Prints Everything Big In Direct Printing
Apr 10, 2007
I am using SQL RS 2005 with VS2005 in Windows Application. I have placed Report Viewer on Windows From and then report is attached with it. Now report previews well in BIDS as well as in VS2005. Moreover it exports perfectly to pdf and excel but when I click print button on report viewer and give direct print to printer, font size, textbox, rectangle and every other thing become large, like instead of 10 font size, it prints 12, instead of 240 width of rectangle, it prints 280 or so.
There must be some solution to this thing. Some one help
View 3 Replies
ADVERTISEMENT
Aug 10, 2015
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
Submitted printed total_pages duplex
8/10/2015 8/10/2015 42 1
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
View 2 Replies
View Related
May 3, 2007
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Thanks!
View 3 Replies
View Related
Oct 20, 2006
I'm trying to use the PRINT statement to trace what an SP is doing, while
running in QA.
However, some PRINTs seem not to print anything. I can see that the
code part is being executed.
Any ideas? (It's just simple prints like print 'executing an insert' .)
View 5 Replies
View Related
Apr 29, 2008
In my SQL2005 SSRS table, I have formatted the numbers to be C0 (currency, 0 decimal places). The numbers display like this: Even the fomat expression builder shows an R in its example!
R 456,220
In the same report, a table immediately above it that I created yesterday is formatted the same way but displays with the correct formatting:
$456,220
What did I do? Thanks!
View 7 Replies
View Related
Jan 26, 2007
Hi,
I have several reports out of which only one report is acting weirdly.
The report displays fine when I open it up but when I try to print it,
it only prints the first page. I tried exporting it to PDF and the same
thing, the PDF has only one page. I tried exporting in all formats and
found that PDF and TIF are not working but the other formats (web
archive, HTML, XML and CSV) are fine. The excel format gives me this
error:
Exception of type
Microsoft.ReportingServices.ReportRendering.ReportRenderingException
was thrown. (rrRenderingError) Get Online Help
Exception of type
Microsoft.ReportingServices.ReportRendering.ReportRenderingException
was thrown.
Index was out of range. Must be non-negative and less than the size of
the collection. Parameter name: index
I need the PDF format to work. Any ideas why this particular report is
bad? Another note of interest. This report uses only a subreport that works
fine in another report. Please help.
Thanks,
Anand
View 1 Replies
View Related
Jul 11, 2007
I am getting an error "An error occured during printing (0x80004005)" - when i am trying to print - and the i still am able to print - but only 1 page.
Thre registry key - Reporting services was not there - so i created it at
[HKEY_CURRENT_USERSoftwareMicrosoftMicrosoft SQL Server80Reporting Services]
"LogRSClientPrintInfo"=dword:00000001
Please help - what should i do now ?
View 4 Replies
View Related
Jul 20, 2005
My code prints out 0 for the value of charindex ( 'Hello.', '.' ).Did I miss something? I think it should print out 6!
View 1 Replies
View Related
Aug 8, 2007
Hello, I have a report that looks fine in preview, but when put to PDF or printed contains gaps at the right and bottom.
Here is a picture of the problem: http://northeasttigers.webng.com/pdfproblem.jpg
My tables are the same width as the body, 15.5cm, and the report width is 21cm. Also adding the bottom table's top location attribute to it's height gives the same height as the body.
Any help much appreciated.
Greg
View 4 Replies
View Related
Apr 28, 2008
All of my reports that are formatted 11x8.5 are outputting to PDF correctly. When I open the PDF in Adobe Acrobat, it appears in Landscape on the screen. However, when I click the print button, by default it is printing it in portrait. I can go to File-->Print Setup and change the orientation from Portrait to Landscape, but why doesn't it translate from the file orientation? This may just be a bug in the Adobe Acrobat software, but I want to make sure there isn't something I can do.
Thanks.
View 1 Replies
View Related
Nov 12, 2007
I am very new to Reporting Services. When I set the report to landscape, either by setting width and height at 11 X 8.5 when in layout, or by setting landscape in page setup when I am in preview, a blank page prints in between each report page. I've checked the forum, and tried setting margins to 0, but have not had any success. I saw this response:
the body width plus margins should be less than the defined page width. but I'm not sure what settings are being referred to
Has anyone been able to solve this problem?
Thanks very much.
Sue
View 3 Replies
View Related
Aug 27, 2007
hi guys help please. I have a column name Quantity of type int in my table table1 and it has an intial value say 5. My question is, is it posible to update that column say, i want to add 10 from its initial value for it to have a value of 15, without querying it first from my application and store it to a varibale and add 10 to it for it to have 15 and execute update to set the initial to new value (15).
