Printing Error

Nov 12, 2007



Hi all,
I have a web interface and using that web Interface I am viewing the report in Report Viewer.

I have tried to print that report using the Print button on the Report Viewer. If its a large report, say around 100 pages, then the report takes a lot of time to print. It keeps on showing the "Printing Now..." dialogue box on the web interface for a long time. When I checked the printer status, it keeps on showing "spooling". Because of this, the printer takes around 12-13 minutes to spool and then print.

My system configuration is 2.0 GHz processor and 1 GB Ram. Also, the report is fairly simple.

Please tell me why this could be happening. What could be wrong.

Thanks a lot in advance for all the help.

Swati

View 6 Replies


ADVERTISEMENT

I Am Getting An Error Message When I Try To Print Using Reporting Services: An Error Occurred During Printing (0x80004005)

May 22, 2007

I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"

View 4 Replies View Related

Transact SQL :: Printing Report - Capture Actual Pages In A Duplex Printing Job

Aug 10, 2015

So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:

Submitted printed total_pages duplex
8/10/2015 8/10/2015 42 1                       

This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?

View 2 Replies View Related

Landscape Printing From Report Manager Not Printing All Displayed Columns On Each Page

May 3, 2007

I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?

Thanks!

View 3 Replies View Related

#Error When Printing Report

Feb 3, 2007

I have a field on a Group Footer which is a Sum field based of an IIF statement.

Here it is.

=Sum(IIF(Fields!EXPR1.Value=2 and Fields!Type.Value=1,Fields!Quantity.Value,0))

If I do not use the AND, by by only checking on one field it works fine and it returns a result, however if I use the AND Operator I get the #Error when previewing the report.

Does anyone have any idea why this is happening. Any suggestion would help/


THanks

View 3 Replies View Related

An Error Occured During Printing. (0x800C0005)

Dec 12, 2006

We just starting receiving an error when we try to print our reports. "An error occured during printing. (0x800C0005)".

These same reports work fine on my localhost, our build server, and our beta server. This is only happening on our production server.

I have removed the activeX control and reinstalled it. It did not work.

We are ONLY running SSRS 2005. We never ran a BETA version. It was working up until recently.

Please HELP!

Thanks.

View 8 Replies View Related

Error Occured While Printing 0x80040005

Dec 5, 2007



Hi,
I have installed SQL 2000 reporting services 2000 SP2.
When i try to print report by clicking print button in HTML tool bar i get error as "Error occured while printing 0x80040005"
I have turned on client print log, but there in no useful information

Regards
Shakeela

View 3 Replies View Related

An Error Occured During Printing (0X80070003)

Jul 9, 2007

we r using the report viewer control of the reporting service 2000 , and it works fine

but when there is a huge report (around 1000 page) it gives the above error "An Error Occured During Printing (0X80070003)" after spoling of around half of the report around 500 page, and stops spoling the rest of the report

is it a problem with the reporting service or the server hardware ?

View 1 Replies View Related

SQL 2000 Reporting Services-Printing Error

Apr 12, 2007

One of the users is trying to print a report, in SQL RS 2000, He gets the foll err:



Error Loading resource String. (0*000000000)



He has a Windows 2000 professional version.



Any idea on how to fix this err? For the other users it works just fine.

View 1 Replies View Related

System Crashes While Printing A Report - Blue Screen Error

May 8, 2007

When I try to print a report ( report viewer control from ASP.NET application). The print dialog box opens, once I select the printer and click ok. It show €œprinting 1 page€? for 3-4 seconds and the System(computer)crashes and displays a blue screen error. This is happening for only two of my reports. And currently we have disabled the print button for these.

View 7 Replies View Related

Using Colors In HTML Heading And Also Printing Colors To Failure / DBCC CHECKDB Error?

Apr 14, 2015

I need to print in RED if there's atleast 1 or more consistency error and need a heading color of the table (Caption) how to do it.

DECLARE @tableHTML NVARCHAR(MAX) ;
SET @tableHTML =
N'<H1>DB Corruption Report:</H1>' +
N'<table border="1">' +
N'<tr><th>DBName</th><th>MessageText</th>' +

[code]....

View 1 Replies View Related

Printing

Jun 5, 2007

I looked through a couple of database books I have and I really didn't find anything about printing.



My question is can you print the data directly from a database in C# or do you have to write it all to a textfile then print the textfile?



Be easier just to do it from the database and eliminate the text coding, just not sure you can do that.

View 1 Replies View Related

Printing From Pocket PC

Mar 1, 2004

Hi,

I am developing an applicaiton through which, i want to print from pocket pc emulator 2003. I am using PrinterCE.NETCF SDK to do this task. I am able to print from my applicaiton like we do in ASP (Printing one line at a time). In PrinterCE, there is an option of printing the output to a file. But, I am not able to find how we do it.

So, I want to know how we can print the output through PrinterCe into a file. Can anybody help me??

thanx and regards
ramesh chandra

View 1 Replies View Related

Printing â„¢ Character

Apr 23, 2008

does anybody know why trying to print â„¢ character in 2005 does not work while same works in SQL 2000? The ascii value is 153

SELECT CHAR(153) returns ™ in sql 2000 but Ö in 2005.

View 7 Replies View Related

Printing To Txt Files

Nov 5, 2005

Hey all,
I'm new to SQL and am having some troubles w/ a problem I was given.
I have two tables (OrderTableA & OrderTableB) which are linked by an OrderID. What I need to do is have the two tables printed out to two txt files. Below is the code I have so far.

CREATE TABLE OrderTableA(
OrderIDNUMBER,
OrderDateCHAR(24),
CustomerIDCHAR(8),
TotalDEC);

CREATE TABLE OrderTableB(
OrderIDNUMBER,
QuantityNUMBER,
DiscountNUMBER,
UnitPriceDEC);

SELECT OrderID, "#" + OrderDate AS OrderDate, "&" + CustomerID AS CustomerID, Total
FROM OrderTableA;


SELECT OrderID, Quantity, Discount, UnitPrice
FROM OrderTableB;

The txt file for OrderTableA has to look like this:
!!OrderID OrderDate CustomerID Total
---------- ----------- ----------- ------
123456 #123456 &123456 123456

with the !! before OrderID in the header, the # before OrderID in the table and the & before the CustomerID in the table.

I'm not sure my code above is correct so far, and I've no idea how to print this to two txt files.

Any help would be greatly appreciated!! Thank you!

View 3 Replies View Related

SRS Printing Only One Of Two Columns

May 9, 2007

I have a report with two columns. It works fine in SQL Reporting Services, but when I push it to the Report Server it only prints one column instead of the two that it's set up to print.

What am I missing?

D-Monk

View 4 Replies View Related

Printing Problem

Oct 29, 2007

Hi i'm having a problem in printing a reporting services report. Between each page it's giving me a white paper. What can i do in order not to get the white papers anymore? Any help?

View 4 Replies View Related

Can I Force Printing?

Sep 1, 2005

I have a script or SP that takes a very long time to performmultiple tasks, and after each one there is a PRINT statementthat shows the time and what was just accomplished, to help memonitor what's happening and estimate how long it will take.In a script, I can put a GO after each PRINT to cause the outputto appear immediately, but that's not possible inside an SP.Instead, it seems the output goes to a buffer, and the bufferis only output when a PRINT causes the buffer to become full.Sometimes there is a long delay before the buffer fills. Isthere a way other than GO to cause immediate printing? (Iguess I could just use longer messages, and fill up thebuffer with every one, but that's not very elegant.)Thanks,Jim GCountrywide Home Loans

View 2 Replies View Related

Problem With Printing

Jul 25, 2007

Hi! I recently begin to use reporting tools of SLQ 2005 instead of AR or CR. I found the DUI very easy to use and I'm partially sastify beause when I try to print my report, the printer always blow out a second white page. For one page report I can live with that but for 156 page report it's becoming a lot annoing. Is there somebody who experience the same problem? And by the way resolve it?



Here the dexcription of the report:



Is a list grouped by clientId with a sub report getting the clientId from the parent one as the parameter. Event with the insert page break after list true or false the result is the same while printing.



Thx you very much



Daniel

View 4 Replies View Related

Printing Issue

Apr 24, 2008

I have created a blank report in VS 2005. I set the pagesize to 21cm x 29,7cm (A4) and margins to 1cm. Body size is 19cm x 27,7cm. I set the body border to 1pt. When I print this blank report I won't get printed as I expcted. The printed margins are very different from the margins which I set. Hos can I solve this problem?

View 1 Replies View Related

Images Does Not Appear In Printing

Oct 24, 2007



Dear All,

Kindly I need to infrom you that i make report in reporting service 2005 and there is an image in this report that i retrieve it from database

im sure that the error not in retrieveing and not the sp because that in report preview the image appear but in printing not appear

i put the some image propertise like:

mimetype:image/bmp and sizing :FitProportional

the second point :
i need to ask if can i make the report when printing can make it as default that appear in A4 not letter

I need Help as soon as possible

With my best regard

khalil hamad

View 1 Replies View Related

Printing From Web Application

Apr 10, 2007

Hi,

We are displaying the reports in Web Application using Report Viewer control.When we run the report and want to take printout we are clicking on Print button of Report Viewer then it is giving error "Unable to Load Print control" Install some activex control.

With out this error how can we print the report. How to overcome this waring.

Thanks in advance.

View 1 Replies View Related

Printing Problem

Nov 12, 2007

Hi All,


We have created reports with page size width : 11in and height : 8.5in so that we get pages printed in the landscape mode. We use HP LaserJet 3500 and reports were printing correctly in landscape format.
Everything was working fine till we introduced a new printer Dell 1110 laser printer to the environment.

When we have our Dell 1110 laser printers set as default, the page setup IS NOT set to landscape and when I manually change it to landscape, it prints in a compressed portrait image rather than landscape.

However when the HP LaserJet 3500 is set as the default, it prints correctly in landscape.

As the client is using Dell 1110 laser printers i need to fix this issue immediately.
Can someone guide me in resolving this issue..

Thanks!

View 1 Replies View Related

PRINTING REPORTS

Jun 21, 2007

Is there a way to save print settings with the report so that settings such as the size of paper (A4, legal...) and layout (landscape, portrait) do not have to be specified by user everytime she wishes to print the report?



View 5 Replies View Related

Footer Not Printing

Oct 1, 2007



Hi everyone,

For some odd reason the footer of my report never gets printed. The footer contains the page number and report name and is very important to my report. I made sure the margins are 1 inches for all sides, made sure Footers printing in first and last pages are checked in the properties section, and gave it a large amount of space around the textbox. Is there anything I am doing wrong? Also, the header and body prints correctly.

Thanks

View 8 Replies View Related

Printing Reports

Feb 6, 2007

Hi

Iam able to print only the first page in the local reports!!!

Also, can I give the user the choice of using the local version or the enterprise version of the reports?

Any suggestions plz help

Thanks

contractor

View 1 Replies View Related

Problem With Printing

Jul 10, 2007

Hello everybody,



i have used report viewer control in my win app, (c#, .net 2.0) and from msql i get data, fill necessary tableadapters and print report. Everything works fine on my computer, i generate report from template, push Print button in report viewer, Print dialog appears and i print the report by clicking OK.



The problem occurs in another computer, where i launch my app, i generate report, push Print button, and when appears print dialog happen strange things:



1. In print dialog i push "Print" button once, and nothing happens, Print dialog is still on top, then i push second time Print and then i can see that to pages is sended to printer (but my report is only one page). Printer does nothing, in printer schedulles there is no jobs.



2. So i press Print button in report viewer second time, Print dialog appears again, i click Print button nothing happens, then i push second time Print button i can see that 1 page is sended to printer, Print dialog disapear and now printer print my report correctly.



and this mesh is everytime i generate report and want to print it. Printer is installed correctly, i tried newest drivers for it. For example with ms office word everything works fine.



Could it be report viewer bug? what are the ways to find out what is wrong?

View 4 Replies View Related

Problems Printing

Apr 11, 2008



I have a problem when i print reports.

I have a parameter that change font type.

I select Agfa Rotis Sans Serif and the report change the text with that font. I can see that in my navigator.

If i print the report with ie (File/print) the report is print ok.

If i print the report using the reporting services print button the report is not print with that font.

The font is install in the server and in the client.

That ocurrs only in some machines and i don't know why.

At first, that font was not installed in the server and occurs the same. In some machines the print were ok and in some machines don't.

I don't understand anything. If the problem is in the server configuration i don't understand why there are machines that print correctly the font and if the problem is in the client neither cause all machines have that font installed and in some machines is print ok and in other not.

Any ideas?

View 1 Replies View Related

Printing A Database Diagram

Dec 6, 2007

All --
Please help.
I am having trouble printing a database diagram.
When I do, I get junk artifacts on the page on each table, shaded areas that obscure part of the picture.
I get these results when I print with Adobe Acrobat 8 Standard and when I print to my HP4200N laser printer.
Is there a required driver or something?
Please advise.
(I apologize but this is the only good place I could find for this post-- if you have any hints for other locations then please post links.)
Thank you.
-- Mark Kamoski

View 29 Replies View Related

Printing A Database To A Printer

Apr 12, 2001

Greetings,

1. I would like to print one of my database to a printer, how can I do that?
2. I would like to transfer one of my database to Microsoft Excel 97/2000, how can I do that?

Thank you very much.

View 6 Replies View Related

Printing Out Table Structures......

Nov 15, 2000

I have a SQL 7 database with about 30 tables in. For documentation purposes I need to print out the structures of each table. I have tried using the diagram tools but no joy.

I have access to Access, Crystal Reports, if these are any use?

Please help!!

Tony Kavanagh

View 3 Replies View Related

Printing SQL Server Users

Sep 25, 1998

How would one go about printing a list of all of the users of a specific database?

View 1 Replies View Related

Printing Stored Procedure

Jun 12, 2001

Is there an easy way to printout the stored prcedures? Here is what I want, I have a list of various sproc's that I have created. I would like to print a list of them that includes the SQL statements, not just the name of the SP's. Does anyone know of an easy way of doing this without cut and paste?

Thanks!

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved