Power Pivot :: Slicers And Timeline Not Working Together
Sep 28, 2015
I have a boolean calculated column on my date table called 'Is Weekend?' that, unfortunately, doesn't work at all when sliced in combination with a Timeline slicer that's applied to the same date table.
For example: selecting an item from my 'Is Weekend?' slicer will reset any filters on the Timeline slicer. Similarly, selecting an item from my Timeline slicer will reset any filters on my 'Is Weekend?' slicer.
This appears to be the case for all filters applied to the date table, i.e. the Timeline slicer will reset them and they will reset the Timeline slicer.
View 3 Replies
ADVERTISEMENT
Apr 13, 2015
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. How do I resolve this.
Below are the steps I go thru to print
1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout and select print area.
4. Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
Do I need any other step?
View 2 Replies
View Related
Apr 18, 2015
One big reason why we have turned to Power BI for Office 365 is to share Power Pivot models with our senior executives who all use Macs.
While they have been able to successfully view the Power Pivot models and interact with the Slicers in Power BI, they have not been able to print the reports. We thought it was a Mac issue but it's happening on PCs too. There doesn’t seem to be a way to resize the report so that all columns print. So we then tried to click on the tiny button located in the bottom right corner that says “View Full-Size Workbook.” The file then opens up in Excel Online. Then when we click on the printer icon, we see the report but the slicer becomes invisible. When printing, all columns do show up however the slicer is invisible.
How to successfully print Power Pivot reports with slicers in Power BI?
View 2 Replies
View Related
May 13, 2015
I have a formula that should use data from 2 slicers:
Spend per period (changing currencies & dates):=[Spend per period]*CALCULATE([Sum of Value],FILTER(Currency,Currency[Date]=[End Date]),FILTER(Currency,Currency[Attribute]=CurrencySlicer[Attribute]))
I managed to link the [End Date] from the slicer to the formula, however the [Attribute] field is not numeric so I can't duplicate the same methodology.
{FYI: End Date:=LASTDATE('Finish Date Slicer'[Column1]) }
I assume that I need to build a formula to extract the data chosen in the slicer, and can't connect it directly to the slicer.
View 2 Replies
View Related
Nov 13, 2015
So, after my last post where the issue came down to my model, I have redone my data sources as a v.2 model and split out into traditional dim/fact tables. I have 2 fact tables a few dims that are shared between the two facts and some dims that are only on one fact.
In my old model I was doing most of this de-normalisation in my sql queries to produce the fact tables (and the two fact tables were related together).
In v1 I used to get a much better context-aware set of slicers as they were directly connected to the fact that the visualisations on the page were relating to. As I selected a slicer, any other slicers items that were no longer possible would disappear.
This is no longer happening with this star-schema method. The old way was better from a user perspective. I had to remove some "both" cross filter directions from the relationship model due on the dims that were shared between both facts, so they are only now Single. I wonder if that has any bearing on this but even if it does, I don't see a solution from this angle.
I guess the only idea I have would be to create calculated measures/columns (probably columns) to materialise the interesting dim values into the fact table but this seems a bit of a time consuming process and as I don't necessarily know in advance which slicers the users may want to use, so it feels like I almost need to add all possible dimension attributes in each fact table... ?
Here is my relationship diagram. In my testing the slicer updates work ok if they are on a 2 way relationship but not on a Single way relationship.
In my case my 2 fact tables are really related (SchemeParticipantResult is a parent of ParticipantMeasureResult) but this then breaks the traditional Star schema that I was advised to follow before.
View 6 Replies
View Related
Jul 31, 2015
For some of my calculations it is mandatory to get the first and the last date, filtered by the slicer type "timeline".
This works well as long as the date is not used on rows or columns ...
As soon as I'm using theDate within the rows this very simplistic dax measure doesn't work ...
I'm wondering how to determine the StartDate (from the timeline) and the EndDate (from the timeline) when "thedate" is actively contributing to the filtercontext.
In my opinion it is not another example of the "event in progress" situation, due to the fact that start and end dates are actively selected by the user and can not be derived from within the date model.
[URL]
View 2 Replies
View Related
Aug 2, 2015
I am trying to show images in a product listing in power view.I work with an excel 2013 desktop version based on an office 365 pro account.I did the following steps:
import of an excel file with an article list via power query and loading the data to the data model import jpg images from a folder via power query, setting content as binary type and loading the data to the data modellinking both tables in power pivot--> manage via the image namesetting the table behavior for the images table under power pivot --> manage --> Advanced (e.g. Default Image: Content)opening power view and building article cards with article number and imageProblem: only a camera icon shows up in power view
Is there a solution with a desktop version?Can I use my Office 365 Pro account to make it work? How?Why is there no solution showing images in a pivot table?Link to Dropbox with power pivot files
View 9 Replies
View Related
Jul 11, 2014
I have created one Multidimensional CUBE, while browsing(Analyze in Excel) it in Excel, I am unable to create TimeLine Slicer.It is giving me following error as: "We can't create Timeline for this report because it doesn't have field formatted as Date".
I have Dim_Date having Date as a column of Day level granularity. In PowerPivot, we do mark Dim_Date Table as a 'Date Table'.In the same way, do we have to set anything here so that Excel will come to the Date format for TimeLine Slicer?
View 7 Replies
View Related
Nov 3, 2015
I have several reports in a Power View Gallery. In Gallery view, most of the reports show the "Open New Excel Workbook", the "Create Power View Report", and the "Manage Data Refresh" buttons on the right side of the report list. Why would some reports not have these buttons available? In the attached image you can see one report with the buttons and one without the buttons.
View 5 Replies
View Related
Jul 20, 2015
I've imported a number of excel sheets into a Power Query Table. All seems to appear ok until I load the data. Of the 15k rows around 2k have a similar error where it cannot convert an integer to type string as below example
Expression.Error: We cannot convert the value 40 to type Text.
Details:
Value=40
Type=Type
The columns in question are all of integer type, I've looked through the M query and there is no conversion to string taking placeThe values where we don't get the error are also integers hence the intriguing question is why does the error occur on a subset and not the others. I suspect there is a limit to the number of errors also somewhere internally M query is converting the column to text for some reason.
View 2 Replies
View Related
Nov 18, 2015
Slow loading issue with an if statement. In the raw data the field [Location] is a text field e.g. 0010. I have a parameterised query that get a Location_Value from Excel and passes it to the PQ query using:
#"Filtered Rows1" = Table.SelectRows(#"Removed Other Columns", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
This works fine if you chose a single location. However I wanted to be able to select all locations and text is horrible to work with so in PQ I used the change type function to change the location column into whole numbers. I changed excel to also pass a number as Location_Value. I was therefore surprised when the same query took 2.5 times longer to refresh????
My PQ now looks like this
#"Changed Type" = Table.TransformColumnTypes(#"Removed Other Columns",{{"Location", Int64.Type}}),
#"Filtered Rows1" = Table.SelectRows(#"Changed Type", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
I'm wondering if I need to do something to the ([Location] = Location_Value) bit as maybe it still thinks [Loation] is text and it is trying to compare it to a number. I st assumed the step above meant that [Location] was now a number, but maybe you still have wrap it with some kind of VALUES or TEXT function?
View 9 Replies
View Related
Apr 10, 2015
I have data like below
Country State Rank
India Kerala 1
India Kerala 2
India Kerala 3
India Tamil Nadu 1
India Tamil Nadu 2
India Orissa 1
India Orissa 2
US Florida 1
US Florida 2
US NewYork 1
I have to generate rank like this in power pivot. How can I achieve it?
View 3 Replies
View Related
Jun 11, 2015
When updating a Power Query Source in Power Pivot, I'm getting the following error message:
Basically saying that OLE DB or ODBC-error occured when:
- Connections have been imported from a different workbook or
- the workbook has been created in a newer Version of Excel
None of which is the case here. What can cause this?
System: Virtual machine (VMware) on Windows 2008 R2, Office 2010, 64bit, using temporary profile.
View 5 Replies
View Related
Sep 9, 2015
I have opened an account in [URL] and taken the 60 days trial for power bi pro. I've developed power pivot and generated power views in share point 2013. But, I'm new to Power BI desktop. I have created a report in power BI desktop and published to [URL]. Also, I have uploaded an excel file directly to [URL] and created the report from the workspace available there itself and pinned the report to dashboard also. Everything is fine till this. But, I need to refresh the file which I have uploaded. I have some dummy data in excel sheet.
ZipCode State ZipName
2345 AA AA
456 BB BB
6787 CC CC
This has been created as a table and then added to data model. So, power pivot has been created for the same. Then I have uploaded this file to [URL] site. But, I'm getting an error message while trying to schedule refresh for the same.
"You cannot schedule refresh for this dataset because it does not contain data model connections. You cannot schedule refresh on worksheet connections or linked tables. To schedule refresh the data must be loaded into the data model."
How can I create a data model connection? How can I schedule refresh for an excel file like this?
View 3 Replies
View Related
Jul 25, 2015
I'm a relative newcomer to Power View. I've been playing with charts and have been struggling to combine both line and bar on the same chart. It would appear this functionality is not available. Considering this is basic functionality when it comes to charting, how to achieve this....
View 3 Replies
View Related
Jul 16, 2015
I'm looking to replace text in a given column given a set of conditions in the other columns. Please see below the M query in the advance editor and in particular the bold text. Here I've created a new entry that would appear in the query applied steps window in the power query editor that I have called "Replace Values". The logic is if Data.Column4 column equals "London" then replace null values in Data.Column5 with London. However when I save the query below I get the error
Expression.Error: There is an unknown identifier. Did you use the [field] shorthand for a _[field] outside of an 'each' expression?
