Power Pivot :: How To Create Subtotal Column
Nov 20, 2015
Q1-2013 Q2-2013 Q3-2013 Q4-2013 2013 Total
Distinct Count Member Distinct Count Member Distinct Count Member Distinct Count Member Member Months
AMBULANCE - LAND 264 301 355 352 1272
AMBULATORY SURGICAL CENTER 16 38 30 34 118
COMMUNITY MENTAL HEALTH CENTER 6 7 11 13
I have the above data, and want to create a column adding up the Distinct count member of each quarter. The number of distinct count member of each quarter is from a measure. The result I want to create is the column of 2013 Total Member Months as shown above. How to create a dax formula.
View 5 Replies
ADVERTISEMENT
Jun 25, 2015
I'm working on a measure which I'd like to use in PowerView, my data model contains 2 things:
1) Employees' scores
2) Stores in which employees work in
I would like to be able to put the employee's score in comparison to the store average (which is the average of all the employee's scores in the store), and then provide every employee with an individual report on their scores against their store's score (by tiling the view in PowerView by Employee). To do this, my (first attempt) at a measure for the store average looks like the following:
Overall_Avg:=CALCULATE([Score], ALL(Employee[Name]))
Which gives me the score of the employee vs. all other employees across all stores. What I'd like to then achieve is to add an additional filter that filters only the scores for the store that the employee belongs to - which is where I'm stuck.
Here are some of my attempts at them
Store_Avg:=CALCULATE([Score], ALL(Employee[Name]), FILTER(Employee[Store] = Store[Store Name]))
returns an error for me. However, trying:
Store1_Avg:= CALCULATE([Score], ALL(Employee[Name]), FILTER(Employee[Store] = "Store 1"))
works perfectly, but doesn't give me the desired output, which is 1 measure that changes the store depending on which employee (and thus store) is being selected.
View 5 Replies
View Related
Nov 16, 2015
I have a table ComponentPeriod. In it we have the combination of a component (e.g. A,B,C ) and a period (2014 Q1, 2014 Q2, 2014 January etc)I want the periods to be in descending order (2015 Q4, 2015 Dec, 2015 Nov, 2015 Oct, 2015 Q3 ... etc) and so I need to create a sequential number series to allow this to happen (as we can only order in the client tools by a single column - and so I guess the technique I'm looking for is used a lot to produce these types of "order by" columns)
I have done this in the past using
Period_Sequence =
calculate
(countrows(Period)
,filter
(Period
, Period[Start_Date] <= earlier(Period[Start_Date])
&& Period[Duration_String] = earlier(Period[Duration_String])
)
)
Which was fine when I was referring to a table where Periods where distinct directly but now I have denormalised this for ComponentPeriod so I need something a little more sophisticated Whats the best way to get a sequence with perhaps some partitions in across a subset of distinct columns (I guess from SUMMARIZE or similar)
E.g. I want
Period_Name, Type, Sequence
2015 Q4, Quarter, 1
2015 Dec, Month, 2
2015 Nov, Month, 3
2015 Oct, Month, 4
2015 Q3, Quarter, 5
2015 Sep, Month, 6
etc
even though there may be multiple records in ComponentPeriod that have the period 2015 Q4, but I want them all to have the value Sequence value of 1? I've got as far as:
Period_Sequence Desc =
calculate
(countrows(summarize(ComponentPeriod, ComponentPeriod[Period_End_Date]))
,filter
( ComponentPeriod
, ComponentPeriod[Period_End_Date] >= earlier(ComponentPeriod[Period_End_Date])
)
)
But this doesn't distinguish between the different types. I need an equivalent of the t-sql -
row_number() over (order by Period_End_Date desc, case when 'P3M' then 1 when 'P1M' then 2 end asc
View 7 Replies
View Related
Aug 4, 2015
PowerPivot 2013. In this example I am trying to get revenue per employee (highlighted in yellow)
In order to do that I need the numerator to appear in every row (red arrow in subtest)
I thought this would do the trick, but ...