View 6 Replies
View Related
Dec 4, 2007
I did a little bit of looking in the forums for something like this, but I wasn't able to find anything. In essence, I am looking to create a web form in ASP.NET which will emulate the SQL Server Query Analyzer Tool... eventually what I'd like to see:
- A dropdown of different connection strings, to connect to different databases
-A multi-line textbox where a user could type in a query (be it a SELECT, CREATE, UPDATE, or multiple queries at once)
-A gridview object for results
-A multiline textbox to contain server output ("the command completed successfully", "xxx rows returned", "syntax at line 3 not recognized", etc)
I can do the first 3 without any difficulty, but I have absolutely no idea where to start with the server output. Anyone have any ideas? It does not need to be secure, as the only databases they'll have access to will be "test" databases and the pages will not be publicly hosted (LAN only)
View 2 Replies
View Related
Jan 3, 2008
Hi,
There are certian "routine things" that need to be queried in my database. Currently we can either do:
1) SELECT * FROM myTable WHERE id = x
OR
2) We can use a stored procedure to do the above SQL for us...That way, if the table changes, or we make changes to the database etc. The calling code will remain unchanged and we just have to change the stored procedure code instead of anywhere that calls it.
What would you say are any disadvantages of doing the 2nd approach?
Thanks!
View 14 Replies
View Related
May 12, 2008
hi all,
I am using SQL reporting services 2005, i like to have a parameter as optional, is there is any diresct way to set a parameter as optional without setting through the default value.
View 6 Replies
View Related
Jul 24, 2007
Hi
I have found article by Jamie T. (www.sqlis.com/26.aspx) where he explains how to use direct configuration.
I followed every step.
Before building project I made sure that CreateDeploymentUtility = True.
Once project was built I have copied files from Deployment folder to other PC to c:PackageConfiguration (I have 3 files there: environment.dtsconfig, PersonAge.dtsx and jamie.SSISDeploymentManifest)
dtsConfig file is;
<?xml version="1.0" ?>
- <DTSConfiguration>
- <DTSConfigurationHeading>
<DTSConfigurationFileInfo GeneratedBy="me" GeneratedFromPackageName="PersonAge" GeneratedFromPackageID="{2612ABDA-E4FB-43DF-A1C1-44066426A798}" GeneratedDate="7/24/2007 9:46:41 AM" />
</DTSConfigurationHeading>
- <Configuration ConfiguredType="Property" Path="Package.Connections[Destination].Properties[InitialCatalog]" ValueType="String">
<ConfiguredValue>DataStore</ConfiguredValue>
</Configuration>
- <Configuration ConfiguredType="Property" Path="Package.Connections[Destination].Properties[ServerName]" ValueType="String">
<ConfiguredValue>MyPCsql2k5local</ConfiguredValue>
</Configuration>
</DTSConfiguration>
However, I am doing something wrong as I was not able to deploy this to another PC.
I double click Manifest file and in Configuration Package - Property there are two entries: InitailCatalog and ServerName. Initial Catalog has Value=DataStore and ServerName = MyPCsql2k5local. I change ServerName to be AlexPcSQL2k5Local.
I have Validate Package after instalation so I get error saying that connection to Destination failed.
If I go to File System to installed package and say Run, package will run OK if I change all ConnectionManagers to point to AlexPcSQL2k5Local
What is it that I am doing wrong?
View 7 Replies
View Related
Jul 12, 2007
Hi There,
I have recently upgraded to report Server 2005. I used to have a webpage that loaded a number of reports into different frames to give real time statistics for an IT Service Desk.
In the new version if try and link directly to the report (By right clicking a report and taking the link) the report loads with out any of the toolbars etc at the top as i need it, however it does not refresh and seem to be cached data.
Has anyone got any ideas how to resolve this problem, in short all I need is a way to directly view the report losing all the toolbars etc on the top and just displaying the data.
This has been driving me mad so if anyone could help i would be really grateful!
Many thanks
Gerard
View 1 Replies
View Related
Aug 3, 2004
Hi
I have a SQL 2000 table in which pictures are stored as an Image column. I want to display then onto a c# aspx webpage without storing them to disk.
What is the best way to read and display the pictures?
In classic ASP I used to do this:
Response.ContentType = "image/jpeg"
Response.BinaryWrite rs.fields("ThisImage")
but I can't get this to work in c#.
View 2 Replies
View Related
Oct 8, 2007
ok i need to know the difference between inner outer , left , right joins ....
anyone know any good tutorials ?
View 3 Replies
View Related
Dec 11, 2007
I have a table from 1.5 million records.
A valued-table function with the parameters used in a SELECT.
1) If I use:
DECLARE @Par1 int
SET @Par1 = 28338;
SELECT Count (*) FROM MyTableValuedFunction (@Par1)
Running time: 2.3 min.
2) If instead:
SELECT Count (*) FROM MyTableValuedFunction (28338)
Running time: 0.02 sec.
Why?
The two solutions are not identical?
View 5 Replies
View Related
Sep 29, 2006
If your XML configuration files will be in the same location on your Development, UAT and PROD servers, is there any merit to making your configurations indirect?
I am modifying the connection string with the XML. My strategy is to set up an XML configuration for each database that we have. The Dev XML config will point to Development connection, UAT to UAT etc..
My thought is that by using the direct configuration it will eliminate the need for environment variables and also allow me to add configs without having to reboot the servers, which you would need to do in order to get server to recongize the EV.
Thanks
View 5 Replies
View Related
May 3, 2006
I have taken over the support over a database in sql 2000 that has 10+ remote users that synchronise each day. However it also has 30+ users who are directly updating the data in the live database on the server.
One of these users is entering data directly upon the database on the server but the new rows are being placed in the conflict table somehow!!
Does anybody have any ideas about how this could be happening ?
Is it ok to have users directly updating on the server and users synchronising ?
I would appreciate any help!!
Thanks.
View 1 Replies
View Related
Aug 29, 2007
Is there a way to use trusted connections in ASP.NET and WinForm applications yet prevent users from accessing databases directly (outside of applications) ? I know the use of trusted connections are recommended for several reasons however I have a lot of applications that I need to prevent users from accessing databases directly outside of the applications themselves.
View 5 Replies
View Related
Dec 8, 2007
Hello. Does anybody knows if the are shortcuts to differrent menu items in Sql 2005 Management Studio ?For example i will to use the "Execute " button without need to use the mouse, as this case as of others.Any knows where can i find a map or a page info with the shortcuts of SQL2005 Management Studio ? Thanks
View 1 Replies
View Related
May 17, 2006
I'm just starting out here.
I created a simple formview connected to a local file copy of the database by adding the database into the project. It worked fine.
However, I noticed that this copy of the database was not synch'ing with the database with the same name in SQL express. So I created a new connections string to access the SQL database directly out of SQL express. Its just a simple Select * from column. However, this gives an error. Why?
Server Error in '/NETCatMgr' Application.
The data types ntext and nvarchar are incompatible in the equal to operator.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: The data types ntext and nvarchar are incompatible in the equal to operator.
This is the connection string
<add name="CatalogMgrConnectionString" connectionString="Data Source=mymachinesqlexpress;Initial Catalog=CatalogSQL;Integrated Security=True"
providerName="System.Data.SqlClient" />
Doesn't make sense. How can the formview work fine with the SQL integrated into the project but not working with a connection string to the SQL Express proper???
View 2 Replies
View Related
Aug 17, 2001
In SQL7 Query Analyzer we want the results of a SELECT statement not to be displayed on screen but written to a text file.
We assume that in the tons of sp_ and SET statements there should exist
one where output file can be defined.
Greetings from Mannheim, Germany
Ricardo
View 1 Replies
View Related
Jul 20, 2007
In 2000 there was a server level setting you could change in EM, to allow direct modifications to systems catalogs.
in 2005 I would like to update some sids in sysusers tables, do I also need to find and set this option first
View 6 Replies
View Related
Oct 21, 2015
Is there a way to setup a trace to show only direct TSQL statements triggered on my server? note I don't want to capture Procedure calls or the statements called within the procs.
Actually many people are firing direct SQL statements on server. And some are coming from entity framework as well. I just want to capture those.
View 1 Replies
View Related
Jul 23, 2005
From what I've read in the docs, ado.net currently supports opening sqlserver ce tables in table-direct mode and performing Seek operations on them(using SqlCeDataReader), but not on the full-blown sql server. Is this(will this be) still true with ado.net 2.0 & sql server 2005?
View 11 Replies
View Related
Sep 23, 2006
hi,
There is no direct equivalent to Oracle's rownum or row id in SQL Server
there is any possiblity are alternate thing is exist then please reply
regards
santosh
View 10 Replies
View Related
Nov 16, 2006
Hello,
I need some clarification. I am trying to utilize the XML Direct Configuration in my SSIS packages to utilize database connections in the package. I am wanting to utilize this the same way you could use UDLs in the SQL Server 2000 DTS packages.
Currently, I am creating the dtsConfig file and saving it to my desktop. I then modify it with notepad and add the following configuration where it looks like this:
<DTSConfiguration>
<Configuration ConfiguredType="Property" Path="Package.Connections[ConnectionName].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Data Source=[ServerName];Initial Catalog=[DBName];Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;</ConfiguredValue>
</Configuration>
</DTSConfiguration>
Once this is created, I am trying to "re-use" this in SSIS packages created moving forward, where they all point to this configuration for the same database connection.
What I don't understand is when "Enabling Package Configuration" and then pointing to this dtsConfig file doesn't create a connection in "Connection Manager" NOR does it provide a way to create a blank connection and point to this configuration.
I feel like I am missing something thats so "great" about XML configuration files. Any help would be appreciated.
Thanks,
Daniel Lackey
MCSD
View 3 Replies
View Related
May 16, 2007
Is it possible to to render direct to PDF when viewing the report url?
View 7 Replies
View Related
Feb 14, 2008
Hi,
We have few reports which users want to export rather than see them on the web. Is there any way to directly export the report (in a specified format say .CSV) when user clicks on generate report. This way they don't have to wait till report is rendered on the web page and then export it.
View 3 Replies
View Related
