Possible To Restore Database From Raw MDF And LDF Files Of Old To New Database Instance
Aug 19, 2015
I have a client that has POS software called Restaurant Pro Express (RPE) from [URL] ...
Their old POS computer had a hardware failure, but I was able to attach the hard-drive to another computer and recover the data. RPE uses a MSSQL database system. However, my client doesn't seem to make backups very often
- the last one is dated January 5, 2015. I was able to copy the C:Program FilesMicrosoft SQL Server folder over which contained the instance as well as all the data files - and has up-to-date information. The instance in the recovered Microsoft SQL Server folder was called MSSQL.1. I installed the RPE software on their new computer, and it too now has an instance called MSSQL10_50.PCAMERICA. The new computer is using MSSQL 2008 R2, while I believe the old computer would have been using MSSQL 2005.
I am no DBA expert, especially when it comes to MSSQL. Is is possible to 'restore' the database from the 'raw' .mdf and .ldf files of the old computer to the new computer / database instance? If so, how should I proceed?
I have a client that has POS software called Restaurant Pro Express (RPE) from www.pcamerica.com Their old POS computer had a hardware failure, but I was able to attach the hard-drive to another computer and recover the data. RPE uses a MSSQL database system. However, my client doesn't seem to make backups very often - the last one is dated January 5, 2015.
I was able to copy the C:Program FilesMicrosoft SQL Server folder over which contained the instance as well as all the data files - and has up-to-date information. The instance in the recovered Microsoft SQL Server folder was called MSSQL.1. I installed the RPE software on their new computer, and it too now has an instance called MSSQL10_50.PCAMERICA. The new computer is using MSSQL 2008 R2, while I believe the old computer would have been using MSSQL 2005.
I am attempting to restore the database from within VB.NET application I am making the following 3 calls:
RESTORE FileListOnly FROM DISK = 'C:MyDatabase.dat'
USE Master RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat' WITH NORECOVERY, MOVE 'MyDatabase' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataMyDatabase.mdf', MOVE 'MyDatabase_log' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataLDFMyDatabase.ldf', REPLACE
RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat'
using SMO. This logic works fine with small *.dat files, however when using *.dat file of about 4Gb I get an error on the 3d restore database call:
ExecuteNonQuery failed for Database 'master'.
An exception occurred while executing a Transact-SQL statement or batch.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Operator aborted backup or restore. See the error messages returned to the console for more details.
ExecuteNonQuery failed for Database 'master'.
An exception occurred while executing a Transact-SQL statement or batch.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Operator aborted backup or restore. See the error messages returned to the console for more details.
The same program/logic also works fine when I use MS SQL 2005 and it runs fine from MS SQL 2005 Query Analyzer for both 2005 and 2000 databases. There seem to be only problem with MS SQL 2000 from within VB.NET. Anybody has any idea? I'd appreciate any response. Thanks
I had created 2 Sql server instance in 2 servers created using VMware. From the primary server I log shipped the required databases into the secondary. Both the servers were in the same domain whose active directory was also in another server in the same virtual lab environment. My question can we have the primary sql server in one domain and the secondary sql server to which the logs are shipped in another domain by including a router also between the 2 networks for connectivity?
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME> FROM DISK = 'D:DATAMYTEST.DAT_BAK' WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF', MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF', REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME> FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
I want to move one database from the source SQL Server 2000 instance to a new SQL 2000 instance in another machine. I have five user databases in this source SQL instance. How should be my approach to move this single database out of this ? My understanding is restoring this database in the new instance, copying all logins to the new instance and then copying the jobs, DTS packages, alerts, operators only specific to this database will do it. Please let me know if this is exactly what I should do ..
I want to move one database from the source SQL Server 2000 instance to a new SQL 2000 instance in another machine. I have five user databases in this source SQL instance. How should be my approach to move this single database out of this ? My understanding is restoring this database in the new instance, copying all logins to the new instance and then copying the jobs, DTS packages, alerts, operators only specific to this database will do it. Please let me know if this is exactly what I should do ..
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
I downloaded and ran AdventureWorks.msi into my SQL Server Management Studio Express (SSMSE) one year ago.But I did not know how to attach it to my SSMSE then. Last week, I deleted it from the "Add or Remove" of Control Panel and I downloaded the new AdventureWork.msi and installed it my SSMSE. Today, I tried to use the Database Explorer of VB 2005 Express for the first Stored Procedure programming. I clicked on AdventureWorks.mdf and I got the following error: One or more files do not match the primary of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupt and should be restored from a backup. Cannot open user default database. Login failed. Login failed for user 'CENADe1enxshc'. Log file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_Data_log.ldf' does not match the primary file. It may be from a different database of the log may have been rebuilt previously. Please help and advise me how to correct this problem.
