Hi,
I need to create address labels from report builder. I can create the same from report designer using list box and text boxes. But not able to create the same from report builder as it is supporting only one layout - table (Columnar) for table type. Can any one help me to place the filelds in row wise rather than column wise.
Hi,
We are having trouble getting labels to print correctly when there is a lot of data close together on the labels. These are more than just address labels, so there are many lines, graphics, and borders. Are there additional tools or suggestions for keeping labels consistant?
Thanks
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
Submitted printed total_pages duplex
8/10/2015 8/10/2015 42 1
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Thanks!
Hi,
When i select datasource in Report Builder, i am able to see all the available DataSources.
Eg: I have selected one datasource from the list and which has 3 tables(table1, table2, table3) associated to that datasource.
when i drag and drop table1 fields to report, i am not able to see the other 2 tables(table2 & table3)
Is there any property or relationship do i need to maintain?
Thanks,
SR.
I have 6 separate mailing label like reports with a textbox inside a cell. I tried to join them into one report with subreports"but" it does not work since you need the print layout in order to get both columns to show. What is the best way to accomplish this task?
View 5 Replies View RelatedHi,
It appears to work fine on my end however on my clients end, whenever they try to print a report that displays perfectly within the report viewer to their printer by selecting the printer button in the report it never ends up printing.., however if they go into printer setup and change the page range to print from all pages to just maybe one page and then select the print button it seems to print fine..
The printer seems to receive the information as the light flashes but no page kick out when all pages is selected to print..
Any help would be greatly appreciated..
I developed a rdlc report. I have a graph chart. Sometimes the value of a label can =0. If the value =0 I want to hide the labelname. However, I also have dummy values =0. This is so that I can have spaces between the bars. The dummy values labels isn't shown in the graph. This works great. I need to add to the expression that if the name of the label isn't dummy but the value =0 to hide the labelname.
The data from sql:
Expression in graph under chart data->category groups->category group properties->label:
=Microsoft.VisualBasic.Interaction.SWITCH(Fields!LabelName.Value = "aTotalForRetire", "Retirement", Fields!LabelName.Value = "cTotalForRelatives", "Relatives", Fields!LabelName.Value = "eTotalForDisability",
"Disability")
The result is below. I want to hide the label relatives as in this example the value=0. It will not always be the case. How can I do that?
Data lables in ssrs reports are getting overlapped in stacked chart. Since it is satcked chart i can't place labels outside the bar.Due to this it is not visible clearly. how to avoid this issue?
View 7 Replies View RelatedI just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies View RelatedAfter I use the report builder to create a generic report, how do I actually get that report into the report designer so that I can modify it more effectivly?
The issue that I have now is that the file on the report server is not a .rdl file and if I simply save it as one and then bring it into VS to modify it the code file is a html structure rater than a XML file type.
Any suggestions would be appreciated. Thanks
Hi All
I have a reporting viewer in a windows form that behaves very strange. When I open the form and run the report it shows up nicely in the report viewer. If I print the report it only prints one page. When i print the report a second time the whole report is printed. Next I'll change the report parameters and run the report, then it shows up nicely in the viewer, but when I print the report the first report is printed.
Does anyone know what to do with this problem?
Thanks in advance
I've created a linked server with a pretty basic Excel spreadsheet, and used this command to create a linked server to it:
sp_addlinkedserver ''XL_SPS_1', 'Excel', 'Microsoft.Jet.OLEDB.4.0', 'c:MyExcel.xls', null, 'Excel 8.0'
I want to use this as the data from which to build a report model. As linked servers don't show up in the Data Source View wizard, I created a view in SQL Server:
create view MyExcel
as
select * from XL_SPS_1...Sheet1$
Okay, great, now the view shows up in the DSV wizard and I can create the data source view. However, when I create a new report model based on this data source view, the Report Model Wizard tells me at "Create entities for all tables" that I've got an error when it processes dbo_MyExcel that "Table does not have a primary key."
I assume this is where the identifying attributes for the entities in the report model are taken from, so I really can't go further. Does anyone have an idea as to how to add a primary key to a linked server (Excel) in SQL 2005? Can this be done? Other than importing spreadsheet data to a SQL table, how can I get around this?
Thanks,
--Stan
We have a remote business client who has a proxy server setup and this translates into receiving a 407 proxy authentication blocking error when attempting to download the report builder application for deployment off the report server which is housed locally with us. The proxy server does not allow them to download application type files off another site. At the moment, they would not like to disable the proxy for these users to allow them to deploy the application on their client or add the report server as a trusted site. Is there a method by which Report Builder can be locally installed on the client pc instead of online only with it knowing the correct report server to access and then still launch correctly when the report builder button is pressed through report manager?
