Power Pivot :: Displaying Cumulating Numbers In A Pivot Table When There Is No Value
Mar 11, 2015
I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
View 24 Replies
ADVERTISEMENT
Oct 13, 2015
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
  HASONEVALUE(dimSalesCompanies[SalesCompany])
  ;IF(
    VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
    ;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
    ;[Sales]
  )
  ;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
View 3 Replies
View Related
Nov 18, 2015
Slow loading issue with an if statement. In the raw data the field [Location] is a text field e.g. 0010. I have a parameterised query that get a Location_Value from Excel and passes it to the PQ query using:
#"Filtered Rows1" = Table.SelectRows(#"Removed Other Columns", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
This works fine if you chose a single location. Â However I wanted to be able to select all locations and text is horrible to work with so in PQ I used the change type function to change the location column into whole numbers. I changed excel to also pass a number as Location_Value. Â I was therefore surprised when the same query took 2.5 times longer to refresh????
My PQ now looks like this
 #"Changed Type" = Table.TransformColumnTypes(#"Removed Other Columns",{{"Location", Int64.Type}}),
  #"Filtered Rows1" = Table.SelectRows(#"Changed Type", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
I'm wondering if I need to do something to the ([Location] = Location_Value) bit as maybe it still thinks [Loation] is text and it is trying to compare it to a number. I st assumed the step above meant that [Location] was now a number, but maybe you still have wrap it with some kind of VALUES or TEXT function?
View 9 Replies
View Related
Oct 14, 2015
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]
View 13 Replies
View Related
Aug 17, 2015
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
View 3 Replies
View Related
Jul 8, 2015
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
View 2 Replies
View Related
Sep 18, 2015
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.Â
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
View 3 Replies
View Related
Nov 23, 2015
I have a data table that contains budget and actual data by month. Â I use the data to create a pivot that shows actual results next to budgeted results. Â I need a column that shows that variance between those columns. Â I think my issue is that the "Type" field contains actual and Budget. Â I sum on "Type". Â I can't seem to create a sum since those items are in the same field or am I missing something?
Table design
Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100
Output Design
DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt
View 4 Replies
View Related
Oct 9, 2015
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102
View 8 Replies
View Related
Apr 13, 2015
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. Â How do I resolve this.
Below are the steps I go thru to printÂ
1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout and select print area.
4. Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
Do I need any other step?Â
View 2 Replies
View Related
Apr 29, 2015
I have a pivot table that connects to our data warehouse via a PowerPivot connection. Â The data contains a bunch of comment fields that are each between 250 and 500 characters. Â I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Â Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. Â This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
View 2 Replies
View Related
Jul 8, 2015
I have two data tables:
1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost
The tables have a common key named obviously as Key. The data looks like this:
Key
Facility
Line
Time
Output
Alpha
I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.
View 5 Replies
View Related
Aug 2, 2015
I am trying to show images in a product listing in power view.I work with an excel 2013 desktop version based on an office 365 pro account.I did the following steps:
import of an excel file with an article list via power query and loading the data to the data model import jpg images from a folder via power query, setting content as binary type and loading the data to the data modellinking both tables in power pivot--> manage via the image namesetting the table behavior for the images table under power pivot --> manage --> Advanced (e.g. Default Image: Content)opening power view and building article cards with article number and imageProblem: only a camera icon shows up in power view
Is there a solution with a desktop version?Can I use my Office 365 Pro account to make it work? How?Why is there no solution showing images in a pivot table?Link to Dropbox with power pivot filesÂ
View 9 Replies
View Related
Jun 3, 2015
I have two tables in my data model,
1. Fact table with sales by customer, Territory ID etc
2. Table with targets per Territory ID
I want two combine them in one pivot table.Â
Pivot: Territory;Sales;Target
What I'm getting is the correct column with sales, but the overall sum of all territories in column for targets.Relationship is established between two tables via Territory ID
View 13 Replies
View Related
Dec 21, 2014
My PowerPivot workbook, is generating new tables on each refresh.
When opened up the workbook I find a dozen tables named, "Query1", "Query2", "Query3" etc.
It's pulling data from SQL Server.
View 4 Replies
View Related
May 21, 2015
I have a text file which I used as an initial load of data, containing a little over a million rows. I would like to produce a daily "update" file, which contains changes to existing rows, and creation of new rows. What is the best method of updating the existing table in power pivot?
View 2 Replies
View Related
May 12, 2015
Here is the data:
ProjectId
Stage
StateStatus
ProjectId
ProjectName
StartDate
P1
S1
Completed
P1
P1Name
31/12/2015
[Code] ...
I want with PowerPivot to tell what stage is in progress for project. I looked at RElatedTable, LOOKUPVALUES, but I can't find a way to associate this to get working. I got however the one telling me which projects are Completed.