Hi all (newbie @ asp.net)(oldie @ ASP 3)What is the purpose of using an attached MDF database files in the App_Data folder on a web site as to importing it into the SQL server directly or creating it on the SQL server. Does a mdf database attached file purely use the SQL server as a connection interface.Is it something similiar to DSN(ODBC) Connections for ms access databases.
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration: WINNT Server Enterprise 4.0 w/SP5 SQL Server 7 Enterprise & SP1
2 SQL Servers: Production Server Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem: How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server? The database being restored cannot be in use during a restore. If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement: Standby Server - RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
I am trying to modify the files path (primary file, log file) of databases, but it looks like I am not able to mofidy their files path directly from the database property dialogue? Would please any experts here give me some ideas on what else can I try to figure it out? Thanks a lot in advance and I am looking forward to hearing from you shortly.
Sometime during the night last night some user account permissions were "lost". Am I right to think that restoring the master database would be the way to go? We have a 2 node 2012 cluster and I stop the cluster resource and start the db in single user mode from the active node. Somehow the sharepoint farm is still trying to connect so I can't get logged in single user. What method could I use to stop users from connecting when I don't have access to the sharepoint farm.
i have a development database that has updates and changes to a production database. rather than go through individually and alter all relevant tables and stored procedures, id like to back up the database on the development side and restore it on the production side as the production database. is there a way to restore the database on the production server but preserve all the security settings (ie logins and such)? i noticed on our development server, that if i try to restore the database with my development database, it overwrites the users and/or if the user is the same on both, it removes the login name for that user.
I was wondering how I could restore a bkp file into a database with a different name. For example, I made a backup of T1.mdf and i want to restore t1.bkp to T2.mdf.
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
I had a major disk failure, and the only SQL Server files I was able to recover were master.dat, msdb.dat,msdblog.dat, two text files and two database devices. My question, is it possible in SQL 6.5 to restore a database from just the database device, and if so, how? Thank you.
I'm a newbie so please be gentle.In attempting to run a restore I get the following error message:"Exclusive access could not be obtained because the database is inuse." However, it doesn't appear that there are any connections to thedatabase. At the suggestion of another thread, I ran sp_who2 and thereare no connections to the database in question. I've been running thesame restore for months and all has been well, until yesterday....I wrote an .asp page (below) to test connectivity to this database.The vb code ran successfully and soon thereafter, my nightly restorefailed. Task manager does no show that the asp page is active.Lastly, I did add a user ("jbtest") as well as change the option to useeither Windows authentication or SQL Server authentication inEnterprise Manager.Any ideas would be greatly appreciated.Thanks.<%@ Language=VBScript %><%companyName = "agemni"Set cnn = Server.CreateObject("ADODB.Connection")cnn.ConnectionString = "DRIVER=SQLServer;SERVER=SHEELA-NA-GIG;UID=jbtest;PWD=test1;APP=MicrosoftDevelopment Environment;WSID=SHEELA-NA-GIG;DATABASE=" & companyName &";Trusted_Connection=No"cnn.ConnectionTimeout = 300cnn.CommandTimeout = 300cnn.OpenSet RS = Server.CreateObject("ADODB.Recordset")strSQL = "SELECT * FROM Preferences"RS.Open strSQL, cnnResponse.Write "connection established with the <b>" & RS("CompanyName") & "</b> database. They are a <b>" & RS("street") & "</b>customer. "RS.CloseSet RS = Nothing%>
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
In MS SQL you can create a database that is run in a seperate instance.Why and when should a database run on a seperate instance ?Benefits ?What is prefered and why?Two applications have it's own tables.Appplication A have a set of tables.Appplication B have a set of tables but also use tables from AShould it run on different databases (DbA and DbB) and instance?Or is it ok to let them use the same database (DbAB) ?
I'm database novice and would like to get confirmation or correction on my understanding of the difference between a user under a sql server instance vs a user in a sql server database. For example, a user can be added under Instance-->Security--Login and a user can be added under Instance-->Databases-->Database Name-->Security-->Users.
Is the difference that the login under the instance is used for logging into the database via management studio and the user under the database is for database access? Also, is one dependent on the other? So if I want to add a user to the database, they have to be added to the instance first?
Yesterday I was able to connect to the server, and now it's telling me I can't log in via the SQL Server manager.
the database has a red stop signal on it, and I'm not sure what caused this.
I did install Windows XP IIS (Internet Information Services) yesterday. Could this have caused this?
How do I get the database started again?
The error I'm getting during login attempt is this...
===================================
Cannot connect to <MYSERVER>.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Hello... Is there any way to create a new database directly as a user instance. I guess this means creating a new mdf/ldf pair which is detached from the server after its created. Thank you...
Hi, I was wondeing how it could be posible to export a table from a database instance to another one. I only need the structure of the table to be imported to the new database instance. I don't need the data from the source table. Is there any utility or scritp to do this? It will be great to import indexes and keys also. Thanks in advance.
