Pre-execute Error In Simple Import/export

Mar 17, 2006

I am trying to copy data from a SQL Server 2000 DB to SQL Server 2005 DB using the import/export wizard in SQL Server Management Studio. The two databases are not identical with different table names and different columns but I thought I had set up all the right mappings and had set the 'Enable identity insert' option. When I ran the wizard it errored at the Pre-execute phase. I simplified the wizard down to one table and only as couple of varchar columns and this also errored in the same way. The error report is detailed below.

For reference the SQL2000(ent. edn) DB is on a windows 2000 server and the SQL2005(dev. edn) DB and the management studio are both on my WinXPSP2 workstation.

Could somebody explain why these errors have occured and more importantly how to rectify the problem?

Many thanks,
Michael.

Operation stopped...

- Initializing Data Flow Task (Success)

- Initializing Connections (Success)

- Setting SQL Command (Success)

- Setting Source Connection (Success)

- Setting Destination Connection (Success)

- Validating (Warning)

Messages

Warning 0x80047076: Data Flow Task: The output column "DateAdd" (23) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)

Warning 0x80047076: Data Flow Task: The output column "DateChg" (26) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)

... NOTE: I have removed the rest of the warnings as they were the same as above (many of them).

- Pre-execute (Error)

Messages

Error 0xc0202009: Data Flow Task: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)

Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)

Error 0xc004701a: Data Flow Task: component "Destination - Nrs_NewsArticles" (112) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)

- Executing (Success)

- Copying to [NereusV2_1].[dbo].[Nrs_NewsArticles] (Stopped)

- Post-execute (Stopped)

- Cleanup (Success)

Messages

Information 0x4004300b: Data Flow Task: "component "Destination - Nrs_NewsArticles" (112)" wrote 0 rows.
(SQL Server Import and Export Wizard)

View 1 Replies

Error Trying To Import MS Access 2003 Database Via SQL Server Import And Export Wizard - Too Many Sessions Already Active

Nov 29, 2006

I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.

I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.

Trouble is that it gets most of the way through the import until it spews forth the following error messages:

- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)

Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)

Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).

There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.

Does anyone know how I can get the import to work?

View 2 Replies View Related

Import /export DTC Licensing Error

Dec 6, 1999

hi all,
I'm trying to import export a database into another server
and i get an error:
"The license for the installation of the Microsoft SQL Server on your source and destination coonectins does not permit the use of DTS to transform data.
refer to your license agreement for more information..."

Can anyone tell me a workaround to this problem???

thank you

View 2 Replies View Related

DTS Import/Export Data Error

Jun 6, 2007

Hello everyone,

I'm having difficulties in Importing data using DTS with a SQL Query.

The Sql query :
SELECT *
FROM Organisations
where Organisations.OrganisationID = 1

I receive this Error Message :
Error Source : Microsoft OLE DB Provider for SQL Server

Error Description : Deferred prepare could not be completed.
SELECT permission denied on object 'Organisations', database 'souce_db', owner'dbo'.

Context : Error calling GetColumnInfo. Your Provider does not supprt all the interface/methods required by DTS.

Can anybody help me . Thanks

View 1 Replies View Related

Error When Using SQL Import / Export Wizard

Jul 5, 2006

I am attempting to import data from an access db using the wizard and I get the following error when the wizard attempts to save.

- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
- Saving (Error)
Messages
* Error 0xc0208220: Data Flow Task: Unable to save to XML.
(SQL Server Import and Export Wizard)

Does anyone have any ideas about how to correct this?

View 1 Replies View Related

SQL 2005 Import / Export Error 0xc0202009

Nov 16, 2007

When I attempt to import a table from another SQL 2005 server to mine, I recieve the following error:

- Pre-execute (Error)

MessagesError 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)

Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)

Error 0xc004701a: Data Flow Task: component "Destination - vwQualitySurvey" (226) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)

Is there anything that I can do to try and rectify this?