Result shall be:
ProjectName StageinProgess
P1Name S2
P2Name S3
P3Name None
View 4 Replies
View Related
Nov 18, 2015
have just implement Microsoft Dynamics NAV. and I'm trying to learn how to use this Excellent tool powerpivot add on, But when I'm trying to connect it to any SQL table that support Dynamics NAV I have an error message while downloading the table :"do not have enough memory or I should use Excel 64 bits instead 32 bits".when I check CPU memory Utilization we are just using less tha 20%. I'm working on a remote server and the using Excel 2010.
View 3 Replies
View Related
Nov 20, 2015
I want to calculate the target based on Flag value if Flag value is "Y" ....than MAX(Customer Target) else MAX(SLA target).Flag column contains "Y" , "N" and some blank values . Flag, Customer Target and SLA target are the columns in Table1. I have used the below formulas
Target:=IF('Table1'[ Flag]= "Y",MAX('Table1'[Customer Target]),MAX('Table1'[SLA Target]))
Target:=IFERROR(IF('Table1'[Flag]= "Y",MAX('Table1'[Customer Target]),MAX('KPI'[SLA Target])),BLANK())
View 7 Replies
View Related
May 5, 2015
My DB contains company names repeating themselves several times (in the same column).
Can I create a new table that shows only the distinct names, and use it to work with the data?
My intention is to allow my users to choose only from the options within the DB (mimic in a way the list validation option in excel)
View 6 Replies
View Related
Nov 9, 2015
I'm using a Contoso database running on Power BI Desktop (Version: 2.28.4190.122). The databiase is actually a Contoso.pbix file provided for a book [URL]. I have a DAX query that summarizes a Products table by Product[Manufacturer] and gives a count of products by the manufacturers.My Problem is that the ORDER BY COUNTROWS doesn't work.
why the order by clause doesn't work when I'm confined to the Products table while the order by clause does work when I start with the Sales table? The numbers are correct in both queries.Â
This query doesn't sort
EVALUATE
SUMMARIZE (
Product,
Product[Manufacturer],
"ProductCount", COUNTROWS ( Product )
)
ORDER BY COUNTROWS ( Product ) DESC
This query does sort correctly
EVALUATE
SUMMARIZE (
Sales,
Product[Manufacturer],
"ProductCount", COUNTROWS ( RELATEDTABLE ( Product ) )
)
ORDER BY COUNTROWS ( RELATEDTABLE ( Product ) ) DESC
View 2 Replies
View Related
Jul 19, 2012
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
   declare @tTable(col1 int)
   insert into @tTable(col1) values (1)
   select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
View 11 Replies
View Related
Sep 17, 2015
I cannot create a measure that returns results for dates that do not exist in the fact table despite the fact that the components included in the measure contain valid results for these same dates.Creature a measure that counts the number of days where the "stock qty" is below the "avg monthly sales qty for the last 12 months" (rolling measure).Here is the DAX code I have tried for the measure (note that filter explicitly refers to the date table (called Calendar) and not the fact table):
StkOutCnt:=CALCULATE (
COUNTROWS ( VALUES ( Calendar[DateKey] ) ),
FILTER (
Calendar,
[Stock qty] < [Avg Monthly Sales Qty L12M@SKU]
)
)
Below you can see the sub measures (circled in red) are giving results for all days in the calendar.Highlighted in yellow are dates for which the StkOutCnt measure is not returning a result. Having investigated these blank dates, I am pretty confident that they are dates for which there are no transactions in the fact table (weekends, public holidays etc...).why I am getting an "inner join" with my fact table dates despite the fact that this is not requested anywhere in the dax code and that the two sub measures are behaving normally?
View 6 Replies
View Related
Jul 20, 2015
I'm trying extract a column from the table based on certain Conditions: This is for PowerPivot.
Here is the scenario:
I have a table "tb1" with (project_id, month_end_date, monthly_proj_cost ) and table "tb2" with (project_id, key_member_type, key_member, start_dt_active, end_dt_active).
I would like to extract Key_member where key_member_type="PM" and active as of tb1(month_end_date).
Is this possible using DAX ?
View 6 Replies
View Related
Jul 9, 2015
I know how to do this in Excel, but not sure about Power Pivot. Our fire department works on a 24 hour shift that starts at 0700 each morning. I want to look up what shift is working depending on the date and time of dispatch. In Excel, I would do a look up table, but instead of using false() as  the last parameter, I would choose true().
I am not sure if this would be best created as a calculated column in the table that holds the incident date and time values, or have a separate table and create a relationship to use the shift in the rows/columns of my pivot table.Â
View 6 Replies
View Related
Nov 3, 2015
I have several reports in a Power View Gallery. In Gallery view, most of the reports show the "Open New Excel Workbook", the "Create Power View Report", and the "Manage Data Refresh" buttons on the right side of the report list. Why would some reports not have these buttons available? In the attached image you can see one report with the buttons and one without the buttons.