I am not a web application guru by any means and we have tried to replicate the oneclick deployment and what occurs in the local settings/apps/2.0 subdirectories, but the application still attempts to download/install again. If we attempt to just launch the local executable on the client, report builder assumes the client pc (localhost) is the report server to access. Is there a method which will succeed?
Hi,
I am unable to launch report builder from the report manager from a client machine. But I am able to launch from the localhost.
Even I am able to launch report builder by clicking reportbuilder.exe on the local machine.
Please help !!
OS - Windows XP professional
SQL Reporting Services 2005.
hi
I have installed SQL Server Reporting Service on window xp. everything working fine except one thing.
I have installed sql server with my a/c. my a/c have admin rights. when i giving http://dineshpatel/reports it is displaying page but Report Builder and other option are not displaying. I hope i don't have admin rights.
I have checked with local administrator login also but same problem.
what additional setting are require for admin rights?
Dinesh Patel
I have a report builder drill down report. I have row groups with totals. It looks like the attached. The problem is when the report is not expanded the Grand Totals column is not accurate... it is displaying the totals of one of the rows when expanded.The expression in the Total Show text box is
= Switch (
MID(Fields!protocol_id.Value,1,7)="THERAPY",
Sum(IIF(Fields!status.Value = "CO", CDbl(Fields!TX_CO.Value), Nothing)),
MID(Fields!protocol_id.Value,1,7) = "GENERAL" and MID(Fields!program_id.Value,1,6)
= "INTAKE", Sum(IIF(Fields!status.Value = "CO",
[code]...
Is there any way to not display the expression in the Total columns unless the report is expanded?
HI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Thanks
Jack
I have provided required permissions, still user not able to view report builder option in his console.
what could be wrong? what needs to be done to provide report builder to users.
Deleep P
I have client machine in one domain, say A domain , on which I have installed .net 2.0 without any problem. I have report server running in other domain (B domain) where I have deployed few models which will be used from domain A to create ad hoc reports by launching Report Builder. I can access other reports in domain B from A
But when I click on Report Builder ..it tries to connect to server in domain B but fails to connect and shows following log in a text pop up
I know, problem is because of cross domain communication but question is then how to fix it ? what changes I need to do for that in firewall, domain etc etc settings?
Here is the error, I have highlighted lines which might give some clue:
------------------------------------------------------------------------------------------
PLATFORM VERSION INFO
Windows : 5.2.3790.65536 (Win32NT)
Common Language Runtime : 2.0.50727.42
System.Deployment.dll : 2.0.50727.42 (RTM.050727-4200)
mscorwks.dll : 2.0.50727.42 (RTM.050727-4200)
dfdll.dll : 2.0.50727.42 (RTM.050727-4200)
dfshim.dll : 2.0.50727.42 (RTM.050727-4200)
SOURCES
Deployment url : http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application resulted in exception. Following failure messages were detected:
+ Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed.
+ The remote server returned an error: (500) Internal Server Error.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [12/19/2006 6:49:58 AM] : Activation of http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [12/19/2006 6:50:14 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
- Downloading http://192.168.1.197/ReportServer/ReportBuilder/ReportBuilder.application did not succeed.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Net.WebException
- The remote server returned an error: (500) Internal Server Error.
- Source: System
- Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
I was wondering if there was any way to add a value field to a report, with the time it took for the report to Process.
It would probably be a text field with an Expression, but don't know how that would go.
I know that in Expression there is a value for ExecutionTime (when report began to run), but nothing about when it ends.Can this be done? and if yes, how?
Is there a way to see Report-Level variables in Report Builder 3.0? Also, just as a feedback, it would be really nice if there were a way to see and easily access all of the variables used in a report from one location instead of going to the dataset, the report, and then to the individual groups (if needed) to see the variables. Also, it would be very useful if Group-level variables can show up in the Expression Builder as well.
View 2 Replies View RelatedI've gotten to the point of publishing the new reports on the SSRS server and have run into the following problem.
I use a field in the primary report with the "Go to report" action to open up another report (also published) for more details. It works properly from within ReportBuilder (2.0) using the report server and I can go to and from the secondary report as I expect. Its passing the correct parameters to the second report and its runs.
But when I use the reports from the SSRS web, the Go To link no longer works. Mouse hover shows its still a link but clicking goes no where. I can run both reports independently from SSRS and they still work.
I've tried this in IE and Chrome with no luck in either. I also poked around at Compatability view and popup blocker but nothing made any difference.
I am setting up the SQL2005 reporting service to let users build their own reports on the web. I'll provide them with pre-built report models. We have concern with SQL database performance by allowing users to execute huge reports. The problem that I have is: If I give the users permissions to build report they'll have access to the report's Properties | Execution page, which allows them to disable the report execution timeout. Is there a way for me to allow them build reports while restrict them to access the report execution timeout settings?
Please advise. Many thanks.
Hi,
I've created dsv that contain all fields from table database. in the smdl I've remove some fileds due to security. All fields in the smdl do not contain drill.
Issue: When I created calculated field in the report builder the field has a link. When I clicked the drill I saw all the record data including field that not in the smdl.
Questions:
1) Can I remove the link from the calculated fields?
2) Can I prevent from users drill to fields that not in the smdl?
Thanks,
Assaf
Hi,
I have environment that use SSRS 2005 ad hoc reporting.
One of the users (out of 200) is unable to open or save reports in the report builder.
the user succeed to open the report builder, when he try to save report that he build from shema he get error. as well when he try to open an existing report that build in the report builder he also get an error,
On open the error is:
The numeric portion of 2pt cannot be parsed as a unit of the type point.
The Initilizer for 'Microsoft.ReportingServices.Design.Constants' threw an exception
On Save the error is:
System.IO.StreamReader: Deserialization failed: The type initializer for 'Microsoft.ReportingServices.Design.Constants' threw an exception. Line 2, position 2
Please note that I succeed with second user to create ad hoc report on the first user
computer. I also failed to with the first user to create ad hoc on another computer.
It seems like permissions issue
Thanks,
Assaf
Is it possible to dynamically refresh the report model of the report builder?
could it even be using code with any of the interfaces?
When we add a table or add a column to the table in database , will the report model get refreshed automatically or do we need to do it externally. If so, can we use any of the objects and write a custom code in VB.
Using the report builder, I created a simple report based on a report model. This report runs ok in the report builder.
I proceeded to save the report to the report server, but when I want to view this report in Report Manager, I get the following error:
An error has occurred during report processing.
Query execution failed for data set 'dataSet'.
Incorrect syntax near '<'. The label 'xmlns' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xmlns' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xmlns' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xsi' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xsi' has already been declared. Label names must be unique within a query batch or stored procedure. The label 'xsi' has already been declared. Label names must be unique within a query batch or stored procedure.
Hi
I am working on Report builder project and was wondering if somone can help me with below questions
Is it possible to convert RDL files built in report designer to Report Builde RDL file? if yes then is there any tool or we will have to do it manually. I have also seen that there is no SQL in RDL files created in Report Builder.
If above is not possible then my second question is if we can only copy the layout but as we have got 1000 RDL files in built by report desinger how can we automatically convert this into layout in Report Builder.
Does Microsoft has any specific tools for this?
Will highly appreciate for any help on above.
Thanks
M
I would like to automate a report using Report Builder 3.0. I have limited access to the Reporting Services, so I would like to create a task on my workstation to automatically run the report by clicking one button.
View 6 Replies View RelatedHi,
Is anyone using Report Builder via a Report Model generated from Analysis Services in production?
From what I have seen on the Forum people have done this from books, but it is not clear as to whether they have used it at work, in production. There do appear to be reports of some problems with the integration between the two, and with performance.
The attraction of Report Builder on top of Analysis Services is that we should only need to define measures, security, etc, once in the Cube, not twice, as we would if we had to use Report Builder on top of a relational source, alongside Cubes on Analysis Services.
What I would like to find out is:
1) If there is someone who has deployed Report Builder on top of both a relational data source and Analysis Services. If so, which has been taken up best by the users?
2) How does the navigation in Report Builder work with Cubes. It seems a little bizarre in that you can only drill down, never up. Is there any way around this. Do you need to design the Cube specifically to support the Report Model? If so how?
3) The generation of the report model is easy. However, is there any way to control this, or to edit it later?
4) We have had problems with Report Models on relational sources where changes have invalidated the Report Model and all reports built on it. Can similar problems arise, for example, if you change the Cube and then Re-Generate the Report Model?
5) Are there any other issues around Report Builder. The two I have found so far seem to be Hidden Dimensions showing up, and Report Builder not working if measures are defined as non-aggregatable.
6) Are there any other end-user adhoc reporting products which work better with Analysis Services?
Regards
Paul
I have created couple report through report builder which using AS cube as the data source. Every time when I try to access the New Subscription from the web UI. It complains about "Subscriptions cannot be created because the cedentals used to run the report are not stored, or if a linked report, the link is no longer valid.".
So I went into "Properties" -> "Data Source" and use the custom data source. I've selected "Microsoft SQL Server Analysis Services" and put in the following Data Source=SQLTEST;Initial Catalog="Data Warehouse AS". I've select "Crednetials stored securely in the report server", using my Windows login and password.. and I've got the following error.
"
An error has occurred during report processing.
Query execution failed for data set 'dataSet'.
The SemanticQuery element at line 7, column 351 (namespace http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling) cannot appear under Envelope/Body/Execute/Command. "
Please help!!!
I deployed the same report model to 2 different SSRS servers. The report only has 1 field with count of records from 1 table. I can drill down on this column on 1 server, but not on the other server. This column is set to drillabe on the report model.
Is there any SSRS configuration that is stopping me drilling down on it?