View 2 Replies View Related

SAP - SQL SERVER Import && Export Wizard Error

Nov 12, 2007

I am trying to import data from SAP through SQL SERVER Import & Export Wizard.... but its throughing following Error:
Copying to [LATPRO].[dbo].[RESB] (Error)

I went through couple of sites, as well as SQL help file and as asked increased my virtual memory still i am getting same error, does anyone know anything regarding aforesaid problem??

MessagesInformation 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)

Error 0xc02090f5: Data Flow Task: The component "Source - Query" (1) was unable to process the data.
(SQL Server Import and Export Wizard)

Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - Query" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)

Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)

View 6 Replies View Related

Error When Attempting To Use SQL Server Import And Export Wizard

Sep 18, 2006

I'm unable to use SSIS packages after installing SQL Server 2005. Specifically when I first loaded a new Integration Services project in SQL Server Business Intelligence Development Studio the default SSIS package could not load, I get Package.dtsx in my tabbed document view but in the body of this window is a error message: "Microsoft Visual Studio is unable to load this document. QI for IEnumVARIANT failed on the unmanaged server."

If I try to use the SQL Server Import and Export Wizard shortly after the window to select your data source I get a pop-up error message:

This wizard will close because it encountered the following error:

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR&EvtID=UncaughtException&LinkId=20476

------------------------------
ADDITIONAL INFORMATION:

QI for IEnumVARIANT failed on the unmanaged server. (CustomMarshalers)

Anyone have any ideas on how I can resolve this?

View 1 Replies View Related

Import Export Wizard - Syntax Error In Preview && Execution

Jan 3, 2008

Source: MS SQL Server 6.5
Destination: MS SQL Server 2005 (SP2 installed)
Suppl Ver Info: Microsoft.SqlServer.MaintenancePlanTasks.dll (ver 9.0.3043.0)

Desc:
When copying one table from source to destination (using import export wizard), the following error shows. However, when using query select * from tbl_1 can shows preview correctly. (but still need to save as SSIS, and change codepage property before it works)

===================================

The preview data could not be retrieved. (SQL Server Import and Export Wizard)

===================================

Line 1: Incorrect syntax near '['. (Microsoft OLE DB Provider for SQL Server)

------------------------------
Program Location:

at System.Data.OleDb.OleDbDataReader.ProcessResults(OleDbHResult hr)
at System.Data.OleDb.OleDbDataReader.NextResult()
at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method)
at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader()
at Microsoft.SqlServer.Dts.DtsWizard.Preview.LoadPreview()

When executing the wizard, the following error shows (the table exists, of course)

===================================

Could not connect source component.

Error 0xc0202009: Source - tbl_1[1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.

Error 0xc02020e8: Source - tbl_1[1]: Opening a rowset for "[db_1].[sch_1].[tbl_1]" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)

===================================

Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)

------------------------------
Program Location:

at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.SqlServer.Dts.DtsWizard.Execute.SetSourceConnection(Exception& ex, TransformInfo ti)

Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)

Could anybody please kindly help me on that?

View 2 Replies View Related

Import/Export Causes Fatal Error- In Server 2005 Eval. Version

Jan 27, 2006

Have the 2005 Enterprise Evaluation version. Trying to import data from a flat file to DB table. Tried running wizard from designer studio and from creating a data flow in SBIDS

Either way I am able to setup and start excution and then bombs with a fatal error.

"SQL Server Import and Export Wizard has encountered a problem and needs to close. We are sorry for the inconvenience."

Asks to Debug or close.. Tried installing on 2 other machines and having same issue. Tried several different data files and tables same issue.

Does anyone know if this is a bug? Am I missing something with permissions?

Thanks

Bill Bialas

View 1 Replies View Related

SQL Tools :: Import Export Wizard Default Data Source Causing Error / Crash

Sep 1, 2015

I have several versions of SQL Server and have been using SQL 2008 on a regular basis due to this issue. Our SQL 2014 when I do the Import Data process, it opens up the dialog window, hit next, and the data source is currently defaulting to ".NET Framework Data Provider for IBM i" - when it does this it immediately errors out with:

"An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.

Additional Information:
> Exception has been thrown by the target of an invocation (mscrolib)
>> Failed to find or load the registered .NET Framework Data Provider (System.Data)"

It immediately crashes/closes the Import/Export wizard with me unable to change the data source to what I need it to be.

