Problem Summarizing Data
Nov 2, 2007
Hello,
I'm not a very strong SQL coder. I am having a problem regarding summarizing some data. I am hoping somebody can provide me with some direction.
I have two tables. One table represents a ticket: Ticket (ID, DateSold). Another table represents the status of a ticket: TicketStatus (ID, TicketID, StatusID) I need to create a query that can tell me how many tickets were sold in each month. But then, I need to be able to break that monthly ticket total down by StatusID. I have the following SQL Statement:
SELECT
Count(1) as 'TicketCount',
Month(DateSold) as 'SellMonth'
FROM
Ticket t
GROUP BY
Month(DateSold)
Which works up to the first part of the problem. However, how do I get the number sold per each status? Essentially, I would like my result set to look like the following (pipe-delimited):
TicketCount | SellMonth | Status1Total | Status2Total
5 | 1 | 2 | 3
9 | 2 | 8 | 1
7 | 3 | 3 | 4
Can somebody please help? Thank you!
View 7 Replies
ADVERTISEMENT
May 26, 2008
Hi,
I'm new to SQL and I will appreciate your help, my knowledge only goes so far and I think this task is above my skills. I'm trying to get information form a table in a certain format that allows me to summarize data on an hourly basis but I think I need need to use DATEPART.
The table looks like this:
Group Date_changed Object Proc Idx Value Offset
295 2008-05-19 00:05:00.000OBJ_1 PRC11020008544
295 2008-05-19 00:05:00.000OBJ_1 PRC11130006860
295 2008-05-19 00:05:00.000OBJ_1 PRC11240001372
295 2008-05-19 00:05:00.000OBJ_2 PRC11010002058
295 2008-05-19 00:05:00.000OBJ_2 PRC11120002744
295 2008-05-19 00:05:00.000OBJ_2 PRC11230003430
295 2008-05-19 00:05:00.000OBJ_3 PRC11070004116
295 2008-05-19 00:05:00.000OBJ_3 PRC111 60004102
295 2008-05-19 00:05:00.000OBJ_3 PRC112 50004802
295 2008-05-19 00:10:00.000OBJ_1 PRC11025004602
295 2008-05-19 00:10:00.000OBJ_1 PRC11135004502
295 2008-05-19 00:10:00.000OBJ_1 PRC11245005481
295 2008-05-19 00:10:00.000OBJ_2 PRC110 12005482
295 2008-05-19 00:10:00.000OBJ_2 PRC111 22005483
295 2008-05-19 00:10:00.000OBJ_2 PRC11232005484
295 2008-05-19 00:10:00.000OBJ_3 PRC11074506174
295 2008-05-19 00:10:00.000OBJ_3 PRC111 64506175
295 2008-05-19 00:10:00.000OBJ_3 PRC112 54506176
...
...
...
it contains data on 5 minutes intervals for each object and index.
I'm trying to summarize the data by Idx, I used this query:
select datepart(hour,date_changed) as Hour, Object,avg(Value) as Avg_Idx_10
from table1
where group = 295 and idx = 10 and Object = 'OBJ_1'
and datetime_changed < '2008-05-20'
group by datepart(hour,datetime_changed), Object
Hour Object Avg_Idx_10
0 OBJ_16346
1 OBJ_15039
2 OBJ_14533
3 OBJ_15102
4 OBJ_19019
5 OBJ_123511
6 OBJ_152575
...
...
...
And I get the information I need but each query shows only the data for 1 Idx, what I was wondering is if I can create a query that will allow me to summarize data on average Idx for all the idx in just 1 row yo obtain an output like this:
Hour Object Idx_10_Avg Idx_11_Avg Idx_12_Avg
0 OBJ_1 7500 3200 9500
0 OBJ_2 8400 7600 5800
0 OBJ_3 4700 6500 3400
...
...
...
Again, I'll appreciate any help, thanks in advance.