=CALCULATE(sum('JOB COST DETAILS'[Job Line Income Amount]),ALLEXCEPT(Employee,Employee[Employee Name]))
View 7 Replies
View Related
Nov 3, 2015
I have several reports in a Power View Gallery. In Gallery view, most of the reports show the "Open New Excel Workbook", the "Create Power View Report", and the "Manage Data Refresh" buttons on the right side of the report list. Why would some reports not have these buttons available? In the attached image you can see one report with the buttons and one without the buttons.
View 5 Replies
View Related
Nov 3, 2015
I am bring two fact tables and a Date Dim into my Power Pivot model. I try to create relationship where but Power Pivot just reverses them. When I create the relationship I get an info icon warning me it will be changed.Why can't I create a one to many relationship with fact table on many side and dimension on one side?Power Pivot will not let me mark my dimCalnder as a date table either. My date dim has surrogate key, year, month and monthlongname columns only...
View 3 Replies
View Related
Aug 2, 2015
I am trying to show images in a product listing in power view.I work with an excel 2013 desktop version based on an office 365 pro account.I did the following steps:
import of an excel file with an article list via power query and loading the data to the data model import jpg images from a folder via power query, setting content as binary type and loading the data to the data modellinking both tables in power pivot--> manage via the image namesetting the table behavior for the images table under power pivot --> manage --> Advanced (e.g. Default Image: Content)opening power view and building article cards with article number and imageProblem: only a camera icon shows up in power view
Is there a solution with a desktop version?Can I use my Office 365 Pro account to make it work? How?Why is there no solution showing images in a pivot table?Link to Dropbox with power pivot files
View 9 Replies
View Related
Jun 18, 2015
i export PowerPivot from Tabular "Analyse in excel" and i have a connection to the temporary tabular DB of my own user. when i close the Tabular Solution my DB disapire and it is not possible to work. i sopose that i have to create to the steady DB.
View 8 Replies
View Related
Oct 19, 2015
I am trying to write a RANKX Function as a calculated field instead of a measure, so I can used rank as a report filter but it is not working.I have customers that I can rank by sum of sales amount and then bucket their ranks within categories such as Top 10, 50, 100. The goal is then to use this Top Customers list as a filter on the Power BI report.So far I have the following as a calculated column.
=RANKX(CustomerTable,SUMX('CustomerTable',[Sales]))
View 2 Replies
View Related
Nov 13, 2015
I am trying to create a burndown chart in powerpivot. Here's what I got...
Workload:=CALCULATE(COUNT([Err_Msg_ID]),ALL(dates[Date]))CumulativeCompleted:=CALCULATE(COUNT([Eng]),
FILTER(ALL(dates),dates[Date] <= MAX(dates[Date])))Burndown:=[Workload]-[CumulativeCompleted]
It all works except that once we get to the current date, the CumulativeCompleted plateaus (as you'd expect), but the dates (x-axis) keep rolling. Now, I want the dates to roll on so I can project out a linear trendline but I want the graphing of the burndown to stop at today's date.
View 2 Replies
View Related
May 5, 2015
My DB contains company names repeating themselves several times (in the same column).
Can I create a new table that shows only the distinct names, and use it to work with the data?
My intention is to allow my users to choose only from the options within the DB (mimic in a way the list validation option in excel)
View 6 Replies
View Related
Jul 21, 2015
I need to create a date dimension where the lowest level is month. I've seen examples which use the list function such as
Source = List.Dates(#date(2000, 1, 1), Duration.Days(DateTime.Date(DateTime.FixedLocalNow())-#date(2000,1,1)), #duration(1,0,0,0)),
The above increments by 1 day which is defined in the 1st argument of the #duration. My question is how can I dynamically change the value of this 1st argument such that its the number of days in the current month hence it will increment to only return the 1st date in the Month e.g
1/1/2000
1/2/2000
1/3/2000
etc..
I prefer to use an elegant approach if possible, the alternative would be return all dates, create a custom column from these dates which returns the month date - delete the dates column - get a distinct list of the month dates.
