I ahve a report, that has 24 fields in the layout. When I tried to print the reprot, it prints BLANK pages, in between and at the start. I have confirmed that the width BODY of the report, < width of the report properties. It still prints blank pages.Pl advise.
View 1 RepliesHi there.
We have a report that has been working fine for almost a year and just recently we found a bug that when we print, the 1st 3 pages each have a single line from the table header and then the details of the table print.
The report table does have 2 subreports in detail rows. We have diligently checked to make sure that the sizes fit in both the main report and the subreports and we know that the report version did not change.
After a little digging we discovered that we recently patched RS to be version 9.2.3042. When we run the report on another RS server that is running 9.00.1406.00, it works fine. Do you know if this could be the cause? If so, is there another patch that addresses the issue?
Any help would be appreciated.
Thanks, Mike
Hi every one,
I am facing problem in printing the reports from browser and also when i export it to pdf,the problem i am facing is blank pages are coming when report column getting the large amount of text around 2500 characters into column value.
can any one help me in this issue?. if the report is getting acceptable amout of data it is printing in proper way i.e no balnk pages at all.i maintained all properties like margins+body size < page size.
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Thanks!
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
Submitted printed total_pages duplex
8/10/2015 8/10/2015 42 1
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
I have a report that is setup to print landscape.
I deploy to Report Manager, print it, and everything works great.
If I create a linked report from the deployed report, the linked report prints portrait.
Does anyone know of a workaround or am I just doing something wrong?
Thanks!!
BobP
We have a report that prints correctly (in landscape) in the folder that is deployed to but the linked report in a different folder prints in portrait?
can anyone shed some light on this.
I have reports, set to print on Landscape and Legal ie 14 * 8.5. However, when certain users try to print the report, it prints it in Letter, even though the report is set to print in legal /landscape.
The strange part is that for most users it prints correctly in legal, only for some it is on letter. Any idea why this would happen?
Hello,
I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you
I have a report that prints one record on a page. It also has four tables which print records from related tables. I pass it the ID of the master record an it works great.
But I need to be able to print multiple master records, ie use the same form to print more than one record from the master table. I can pass more than one ID and change the Stored proc to return more than one master record, which I believe, with the addition of a page marker, will produce a multiple form report - but what about the tables which display multiple records for each ID? Does reporting Services understand the relationship between the tables and and restrict the tables on each page to the ID?David
Hello all,
I have developed a report that when displayed in page layout view is giving me blank pages with only heaer & footer information even though none of my groups have page breaks designated. This also occurs when exported to PDF.
Can anyone provide some information on why this is occurring and how to remedy it ?
Thanks.
when I open report on report service it consist two pages, it's correct
but if I export report to pdf file I get two additional blank pages
it looks like - first correct page with data - blank page with header - second correct page with data -blank page with header
why I get two blank pages with data ?
I have a report that only has one page when previewed but when it's printed there are two pages. This is a problem because I get two printed pages to my report with "1 of 2 pages" on the first page and "2 of 2 pages" on the second but there is only data on the first page and the second has header and footer but no data.
Is there a way to force the report to fit everything on one page? Or some other setting I am missing?
Thanks.
I am having a problem with headers printing on separate pages. I have a report in RS 2000 that consists of 4 tables. Each table has several tables embedded within the table. The report has a header and each main table has two headers. The report layout is 11in. x 8.5in. with margins of 0.05in. The view space of the report is 10.2125in. Doing the math, I am withing the bounds of the paper; however, when I export to PDF, the report header and a legend table prints on the first page, the first table header prints on the second page, the second table header prints on the third page, the first data row prints on the fourth page and the rest of the table prints on the next page or several pages as needed. This repeats for the subsequent tables because I have the table property set to Insert page break after this table. I also have Repeat header rows on each page checked. I am at a loss as to why this continues to happen.
View 2 Replies View RelatedI'm not sure what is going on but I created a table in the body of a report. I have set the RepeatOnNewPage property to be true. When I preview it the header is on all pages. Perfect! However when I print preview it or export to PDF the header is on Page 1 thru 6 it skips 7 and 8 and then prints on 9. This is happening on a few of my reports.
Any suggestions?
CardGunner
Hi,
I've created a simple .rdl report and seems to show the preview under my visual studio. But, when I add the .rdl file into the server and export them to be a .PDF, The pdf is created with two blank pages for every single page with data.
Please comment me to fix this.
Thanks.
Hai,
I'm currently working in SSRS 2000. While exporting a report to PDF format, some blank pages are being added in the PDF file. Can you suggest me how to take them off. It is an urgent requirement and any feedbacks are appreciated.
Thanks in advance.
Krishna Chaitanya
I created a report with multiy pages and in between every page of data is a blank page. If the Report is Sixteen pages long i get eight blank pages. The Body size of the report is 8.5in, 25.475in. The Report porperities or 8.5 x 11in. Each page has a table with a page break at start set to true. But I still get blank pages in between the report.
View 4 Replies View RelatedI must confess it has been a long time since I have done any SSRS reporting. I have the following SQL Statement (I will change it to a stored Procedure with parameters once I get the design done):
SELECT
rc.wo_id,
rc.process_id,
rc.item_id,
rc.lot_no AS full_lot_no,
rc.oper_id, rc.seq_no,
CAST(la.attr_value AS DECIMAL(12, 2)) AS weight,
[Code] ....
This gives me the data I want which looks like this:
Rework ID Ingot Oper ID Piece Rework
28 xxxxxx14 5 M88 Route 1
55 xxxxxxx15 5 B106 Route 2
79 xxxxxxx19 5 M68 Route 3
164 xxxxxx234 5 T16 Route 4
xxxxxx234 5 B82 Route 4
The grouping is on the Rework ID. Any of the pieces can be put on any rework route. As you can see, there are 4 routes, but 5 pieces. What I need is for each rework ID to be printed on its own paper even if there is only 1 record for the route. So I would expect 4 pieces of paper, 3 with 1 record, the 4th with two pieces. Is there a setting in the Tablix or report that I can set, or is there an expression I can use?
I have a strange problem. All my report footer has 3 text boxes with the following formulea in them.
="Printed by " + User!UserID + " on " + DateTime.Now.ToString()
="Execution Time: " +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).TotalSeconds < 1, "0 seconds",
(
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Hours > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Hours & " hour(s), ", "") +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Minutes > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Minutes & " minute(s), ", "") +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Seconds > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Seconds & " second(s)", ""))
)
="Page " + Globals!PageNumber.ToString() + " of " + Globals!TotalPages.ToString()
When I run the report on the report manager, (through the site), the execution time, number of pages everything show properly. But when I print the report, the execution time and total pages is printing huge numbers, which are not in any way related the actual page numbers.
For example:
When I run the report it shows the footer like below:
Printed by xxxxxxxxx on 3/28/2008 1:59:01 PM Execution Time: 6 Seconds Page 1 of 213
When I print
Printed by xxxxxxxxx on 3/28/2008 1:59:01 PM Execution Time: 47 Seconds Page 1 of 483
Does anyone know what is the solution to this problem is?
I really appreciate your help,
Thank you,
Hi,
I am very new to SSRS. I developed a report which has two subreports in it. Blank page is generated at the end of each Page. Can any one help me how to avoid this.
Hi ,
I have developed some report in Sql Server Reporting services my Page orientation is portrait that is report height and width are 8.5 and 11 respectively and margins are set to 0.3 in when it is printed the pages are printed more that actually viewed Pages.
I need help from someone.
Thanks,
Nikhil
response2nikhil@hotmail.com
I am using a matrix control in a report containing 2 subreports. The matrix control is present in one of the subreports. When I export the full report into the PDF,if the matrix are rendered in a single page, the report is fine and there are no blank pages. But when the number of columns exceeds the first page and moves into the second page then there are 3 blank pages in the report for every page with content. The number of blank pages after each page with content is equal to the number of times the matrix would scroll into a new page.
This problem occurs only when I try to generate the whole report in PDF. No blank pages appear when I render subreports into PDFs individually.
Please help!!
HI All,
When I view my reports in PDF format, I can not view the whole report on a single page. Thats fine with me. But the problem is report is appear on every other page. not on continuous pages. How can I avoid blank pages?
Thanks
Hello,
I have a fairly large report with multiple matrix tables. They grow to a fixed width horizontally and may grow to various heights vertically. I have the interactive height set to zero so that it displays on the web page on one screen. When I go to print this report, I am getting a blank page between each page with data. Here are my dimensions:
Report:
height: 15 in
width: 8.5 in
interactive height: 0 in
interactive width: 8.5 in
left margin: .5 in
right margin: .5 in
top margin: .5 in
bottom margin: .5 in
Body:
height: 13.3875 in
width: 6.9 in
Would this problem be due to the fact that my matrix tables span an area greater than a normal page height in design mode even before they grow dynamically? Any suggestions would be appreciated.
Thanks.
Hi,
I have a master report that contains 4 sub reports. The first two subreports contains matrix controls that can (and will) spill over to a second page. With 5 columns of data the matrix subreports fit nicely onto one page, 6 or more columns and they will spill into a second page. The second two subreports will always fit onto one single page. All four subreports are inside a list control which will repeat for each structure. e.g. Each subreport will be rendered once per structure.
The master report renders perfectly (with no blank pages) whenever the two subreports with the matrix controls fit on one page each. However, whenever the matrix control subreports spill into a second page it causes the master report to insert a blank page after subreport 3 and 4, bare in mind subreport 3 and 4 both fit perfectly on a single page. I've check all margins and page widths etc.
The blank page problem only occurs whenever the matrix needs to span two pages.
Anybody encountered this problem or have any ideas how to fix it? I'm beginning to think it is a bug with reporting services.
Regards,
Adrian.
Hi,
I have report with a list and a table inside it.
I want each item of the list in a new page.
So I checked the "Insert page break after this table" of the table properties to make sure that the next table is rendered on the next page.
But printing or exporting the report, a blank page with just the header and the footer is printing.
Is there a way to remove this last extra blank page?
Thanks for your time.
Navya.
I am very new to Reporting Services. When I set the report to landscape, either by setting width and height at 11 X 8.5 when in layout, or by setting landscape in page setup when I am in preview, a blank page prints in between each report page. I've checked the forum, and tried setting margins to 0, but have not had any success. I saw this response:
the body width plus margins should be less than the defined page width. but I'm not sure what settings are being referred to
Has anyone been able to solve this problem?
Thanks very much.
Sue
Hello,
I printed Browser Report,but it is getting Blank pages in middle,
that is header part only visible for 2 pages and then data getting printed,
any ideas??
I wrote a report today containing one grouping. Everything appears all right in the report preview, except that every other page is "blank", i.e., shows only the page header and page footer; all grouping and detail information is missing.
The data on the page following the blank page seems to pick up where the previous non-blank page left off, so all information seems to be present within the report.The report width and height properties are typical portrait-style -- 8.5 x 11 inches. The columns do not "run off the edge" of the report page boundary. I haven't selected any page break for the grouping, as the grouping detail is typically only a few rows long, and would otherwise result in a very large number of pages.
Hi All
I have a report that looks and works fine in the native 'screen layout' but when I select the Print Layout option, a blank page is inserted after each page. These blank pages contain the header and footer, but not the body section of the report. Has anyone else seen this sort of thing? Is there something in my report layout causing this, or is it a bug in the Print Layout rendering?
Thanks much
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.