View 8 Replies
View Related
Mar 7, 2008
Hi there,
I'm faced with a bit of an issue within SSIS and I was wondering if anyone could help. I have data that looks like the following:
TABLE 1:::
CustomerID StaffID Percentage
A123 1234 1
A124 1245 1
A125 1234 0.7
A125 1443 0.3
B117 6653 1
B154 8899 1
C776 1443 0.2
C776 1337 0.6
C776 1245 0.2
I need to be able to summarize the data above and build up a string that should look like the following:
TABLE 2:::
CustomerID StringID
A123 1234||1
A124 1245||1
A125 1234||0.7||1443||0.3
B117 6653||1
B154 8899||1
C776 1443||0.2||1337||0.6||1245||0.2
As you can see in Table 1, if a CustomerID has only one StaffID associated to it, the "Percentage" Column's value is 1. In the cases where there is more than one StaffID associated to a particular CustomerID, the percentage column get's split up among the StaffIDs, however the sum of this split can never exceed 1 (100%) per CustomerID.
I need to know how to find the cases where there is more than one StaffID associated to a CustomerID, group the CustomerIDs, and build a string made up with the StaffID and Percentages as shown in Table 2.
Any help would be greatly appreciated, as I've struggled with this one for a while and have hit a brick wall.
Ciao,
Colin
View 6 Replies
View Related
Nov 20, 2015
I have a table (edw_sbx_bt.jjenkins_OVERAGE2) of 40,000 MA_NUM. Â
I want to find occurrences of those specific MA_NUM in another table (edw_ar_fl.ARTBASE) with specific attributes (CONTRACT_NUM = '593' and TRANSACT_STATUS_CD = 'D'). Â
When I run the query below it returns 4 million rows. Â How can I write a query that will return the 40,000 MA_NUM (in edw_sbx_bt.jjenkins_OVERAGE2) with the sum total of MA_PAID_AMT associated with each?
SELECT edw_ar_fl.ARTBASE.MA_NUM,
    edw_ar_fl.ARTBASE.MA_PAID_AMT
FROM Â edw_ar_fl.ARTBASE
    JOIN edw_sbx_bt.jjenkins_OVERAGE2
     ON edw_ar_fl.ARTBASE.MA_NUM = edw_sbx_bt.jjenkins_OVERAGE2.MA_NUM
WHERE Â edw_ar_fl.ARTBASE.CONTRACT_NUM = '593'
    AND edw_ar_fl.ARTBASE.TRANSACT_STATUS_CD = '
View 4 Replies
View Related
Oct 27, 2015
I have two tables one list changes of hospital ward and one lists changes of consultant doctor. These can change independently ie a ward change can occur without a consultant change and vice versa. I want to summarise these changes to give the status at each date_serial value.
create table #temp_ward_stay(date_serial bigint,ward_id varchar(10))
;
insert into #temp_ward_stay
values
(201501021200,'W1'),(201501031201,'W2'),(201501091200,'W3'),(201501161200,'W4'),(201501161201,'W5')(201501271200,'W3'),(201502101200,'W5')
;
create table #temp_consultant_episode(
date_serial bigint,
consultant_id varchar(10))
;
insert into #temp_consultant_episode values
(201501021200,'C1'),(201501031200,'C2'),(201501031201,'C3'),(201501091201,'C4'),
(201501121200,'C3'),(201501301200,'C6'),(201502111200,'C6'),(201502111201,'C7')
;
If I use:
select date_serial,consultant_id,null as ward_id from #temp_consultant_episode
union
select date_serial,null as consultant_id,ward_id from #temp_ward_stay
I get:
date_serial ward_id consultant_id
-------------------- ---------- -------------
201501021200 NULL C1
201501021200 W1 NULL
201501031200 NULL C2
201501031201 NULL C3
201501031201 W2 NULL
201501091200 W3 NULL
201501091201 NULL C4
201501121200 NULL C3
201501161200 W4 NULL
[code].....
whereas what I actually want is:
date_serialward_idconsultant_id
201501021200W1C1
201501031200W1C2
201501031201W2C3
201501091200W3C3
201501091201W3C4
201501121200W3C3
201501161200W4C3
201501161201W5C3
[code].....
