I have set up a locahost site in IIS using the "Configure Web Synchronization Wizard". One of the first test I was asked to do was to open a broweser and browse to http://localhost/MobileTest/sqlcesa30.dll
If all is well I should get a web page with the following line:
SQL Server Mobile Server Agent 3.0
But unfortunately I get an error stating : "The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance."
I checekd the Event log and found this error related the IIS launch process on my machine.
DCOM got error "Logon failure: unknown user name or bad password. " and was unable to logon .IWAM_Rataq in order to run the server:
where Rataq is the name of my machine. Could my IWAM_Rataq account be corrupted, my other sites on the machine work.
Infact if i put in a Test.htm page in the virtual directory MobileTest I am able to browse to the page.
Can the Account be re-set? is there another problem that I am not aware of. I have Norton Internet 2006 running could that be the reason? Could Norton be blocking the dll from loading? But the event log states it is a Account error.
Any ideas why this might occur? any help is always appreciated
when I run a package from a command window using dtexec, the job immediately says success. DTExec: The package execution returned DTSER_SUCCESS (0). Started: 3:37:41 PM Finished: 3:37:43 PM Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
We just moved source server to newer, bigger box ... Windows 2003 and Active Directory ... Snapshot agent worked but distribution failed ... Same login as on older machine, login is sysadm, used DCOMCNFG to allow ability to launch process ... What are we missing?
I would appreciate any help here at all. I am pulling my hair out!
I am unable to start the snapshot agent or log reader agent from within SQL management studio. it fails on executing step 2 with unknown username or bad password.
I have checked all account details and they are correctly using my domain admin account. I can connect to SQL using teh same account and it also has sysadmin permissions.
If i copy the step 2 paramters and start from the cmd prompt (again logged in using the same domain account) they both start fine.
I am testing peer to peer replication in our environment. I simulated a three node peer to peer topology and a local distributor.
For some wierd reason I cannot get the Log Reader Agent and snapshot agent to start. The domain account under which SQL Server Agent runs has administrator previlage on the box. I also use a domain account for SQL Server Service. (none of the passwords changed).
This is the error I am getting - "Executed as user: abc. A required privilege is not held by the client. The step failed"
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration. Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"... The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195 System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95 System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105 System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497 System.Web.UI.Control.InitRecursive(Control namingContainer) +321 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
While I was out of the office the Lan Team moved one of my SQL Server2000 servers to a new network domain. Since then the maintenance jobhas not ran.The error log for the SQL Agents has the message listed in the subjectline. I have not found any useful articles on the MS SQL Serversite. Anyone know what might be wrong and how to fix it.HTH -- Mark D Powell --
Hi. I have installed an SQL 2005 Failover Cluster on a Two Node Active Passive Windows 2003 Cluster.If i am trying to failover from the Active node to the passive Node,The Sql Server,Sql Server Agent and SQL Analysis resources fail,However if i reset the passowrd in the services tab of the above three services on the pasive node,the resources come online. Below is the brief of my setup 1.I have two Active directory domain controllers running Windows 2003 R2 Standard edition with SP2. 2.i have installed a Windows 2003 Two Node Active Passive Cluster as NODE1 and NODE2. 3.The Domain account used to install WIndows 2003 A/P Cluster is Clusteradmin.This account is the member of Administartors on the Domain as well as the Local Admin on NODE1 and NODE2. 4.SQL 2005 with SP2 is installed on both the Nodes as SQL 2005 Failover Cluster.The account used to install SQL 2005 is sqadmin.This account is the member of Administartors on the domain and the member of Local Admins on NODE1 and NODE2. 5.SLQ 2005 has four domain groups for 4 SQL Services.The Services are SQL Server,SQL Server Agent,SLQ Anaylisis Server and Full text Search. 6.Each of these servcie has a seperate service account created for them.All these service accounts areb the members of domain admin and the member of Local Admin on NODE1 and NODE2. 7.Each of these servcies is running under these servcie accounts in the Servcies tab in NODE1 and NODE2. 8.If i fail the resources from NODE1 to NODE2 ,The SQL Server,SQL Server Agent and SQL Anaylisis resources are failing.on going to the service tab of NODE 2 I reset the password for these services,the services come online. 10.The Cluster resources and MSDTC Resources are Failing over successfully.They are coming online successfully. 11,I have a problem with the SQL Server Resources,even if i failback to NODE1 from NODE2,the same resources are failing again.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
Is there a difference with sql replication between sql server 2005 64bit and sql server 2005 32bit? Both are on a Windows 2003 server. One is 32 bit and the other one is 64 bit. The first time I set up sql replication (test environment), it was on a 32 bit sql server. This worked fine. The second time I wanted to set up replication (live environment), it was on a 64 bit sql server. This didn't worked fine.
I can't call the sqlcesa30.dll file on the 64bit server with IIS. So I called the dll via a remote IIS server. This worked but gave me the following error when calling the following URL: http://domain/PDASYNC/sqlcesa30.dll?diag
SQL Server Mobile Server Agent Diagnostics 2007/07/31 14:26:55
General Information
Item Value
Server Name domain
URL /PDASYNC/sqlcesa30.dll
Authentication Type Anonymous
Server Port 80
HTTPS off
Server Software Microsoft-IIS/6.0
Replication Allowed
RDA Allowed
Logging Level 0
Impersonation and Access Tests
Action Status ErrorCode
Impersonate User SUCCESS 0x0
ReadWriteDeleteMessageFile FAILURE 80070003
SQL Server Mobile Modules Test
Module Status ErrorCode Version
SQLCERP30.DLL SUCCESS 0x0 3.0.5207.0
SQLCESA30.DLL SUCCESS 0x0 Unknown
Reconciler Test
Reconciler Status ErrorCode
9.0 Database Reconciler SUCCESS 0x0
8.0 Database Reconciler FAILURE 0x8007007E
SQL Server Module Versions
Module Version
sqloledb.dll 2000.86.1830.0
9.0 replrec.dll 2005.90.2047.0
9.0 replprov.dll 2005.90.2047.0
9.0 msgprox.dll 2005.90.2047.0
8.0 replrec.dll 2000.80.760.0
8.0 replprov.dll 2000.80.760.0
8.0 msgprox.dll 2000.80.760.0
After seeing this I looked up what ReadWriteDeleteMessageFile could mean. It appeared to be some NTFS acces problem. But when I checked the security settings, it all seemed to be ok.
Has anyone any idea what else to check? Or is sure that I must have done something wrong?
Sql server agent is running under a domain account that is a member of administrators and domain users amongst others, and the package is executed as the service account. Connecting to servers on the same domain works and when I run it from the msdb package store in ssis (ssis runs under the network service account ...) it will connect to the pop server as well. Permissions, fiddly proxies .. the answer's out there somewhere
The SQL Server Agent (MSSQLSERVER) service on server started and then stopped. If i Manually start the services also SQL Server Agent services are stopping automatically.Though I selected Auto Restart SQL Server Agent if it stops unexpectedly, The services are stopping automatically.TCP/IP protocol was enabled for port 1433.Are there any setup I missed?
I am trying to connect to a sql server 2005 server using either windows auth or sql server auth but I can not. When I click on the connect button to connect to a server it never connects. I can not cancel once I press connect. It never times out after I press connect. I removed all registered servers that were registered previously. I have uninstalled all software that involved sql server (and sql2000) run a registry cleaner(not microsofts), installed the software to a new directory and still I can not connect to the sql2005 server (the only db).
Any ideas?
I am running Windows XP with latest services packs for both windows and sql server. I have visual studio 2005 installed on my machine and I have had sql express installed on it previously.
I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this I use Microsoft Windows Vista Home Professional I have already installed to my computer Microsoft SQL Server 2005 and SQL Serves Express. I used to be successful to connect to the SQL Server but now I CAN NOT.
Not: I try to run SQL Server 2005 but I can not, even I logged on to my computer with an administrator rights. On the other hand I can start and stop the SQL Server Express easily.
As a result, how can I solve this problem. Thanks in advance. Bilgin Kılıç Additional Details
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I'm about to go absolutely nuts. I've tried so many things including:
1) Of course making sure Remote connections and both TCP/IP and named pipes are enabled for SQL 2005 2) Verified my connection string works. I even tested it in Enterprise Library using the tool and it connects successfully via windows authentication 3) Made sure of course my logged in user is a member of the administrator group and that my user in SQL 2005 logins has db_owner and full rights to the DB I am connecting to. I also made sure the NT AUTHORITY as well as the 3 sql service users have db_owner rights as well as the adminstrator in the SQL Server logins all have db_owner to the DB 4) Started the SQL Server Browser service, SQL Server DB engine, and SQL Server Agent 5) Made sure my site is setup right in IIS 7. I checked the connection string in there as well as it shows up in IIS7 in one of the sections. Using Windows authentication and it is enabled for my site 6) Tried running the .net site using both localhost (IIS) and also tried using the Visual Studio built-in web server. Both give this message still
Error Details:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.SessionState.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo) +79
Hello everyone !!! I need to do a process that run every day to update some data, but my sql server version (express 2005) does not have job agent service. Does anyone can give me a suggestion of what to do? Thank you!
Hi there, was wondering if any can tell me why the following jobs keeps failing: INSERT INTO TblActivityBookingArchive SELECT * FROM TblActivityBooking WHERE (expiryDate <= GETDATE()) it retuens that it is successful when there is no data to archive from TblActivityBooking, it's when there is data to archive that it returns that the job has failed. Hope you can help Thanks Mel
I am unable to start SQL Server Agent. When I try, I get this message: "An Error 1053 - (The service did not respond to the stort or control request in a timely fashion) occurred while performing this service operation on the SqlServerAgent service."
Is it possible to schedule a job to automatically send e-mails based on criteria in a database table, maybe using CDONTS? I don't want to use SQLMail, since my administrator has not set that up. Also, I don't want to write the code in an ASP page for the following reason: If the page is not being viewed at the time I want the e-mail to be sent, it won't work. Besides, it's not efficient to have to read this code for no reason every time a page is loaded in the hopes someone loads it at the correct time. Any suggestions?
We received the error messages below (in the SQLAgent Log) when trying to execute a SQL Job manually. These errors do not appear if the job is executed automatically, and consequently runs smoothly. Only when we try to kick off the job manually does it fail and report these errors.
3/20/01 4:27:16 AM - ! [000] Password verification of the 'SQLAgentCmdExec' proxy account failed (reason: A required privilege is not held by the client) 3/20/01 4:27:16 AM - ! [000] Password verification of the 'SQLAgentCmdExec' proxy account failed (reason: A required privilege is not held by the client)
If anyone has any insight into this issue it would be greatly appreciated.
My sql server agent is not starting and whenever I try to start a job it gives me an error saying that job csnnot be started as sql server agent is not running...and it open a black window(with title bar d:mssql7insqlagent.exe)..can anyone tell me the reason for that and how do I get around this problem.
Attempted to start the SQL Server Agent in Services and got this error message: 'Error 2140: An Internal Windows NT error occured'. Does anyone know what I need to do or fix? Any help would be greatly appreciated. Thanks.
Need immediate help trying to figure this message out. We are having immediate problems trying to start the SQLServer Agent, the service that runs the Scheduled Tasks and needs to be reset if NT connectivity has been interrupted to keep SQL Mail on-line, is not responding and generating the following message. All DBAs that might know something about this problem, would you please respond immediately. We can't have our SQL Server Agent down and not responding.
[000] Password verification of the 'SQLAgentCmdExec' proxy account failed (reason: Logon failure: the user has not been granted the requested logon type at this computer)
Thanks for all your help and solutions in getting to an answer. Sincerely, Daimon Russell
In SQL Server 2000, how can I set up SQL Server Agent to automatically start up when SQL Server starts up ? I do NOT want these to start up when the OS starts (so setting them to automatic in Control Panel Services is no good). When I shut down SQL Server the SQL Server Agent does automatically shut down too but I cannot get it to start up.
I am running 3 instances of SQL2000 SP3a on a windows 2000 server. Over the weekend, the server was restarted due to security patches being applied. All 3 instances are setup the same (Automatically start SQL Server Agent when restarting server). The 2 named instances started the agent fine but the default instance did not. There are no errors in the log. When I started it manually this morning, it started fine with no errors. Does anyone have any idea why the agent would not have started automatically?
I need to take the databases offline and stop the SQL Server Agent. If I stop the SQL Server Agent first, will I be able to take the databases offline?
I want to sendmail after finishing job by using SQl Server Agent.When I try to change SQL Server Agent start up account from new account in windowsxp system , I give new account a right of 'Log oOn as a Service Right ',but I experience the error the following. Error 22042 xp_setsqlsecurity() returned error- 2147023564 'No mapping between account name and security IDs was done'