View 2 Replies
View Related
Aug 24, 2015
Using PowerPivot I created a connection to a view on a SQL Server database. All fields imported correctly.A column has since been added to the view. How do I get this to appear in my PowerPivot?
View 3 Replies
View Related
Sep 4, 2015
I have two tables shown below and I wish to add a calculated column to Table 1.
Table1 Table2
ID Activity Activity 1 Activity 2 Activity 3 etc etc etc Total
1 Activity 1 values values values Total value
2 Activity 2 values values values Total value
3 Activity 3 values values values Total value
etc
I want each row in the new column to show the corresponding activity divided by the sum of the total. So in the row with Activity 3 I want the formula SUM(Table2[Activity 3])/SUM(Table2[Total]). Also the number of activities will vary.
I am actually wanting to calculate a more complicated formula which calculates the correlation .
View 2 Replies
View Related
Oct 1, 2015
I have a problem copying data from column A to column B in Power Pivot.
View 3 Replies
View Related
Oct 30, 2015
I have written a simple DAX calculated column formula using SEARCH and got an error: It tells the text "PWP" cannot be found but as you can see the screen shows this text exsist within "Promotional Claim"The same happens when I try FIND function.
View 2 Replies
View Related
Oct 13, 2015
My simplistic data model looks like this:
Table.1
Spread Product Sales Channel ..
2 x CB ..
2 y CB …
4 x GFR ..
4 y GFR ..
I need a column with Spread Mapping, which should look like this:
->There are more columns in data model.
-> Spread for GFR is wrong so it must be mapped to be able to compare with CB
I guess there should be calculated column formula to calculate Spread Mapping. How to do it?
View 6 Replies
View Related
Dec 1, 2015
This is an SPC chart controlled by a slicer that operates a powerpivot table. This is then copied (by cell formula) into a "normal" table where the average, UCL, LCL and Erlang are calculated which are just basic calculations involving average and standard deviation. To make it work the values in the Average, UCL,LCL and Erlang must be repeated all the way down the table to create the chart. In the current format it works well and using a standard table keeps the chart range dynamic.
However this is a very clunky solution involving repeating the data tables in excel. I need to create dozens of charts and it will get large and slow.I would like to create the whole thing in a powerpivot table using measures so i can use powerpivot charts and ultimately powerBI. The data column PasID is a text column so I need a measure that calculates the "count of PasID" for each day(the row labels) and then repeats that value down a whole column in the same way the standard table does. I couldn't figure out how to get the correct number repeat down the whole column, which measures to use,Whether to create calculated columns in the data model or any of it. SO I need to be able to get a count of a text column then display the average of that count in a second column all the way down.
View 9 Replies
View Related
Nov 3, 2015
I've been trying to use a simple calculate forumla when adding a column
CALCULATE(SUM([Credit]),
FILTER(ALL([Date],[Date]<=MAX([Date])))
or just a CALCULATE(SUM([Credit])
And I have always the same error
Calculate is not recognized. I've try it on PowerBI and Excel ...
View 2 Replies
View Related
Nov 5, 2015
I am try to count number of items that will result by filtering a date column (one Date column). Ex Column "Created Date" between 1-Sep-2015 To 30-Nov-2015.
I am unable to get any function that is getting right value. The below function return 40, however the actual value when i do manual filter and count is 132.
CountofQ1:=COUNTAX(DATESBETWEEN(DumpLoad1[Start Date],[StrtDate],[EndDate]),DumpLoad1[Start Date])
View 4 Replies
View Related
Nov 15, 2011
I have 2 excel tables files.One table has info about sales by country, by model, by date...and the other table has units by date.Obviously, the common key is "date"....and by creating a relationship, I can add "units" to my combined resulting table.However, I can't create the relationship. Excel keeps telling me: "the relationship cannot be created because each column contains duplicate values. Select at least one column that contains only unique values".
View 15 Replies
View Related
Aug 16, 2015
experimenting with powerpivot and I use an simple example of the AdventureworksDW in Powerpivot.
If i use the RELATEd function with Product and ProductSubCategory the column is empty and I expect values.
