Is it possible to dervive the result in a single query? Or separate query needed like the followings :
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, MIN(WT) AS MinWT, MAX(WT) AS MaxWT, AVG(WT) AS AvgWT, COUNT(RecID) AS TotalQ
FROM TAB_Name
GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, COUNT(Qid) AS 'WT<=0'
FROM TAB_Name
WHERE WT <= 0
GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
SELECT CONVERT(CHAR(10), CreateTimeStamp, 111) AS Date, COUNT(Qid) AS 'WT<=10'
FROM TAB_Name
WHERE (WT > 0 AND WT <= 10)
GROUP BY CONVERT(CHAR(10), CreateTimeStamp, 111)
Often when I write a stored procedure, I encounter a situation where it will be really convenient if I can ignore an error and continue the execution of next SQL statement, especially when I know what kind of error it will generate. It's just like the effect of "On Error Resume Next" in VB.
Does anyone have any idea or have some knowledge to share? I would really appreciate.
I am using SQL Server 2005 and SQL Server 2000. Thanks.
Is it possible to achieve partition parallelism in SSIS? What I am asking is, In DataStage, if I load some data like 'data reader -> trans1 -> trans2 -> destination' (and assume that I have 4 nodes configured), the tool divides the data into 4 different datasets and executes the package as 4 instances. This way the data load is very fast. Is it possible in SSIS?
Of course we can divide the dataset and load them thru multiple instances? But then dividing the dataset will differ for every load and so we need to modify the package all the time. Even if we divide the dataset, I am not sure 4 instances will run in 4 different nodes or in a same node? So anybody has any idea about it?
I have a flat file source which going to write in a db table. There is lot of warning message, which based on different condition (CSPL) generate different message, which I achieved through lots of conditional split and derived columns dataflow object. My question is can I achieved same functionality by the script task?
I have a main report and some subreports. What i want to achieve is the subreports would be dynamically sent parameters to and the layout would change depending on some parameters sent from the main report. So there ia going to be a main report that is constant but the subreports data and layout could change.
Another question is can i have an expression that would hide a subreport if there is no data in the subreport?
I am looking into various options to improve latency of our application (we figured the latency is mainly because data persistence - writes and reads from DB). I am looking into In-Memory databases also. But, before making that decision (of using in memory databases), I would like to see if there is a way to configure SQL Server 2005 to get as close performance as in-memory databases?
My question: 1. Is there a way that I can configure SQL Server 2005 to use a CACHE that gets loaded as needed basis, so that future database reads/writes will happen to the cache as opposed to disk (db writes)? 2. Is SQL Server 2005 recoverable in such configurations? 3. Are there any ideas/resources where I can get more details? (Such as sample configurations with bench mark numbers, rpevious experiences..etc)
I am developing a package using SSIS which needs to do the following.
1. Read all flat file from a folder. I am doing this using For Loop task. I know the total number of files in that folder hence I am setting the loop counter = file count.
2. The next step is to import the data from flat file to SQL server destination table using data flow task.
3. Upon successful completion of data flow task there are some other tasks like SQL to do some checks/validation on the data, export it to another tables.
Upon successful completion of step 3 the iteration goes to next file.
I want to achieve the following
IF step 2 has error (for example corrupt file or incomplete data), I want to fail data transfer completely, skip step 3, and go to step 1 for next available file and do rest.
We have two locations in US, I am thinking of having 2 node SQL cluster for Lync 2010, I alardy have One DB server running in one location, now we got new site where we are planning to have one more DB for redundancy.
Hi, can I assign a NAS(Network Attached Storage) server to store the database file(readable and writable) and assign other several MS SQL database servers which will use the same database file in NAS to achieve the objective of high availability?
If it can, how can I set it up in MS SQL Server or it requires another 3rd patry software to set it up?
I have huge data and i am loading data from EXCEL to database table, after loading 80 percent data i am getting some error. My package got failed and it has lots of transformation and took around 6 hours to process completely because of that i don't want it to reload from start. if i run it again it should start from next record from where i got the error.
We have two db servers running in different datacenters connected through 2 100Mb/s data links. Each db is connected to 12 application servers. The total transaction per day by each application server is between 150K to 200K. Our requirement is to have all application server write to single db on each location. Then these databases are merged into one using replication. So at any given instant db on either datacenter will contain not only entries from its native application server but also from other datacenter. We tried using peer-to-peer replication but it caused severe blocking and few of our application servers crashed. We have to sync each table manually using after production in case we stop distribution agent during production. Is there any easy way to achieve above requirement within SQLServer 2005? Can we eliminate blocking in replication(don't tell me to use snapshot isolation or reducing commitbatchthreshold / commitbatchsize, we have already tried it; blocking is reduce but not eliminated)?
-- Get the new Customer Identifier, return as OUTPUT param SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned -- users. IF @FK_UserIDList IS NOT NULL EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record -- Retrieve Address reference into @AddressId -- EXEC spInsertForUserNote -- @FK_UserID, --@NoteID, -- @BeenRead -- @Fax, -- @PKId, -- @AddressId OUTPUT
COMMIT TRANSACTION
-------------------------------------------------- GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1 FROM testsupplierSCNCR I am getting the result of 01/01/2007
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows. SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches FROM dbo.MAKES INNER JOIN dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC "> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" /> <asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" /> <asp:Parameter Name="ATT_ID2" /> <asp:Parameter Name="VAL2" /> <asp:Parameter Name="ATT_ID3" /> <asp:Parameter Name="VAL3" /> <asp:Parameter Name="ATT_ID4" /> <asp:Parameter Name="VAL4" /> </SelectParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource> <br /> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2" DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID"> </asp:DropDownList> <asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID" DataSourceID="SqlDataSource1"> <Columns> <asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False" ReadOnly="True" SortExpression="DERIVATIVE_ID" /> <asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" /> </Columns> </asp:GridView> </asp:Content> AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback). Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage. Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in ** =================================== Sequence contains no elements ------------------------------ Program Location: at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke() at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120)) insert into #temptable SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10 --column name declare @cname varchar(30)
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!! -- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on go if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1 if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name FROM... WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
End Sub /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// I executed the code successfully and I got a box which asked for "Enter the query string". I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says. Command(s) completed successfully. What I really need it to do is to display the results of the query. Does anyone know how to do this? declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error. We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go into production in a few days.
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1 @Franchise ObjectId , @dtmStart DATETIME , @dtmEnd DATETIME AS BEGIN
SET NOCOUNT ON
SELECT p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec , count(1) "Count" , sum(Amount) "Total" FROM tb_Event t JOIN tb_Prod p ON ( t.ProdId = p.ProdId ) JOIN tb_ACDef a ON ( t.ACDefId = a.ACDefId ) JOIN tb_Curr c ON ( t.CurrId = c.CurrId ) JOIN tb_Event e ON ( t.EventId = e.EventId ) JOIN tb_Setl s ON ( s.BUId = t.BUId and s.SetlD = t.SetlD ) WHERE Fran = @Franchise AND t.CDate >= @dtmStart AND t.CDate <= @dtmEnd AND s.Status = 1 GROUP BY p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay