Pre-Execute AcquireConnection Method Call Fails Inside Sequence Container (transaction Required)
Jun 1, 2006
I've created an SSIS package that contains a Sequence Container with TransactionOption = Required. Within the container, there are a number of Execute Package Task components running in a serial fashion which are responsible for performing "Upserts" to dimension and fact tables on our production server. The destination db configuration is loaded into each of these packages using an XML configuration file. The structure of these "Upsert" packages are nearly identical, while some execute correctly and others fail. Those that fail all provide the same error messages.
These messages appear during Pre-Execute
[Insert new dimension record [1627]] Error: The AcquireConnection method call to the connection manager "DW" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "Insert new dimension record" (1627) failed the pre-execute phase and returned error code 0xC020801C.
... which are followed by
[Connection manager "DW"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "DW"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
While still in debug mode, I can check the properties of the "DW" connection and successfully test the connection within the packages that fail.
The same packages run successfully when tested outside the container (i.e. no transaction) or when the configuration file is modified to point the "DW" connection to a development version of the db which is running on the same server as the source database.
I have successfully used DTCtester to verify that transactions from source to destination server are working correctly. Also tried setting DelayValidation = True with no change. I have opened a case with Microsoft and am awaiting a reply so I thought I'd throw a post out here to see if anyone else has encountered this and might have a resolution. Here's some more on the environment:
Source Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2005 Enterprise Edition SP0
Destination Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2000 Enterprise Edition SP3 (clustered)
Thank you in advance for any feedback you might be able to provide.
KS
View 4 Replies
ADVERTISEMENT
May 9, 2006
I have a SSIS package that reads the data from an Excel file using an Excel Connection Manager and imports the data to a table on a SQL Server 2005 DB instance.
When I run this package locally on the server the package being on the file system, the package executes perfectly. Now I upload the package to the msdb database and the run the package from there and the package still executes successfully.
Now I schedule the package to run as a SQL Server Agent job and the package fails and when the logging is enabled I see this in the log file;
OnError,WEB-INTSQL,NT AUTHORITYSYSTEM,Copy to CRN-ALLOCATION_COMMENTS_TEMP,{40A6BF6E-7121-448B-A49D-DED58FDC746A},{BD991566-F4BD-41BC-AEBF-264032D8D0D3},5/9/2006 1:54:52 PM,5/9/2006 1:54:52 PM,-1071611876,0x,The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
OnError,WEB-INTSQL,NT AUTHORITYSYSTEM,Copy to CRN-ALLOCATION_COMMENTS_TEMP,{40A6BF6E-7121-448B-A49D-DED58FDC746A},{BD991566-F4BD-41BC-AEBF-264032D8D0D3},5/9/2006 1:54:52 PM,5/9/2006 1:54:52 PM,-1073450985,0x,component "Allocation Comments" (1) failed validation and returned error code 0xC020801C.
I am wondering why the AcquireConnection method call is failing when the package is scheduled? I am running the step as a SQL Agent Service Account and it is the Local System account that starts up the SQL Server Agent and Server and is an Administrator on the box.
Any inputs will be much appreciated.
Thanks,
M.Shah
View 7 Replies
View Related
Jul 25, 2007
Has anyone ever seen this issue?
If i place a loop container inside a sequence container the connectors within the loop container disappear.... is this a bug - will the loop tasks still run in the correct order?? or will they fire off willy nilly??
View 4 Replies
View Related
Feb 13, 2008
Hi All,
I have a DB2 database on aix server. we had to move some tables to SQL Server 2005. We created individual SSIS files for each table and saved it on the desktop. When I run the package file by double clicking on it the "Execute Package Utility" dialogue box appears and I can click on the "Execute" button and everything goes fine.
But if I try to open the same package using "SQL Server Business Intelligence Devlopment Studio" or to run the same package with DTEXEC /f <Filename> , it gives me below error.
=====================================================================================
Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
=====================================================================================
I am stuck on this error and need help!!!