Relationships are rightfully defined. What am i doing wrong?
View 3 Replies
View Related
Jun 23, 2015
In a calculated column I am trying to get a scalar text value from a lookup to another table. This works quite well when getting numerical values with the following formula:
=MinX(Filter(LookUpTable;LookupTable[from]<=MySourceTable[Day] && LookupTable[to]>=MySourceTable[Day]);LookUpTable[numericalColumn])
But as soon as I substitute the numerical column by a string column, #error results.
I also want to mention that the above query yields only one row as a result. It should be simple to return the value of one of the columns but after searching for quite some time, I could not find any function for that.
View 5 Replies
View Related
Jul 20, 2015
I'm trying extract a column from the table based on certain Conditions: This is for PowerPivot.
Here is the scenario:
I have a table "tb1" with (project_id, month_end_date, monthly_proj_cost ) and table "tb2" with (project_id, key_member_type, key_member, start_dt_active, end_dt_active).
I would like to extract Key_member where key_member_type="PM" and active as of tb1(month_end_date).
Is this possible using DAX ?
View 6 Replies
View Related
Jul 27, 2015
We are trying to do some utilization calculations that need to factor in a given number of holiday hours per month.
I have a date dimension table (dimdate). Has a row for every day of every year (2006-2015)
I have a work entry fact table (timedetail). Has a row for every work entry. Each row has a worked date, and this column has a relationship to dimdate.
Our holidays fluctuate, and we offer floating holidays that our staff get to pick. So we cannot hard code which individual dates in dimdate as holidays. So what we have done is added a column to our dimdate table called HolidayHoursPerMonth.
This column will list the number of holiday hours available in the given month that the individual date happens to fall within, thus there are a lot of duplicates. Below is a brief example of dimdate. In the example below, there are 0 holiday hours for the month of June, and their are 8 holiday hours for the month of July.
DateKey MonthNumber HolidayHoursPerMonth
6/29/2015 6 0
6/30/2015 6 0
7/1/2015 7 8
7/2/2015 7 8
I have a pivot table create based of the fact table. I then have various date slicers from the dimension table (i.e. year, month). If I simply drag this column into the pivot table and summarize by MAX it works when you are sliced on a single month, but breaks if anything but a single month is sliced on.
I am trying to create a measure that calculates the amount of holiday hours based on the what's sliced, but only using a single value for each month. For example July should just be 8, not 8 x #of days in the month.
Listed below is how many hours per month. So if you were to slice on an entire year, the measure should equal 64. If you sliced on Jan, Feb and March, the measure should equal 12. If you were to slice nothing, thus including all 15 years in our dimdate table, the measure should equal 640 (10 years x 64 hours per year).
MonthNumberOfYear HolidayHoursPerMonth
1 8
2 4
3 0
4 0
5 8
6 0
7 8
8 0
9 8
10 4
11 16
12 8
View 3 Replies
View Related
Jul 13, 2015
I am looking to add a column to one of my tables that displays a running rank of how many times a customer has ordered in a given period.
I currently have such a column however this column ranks against ALL of the orders that a customer has placed and ignores filters, whereas I need one that ranks based on the filters that are active at any given time.
The current formula is:
CustOrderCountPersistant=RANKX(FILTER('Q1 Data Set',[k1_customer_id]=EARLIER([k1_customer_id])),[order_id],[order_id],1,DENSE)
For example, if I am looking at a full years worth of data and a customer has placed 10 orders in that period this formula will add a 1 in the column for first order, a 2 for the second and so forth all the way to 10, the last order.
However it will give me exactly the same results if I filter the data to just one month of that year where they may have order only 2 orders.
In this scenario I want to have another column with a table that is filter sensitive and would show 1 for the first order and 2 for the second order.
Now, I do understand that the issue here is probably the FILTER() I have on as, if I understand correctly, that means all other filters are ignored. My attempts at reworking the formula to remove this have been unsuccessful (such as using a CALCUALTE and trying to use filter properties within that forumula).