I plan to change the expression to test for multiple conditions however I need to get the basic expression working first. The other frustration i had with the "if" statement is it had to have an else even though I didn't require it, am i doing something wrong here?
let
FullFilePath = "C:PermanentDwellings.xlsx",
Source = Excel.Workbook(File.Contents(FullFilePath)),
#"Expanded Data" = Table.ExpandTableColumn(Source, "Data", {"Column1", "Column10", "Column11", "Column12", "Column13", "Column14", "Column15", "Column16",
[Code] ....
View 8 Replies
View Related
Aug 26, 2015
I want to show on Power BI Dashboard a moving average - for example, I want to always show the last 30 measurement of body temperature but it looks like Power BI dashboard shows all measurements I have and compress them - which makes the dashboard ugly.
I tried to customize the X-axis properties but I dont know what I should change the default start/stop properties to (where the default property value is automatic).
[URL]
View 3 Replies
View Related
Jul 8, 2015
I have two data tables:
1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost
The tables have a common key named obviously as Key. The data looks like this:
Key
Facility
Line
Time
Output
Alpha
I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.
View 5 Replies
View Related
Oct 13, 2015
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
HASONEVALUE(dimSalesCompanies[SalesCompany])
;IF(
VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
;[Sales]
)
;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
View 3 Replies
View Related
Oct 14, 2015
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]
View 13 Replies
View Related
Aug 17, 2015
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
View 3 Replies
View Related
Mar 11, 2015
I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
View 24 Replies
View Related
Sep 29, 2015
We are trying to build dashboards using Power BI desktop version with Power Pivot data model as a back end. To import the data to Power BI,we used Import ->Excel workbook contents option and successfully imported the model to Power BI .When I tried to refresh the Power BI,It's hitting the backend tables available in the power Pivot model. But my requirement is I need to refresh the Power BI from the power Pivot Datamodel(I'm expecting an option like Import from Power Pivot in Tableau).
View 10 Replies
View Related
Sep 18, 2015
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
View 3 Replies
View Related
Nov 23, 2015
I have a data table that contains budget and actual data by month. I use the data to create a pivot that shows actual results next to budgeted results. I need a column that shows that variance between those columns. I think my issue is that the "Type" field contains actual and Budget. I sum on "Type". I can't seem to create a sum since those items are in the same field or am I missing something?
Table design
Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100
Output Design
DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt
View 4 Replies
View Related
Oct 9, 2015
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102
View 8 Replies
View Related
Jul 8, 2015
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
View 2 Replies
View Related
Apr 29, 2015
I have a pivot table that connects to our data warehouse via a PowerPivot connection. The data contains a bunch of comment fields that are each between 250 and 500 characters. I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
View 2 Replies
View Related
Jul 2, 2015
I have 2 table below:
Table 1:
Product No Quantity
A
Table 2:
Product No Receiving Quantity Type
A 10 NR
A 5 CN
A 6 NR
A 7 DC
A 6 CN
I want to sum Receiving Quantity with Type "CN" OR "DC". The result of Quantity in Table 1 should be like this:
Product No Quantity
A 12
View 3 Replies
View Related
Jun 2, 2015
Is it possible to get difference between two dates - first one and last one per every group in table (records are sorted by ID)?
ID Group Date
739 Group 1 2015-04-17 14:27
740 Group 1 2015-04-19 06:51
760 Group 1 2015-04-19 11:51
762 Group 1 2015-04-21 09:30
763 Group 1 2015-04-20 09:20
[Code] ....
View 4 Replies
View Related
Aug 14, 2015
I tried below measure to get the YTD running product and its working fine for me. but I found one issue that its give me slow performance while I see running product by different dimension level.
YTD Return:= IF(HASONEVALUE(Calender[Year])),
POWER(10,SUMX(
FILTER(ALL(Calendar), Calender[Year] = VALUES(Calender[Year]) && Calendar[Date] <= MAX(Calendar[Date])),
IF([Return (%)] > -1, LOG(1+[Return (%)])
), -1
View 10 Replies
View Related
Nov 12, 2015
I am having trouble making this DAX formula work. This is my test data including the column "rank" which is a row_number with partition by generated using T-SQL. (The nature of the data is that the "Measure" will always increase cumulatively per month and I want the maximum "measure" to equal a rank of 1).What I need is a second RANK column which updates dynamically so that if I select just some of the Months, they will rank from 1 +. E.g:
View 6 Replies
View Related
May 20, 2015
I've been working with powerpivot and I'm trying to compare 2 text values that are in 2 different tables.For example in TableA I have the column Value and I have the values G and C. What I'm trying to do in TableB is compare the values from TableB with TableA.BOTH values are text but I keep getting an error
=IF(TableB[Value]=TableA[Value], 1,0)
For some reason the TableB doesn't recognize TableB[Value] as text...
View 3 Replies
View Related