Shailesh
View 1 Replies
View Related
Aug 11, 2005
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
View 9 Replies
View Related
Dec 7, 2005
I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
View 73 Replies
View Related
Aug 30, 2006
Hi all,
I am facing a problem with the connection method, it says,
"[Store [10069]] Error: The AcquireConnection method call to the connection manager "Data Source Destination" failed with error code 0xC001A004. "
(Store - Look up component.)
This problem occurs only when i am using Transaction option, all the component(Look up,Destination etc) says the same error message in the Pre-Execute phase. But i can open the component and can able to see the data in preview.
And also this is not occuring in our testing environment. We have copied the same pakages in our production, the package failed stating the above. I can not simulate the same problem in my testing server.
Has anyone faced this kind of problem? please help me to solve this.
Thanks.
-Swarna.
View 17 Replies
View Related
Feb 17, 2006
The package runs fine if I run it by itself. Unfortunately we want to call it from another package and when we do so it fails everytime with the following error; "AcquireConnection method call to the connection manager "BPCSF" failed with error code 0xC0202009." This package is calling an AS400 and pulling data from it into a staging environment. The task that is failing is 4th task on the list and is the 3rd task to call the AS400 environment. If I need to provide more information I would be happy to do so. Any help would be greatly appreciated. Thanks!
-Krusty
View 1 Replies
View Related
Oct 9, 2007
I can run this package in Studio and it works fine, but when I run it from SQL Server Agent, it throws this error. Does anybody know what would cause this problem. This appears to occur during validation for the package because none of the data flow steps run. The connection being used is the same connection used in all of the data flows. If validation is done in order, then prior steps using the same connection are passing validation.
Thanks,
Steve
View 5 Replies
View Related
Aug 20, 2007
Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009.
Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
View 1 Replies
View Related
Feb 14, 2008
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
View 5 Replies
View Related
Apr 27, 2007
Hello everyone,
I am struggling with this error and it's starting to get to me!
I have setup a simple project with just a data flow task. In this task, it retrieves a simple record "Select * From Table1 WhereId=1". The connection is an OLE Db connection using Advantage Oledb Provider (a provider for accessing dBase). It is accessing a Novell network drive. I have setup the package to both "EncryptSensitiveWithPassword" and "DontSaveSensitive". Both times i have received this error.
The funny thing is, when I set the package to "EncryptSensitiveWithPassword" and I setup a job to run the package, it never asks me for the password even though I set one up! I have a previous package (few months ago I made) that accessed the same database on the same Network drive and it works! It also asks me for a password when I try to modify or run the package (b/c I set it to "EncryptW/Password").
Can anyone give any light into this problem?
Thansk for all your support,
Adrian
View 1 Replies
View Related
Apr 14, 2008
I'd like to cancel my long running Reports via ReportingService2005.CancelJob(). It seems, while I'm able to start a job I don't have the permission to cancel it. I always get the error message:
The permissions granted to user '<my-account>' are insufficient for performing this operation.
Do I have the be a member of a special group on the server running the Reporting Services?
werner
View 3 Replies
View Related
Dec 7, 2006
I am looping through xml files and validating them with the XML Task. On sucess I want to perform task 2, on failure I want to perform task 3. When one file fails to validate all subsequent tasks fail.
I have also tried putting the result in a variable instead of using the success constraint. I get the same result, the variable keeps the failed value after the first file fails. Any advise is greatly appreciated.
View 7 Replies
View Related
Mar 24, 2008
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
View 2 Replies
View Related
Mar 11, 2008
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
View 27 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Apr 26, 2006
i am trying to insert data into a table and roll back if this fails. What i have done is created an Execute SQL task with a SQL statement of BEGIN TRANS .. if the constraint = success then it goes to a Sequence Conatiner that amoungst other thing includes an Execute SQl task that does INSERT statement . outsied of the container i have 2 execute sql tasks that to a COMMIT TRANS ond a ROLLBACK Trans . when executing it i get an error the Rollback Transaction request has no corrasponding Begin tranaction. I have seen this in a SSIS created by one of the Wizards and it works fine, im oviously missing something fundemental .. any pointers ?
View 1 Replies
View Related
Mar 6, 2008
hi people, i have crashed on a this problem. I have a sequence container and on this container I have set "FailPackageOnFailure=true". Now in this container there are 2 tasks. The first one is preceeding the second one. Now both this task have set "FailParentOnFailure=true". Both task are the same and their purpose is to drop table A.
1) I run the package and it fails, because there is no table to drop.
2) I create the table manualy and run package again.
3) I see, that the first task is beeing just SIMPLE OMMITED and the second task runs
In general, everytime any task in a sequence container invokes failure, next time is beeing ommited regardelss of its status. How can this be fixed ? Thanks
View 4 Replies
View Related
Feb 16, 2007
I am attempting to open up my ssis integration project but when I try to open up packages it says @ the bottom "Validating Sequence Container" and it just stays there. I cannot click on anything and nothing is responsive. Does anyone know why this is happening?
View 9 Replies
View Related
Oct 4, 2006
I have a package that is going to have roughly 20 sequence containers in it. Each of these containers is going to have the same start task and the same end task. The data flow task(s) in each sequence container will differ. So I was thinking I would create a custom sequence container that would implement the common steps I need in each of my containers. I started to create a task that would inherit from Sequence, but I found that it is sealed. Bummer.
What is involved in creating a sequence task by inheriting from Task? I see that Sequence implements IDtsSequence. But looking at this interface, it seems like I would have to build the logic to execute the workflow contained in my sequence.
Any pointers?
-Darrell
View 6 Replies
View Related
Apr 14, 2006
Has anyone had any trouble moving a package using a OLE DB Connection Manager reading DBASE IV files? While developing I never had a problem, the confiugration string described int his thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=76237&SiteID=1) worked just fine. Since I have enabled Configurations, my package will always fail when trying to read the dbf file. I've gone through just about every setting in the config file that I can think of.
Information: 0x4004300A at MyDataFlow, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at MyPackage, Connection manager "MyDBASEIVConnManager": An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at MyDataFlow, OLEDBFileSource [15]: The AcquireConnection method call to the connection manager "MyDBASEIVConnManager" failed with error code 0xC0202009.
Error: 0xC0047017 at MyDataFlow, DTS.Pipeline: component "OLEDBFileSource" (15) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at MyDataFlow, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at MyDataFlow: There were errors during task validation.
View 3 Replies
View Related
Nov 8, 2006
I have a package that contains multiple SEQUENCE CONTAINERS,
each execute a bunch of tasks. I try to use the script task to dynamically
disable or enable each of these SEQUENCE CONTAINERS base on parameters that pass
in from parent package, but for some reason, I can€™t set the disable value to
True/False at runtime. Anyone knows how to do this?
View 5 Replies
View Related
Sep 21, 2006
Hi everyone,
Our VB application throws .dtsx on-demand by using Threads. Everything's fine but a little detail:
when it goes to launch a SSIS package with a only task, concretely a Sequence Container task (empty, without tasks inside) fails Prevalidate method.
Attach you the snippet of code:
pkgResults = pkg.Validate(Nothing, Nothing, EventsSSIS, Nothing) -- pkgResults returns me Failure {1}
If pkgResults = DTSExecResult.Success Then
..
..
Validate method, as usual, do EVENTSSSIS.PreValidate event and after that, returns instead of follow raising events.
Perhaps it's mandatory to set one task as a minimum, I don't get the point at all
Any guidance or thought will be welcomed,
Thanks in advance and regards,
View 5 Replies
View Related
Jan 10, 2008
I am working with SSIS and use Sequence Conatiners extensively. I have become frustrated enought to stop what I am doing and create this thread in the MSDN SSIS forum.
When working with expanded container objects, constraint objects connecting control objects not in the container can be seen. The control object is hidden (sent ot back) but the constraint objects remain visible (sent to front.)
This is extremely frustrating as the unwanted constraint object can be interacted with and not only interfers with the visual presentation during design, it also allows for unintended changes.
I have implemented SSIS upgrades from MDSN but either haven't implemented the appropriate upgrade or an upgrade doesn't exist for this.
Are there any suggestins or comments that can help me get my sanity back?
Yours,
srankin1957
View 5 Replies
View Related
May 17, 2007
Hi,
I have a sequence container that contains a bunch of tasks.
I have a failure constraint that goes from the sequence container to execute sql task. The execute sql task then sends out an email upon a failure of the container, which is triggered by the failure of any given task inside the container.
My question is, is there a way to pass a SPECIFIC error message to the execute sql task?? That is, if one of the components inside the sequence container fails, I would like the email message to reflect the error message of that particular component, not just that the container failed, as there are different levels of severity of errors, depending on which component failed.
Thanks much
View 5 Replies
View Related
Aug 27, 2006
Hi,
A very strange thing happened to me. I have a package that includes two For each loop containers. Each container has script tasks, sequence containers, etc. Both are Foreach ADO Enumerator basis. It works without any problems until I changed the position of one of them in the Control flow and added some code in the script task. After these changes I executed the package and both of For each loop containers did not execute the tasks inside of them, any task. However the execution color on the containers was green (success). How can it be?
Your help is much welcome. Thanks in Advance.
João Cruz
View 2 Replies
View Related
May 16, 2015
I have (6) sequence containers, each with a data flow task and script task. The script task renames the file and the data flow uses an OLE DB Source connection to export to a flat file using the Flat File Destination connection.For sI have been unable to move from the 1st sequence container to the 2nd (and the next and so on...). I am trying to do this "on success" (on failure I generate an email notification within each container), but am apparently missing a piece to this because after the sequence container executes, which it does successfully, nothing happens.
View 4 Replies
View Related
Nov 28, 2005
I am creating a staging database in which I am loading required tables from 2 different sources.
I have 30 different tables to load from source 1 and 10 different tables from source 2.
This is the way I am doing, in Control flow task I am using Sequence container and in that I included the data flow task, the data flow task
has source OLD DB connection from where I select the table and then destination OLE DB connection where I load the data.
So for 30 tables I have one Sequence container with 30 different data flow task and each data flow task has OLE DB source and OLD DB destination.
I wanted to find out if this is the efficient way to do, or if there is any other way to do this.
And for source 2 shall I put in another package or shall I use the same package with different sequence container and follow the same steps
as for Source 1 tables.
Please advice.
Thanks,
View 19 Replies
View Related
Sep 21, 2015
I have a sequence container in my Package and this sequence has more than one control flow tasks.
Can I create the checkpoints such that only the failed component inside the sequence container runs again and not the other successful components/tasks in the sequence container?
View 3 Replies
View Related
Jan 26, 2006
I have a Sequence Container with an Exec SQL Task in it. I can't delete the task or the container. I can't disable them.
Here's how I got there:
I put a Dataflow Task and the Exec SQL Task in the container, then set a precedence constraint. Lots of complaints moving either of them. Managed to delete the Dataflow Task, but now can't do anything.
Any dieas?
Laurence
View 1 Replies
View Related
Sep 21, 2015
I have an SSIS package that is pretty simple.
An Execute SQL task returns one row with two values that are correctly stored into variables.
Based off those two variables, a sequence container is chosen to execute.
That sequence container then does magic. The last step of the container has an execute SQL task that runs and stores the result in a variable - let's call this[User::result] with type Int32.
Based off the value in [User::result] one of two final tasks run. A non zero value executes one task; a zero value executes another. Basically,SOMETHING runs after this.
Simple? I thought so... except Step 4 doesn't work. If I set a post-execute breakpoint on the sequence container, the variables are populated as expected, but nothing else runs. If I add another task to run (without a conditional expression) to run after the sequence container completes, the pre-execute breakpoint shows the data looking exactly as I expect.
Those script tasks are just MessageBox.Show calls and the expression, as you can see, doesn't use variables at all.
View 5 Replies
View Related
Aug 19, 2015
I have a sequence container with 2 task into. If one of the tasks alert a failure then the sequence container should alert a failure too, but it doesn't. For testing I forced the error with setting the attribute ForceExecutionResult to Failure for one of the tasks. The task fails, but the sequence container succeeds.
I tried:
- changed the Precedence Constraints from AND to OR between the 2 tasks into the sequence container
- changed the attribute FailPackageOnFailure setting True
- changed the attribute FailParentOnFailure setting True
but nothing happened.
View 2 Replies
View Related