To explain the context - I want to create a measure that counts how many customers have placed x amount orders in y number of days e.g. how many customers have placed 2 orders in 30 days.
View 3 Replies
View Related
Oct 15, 2015
Is it possible to include a currency symbol in an amount-field in PowerPivot/Pivottable based on a Currency column in a table? Something as the same as with SSAS MD. And I don't want fixed values in my code.
View 3 Replies
View Related
Jul 20, 2015
I've imported a number of excel sheets into a Power Query Table. All seems to appear ok until I load the data. Of the 15k rows around 2k have a similar error where it cannot convert an integer to type string as below example
Expression.Error: We cannot convert the value 40 to type Text.
Details:
Value=40
Type=Type
The columns in question are all of integer type, I've looked through the M query and there is no conversion to string taking placeThe values where we don't get the error are also integers hence the intriguing question is why does the error occur on a subset and not the others. I suspect there is a limit to the number of errors also somewhere internally M query is converting the column to text for some reason.
View 2 Replies
View Related
Nov 18, 2015
Slow loading issue with an if statement. In the raw data the field [Location] is a text field e.g. 0010. I have a parameterised query that get a Location_Value from Excel and passes it to the PQ query using:
#"Filtered Rows1" = Table.SelectRows(#"Removed Other Columns", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
This works fine if you chose a single location. However I wanted to be able to select all locations and text is horrible to work with so in PQ I used the change type function to change the location column into whole numbers. I changed excel to also pass a number as Location_Value. I was therefore surprised when the same query took 2.5 times longer to refresh????
My PQ now looks like this
#"Changed Type" = Table.TransformColumnTypes(#"Removed Other Columns",{{"Location", Int64.Type}}),
#"Filtered Rows1" = Table.SelectRows(#"Changed Type", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
I'm wondering if I need to do something to the ([Location] = Location_Value) bit as maybe it still thinks [Loation] is text and it is trying to compare it to a number. I st assumed the step above meant that [Location] was now a number, but maybe you still have wrap it with some kind of VALUES or TEXT function?
View 9 Replies
View Related
Apr 10, 2015
I have data like below
Country State Rank
India Kerala 1
India Kerala 2
India Kerala 3
India Tamil Nadu 1
India Tamil Nadu 2
India Orissa 1
India Orissa 2
US Florida 1
US Florida 2
US NewYork 1
I have to generate rank like this in power pivot. How can I achieve it?
View 3 Replies
View Related
Jun 11, 2015
When updating a Power Query Source in Power Pivot, I'm getting the following error message:
Basically saying that OLE DB or ODBC-error occured when:
- Connections have been imported from a different workbook or
- the workbook has been created in a newer Version of Excel
None of which is the case here. What can cause this?
System: Virtual machine (VMware) on Windows 2008 R2, Office 2010, 64bit, using temporary profile.
View 5 Replies
View Related
Sep 9, 2015
I have opened an account in [URL] and taken the 60 days trial for power bi pro. I've developed power pivot and generated power views in share point 2013. But, I'm new to Power BI desktop. I have created a report in power BI desktop and published to [URL]. Also, I have uploaded an excel file directly to [URL] and created the report from the workspace available there itself and pinned the report to dashboard also. Everything is fine till this. But, I need to refresh the file which I have uploaded. I have some dummy data in excel sheet.
ZipCode State ZipName
2345 AA AA
456 BB BB
6787 CC CC
This has been created as a table and then added to data model. So, power pivot has been created for the same. Then I have uploaded this file to [URL] site. But, I'm getting an error message while trying to schedule refresh for the same.
"You cannot schedule refresh for this dataset because it does not contain data model connections. You cannot schedule refresh on worksheet connections or linked tables. To schedule refresh the data must be loaded into the data model."
How can I create a data model connection? How can I schedule refresh for an excel file like this?
View 3 Replies
View Related
Jul 25, 2015
I'm a relative newcomer to Power View. I've been playing with charts and have been struggling to combine both line and bar on the same chart. It would appear this functionality is not available. Considering this is basic functionality when it comes to charting, how to achieve this....
View 3 Replies
View Related