View 5 Replies
View Related
Jul 20, 2015
I've imported a number of excel sheets into a Power Query Table. All seems to appear ok until I load the data. Of the 15k rows around 2k have a similar error where it cannot convert an integer to type string as below example
Expression.Error: We cannot convert the value 40 to type Text.
Details:
  Value=40
  Type=Type
The columns in question are all of integer type, I've looked through the M query and there is no conversion to string taking placeThe values where we don't get the error are also integers hence the intriguing question is why does the error occur on a subset and not the others. I suspect there is a limit to the number of errors also somewhere internally M query is converting the column to text for some reason.
View 2 Replies
View Related
Apr 10, 2015
I have data like below
Country    State           Rank
India        Kerala           1
India         Kerala            2
India        Kerala            3
India        Tamil Nadu    1
India        Tamil Nadu    2
India         Orissa            1
India        Orissa            2
US            Florida           1
US           Florida            2
US           NewYork        1
I have to generate rank like this in power pivot. How can I achieve it?
View 3 Replies
View Related
May 19, 2006
Hi all,
In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
A desired Pivot Table is like:
MW2 MW6S MW7 TripBlank
Acetone 1.00 1.00 1.00 1.00
Dichloroethene 1.00 1.00 1.00 1.00
Trichloroethene 20.00 1.00 1.00 1.00
Chloroform 1.00 1.00 1.00 0.76
Methylene Chloride 1.00 1.00 1.00 0.51
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:
USE MyDatabase
GO
USE TABLE dbo.LabData
GO
SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank
FROM
(SELECT SampleName, AnalyteName, Concentration
FROM dbo.LabData) p
PIVOT
(
SUM (Concentration)
FOR AnalyteName IN ([1], , [11], [16])
) AS pvt
ORDER BY SampleName
GO
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the above-mentioned code and I got the following error messages:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'TABLE'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'AnalyteName'.
I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Jun 11, 2015
When updating a Power Query Source in Power Pivot, I'm getting the following error message:
Basically saying that OLE DB or ODBC-error occured when:
- Connections have been imported from a different workbook or
- the workbook has been created in a newer Version of Excel
None of which is the case here. What can cause this?
System: Virtual machine (VMware) on Windows 2008 R2, Office 2010, 64bit, using temporary profile.
View 5 Replies
View Related
Sep 9, 2015
I have opened an account in [URL] and taken the 60 days trial for power bi pro. I've developed power pivot and generated power views in share point 2013. But, I'm new to Power BI desktop. I have created a report in power BI desktop and published to [URL]. Also, I have uploaded an excel file directly to [URL] and created the report from the workspace available there itself and pinned the report to dashboard also. Everything is fine till this. But, I need to refresh the file which I have uploaded. I have some dummy data in excel sheet.
ZipCode State ZipName
2345 AA AA
456 BB BB
6787 CC CC
 This has been created as a table and then added to data model. So, power pivot has been created for the same. Then I have uploaded this file to [URL] site. But, I'm getting an error message while trying to schedule refresh for the same.
"You cannot schedule refresh for this dataset because it does not contain data model connections. You cannot schedule refresh on worksheet connections or linked tables. To schedule refresh the data must be loaded into the data model."
How can I create a data model connection? How can I schedule refresh for an excel file like this?
View 3 Replies
View Related
Jul 25, 2015
I'm a relative newcomer to Power View. I've been playing with charts and have been struggling to combine both line and bar on the same chart. It would appear this functionality is not available. Considering this is basic functionality when it comes to charting, how to achieve this....
View 3 Replies
View Related
Jul 16, 2015
I'm looking to replace text in a given column given a set of conditions in the other columns. Please see below the M query in the advance editor and in particular the bold text. Here I've created a new entry that would appear in the query applied steps window in the power query editor that I have called "Replace Values". The logic is if Data.Column4 column equals "London" then replace null values in Data.Column5 with London. However when I save the query below I get the errorÂ
Expression.Error: There is an unknown identifier. Did you use the [field] shorthand for a _[field] outside of an 'each' expression?
I plan to change the expression to test for multiple conditions however I need to get the basic expression working first. The other frustration i had with the "if" statement is it had to have an else even though I didn't require it, am i doing something wrong here?
let
FullFilePath = "C:PermanentDwellings.xlsx",
Source = Excel.Workbook(File.Contents(FullFilePath)),
  #"Expanded Data" = Table.ExpandTableColumn(Source, "Data", {"Column1", "Column10", "Column11", "Column12", "Column13", "Column14", "Column15", "Column16",
[Code] ....
View 8 Replies
View Related
