fine under our Citrix enviornmnetwhere the dsn is configured to use the new port. The problem comes interms of SQL Server management. For example, when you try andconfigure SQL Replication, it is not possible to add the subscriberunless the SQL Servce runs under port 1433, the default port. Thesame goes when you try to add the server as a registered server withinthe Enterprise Manager MMC.Does anyone know how you can configure SQL Server to run under adifferent port number, without naffecting SQL REPLICATION, etc?Many thnaksNikJoin Bytes!
View 2 Replies View Relatedcant connect to sql server 2000 from c# 2003
View 1 Replies View RelatedI would like to know the best practice for running analysis service in terms of port usage. Is it better to run on a specific port or have dynamic ports ? We have clustered servers that run default on 2383 but not sure with non clustered what's the best way to get performance.
View 2 Replies View RelatedI use SQL Server 2000 as my database. I use WinXP and my computer does not connect to any network.
But I can't telnet localhost 1433.
When I open the file ERRORLOG, it displays:
"2005-01-06 22:36:22.43 server SQL server listening on Shared Memory, Named Pipes."
I checked the enable protocols, they are Named Pipes and TCP/IP and default port is 1433.
But I can't telnet to it. I can't understand why.
Anybody can help me? Thanks.
Hello, is it possible to run sql script files from c# and listen to messages?
foreach (string aScript in scripts)
{
if (File.Exists(aScript))
{
txtProgress.Text += Environment.NewLine + " Run script: " + aScript + " - Start time: " + DateTime.Now.ToString() + Environment.NewLine;
__streamReader = new StreamReader(aScript);
__myQuery = __streamReader.ReadToEnd();
__cmd.CommandType = CommandType.Text;
__cmd.CommandText = __myQuery;
__cmd.CommandTimeout = 5000000;
__rc = __cmd.ExecuteNonQuery();
txtProgreso.Text += Enviroment.NewLine; // MESSAGE HERE
__streamReader.Close();
}
}
I tried with
// Create a SqlNotificationRequest object.
SqlNotificationRequest notficationRequest = new SqlNotificationRequest();
// Associate the notification request with the command.
__cmd.Notification = notficationRequest;
But I get an error saying I need SQL 9 or later, aldo SQL 2005 Express says it´s version 9
Is there another way?
Thanks!
We have a customer who is trying to get sql server 2005 express edition installed on their pc to continue using our application but the sql server instance is not starting.
If we have him go into services and try and start the service for the named instance of sql server express it gives us a "The sql server [sqlexpress] service on local computer started then stopped" error message.
We looked into the event log and the error message we saw there was "server failed to listen on [ 'any' <ipv4> 0 ]"
Anyone have any idea? I can provide further details if necessary, but they are hard to obtain since I do not have access to the computer, and our customer is not very computer savvy.
One detail i can add is they have office small business accounting installed, and it has created an instance of sql server 2000. I was thinking there may be a conflict here but i was unable to reproduce anything on my machines with msde and sql server 2005 express.
The computer is windows xp home edition, and has service pack 2 installed.
Thanks
I am getting the following error when creating a endpoint (that will be used for allwayson) The Database Mirroring endpoint cannot listen for connections due to the following error: '10049(The requested address is not valid in its context.)'.
My physical network card is configured with:
10.9.255.170
and iam creating my endpoint with 10.9.255.82
The creation of endpoint is being done with;
CREATE ENDPOINT [Hadr_endpoint]
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = (10.9.255.82)
FOR DATA_MIRRORING (ROLE = ALL, ENCRYPTION = REQUIRED ALGORITHM AES)
GO
IF (SELECT state FROM sys.endpoints WHERE name = N'Hadr_endpoint') <> 0
BEGIN
ALTER ENDPOINT [Hadr_endpoint] STATE = STARTED
END
GO
use [master]
GO
GRANT CONNECT ON ENDPOINT::[Hadr_endpoint] TO [account]
GO