I can see how I could remove the nulls where the date_serial values are the same:
select ce.date_serial,ward_id,consultant_id from #temp_consultant_episode ce
join #temp_ward_stay ws
on ce.date_serial=ws.date_serial
but I can't see how to move forward from here.
View 9 Replies
View Related
Apr 17, 2015
LOCALID - POSTCODE - GPCODE
PTO1395164 - DN34 1AB - G9999981
PTO1395164 - DN34 1AB - G9999981
PTO1395164 - DN34 1AB - G8909058
PTO1395164 - DN34 1AB - G8909058
PTO1395164 - DN34 1AB - G8909058
PTO1395164 - DN34 1AB - G8909058
PTO1395164 - DN34 1AB - G8909058
PTO1395164 - DN34 1AB - G8909058
PTO1395164 - DN34 1AB - G8909058
PTO1395164 - DN34 1AB - G8909058
PTO1395164 - TZ14 2AX - G8909058
PTO1395164 - TZ14 2AX - G8909058
The sample data above shows 1 customer with multiple episodes (different attend dates – not important here), during the course of these attendances they moved home and moved GP practice.
Is there a simple way in Access to show a summary of this eh PTO1395164 = 2 postcodes, 2 GP’s
THe ultimate aim would be to identify where a customer has changed postcode or GP within a selected timeframe and disregard the rest.
View 4 Replies
View Related
Nov 24, 2006
Hi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Dec 14, 2005
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
View 4 Replies
View Related
Dec 4, 2007
I have used both data readers and data adapters(with datasets) in the projects that I have worked on. I am trying to get some clarification on when I should be using which one. I think I am doing this correctly but I want to be sure I am developing good habits.
As the name might suggest, it seems like a datareader is for only reading data. I have read that the data adapter and dataset are for a disconnected architecture. Or, that they can be used for this type of set up. I have been using the data adapter and datasets when writing to a database and the datareader when reading from a database.
Is this how these should be used? Is the data reader the best choice for reading data? Am I doing this the optimal way from a performance stand point?
......................................................thanks in advance
View 1 Replies
View Related
Nov 2, 2015
We already integrated different client data to MDS with MS Excel plugin, now we want to push back updated or new added record to source database. is it possible do using MDS? Do we have any background sync process to which automatically sync data to and from subscriber and MDS?
View 4 Replies
View Related
Oct 18, 2006
When I enter over 4000 chars in any ntext field in my SQL Server 2005 database (directly in the database and through the application) I get an error saying that the data could not be updated because string or binary data would be truncated.Has anyone ever seen this? I cannot figure out what is causing it, ntext should be able to hold a lot more data that this...
View 7 Replies
View Related
Aug 12, 2015
I have a requirement to implement CDC for 50+ tables to implement incremental data changes warehouse/reporting rather than exporting the whole table data. The largest table is having more than half a billion records.
The warehouse use a daily copy of OLTP db (daily DB refresh). How can I accomplish this. Is there a downside in implementing CDC just for the sake of taking incremental changes on the tables?
Is there any performance impact if we enable CDC on OLTP db?
Can we make use of the CDC tables on the environment we do daily db refresh so that the queries don't hit OLTP database?
What is the best way to implement CDC to take incremental changes for reporting.
View 0 Replies
View Related
Jul 20, 2005
Hi,This is driving me nuts, I have a table that stores notes regarding anoperation in an IMAGE data type field in MS SQL Server 2000.I can read and write no problem using Access using the StrConv function andI can Update the field correctly in T-SQL using:DECLARE @ptrval varbinary(16)SELECT @ptrval = TEXTPTR(BITS_data)FROM mytable_BINARY WHERE ID = 'RB215'WRITETEXT OPERATION_BINARY.BITS @ptrval 'My notes for this operation'However, I just can not seem to be able to convert back to text theinformation once it is stored using T-SQL.My selects keep returning bin data.How to do this! Thanks for your help.SD
View 1 Replies
View Related
Nov 10, 2015
I'm using Script Component to load data into Oracle DB due to the poor performance issue. Now, I found it will missing some data during the transmission. Please see the screenshot below:Â
SQL Server：
Oracle:
DDL:
create table Person
(
BusinessEntityID Integer,
FirstName nvarchar2(50),
MiddleName nvarchar2(50),
LastName nvarchar2(50)
);
Result:
I follow up this article:Â [URL] ....
VB Script:Â
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
[Code] ..........
View 8 Replies
View Related
Apr 16, 2008
Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
View 13 Replies
View Related
Jul 24, 2015
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
View 10 Replies
View Related
Feb 5, 2007
is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.
I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?
I expect to set up a username for each database as i setup new customers.
View 1 Replies
View Related
Feb 23, 2008
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
View 3 Replies
View Related
Sep 28, 2015
I setup this package to import data from a Sharepoint list to a SQL Server data table. The primary key of my SQL table is mapped to the Title column of my Sharepoint list. There is a possibility that duplicate values will be entered in the Title field of the Sharepoint list. So when importing data into my table via SSIS, my package always error-out when there it comes across duplicate values. how you others have managed data integrity when importing from a Sharepoint list with the Title column being mapped to the primary key of a table.
View 4 Replies
View Related
Feb 12, 2008
Hello,
I am wondering what conversion rules apply, when a string, which contains a number, is saved to a SQL Server 2005 into a column of type decimal.
This is the code I€™m using (C++):
CString cValue = "0.75"
_variant_t vtFieldValue;
vtFieldValue = _variant_t(cValue)
pRecordSet->Fields->Item["MyColumn"]->Value = vtFieldValue;
"pRecordSet" is an ADO recordset. The database column "MyColumn" is of type "decimal(19,10)".
The most important question for me is, if the regional settings of the database server or the regional settings of the client PC are considered during the conversion from the string to the decimal value. For example in standard French regional settings the "." would not be recognized as decimal separator.
I am also wondering if the language of the database instance, in which this data is saved, is considered during this conversion or any other settings of this database instance.
So my general question is: Does anybody know exactly what rules apply during the above mentioned conversion?
Thank you for your help.
Regards,
Volker
View 2 Replies
View Related
Oct 12, 2015
I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?
View 6 Replies
View Related
Jun 13, 2006
Hi everyone,
I have to extract, dayly a list of contacts on a exchange server in a table on our EDW on sql server 2005. Is it possible to get the information directly from a dataflow or i will have to developpe a script task ?
Need help desperatly !!!
View 3 Replies
View Related
Apr 22, 2015
I am getting ErrorCode 8 while loading the data from stage to model. I have checked my error view it states that "Member Code is Inactive".
Initially I have loaded same set of data in Model from MDS Stage table but then deleted with ImportType = 5 which removed all the data from the MDM model.
Now i want to load it back but its giving the Error Code 8 .. Before loading the same data i have changed the stage table Importtype to 2 and Importstatusid to 0.
View 6 Replies
View Related
Jun 19, 2007
Hello,
I have noticed that for one of my data-flows, the process is really long during the phase "the final commit data insertion has started".
To be accurate, the process is fast until it reaches this phase. It happens often when I load millions of lines.
The extraction is done from a database SQL Server 2005 to a database SQL Server 2005, on the same server (with the SQL Server native provider).
I used a SQL Server destination but I have tried with an OLE DB destination and it is the same situation.
Why the process could be so long during this phase?
There is a way to optimised my package to avoid that?
Any idea is welcome.
Thanks.
Guillaume
View 6 Replies
View Related
Nov 1, 2006
HiI'm having problems following the tutorial on creating a data access layer - http://www.asp.net/learn/dataaccess/tutorial01cs.aspx?tabid=63 - when I try to compile in Visual Studio 2005 I get namespace could not be found. I followed exactly the tutorial - I created a dataset and added this code in my aspx page. <asp:GridView ID="GridView1" runat="server" CssClass="DataWebControlStyle"> <HeaderStyle CssClass="HeaderStyle" /> <AlternatingRowStyle CssClass="AlternatingRowStyle" />In my C# file I added these lines... using NorthwindTableAdapters; <<<<<this is the problem - where does this come from? protected void Page_Load(object sender, EventArgs e) { ProductsTableAdapter productsAdapter = new ProductsTableAdapter(); GridView1.DataSource = productsAdapter.GetProducts(); GridView1.DataBind(); }Thanks in advance
View 6 Replies
View Related
Jun 11, 2007
My vendor requires data to be sent in Excel format. Some of my tables have rows over 65,536 so I need to use Excel 2007 (Max of 1,048,576). Right now my data sits in SQL 2000. I am using MS SQL Enterprise Manager 8.0 to prepare the data. Is there some kind of add on or selection I am missing to use DTS to export from SQL to Excel 2007?Thanks in advance.
