I have a SSIS package running and tested fine on my desktop. However when I deploy the package to my server I get the error given below.
SSIS package "CR Sec Watch List 2.dtsx" starting.
Information: 0x4001100A at Transform Master Files: Starting distributed transaction for this container.
Information: 0x4004300A at Transform Master Files, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Transform Master Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Transform Master Files, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Transform Master Files, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Transform Master Files, Excel Source [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
Error: 0xC0208265 at Transform Master Files, Excel Source [1]: Failed to retrieve long data for column "NKoreaPoi".
Error: 0xC020901C at Transform Master Files, Excel Source [1]: There was an error with output "Excel Source Output" (9) on component "Excel Source" (1). The column status returned was: "DBSTATUS_UNAVAILABLE".
Error: 0xC0209029 at Transform Master Files, Excel Source [1]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output "Excel Source Output" (9)" failed because error code 0xC0209071 occurred, and the error row disposition on "component "Excel Source" (1)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047038 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Excel Source" (1) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Transform Master Files, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Transform Master Files, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Transform Master Files, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Transform Master Files, DTS.Pipeline: "component "SQL Server Destination" (20)" wrote 0 rows.
Task failed: Transform Master Files
Information: 0x4001100C at Transform Master Files: Aborting the current distributed transaction.
Warning: 0x80019002 at Process Master Files: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (8) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CR Sec Watch List 2.dtsx" finished: Success
For some reason it tells me that it not able to retrive the long data for a column. The column mentioned in the error contains special characters.
Once again, there seems to be no problem with the package as the package runs fine on my desktop.
Any help or clues as to why this is happening on my server is greatly appreciated.
Does anyone know why SSIS sometimes just sits in the Pre-Execute phase of a data flow and does nothing? It doesn't matter how elaborate the data flow is or the volume of data. It can sometimes take 80% of the task's run time.
I have a SSIS package which pumps data from one server to other without any additional steps. There are 11 tables for which data is transferred. And this packages runs fine on two different environments but fails in one environment i.e. on SIT.
It doesn't throw any error and every time stops at the below step
[DTS.Pipeline] Information: Pre-Execute phase is beginning.
I have a monster SQL query (SQL Server connection) that I'm trying to export to flat file. My package appears to just stick on the "Pre-Execute phase is beginning" stage. (I left it running overnight, and it's still going... no error message, I think it's just hung. If I include a "Top 10" in the my source query it completes without a problem. I'm wondering if it's an out-of-memory issue, but when I've run into this in the past there have been error messages generated. I've tried using both a Data Reader and an OLEDB Datasource. Does anyone have any ideas of what's going on and how I might fix it?
I have a project which spans multiple servers and aggregates literally billions of rows of data into a much smaller and manageable result set which I store on another server. There are two stored procedures which take up 99.9% of the processing time. Each one of these SPs are estimated to run over 3 hours a piece (gives you an indication of how much data there really is). With in this SSIS package, I have two control flows, one for each SP. When I run the SSIS package from VS2005, I can see that there is a pre-execute phase which takes about an hour abnd a half to complete, and then move on to executing. My question is, what the heck is this, and what is it doing? I know it validates the sql in the procedure, but does it actually run the SP during that pre-execute phase? If it does, is there any way to get around that?
I am trying to import an xlsx spreadsheet into a sql 2008 r2 database using the SSMS Import Wizard. When pointed to the spreadsheet ("choose a data source") the Import Wizard returns this error:
"The operation could not be completed" The Microsoft ACE.OLEDB.12.0 provider is not registered on the local machine (System.Data)
How can I address that issue? (e.g. Where is this provider and how do I install it?)
l've some excel files controlled by Vendor which changing frequently. The only thing does not change is the header name of each column.
So my question is, is there any way to create a new table based on the excel file selected including the column name in SSIS? So that l can use the data reader as source to select those columns l am interested on and start the integration.
Hi I want to import excel in SSIS via sql command and change the data types. can anyone guide me on this or give me some sample command on how to change datatypes explicitly.
I'm importing a multi tab spreadsheet using Import wizard, which I understand to use the same internals as SSIS. The total number of columns in the spread sheet will be over 500. The import wizard defaults everything to varchar 255. I understand there is an XML file I can manipulate to change this and they are located
I am trying to copy data from a SQL Server 2000 DB to SQL Server 2005 DB using the import/export wizard in SQL Server Management Studio. The two databases are not identical with different table names and different columns but I thought I had set up all the right mappings and had set the 'Enable identity insert' option. When I ran the wizard it errored at the Pre-execute phase. I simplified the wizard down to one table and only as couple of varchar columns and this also errored in the same way. The error report is detailed below.
For reference the SQL2000(ent. edn) DB is on a windows 2000 server and the SQL2005(dev. edn) DB and the management studio are both on my WinXPSP2 workstation.
Could somebody explain why these errors have occured and more importantly how to rectify the problem?
Many thanks, Michael.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Warning)
Messages
Warning 0x80047076: Data Flow Task: The output column "DateAdd" (23) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance. (SQL Server Import and Export Wizard)
Warning 0x80047076: Data Flow Task: The output column "DateChg" (26) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance. (SQL Server Import and Export Wizard)
... NOTE: I have removed the rest of the warnings as they were the same as above (many of them).
