Simple example:
declare @tTable(col1 int)
insert into @tTable(col1) values (1)
select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
I pulled some examples of using a subquery pivot to build a temp table, but cannot get it to work.
IF OBJECT_ID('tempdb..#Pyr') IS NOT NULL DROP TABLE #Pyr GO SELECT vst_int_id, [4981] AS Primary_Ins, [4978] AS Secondary_Ins,
[code]....
The problems I am having are with the integer data being used to create temp table fields. The bracketed numbers on line 7-10 give me an invalid column name error each. In the 'FOR', I get another error "Incorrect syntax near 'FOR'. Expecting '(', or '.'.". The first integer in the "IN" gives me an "Incorrect syntax near '[4981]'. Expecting '(' or SELECT". I will post the definitions from another effort below.
I cannot create a measure that returns results for dates that do not exist in the fact table despite the fact that the components included in the measure contain valid results for these same dates.Creature a measure that counts the number of days where the "stock qty" is below the "avg monthly sales qty for the last 12 months" (rolling measure).Here is the DAX code I have tried for the measure (note that filter explicitly refers to the date table (called Calendar) and not the fact table):
Below you can see the sub measures (circled in red) are giving results for all days in the calendar.Highlighted in yellow are dates for which the StkOutCnt measure is not returning a result. Having investigated these blank dates, I am pretty confident that they are dates for which there are no transactions in the fact table (weekends, public holidays etc...).why I am getting an "inner join" with my fact table dates despite the fact that this is not requested anywhere in the dax code and that the two sub measures are behaving normally?
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator): =CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1])) Records in time interval (numerator): =COUNTROWS(analyticJudConsist) Percent: =[countrows]/[denominatorCare]
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
I have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values. 2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))) Here is the formula for the percent: =(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
I have a data table that contains budget and actual data by month. I use the data to create a pivot that shows actual results next to budgeted results. I need a column that shows that variance between those columns. I think my issue is that the "Type" field contains actual and Budget. I sum on "Type". I can't seem to create a sum since those items are in the same field or am I missing something?
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. How do I resolve this.
Below are the steps I go thru to print
1. Select slicers in unfiltered position (ALL) 2. Select entire pivot table 3. Select Page layout and select print area. 4. Save 5. Click on Print Preview to preview the print 6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
I am trying to show images in a product listing in power view.I work with an excel 2013 desktop version based on an office 365 pro account.I did the following steps:
import of an excel file with an article list via power query and loading the data to the data model import jpg images from a folder via power query, setting content as binary type and loading the data to the data modellinking both tables in power pivot--> manage via the image namesetting the table behavior for the images table under power pivot --> manage --> Advanced (e.g. Default Image: Content)opening power view and building article cards with article number and imageProblem: only a camera icon shows up in power view
Is there a solution with a desktop version?Can I use my Office 365 Pro account to make it work? How?Why is there no solution showing images in a pivot table?Link to Dropbox with power pivot files
I need to select and mark 150 records at a time in a large table.What I'm trying to do is...Select top 150 xxxx into #temp from largeTableupdate largeTable set marked = 1 where xxxx in #tempThis is very simplified, the real procedure is quite large.The Error I am getting isInvalid object name '#temp'.
I'm pretty new with temp tables, i have this code that works fine as a normal query . but i want to put it in a stored procedure, so i can use it more then one. What do i need to change in the code for this to work. I also wanted to add to parematers to it. I know how to do parameters in stored procedures, but im more worried about getting this code in a stored procedure. any help will be greatly appreciated.
Code Snippet
USE fssrc SET NOCOUNT ON SELECT cr.sales_entity_code 'Territory' , sp.name 'SE', Date = CONVERT(char(12),DATEADD(day, (qh.cycle_day-1), p.start_date),6), qh.entity_code 'Customer', c.name 'Name', c.address2 'Address2', c.post_code 'PostCode', q.question_code 'Question Code', q.description 'Question', qt.description 'Response Type', qh.response 'Response' INTO #results FROM question_history qh, customer_relationship cr, sales_person sp, period p, questions q, customer c, question_type qt WHERE cr.customer_code = qh.entity_code AND qh.period_code = p.period_code AND sp.sales_entity_code = cr.sales_entity_code AND qh.question_code = q.question_code AND cr.customer_code = c.customer_code AND q.type_code = qt.type_code go SELECT distinct #results.* FROM #results ORDER BY #results.DATE, #results.territory, #results.se DROP TABLE #results
Could someone help me get this stored procedure to work? I want to give the stored procedure a long list of departments and have them added to a temp table. This only gets the first dept. in the temp table. I'm confused. Open to other suggestions, but want to use a 1col temp table to hold the depts.
After this is done, an SQL query is run using the temp table. Input for test: --csi_crystal_xxxx "pc9xp,pc8,pc7,pc6,pc6543,pc945678" --select * from ##CrystalGetCosts
create procedure csi_crystal_xxxx
@DeptResp varchar(4000) AS SET NOCOUNT ON DECLARE @SQL varchar(8000) DECLARE @Dept varchar(10) DECLARE @iLen int DECLARE @iPtr int DECLARE @iEnd int
If Exists (Select name, Type From [tempdb]..[sysobjects] where name = '##CrystalGetCosts' And Type = 'U') Drop table ##CrystalGetCosts
CREATE TABLE ##CrystalGetCosts (Dept_Resp_No varchar(10)) Set @iLen=Len(@DeptResp) Set @iPtr = 1 While @iPtr < @iLen BEGIN SET @iEND = charindex(',',@DeptResp,@iPtr) Set @Dept= Substring (@DeptResp,@iPtr,@iEnd-1) INSERT INTO ##CrystalGetCosts Values (@Dept) Set @iPtr = @iEnd + @iLen END
Hi I have a search page having four fields. Giving any one of the field as input should retrieve search results in Gridview. In GridView1 i have child Gridview for displaying details related to Gridview 1.
now i have to write storedprocedure for getting values in two grids. there is one matching column in two tables i.e CNo.from first select statement we have to capture CNo and basing on that retrieve second table values.
I have a stored procedure for that but my problem is i stored CNo in temp table i.e @MyTable .after doing select statements from two tables i want to delete @MyTable. But iam not able to. so pls help me
My stored procedure code is here:
set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
ALTER PROCEDURE [dbo].[search1] (@val1 varchar(225), @val2 varchar(50), @val3 varchar(50), @val4 varchar(50)) AS BEGIN
DECLARE @MyTable table (CNo varchar(255))
INSERT @MyTable
Select CNo From customer where ((@val1 IS NULL) or (CNo = @val1)) AND ((@val2 IS NULL) or(LastName = @val2)) AND ((@val3 IS NULL) or(FirstName = @val3)) AND ((@val4 IS NULL) or(PhoneNumber = @val4))
--Now do your two selects
SELECT *
FROM customer c
INNER JOIN @MyTable T ON c.CNo = T.CNo
Select *
From refunds r
INNER JOIN @MyTable t ON r.CNo = t.CNo
END
The output of storedprocedure is like this:
Iam getting all the columns of two tables but the CNo column is repeating twice in both the tables. so please some one help me. The CNo colum shouldnot repeat.
Creating a temporary table in stored procedure and using a sql query to insert the data in temp. table.I am facing the error as : String or binary data would be truncated.The statement has been terminated. The procedure i created is as : ALTER PROCEDURE fetchpersondetails AS CREATE Table #tempperson (personID int,FirstName nvarchar(200),LastName nvarchar(250),title nvarchar(150),Profession nvarchar(200),StreetAddress nvarchar(300), StateAddress nvarchar(200),CityAddress nvarchar(200),CountryAddress nvarchar(200),ZipAddress nvarchar(200),Telephone nvarchar(200),Mobile nvarchar(200), Fax nvarchar(200),Email nvarchar(250),NotesPub ntext,Affiliation nvarchar(200),Category nvarchar(200))
Insert into #tempperson SELECT dbo.tblperson.personID, ISNULL(dbo.tblperson.fName, N'') + ' ' + ISNULL(dbo.tblperson.mName, N'') AS FirstName, dbo.tblperson.lname AS LastName, dbo.tblperson.honor AS Title, dbo.tblperson.title AS Profession, dbo.tblperson.street + ' ' + ISNULL(dbo.tblperson.suite, N'') AS StreetAddress, dbo.tblperson.city AS cityaddress, dbo.tblperson.state AS stateaddress, dbo.tblperson.postalCode AS zipaddress, dbo.tblperson.Phone1 + ',' + ISNULL(dbo.tblperson.Phone2, N'') + ',' + ISNULL(dbo.tblperson.Phone3, N'') AS Telephone, dbo.tblperson.mobilePhone AS mobile, dbo.tblperson.officeFax + ',' + ISNULL(dbo.tblperson.altOfficeFax, N'') + ',' + ISNULL(dbo.tblperson.altOfficeFax2, N'') AS Fax, ISNULL(dbo.tblperson.Email1, N'') + ',' + ISNULL(dbo.tblperson.Email2, N'') + ',' + ISNULL(dbo.tblperson.Email3, N'') AS Email, dbo.tblperson.notes AS NotesPub, dbo.tblOrganizations.orgName AS Affiliation, dbo.tblOrganizations.orgCategory AS Category, dbo.tblCountry.countryNameFull AS countryaddress FROM dbo.tblperson INNER JOIN dbo.tblOrganizations ON dbo.tblperson.orgID = dbo.tblOrganizations.orgID INNER JOIN dbo.tblCountry ON dbo.tblperson.countryCode = dbo.tblCountry.ISOCode
I'm working on building a report and asked a developer which table some data comes from in an application. His answer was the name of a 3500 line stored procedure that returns 2 result sets. I could accomplish what I'm trying to do using the second result set, but I'm not sure how to put that into a temporary table so that I could use it.