My 2008 defaults to SQL Server Native Client 10.0 and does allow me to change to that same option (at which point it errors) but it does not close the wizard.

I need a way to either:

> Default the starting Data Source to be something else
> Fix whatever error is causing it to crash - I am at a loss as to what the error is looking for
> Not have the wizard crash whenever it defaults to this source.

Any of the above solutions would work fine - but at the moment I am unable to use the Import/Export wizard at all in SQL 2014.

View 3 Replies View Related

SQL Server Compact Edition Sdf As Data Source In SSIS Import And Export Wizard - Error

Jul 31, 2007

Should I be able to use a SQL Server Compact Edition sdf file as the data source for the SSIS Import and Export Wizard?

When I select the .net Framework Provider for compact Edition from the data source drop down, I get a message box with "An error occured which the SSIS Wizard was not prepared to handle. Exception has been thrown by the target of an invocation. (mscorlib) Specified method is not supported. (System.Data.SqlServerCe)"

We have a user with a sdf file that will no longer sync, so we wanted to get her data from sdf file tables into SQL Server tables quickly and easily. Since the SSIS wizard wouldn't work with the sdf data source, we copied SQL Server Mgmt Studio query results into an Excel spreadsheet via the Clipboard, them imported those records with SSIS. But we need a repeatable process in case this happens in the future.

We tried to reinitialize her merge replication subscription with SQL Server Mgmt studio, and with C# code, but none of that would work.

How many MS data provider options are available for SQL Server compact edition? I see ".Net Framework Data Provider for Microsoft SQL Server Compact Edition" in the SSIS data source drop down, but shouldn't I also see an OLE-DB Provider for SQL Server Compact Edition?

This is all on my XP workstation where I can successfully write C# code for SQL Server Compact data access with Assembly = System.Data.SqlServerCe = C:Program FilesMicrosoft Visual Studio 8Common7IDEPublicAssembliesSystem.Data.SqlServerCe.dll. So I think I have the proper tools installed.

Thanks.

View 1 Replies View Related

SQL Server Import And Export Wizard Fails To Import Data From A View To A Table

Feb 25, 2008

A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection

Operation stopped...

- Initializing Data Flow Task (Success)

- Initializing Connections (Success)

- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)

Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)

- Setting Destination Connection (Stopped)

- Validating (Stopped)

- Prepare for Execute (Stopped)

- Pre-execute (Stopped)

- Executing (Stopped)

- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)

- Post-execute (Stopped)

Does anyone encounter this problem before and know what is happening?

Thanks for kindly reply.

Best regards,
Calvin Lam

View 6 Replies View Related

Import Data From MS Access Databases To SQL Server 2000 Using The DTS Import/Export

Oct 16, 2006

I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.

Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.

Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com

View 4 Replies View Related

Import/Export Export Wizard

Oct 5, 2007

I'm trying to export data from a SQL Server 2005 database to a DB2 database through SSIS. However, I keep getting an error that says "Could not retrieve table list" with Invalid Conversion. SQLSTATE=07006. Does anybody have any ideas or what the problem could be?
-Kyle

View 7 Replies View Related

Using ADO AddNew And My Simple Trigger Won't Execute

May 8, 2006

Hi,We have been using ADO and the AddNew method for a long time as a meansto add records to the database. It has always worked fine - no problem.But - we recently started using INSERT triggers that simply call a fewstored procs (they're actually SSNS stored procs that send new eventinfo to notification services). Anyway, these triggers do not seem tofire at all! If I execute an insert command manually from QueryAnalyser, no problems. But the trigger does not fire at all from myapplication!Does anyone know why this could be? For info, my connection string usedby the ADO connection object looks like this: Provider=SQLOLEDB.1;DataSource=XXX;Initial Catalog=YYYAnd my AddRecord ADO code looks like this:With rs.Open sSQL, ConnectionString, adOpenKeyset, adLockOptimistic,adCmdTable And adExecuteNoRecords.AddNewAm I mnissing something obvious here? Any help appreciated!

