What happens during the pre-execute phase?
Is there anything I can do to optimize it's execution?
I have a package that takes data from 2 SQL Server sources, unions them, and writes to a sql table.
The pre-execute takes 20 minutes, and the execution takes 45 seconds.
Thanks
BobP
Does anyone know why SSIS sometimes just sits in the Pre-Execute phase of a data flow and does nothing? It doesn't matter how elaborate the data flow is or the volume of data. It can sometimes take 80% of the task's run time.
View 44 Replies View RelatedHi,
View 9 Replies View RelatedHi,
I have a SSIS package which pumps data from one server to other without any additional steps. There are 11 tables for which data is transferred. And this packages runs fine on two different environments but fails in one environment i.e. on SIT.
It doesn't throw any error and every time stops at the below step
[DTS.Pipeline] Information: Pre-Execute phase is beginning.
Progress: Pre-Execute - 0 percent complete
Progress: Pre-Execute - 1 percent complete
Progress: Pre-Execute - 2 percent complete
Progress: Pre-Execute - 3 percent complete
Progress: Pre-Execute - 4 percent complete
Progress: Pre-Execute - 5 percent complete
Progress: Pre-Execute - 6 percent complete
Progress: Pre-Execute - 7 percent complete
It doesn't complete neither throws an error. Any pointers on what the problem could be
Thanks
Hi all,
I have a monster SQL query (SQL Server connection) that I'm trying to export to flat file. My package appears to just stick on the "Pre-Execute phase is beginning" stage. (I left it running overnight, and it's still going... no error message, I think it's just hung. If I include a "Top 10" in the my source query it completes without a problem. I'm wondering if it's an out-of-memory issue, but when I've run into this in the past there have been error messages generated. I've tried using both a Data Reader and an OLEDB Datasource. Does anyone have any ideas of what's going on and how I might fix it?
Thanks!!!Jess
Hi All
I have a SSIS package running and tested fine on my desktop. However when I deploy the package to my server I get the error given below.
SSIS package "CR Sec Watch List 2.dtsx" starting.
Information: 0x4001100A at Transform Master Files: Starting distributed transaction for this container.
Information: 0x4004300A at Transform Master Files, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Transform Master Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Transform Master Files, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Transform Master Files, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Transform Master Files, Excel Source [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
Error: 0xC0208265 at Transform Master Files, Excel Source [1]: Failed to retrieve long data for column "NKoreaPoi".
Error: 0xC020901C at Transform Master Files, Excel Source [1]: There was an error with output "Excel Source Output" (9) on component "Excel Source" (1). The column status returned was: "DBSTATUS_UNAVAILABLE".
Error: 0xC0209029 at Transform Master Files, Excel Source [1]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output "Excel Source Output" (9)" failed because error code 0xC0209071 occurred, and the error row disposition on "component "Excel Source" (1)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047038 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Excel Source" (1) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Transform Master Files, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Transform Master Files, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Transform Master Files, DTS.Pipeline: "component "SQL Server Destination" (20)" wrote 0 rows.
Task failed: Transform Master Files
Information: 0x4001100C at Transform Master Files: Aborting the current distributed transaction.
Warning: 0x80019002 at Process Master Files: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (8) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CR Sec Watch List 2.dtsx" finished: Success
For some reason it tells me that it not able to retrive the long data for a column. The column mentioned in the error contains special characters.
Once again, there seems to be no problem with the package as the package runs fine on my desktop.
Any help or clues as to why this is happening on my server is greatly appreciated.
Regards
Ryan
I have a project which spans multiple servers and aggregates literally billions of rows of data into a much smaller and manageable result set which I store on another server. There are two stored procedures which take up 99.9% of the processing time. Each one of these SPs are estimated to run over 3 hours a piece (gives you an indication of how much data there really is). With in this SSIS package, I have two control flows, one for each SP. When I run the SSIS package from VS2005, I can see that there is a pre-execute phase which takes about an hour abnd a half to complete, and then move on to executing. My question is, what the heck is this, and what is it doing? I know it validates the sql in the procedure, but does it actually run the SP during that pre-execute phase? If it does, is there any way to get around that?
Any help would be appreciated.
I have a fuzzy lookup in a data flow but this data flow never gets pass pre-execute phase. What is the problem?
Thanks
How to implement two pase commit in SQL Server 2000, Is there Database Link link Oracle available here ?
View 5 Replies View RelatedDoe's anyone have a good article on it ?
Thanks
Avi
Hi All,
Server A has been configured as distributor, publisher and push subscription to Server B. Replication works fine from A to B. But B to A gives an error "OLE DB Provider SQLOLEDB does not support distributed transaction".
The other way I tried is :
Server B has been configured as distributor, publisher and push subscription to Server A. Replication works fine from B to A. But A to B gives an error "OLE DB Provider SQLOLEDB does not support distributed transaction".
Regards,
Suresh.
Hello ,My question is:does ms sql support two phase commit protocol?and Why if no.How if yes.Thank you
View 2 Replies View RelatedHi, My package hangs and the log says DTS.Pipeline: Validation phase is beginning. Any ideas why this is happennig? This same package runs fine when I run it without turning on the transaction.
View 4 Replies View RelatedI'm running SQL Server 2008 R2 with latest patch. I'm performing all index maintenance online. How long the final phase of the index operation takes? Does the size of the index matter and if any blocking occurs, does the duration increase because the size of indexes is larger? I've been told by management, we can not have any downtime, its my understanding even with online index there's a chance blocking can occur in the final phase of the index operation. My database and index size is over 1.5 tb and the number of transaction per second are in the 100's.
View 2 Replies View RelatedI posted this to the ms sql clustering news group, but I thought I'dpost it here just in case someone here knew the answser. This problemhas had me baffled for 5 months, and I'm not seeing any supportarticles from Microsoft on it, yet. Anyone here got a clue?About 5 months ago, I posted a query to this group after experiencingfailures with my database maintenance plans (during the verify phase)that run on SQL Clusters on Windows 2003(http://groups-beta.google.com/group...9b?dmode=source)I was re-posting this in hopes that someone knows of a fix besidescoding a home-brew verify step in to the backup job to check the file'sintegrity?Thanks,TW
View 1 Replies View RelatedHello,
I have noticed that for one of my data-flows, the process is really long during the phase "the final commit data insertion has started".
To be accurate, the process is fast until it reaches this phase. It happens often when I load millions of lines.
The extraction is done from a database SQL Server 2005 to a database SQL Server 2005, on the same server (with the SQL Server native provider).
I used a SQL Server destination but I have tried with an OLE DB destination and it is the same situation.
Why the process could be so long during this phase?
There is a way to optimised my package to avoid that?
Any idea is welcome.
Thanks.
Guillaume
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
I am trying to execute a SP in the execute SQL task in SSIS 2005..
but I keep getting an error:
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Load_Gs_Modifier_1, Execute SQL Task: Executing the query "exec Load_GS_Modifier_1 ?, ?" failed with the following error: "Could not find stored procedure 'exec Load_GS_Modifier_1 ?, ?'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Load_Gs_Modifier_1
SSIS package "Package.dtsx" finis
I have set up two user parameters: startdate and enddate.. I am not sure what I am doing wrong????
I have trigger, but not execute somedata because insert few row in every second. I use java to insert data to SQL server 2005. Data inserted to a table but not executing trigger for some data.
For example 100 data every second inserted to a table.
If insert data one by one to a table trigger fires success.
Please Help me.
I am trying to return a recordset to an ASP page from a stored procedure.
The stored procedure creates a temporary table and then builds an SQL statement into a string declared with the SP. The string contains an INSERT INTO statement to insert into the temporary table and followed by a select of the rows I wish to insert into the table.
I then use the EXECUTE method to execute the SQL string. After this I have a SELECT which should select from the temporary table and return the rows i am interested in from the stored procedure.
For some reason this does not seem to work. If I execute the SP from query analyzer I get the resultset returned. However when I try to call the stored procedure from my ASP no recordset is returned. I have done this type of thing before and it has worked perfectly. Does anyone have any ideas why this may not be working? Many Thanks.
Newbie Question: I'm in EM and I want to execute a simple SQL statement (e.g. exec a sproc). How do I do it? Do I have to fire up QA? or is there a simpler way?
View 1 Replies View RelatedI don't remember where I saw it, but it looked something like this: ...exec (0x0A738... The result was identical to executing: select getdate() Anybody seen it anywhere?
View 4 Replies View Relatedhi all,
i am having stored procedure like the below one:
create procedure pro_emplname
@name varchar
as
select * from employee where ename=@name
i have tried like this to execute:
exec pro_emplname kamal
but i am not getting the output....
could any one tell.....
thanks
HI
i want to rite a sysntax in StoreProcedure that execute sysntaxes in My_file.sql .
How can i do this?
thanks
I have two instances running on a machine...
The following code will run on the named instance but not on the default instance.
On the default instance I get the following error:
Cannot execute as the user 'SA', because it does not exist or you do not have permission.
However if I specify another account it does work.
use dbReport
go
DROP procedure dbo.clarktest
GO
create procedure dbo.clarktest
WITH EXECUTE AS 'SA' -- 'DomainSqlCmdShellDev'
as
EXEC xp_cmdshell 'dir'
go
grant exec on clarktest to [spexec]
exec clarktest
use master
go
Any assistance is appreciated as the developers code needs to be coded generically i.e. "sa" this is to prevent code manipulation during migrations...
Thank you
You can do anything at www.zombo.com
I want to start of run a job from DOS. I have MS SQL 2000 using Enterprise Manager.
Thank You,
Ernie
hi,this is my stored procedure:
CREATE PROCEDURE loop As
declare @fromage bigint
begin
select @fromage=max(age) from emp1
end
begin
insert into loop values(@fromage)
end
how to run thi spc in sqlserver,please tell me
hi,
What is wrong with this please?
I am passing two variables to execute a ssis package.
Thanks
set @cmd = 'dtexec /f ' + @FullPackagePath + ' /set Package.Variables[User::FileName].Properties[Value];"' + @FullFilePath + '"' +
' Package.Variables[User::ConnectionPath].Properties[Value];"' + @ConnectionPath + '"'
print @cmd
error is:
Option "Package.Variables[User::ConnectionPath].Properties[Value];Data Source=server1databasename" is not valid.
please note I just retyped the data source name here.
Hi Everyone,
I have problem in applying 'execute as'.
Here is an exsample SP
Create procedure test
with execute as 'user1'
as
select * from people.dbo.profile
I have 2 accounts: user1 and user2.
user1 has permission to select data from people.dbo.profile but user2 doesn't. due to some reasons I don't want to grant select permission to user2.
I use user2 to execute this SP and get error message
The server principal "user1" is not able to access the database "people" under the current security context.
How can I solve it? I have been looking for solution for the whole morning.
Thank you in advance.
Hi,
I have some problems with the execute as command.
I have a proc in a database, lets call it 'source'. The proc looks like this:
create proc backup_proc
with execute as 'account2'
as
select * into destination.dbo.loaddata from source.dbo.loaddata
exec dbo.backup_proc
I also have two accounts:
account1 - limited rights
account2 - extended rights
I wan't to be able to run the proc which uses account2(extended rights) to copy a table to another database. I get this error when i try to execute the proc!
The server principal "destination" is not able to access the database "source" under the current security context.