I have a SRS report that we are using as an invoice. I want to print out terms on the backside of the 1st page. Is this possible? Any ideas on how to go about doing this? I think the best way to go about doing this is to print the whole report double sided, and leave every 'even numbered' page blank expcept page 2, where the terms would print. I'm just not sure how to go about doing this in SRS.
Any help would be appreciated.
Randy
How can I print a field that is in the dataset on each page? I added a textbox in the Page Header and use =Fields!ProjectName.value in the value property. I got an error "Fields cannot used in page header and footer."
How can I have the table header shows on each page? Currently if the data goes to the second page, there is no table header.
Thanks.
DanYeung
I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.
View 4 Replies View RelatedWhat we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
Hi.
I know the function of being able to set a section of a report to print at the bottom of the page, but does anyone know any work arounds for this? I have a main report (statement) which ive done a work around, to include the details i need at the bottom of the page into the footer, but then i have a second report (invoice) that needs to be included as subreport, which also needs infomation at the bottom of the page, but as its a subreport, sql reports does not allow for footer/header infomation in a subreport.
Unfortuantly i can not split the two reports out as they need to be printed together.
Any help/recomendations would be greatly received.
Thanks
Tom
Hi.
I wote a report including body and pagefooter, On body I put a list & the list inside had a table. Now when I print out this report, printer will printout 2 pages. (correct report is 1 page) , and on the second page, it had page footer only. If I turn off this page footer on next page, printer still
printout a blank page that's i don't need. Does anybody can help me fix this problem?
Thanks
Hi,
I need to show the logo and some other details (introduction page) when printing a report. What is the best way of doing this? I need the introduction page to be printed on a separate page followed by the report itself.
Is it possible to show the introduction page only when user prints report?
Thanks
Introduction Page
LOGO
Date Created: 7 October 2007
Total Pages: 5
Followed on a separate page by the report itself:
Candidate Name Date Joined Mentor Name
xxx yyyy 12/12/2006 mmm uuuu
cccc black 13/1/2007 john milk
Hi All,
I have a report which has four tables in it. But I have only one
Dataset. Since this dataset has more then 30 fields, I have divided
this into four tables to be shown in a report. This will help the user
to take print of the report and place each print out side by side for
view.
Showing each table in a new page is just fine. It works. But when we
take print out some times rows of second table are printed in same
page that shows rows of first table.
With this user can not put each print out side by side for view.
Is there any way to set option like print each table in new page? I
mean to say after printing first table, second table print should
start at new page.
Thanks in advance.
Hi All,
I set my report page width as 13 inch(page size=13in, 11in). Report is working correctly, It is having all the columns when I am exporting the report to PDF. But some columns are missing when I am directly printing the report. Can you please let me know how to print report with all the columns.
Thanks
I'm using SSRS SP2. I have a table with 1 group defined. I have a group footer that includes sub totals for each group. I have a table footer that includes my grand totals, but this footer will NOT print on a separate page even though I have 'Page Break At End' checked for the group. My groups correctly start on a new page, but when I get to my Grand Total footer line, it prints just after the last group sub-total line.
Any ideas what I might be doing wrong?
Thanks in advance,
Dawn J
Hi, This is because there are many columns need to display ,when users export to excel ,now they have to manually adjust the worksheet as one page(width and hight) . Therefore,as the title,can anyone help me?
View 1 Replies View RelatedI have a report that is grouped based on a field. There is no way to pre-determine the number of detail lines each group will have. Is there a way to set the print condition such that if any group details do not fit onto one page then the whole group should be printed on the next page. Something like this:
Group1
DetailLine1 -------------
DetailLine2-------------
DetailLine3------------
-
-
DetailLinen-------------
Group2
DetailLine1 -------------
DetailLine2-------------
DetailLine3------------
-
-
DetailLinen-------------
Group3
DetailLine1 -------------
DetailLine2-------------
DetailLine3------------
-
-
DetailLinen-------------
If ALL Group2 details do not fit onto the same page print it on a new page. (I don't want each group on a separate page, I just want the group detail to start on a new page IF THEY DO NOT ALL fit on one page)
Hello Microsoft or Forum Members:
This seems like a simple Microsoft Based Reporting System 101 feature...But I can not find out how to do it (among other things that seem like it should work with Microsoft rendering to Microsoft).
How do I make the SSRS 2005 Header for the Report print on each of the pages in excel once it is rendered from SSRS?
All I want is an answer by MSFT that says "YES" it can be done and how or "No" it is not currently available.
I noticed I am not the only one with this type of simple question:
(see this unanswered post)
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1281464&SiteID=1
Thank You guys!
Hi,
When I Preview my report then it's fine only 2 pages with no blank page with header in between.
I then deploy it & open via web.
But when i export to PDF & print it pints 3 pages with the first being a blank page with header.
Any Idea what I'm doing wrong?
Regards,
I have the footer with the following in it,
**********************************
= " Page " & Globals!PageNumber & " of " & Globals!TotalPages & " " & String.Format(Globals!ExecutionTime, "dd-MM-yyy uu:mm")
********************************
When i view the report it shows the page number and time, but when i print it does'nt appear at all on the print paper( page number and time)
is there a trick to make it appear on the print.
Thank you very much.
I would like to print the selection criteria on a separate page or report. I explored various forums and help facilities without luck. Any suggestions please?
Hi allI hv made a stored procedure which printsvarious messages using Print statement(shown in bold)------------------------------------------------------------------------------ .....if (@current_date<@ed) and (@current_date>@sd) begin print 'Date Lies Between Boundary Limits' select * from membership where uid=@uid end else begin if(@pipe=1) begin if(@plan_id=1) begin print 'Monthly Plan Activated' update membership set start_date=@opt_sd,end_date=DateAdd(M,1,@opt_sd),status=@opt,pipeline=0,user_option='',plan_id=null,download_limit=20 where uid=@uid select * from membership where uid=@uid end else begin print 'Weekly Plan Activated' update membership set start_date=@opt_sd,end_date=DateAdd(D,7,@opt_sd),status=@opt,pipeline=0,user_option='',plan_id=null,download_limit=10 where uid=@uid select * from membership where uid=@uid end end end --------------Now I want to retrieve the messages disp by these Print statements in my asp.net page where i m calling this stored proc.Pls suggest RegardsMunish
View 2 Replies View RelatedHi,
I'm having 2 issues on my first "real" SSRS report.
1. How to do a print preview via the preview tab. For print rendering, I have no print preview button on the preview toolbar. Is this normal? MS documention said that there is a Print Preview button. (BOL May 2007 - Designing & Creating reports -> working with report designer -> debugging and Publishing reports (Print Preview)) This report will always be rendered via the printer and it is a "pain" to have to always print it to see changes. The print layout option comes up all black with nothing viewable.
2. How do I reset page numbers back to 1 for report groups? I see no option for this. My report group requires a new page and I want page numbering to start at 1 when the grouping changes.
Note: I'm running VS2005 via Vista (with VS2005 Vista fix installed). SQL2005 SP2 also installed.
Any advice on this will be appreciated. I've spent too much time already where this should be obvious.
Hello,
I need to schedule SQL Express backup from ASP Page. I was trying to use SQLDMO to schedule jobs but found that SQL Agent is not supported in Sql Express. I tried to use Scheduler.SchedulingAgent.1 to add task in schedular but getting Invalid class string error. Schedular dll is only supported in site server. What would be the best solution for me to schedule back for SQL Express??
Hi, This is because there are many columns need to display ,when users export to excel ,now they have to manually adjust the worksheet as one page . Therefore,as the title,can anyone help me?
View 3 Replies View RelatedI have a Windows 2003 Server running IIS 6.0 and SQL Server 2005. I have just (Today) deployed the first ASP.NET application (developed in Visual Studio 2003 and, as such, dependent on .NET Framework 1.1) on this server and am getting HTTP Error 403 (You are not authorized to view this page). This ASP.NET application runs fine on another server that is configured with the OS=Windows Server 2003, IIS=6.0 but without SQL Server 2005 and without the .NET Framework version 2.0. I found in the IIS Application configuration (on the troublesome site) that my app (in the Default Web Site folder) was pointing to the version 2.0 aspnet_isapi.dll. All efforts to use aspnet_regiis to "re-align" my app with version 1.1 have been fruitless to eliminate the HTTP Error 403. I granted the NETWORK SERVICE account privledges to the wwwroot folder. At this point, I don't know if I have a Framework error or a privileges problem.
Please help.
Thanks,
Rob
I am trying to migrate from my current system, where I do merge replication from Windows Mobile devices running SQL Server CE 2.0 to a central database running SQL Server 2000 sp3a. I want eventually to move to a system running SQL Server 2005 CE replicating to a SQL Server 2005 back-end. But the transition will need to be gradual, and I may have to support both systems for a while until I can convert all clients from the old system to the new. I also need to do thorough testing.
So ... I'm trying to set up a test environment giving me the maximum possible flexibility to do my testing. Ideally, I'd like to set up SQL Server 2000 and SQL Server 2005 on a side-by-side basis, in a manner that would potentially allow mobile devices running both SQL Server CE 2.0 and SQL Server 2005 CE to sync with either back-end server.
Can someone provide me with guidance as what is possible to set up here? I know that SQL Server 2000 and 2005 can be installed side-by-side on the same server. It also appears that you can set up SQL Server 2000 so that EITHER SQL Server CE 2.0 OR SQL Server 2005 CE can sync with SQL Server 2000 (see www.microsoft.com/sql/editions/sqlmobile/connectivity-tools.mspx), but I don't know if it's possible for BOTH SQL Server CE 2.0 AND SQL Server 2005 CE to sync to the same SQL Server 2000. As for SQL Server 2005 ... it appears to be possible to set up SQL Server 2005 so that BOTH SQL Server CE 2.0 devices AND SQL Server 2005 CE devices can sync to the same SQL Server 2005 (see web page cited above). However, I don't know if it's possible to set up a SQL Server 2005 server installation in this manner while at the same time having a side-by-side SQL Server 2000 installation supporting any level of mobile merge replication.
HELP!!!!
Hello friends....
my question is as follows:
How do I send the data from the server side to the client side specifically in what format and what kind of connection do I use?
waiting for answers.....
I'm using SQL Server 2008 R2 BIDS to accomplish this.
View 7 Replies View RelatedI will soon be embarking on an upgrade of a transaction replicated database (Push) from 2005 to 2012 SP2.The publisher, distributor and subscriber are 3 separate machines.There databases will be detached, MDF and LDF will be copied across. Once attached, replication will be set up from scratch.
The name of the new servers are NOT the same as the existing ones.Should I completely remove transaction replication user the wizard and unticking the DB from being a database for transactional replication or just stop the log reader agent?How can I make sure the last of the transactions have gone across before I detach?Should I detach the subscriber first or the publication? Does it even matter?
Is there a better way of moving across the databases? I for one would have preferred to backup (.bak) then restore on the other side. I'd love to hear opinions on this as well.
I am working to create a phone list that will contain Last Name, First Name, and Phone Number sorted by last name. For printing purposes I would like to have three columns of data instead of the standard of one column.
Is it possible to create a query to present data in three columns showing the data side by side?
will this create a separate instance?
Is there anything I need to be aware of?
Thank you.
Greg
I have downloaded and installed VS C# Express Orcas beta 1. It appears that Express editons ov VS can only connect to SQL2005 Express and not to a high end edition which I have on my computer. In one of the Orcas forums, it was suggested that I can install SQL2005 Express side by side my high end SQL 2005. To play it safe, I wanted to get a confirmation from this forum before I do that. Is a side-by-side installation ok? thanks.
View 3 Replies View RelatedIs there anywhere I can compare side by side between 2005 SQL Server and 2005 SQL Server express Edition?
I just found out that the express version does not have the database Copy feature (When you right clink on the database object -> Tasks ) !
I don't know about the evel version since I have not install yet. Any idea ?
Hi all,Anyone can show me how can I catch the 'Print' statement that I have defined in my store procedure using SQL server 2000 DB on the .aspx page? ( I am using ASP.NET 1.0)My store procedure as follow:CREATE PROC NewAcctType(@acctType VARCHAR(20))ASBEGIN --checks if the new account type is already exist IF EXISTS (SELECT * FROM AcctTypeCatalog WHERE acctType = @acctType) BEGIN PRINT 'The account type is already exist' RETURN END
BEGIN TRANSACTION INSERT INTO AcctTypeCatalog (acctType) VALUES (@acctType)
--if there is an error on the insertion, rolls back the transaction; otherwise, commits the transaction IF @@error <> 0 OR @@rowcount <> 1 BEGIN ROLLBACK TRANSACTION PRINT 'Insertion failure on AcctTypeCatalog table.' RETURN END ELSE BEGIN COMMIT TRANSACTION ENDENDThanks for all your replies
I have integrated my SSRS Drill though report in Web page and i could not able to find back button to go back to the original report. Unfortunately, i am not controlling the report viewer tool bar.Do we need to write some code to get it working.
View 2 Replies View RelatedIf I download sql server 2005 express edition, will it run side by side with my sql server 2000, or is it a one or the other situation?
smtraber
Hi,
In Analysis Services there is an option to enforce a role either on the client side or the server side.
Can someone kindly guide what's the recommended approach and what's really the difference between the two options.
Thanks.