View 1 Replies View Related

How To Execute A Simple Stored Procedure

Mar 24, 2008

I'm executing simple stored procedure same to:

create procedure [dbo].[usp_procedure]@var1 int=null output,@var2 varchar(25)=null output,@var3 varchar(25)=null output,@var4 varchar(25)=null output,@var5 varchar(25)=null output,@action char(1)=null outputasbegin set nocoutn on;if @action = 'S'begin select * from t_table order by @var1end

in my script I call to this stored procedure but, this send me a error. my script is
$action="S";// Set up T-SQL query.$tsql = "call dbo.usp_T_Usuarios (@action=?)";// Assign parameter values.$params = array($action);// Specify types for parameters.$stmt = sqlsrv_query( $conn, $tsql, $params);echo " Executed..... ";// Create and execute the statement. Display any errors that occur.if(!$stmt){ echo "Error executing the sp... "; die( print_r( sqlsrv_errors(), true));}else{ echo " Execute sp.... "; echo $stmt;}
and the error is:

conected...The conection was succefully.Executed.....Error executing the sp...Array ( [0] => Array ( [0] => 07009 [SQLSTATE] => 07009 [1] => 0 [code] => 0 [2] => [Microsoft][SQL Native Client]�?ndice descriptor no válido [message] => [Microsoft][SQL Native Client]�?ndice descriptor no válido ) [1] => Array ( [0] => 07009 [SQLSTATE] => 07009 [1] => 0 [code] => 0 [2] => [Microsoft][SQL Native Client]Número de parámetros no válido [message] => [Microsoft][SQL Native Client]Número de parámetros no válido ) )I need help me. some body tell me what is my error. please.

View 9 Replies View Related

DTS Export Wizard - Simple Question Driving Me Mad!

Dec 6, 2000

Where does sql server store the server names that show up in the drop down list for choosing a source or destination server?

View 3 Replies View Related

Simple Data Dump Export To Excel?

May 21, 2007

Any ideas on how to export from excel and simply get rs to do a data dump, not pull over any of the formatting, just simple columns and rows of data?

View 1 Replies View Related

Collations And Simple Import From A Csv-file

Apr 23, 2007

Hello. Here a two different problems that occur one and a while when I try to import a textfile to SQL Server 2005.

I have a flat file connection to a csv-file that originally is a export from an AS4000 DB2 database
This csv-file is defined as a variable length file
Why do SSIS automatically interpret the length of each column as varchar(50)? It does not matter if a define the same file as a fixed lenght file. The problem is that I will get a warning that information in columns will be truncated. I would like to do a direct export to the SQL Server 2005 table with shorter varchar fields. I can solve this by using the task for transforming data types but this only works on the text fields. This task cannot transform a string to a decimal or an integer column in the SQL Server 2005 table. Is there no other way than having a staging table between the text file and the SSIS-data pipe?
I also get a lot of collation or code page errors even if we set the receiving columns to nvarchar and nchar. Is there any good article on this subject? Code page errors

Last question. Is there parameter support in the data reader source connection?

I appreciate all help.

Regards

Thomas Ivarsson

View 3 Replies View Related

Simple Flat File Import

Jul 26, 2006

Boy, do I need HELP! Have a simple csv file that I need to import. Worked fine in sql2000; I put it into dts to execute on a monthly basis. Makes connection, db connection, table creation fine, but stops at validation of flat file?

Basically, I want to go out and get a flat file, drop the existing table, and create the table, and import the information from the flat file. Not a complicated table of about 30,000 records.

Create table [db].[dbo].[tblPatient] (
[patientID] into not null, [chartID] varChar(15) null, [doctorID] int null, [birthdate] datetime null, [sex] varchar(1) null, [raceID] int null, [city] varchar(100) null, [state] varchar(2) null, [zip9] varchar(9) null, [patientTypeID] int null, [patName] varchar(100) null)

Below is the error report that tells me NOTHING!

Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Error)
Messages
* Error 0xc00470fe: Data Flow Task:
The product level is insufficient for component "Source - pmPatientInfo_csv" (1).
(SQL Server Import and Export Wizard)
* Error 0xc00470fe: Data Flow Task:
The product level is insufficient for component "Data Conversion 1" (71).
(SQL Server Import and Export Wizard)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Success)
- Copying to [fhc].[dbo].[tblpatient3] (Stopped)
- Post-execute (Stopped)
- Cleanup (Stopped)

View 12 Replies View Related

Import And Export

Apr 4, 2001

Hi guys,

I need to import a database from Sybase database. Tell me the best way in solving this issue.

I had already tired using DTS package, which is not working properly, since i could not get Primary keys, foriegn keys. But i am able to get rows back. It is real pain in bud to write a script to create Primary keys and foreign keys.

Is there is any way to solve this issue.. If so, let me know ASAP.. since i have a deadline by this week end..

Please solve this issue....

Thanks folks..

urs
VJ

View 1 Replies View Related

SQl Import And Export

Apr 11, 2000

Can somebody tell me, if I want import dat from db2 on ibm mainframe, do I need a separate Odbc driver

View 2 Replies View Related

Import/Export

Dec 3, 2000

I am trying to design an import/export utility but
keep coming up against the problem of row and column delimiters.
Our data has every possible combination of delimiters in the data itself
so of course this causes the import to fail.

Basically I need a way to export and import a given table to a text file.
Is there any way to solve this without continually worrying about delimiters.

View 1 Replies View Related

DTS Import/Export

Sep 20, 2000

Q: Whenever I do import or export one database to another in SQL7, it does transfer all objects and it fails at users/permission transfer. I tried different options but the same. The odd thing when you look at the error msg every time it fails at different user.

Thanks

View 1 Replies View Related

Import Export

Feb 27, 2001

newbie...

I have a development environment and a test environment...
I would like to create a batch file of sorts in which I can backup (I would export in oracle) the development environment, objects and data, and restore (import in oracle) forced restore over the test environment. The reason for this is that we are a fast paced development team and it is important for us to update the test environment on demand. This may happen two-three times a day and the dba (me) is not always available to perform this task.

thank you,
joe

View 1 Replies View Related

Import/export

Jun 9, 2004

Can anyone tell me how can i have import/ export to/from CSV files programmatically?

Regards

View 5 Replies View Related

Import/Export

Jul 13, 2004

When I run select @@servername

I get result NULL

Actually I am trying to transfer data and tables from production server to devlopment server. When I try it I get a error 'You cannot copy objects when the source and destination databases are same'

Database Name is same but I have source & destination server is different. Is it because I have @@servername is NUll? I don't know how it became NULL. How I can change it?

Thanks in advance

View 3 Replies View Related

Import/export

Jan 21, 2004

Hello All,

I am trying to export data from a database in MS-SQL server and import the same to a database in DB2 UDb v7.2 on AIX5. While trying to do this, I am getting some errors "table name is undefined" and "drivers are not capable."

I selected the IBM DB2 ODBC DRIVER for the destination server. Am I doing any mistake....

This is being posted in both DB2 and MS-SQL sites.

Thanking you all....

...Ram

View 6 Replies View Related

Export/ Import

Jan 10, 2007

How to export records from sql server 2005 database to a notepad or to excel..?
and how to import records from SQL server 2005 to SQL server 2000.

pls anyboy can help me pls

with regards
shaji

View 4 Replies View Related

Export/import

Feb 27, 2007

What are the ways to export/import data in/out of SQL Server 2005? Iused to use DTS for 2000 to do such thing and now I can't even findthe wizard in 2005!

View 2 Replies View Related

Export And Import

Apr 25, 2008

Hi All,

How to export the tables from SQL server and import those tables in the oracle9i.
Plz any one give me the steps for this...

Thanks in Advance

View 1 Replies View Related

Import/export

Dec 23, 2005

Hey,

I've recently installed sqlServer 2005 express on my laptop so i can take some work away during christams.

What I want to do is copy a db from my work machine that is running sql2000, but i have discovered that import/export is not available in the express managment studio and that I can't connect to 2005 from enterprise manager on my work machine.

How can I copy a db Managment Studio Express???

Any advice would be much appreciated.

Tim

View 1 Replies View Related