View 3 Replies
View Related
May 7, 2014
I think I am definitely thrashing and am not getting anywhere on something I think should be pretty simple to accomplish: I need to pull the total amounts for compartments with different products which are under the same manifest and the same document number conditionally based on if the document types are "Starting" or "Ending" but the values come from the "Adjust" records.
So here is the DDL, sample data, and the ideal return rows
CREATE TABLE #InvLogData
(
Id BIGINT, --is actually an identity column
Manifest_Id BIGINT,
Doc_Num BIGINT,
Doc_Type CHAR(1), -- S = Starting, E = Ending, A = Adjust
Compart_Id TINYINT,
[Code] ....
I have tried a combination of the below statements but I keep coming back to not being able to actually grab the correct rows.
SELECT DISTINCT(column X)
FROM #InvLogData
GROUP BY X
HAVING COUNT(DISTINCT X) > 1
One further minor problem: I need to make this a set-based solution. This table grows by a couple hundred thousand rows a week, a co-worker suggested using a <shudder/> cursor to do the work but it would never be performant.
View 9 Replies
View Related
Jan 12, 2015
Was wondering if there was a best practice minimum permissions for creating a SQL login to use when setting up a new shared Data source for SSRS report manager?
Something along the lines of them being a data read for the DB and permissions to update tempdb?
Would have thought it not advisable to have the login be able to update the main db...
View 1 Replies
View Related
Sep 4, 2015
I need to create a function that replaces the data in a column with an 'X' based on the LEN of the data in the column. I created one that does a replacement, but it fills the column based on the max data length, and not the current length of the string or integer. An example of what I'm trying to accomplish.
Original data in a varchar(30) column:
thisisavalue
thisisanothervalue
thisisanothervalueagain
shortval
replaced with
xxxxxxxxxx
xxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
xxxxxxx
My current function is replacing the data like this:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
View 4 Replies
View Related
Jul 20, 2005
Hello all. Before my arrival at my current employer, our consultantsphysically set up our MSSQL 7 server as follows:drive c: contains the mssql enginedrive d: contains the transaction logdrive e: contains the data filesNo filegroups were set up and the data files consist of only 1 largephysical file. Currently, our data file is >10GB. When I was trained onthe physical aspects of sqlserver, I was told to never create physical files[color=blue]> 2048MB each. If I did, I could expect inefficient physical storage of[/color]data and slower performance (due to the OS).Our server has 2 RAID-5 arrays. Drive c: and e: are located on the firstarray and drive d: on the second. We're running Windows 4.0 NT Server SP6with NTFS.Can someone comment on the use of 1 single large data file vs. more smallerdata files?
View 2 Replies
View Related
Jun 11, 2015
I am trying to find a reference for a client that lists the fields available to be substituted into a data driven subscription from the query, along with the expected data types.  For example, the field on whether or not to include a link to the report seems to be expecting a bit data type.I have searched and can't seem to find anything.  I guess I could walk through the interface and try different data types, but if  a list exists, that would be better.Â
View 4 Replies
View Related
Apr 23, 2015
I'm currently working on a BI architecture for a customer, and consider to propose the Power BI data catalog as a data distribution layer. The customer will use Power BI, but also has other BI tools.
Are data sets in the data catalog available to other clients than Power Query alone? E.g. are there OData feed endpoints available? If not, what would be the best way to give other tools access to the data?
View 3 Replies
View Related
Jul 10, 2015
I have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values"  for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the  outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
View 3 Replies
View Related