Here's my plan according to the Kübler-Ross software development lifecycle:
Denial - Ask the developer to make sure this is correct (done) Despair - Look hopelessly for a solution (where I am now) Anger - Chastise developer Bargaining - See if I can get him to at least swap the order that the resultsets are returned Acceptance - Tell the users that this can't be done at present.
I've a requirement to store the output of the stored procedure into temp. tables/ table varibles. I've 4 select statements as my output of the stored procedure. How do I store the results of all the 4 select stmnts into 4 different temp tables.
Simplified SP is as...
Create procedure usp_test as begin
select c1,c2 from table1 select c3,4 from table2 select c9,c8 from table3 select c5,c7 from Table4 end
I'm expecting something like this...
declare @table1 table (c1, c2) insert into @table1 Exec <Sp_Name>
select * from @table1
I know the above stmnt works, if my SP has only 1 select stmnt as output. Please help me to acheive this for multiple select statements.
I have a pivot table that connects to our data warehouse via a PowerPivot connection. The data contains a bunch of comment fields that are each between 250 and 500 characters. I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
I would like to know if the following sql can be used to obtain specific columns from calling a stored procedure with parameters:
/* Create TempTable */ CREATE TABLE #tempTable (MyDate SMALLDATETIME, IntValue INT) GO /* Run SP and Insert Value in TempTable */ INSERT INTO #tempTable (MyDate, IntValue) EXEC TestSP @parm1, @parm2
If the above does not work or there is a better way to accomplish this goal, how to change the sql?
I need to create a Stored Procedure in SQL server which passes 6 input parameters Eg:
ALTER procedure [dbo].[sp_extract_Missing_Price] @DisplayStart datetime, @yearStart datetime, @quarterStart datetime, @monthStart datetime, @index int as
Once I declare the attributes I need to create a Temp table and update the data in it. Creating temp table
Once I have created the Temp table following query I need to run
SELECT date FROM #tempTable WHERE #temp.date NOT IN (SELECT date FROM mytable WHERE mytable.date IN (list-of-input-attributes) and index = @index)
The above query might return null result or a date .
In case null return output as "DataNotMissing" In case not null return date and string as "Datamissing"
hi,I wish to create a temporary table who's name is dynamic based on theargument.ALTER PROCEDURE [dbo].[generateTicketTable]@PID1 VARCHAR(50),@PID2 VARCHAR(50),@TICKET VARCHAR(20)ASBEGINSET NOCOUNT ON;DECLARE @DATA XMLSET @DATA = (SELECT dbo.getHistoryLocationXMLF (@PID1, @PID2) as data)CREATE TABLE ##@TICKET (DATA XML)INSERT INTO ##@TICKET VALUES(@DATA)ENDis what i have so far - although it just creates a table with a name of##@TICKET - which isn't what i want. I want it to evaluate the name.any ideas?
1. Fact table with sales by customer, Territory ID etc 2. Table with targets per Territory ID
I want two combine them in one pivot table.
Pivot: Territory;Sales;Target
What I'm getting is the correct column with sales, but the overall sum of all territories in column for targets.Relationship is established between two tables via Territory ID
I have a text file which I used as an initial load of data, containing a little over a million rows. I would like to produce a daily "update" file, which contains changes to existing rows, and creation of new rows. What is the best method of updating the existing table in power pivot?