- Pre-execute (Error)
Messages
Error 0xc0202009: Data Flow Task: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". (SQL Server Import and Export Wizard)
Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid. (SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - Nrs_NewsArticles" (112) failed the pre-execute phase and returned error code 0xC0202025. (SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [NereusV2_1].[dbo].[Nrs_NewsArticles] (Stopped)
- Post-execute (Stopped)
- Cleanup (Success)
Messages
Information 0x4004300b: Data Flow Task: "component "Destination - Nrs_NewsArticles" (112)" wrote 0 rows. (SQL Server Import and Export Wizard)
I need to execute an excel file (built with macro) whenever a date change is detected between 2 fields in my sql table.
if @Date1<>@Date2 begin DECLARE @command varchar(1000) SET @command='d:Refresh_ABC.bat' exec xp_cmdshell @command . . .
In my Refresh_ABC.bat, I have the following line Start Excel.exe "D:ABC.xls"
When I tested the above script (from Declare... to @command) in query analyzer, nothing seems to happen. It shows The command(s) completed successfully. But my excel file was not refreshed at all. When I ran the batch file Refresh_ABC.bat on it's own, ABC.xls was refreshed so the batch file is working.
Next test, I placed the line Start Excel.exe "D:ABC.xls" on SET @command = ......... line. Same problem, nothing happened.
Any idea what went wrong. Please advise. Thank you.
I am importing data from Excel to SQL Server. My Excel files are .html file format. Using ActiveX Script I am saving that file to xls file format as follows
Set myXL = CreateObject("Excel.Application") Set myXLWorkBook = myXL.Workbooks.Open(filename) Set myXLWorkSheet = myXL.ActiveSheet
myXLWorkBook.SaveAs filename, 43 '43-xlExcel9795 Set oPkg = DTSGlobalVariables.Parent Set oConn = oPkg.Connections("Excel")
This script works fine but it prompts me that the file already exists do you want to replace it. How can I avoid this prompt
Secondly this file contains data like that Col1 Col9 Col10 Row-1 Report Name Row-2 From Date Row-3 To Date Location Count Amount 9999 1 100.00 9876 10 20.40
Where Row are the excel rows
The TransformData Task thinks that the Col 1 is of nvarchar(255) but after the tranfer all values in Col1 is NULL. How can I convert a nvarchar to Char or varchar
I'm needing to import a .csv file into a SQL database. This needs to be done through automation so I need the DOS commands, if any. Or if someone knows a better way, feel free to enlighten me.
I've tried looking in books online for SQL server but haven't had much luck.
I've been asked to create an automated DTS import which is to take place each and every evening. The import routine is to import data into an SQL table from an Excel spreadsheet. The spreadsheet is not massively complicated though is does contain formulas and calculations. When using the DTS Wizard: "Choose Data Sourse" Data Source = Microsoft Excel 97-2000 I then browse to the file name.
"Choose Destination" I select the Server name and Database to import into.
"Specify Table Copy or Query" I select 'Use a query to specify the data transfer' then click Next.
I then click on the query builder and here's where I get stuck. The Source tables panel contains many rows and when expanded they all contain the same thing (field headings in the Excel spreadsheet).
I'm totally stuck here - can anyone help? :confused:
I have to import Excel file to SQL Server 2005 using SSIS. I am having alot of problems and was wondering if it's no trouble if you could please instruct me how to proceed.
My scenario: I have an excel file that contains a heading and then subheading such as HEADING Acc_g Acc_n 12 n_a2 13 n_b3
My database has a table called accounts with fields acc_g and acc_n. I need to enter the values from the excel into the table. I tried doing it but SSIS also tries to insert the rows following the last line in excel and returns nulls and the table does't allow null values. How can i resolve it?
I am trying to import data from an excel spreadsheet. The file comes from a client and sometimes it may not have any data, that is, it will be blank. It seems that the Excel Source in SSIS does not like empty files, is there any way around this? I suppose I can check to see if it is empty and abort the import process but I am not sure how to do this. Any other ideas on how to get around this??
i want a simple way (straight forward) to import data from excel to sql, not only this, but the excel file is not located on the SQL server itself. my situation is the a person upload a file via asp.net and the file should be imported to excel(i want to use sql to transform and not parse in .net, then insert into database).
Hi, I'm building a web application in VB.NET 1.1 where users will upload Excel files at this webpage and the web application will transfer the data from the uploaded Excel file into MS SQL 2000. There are around 600-700 records and about 56 columns in the Excel file which is to be uploaded daily. There will be a few different files which I need to implement for as well. I've sourced for and tried alot of methods. But either they can't satisfy my requirements or they just can't simply work. - Most simple and direct way I've tried is creating a oledb connection to the Excel file in the following codes... Function TestUploadData1(ByVal vFile As String) As String Dim Oleda As System.Data.OleDb.OleDbDataAdapter Dim Olecn As System.Data.OleDb.OleDbConnection Dim dt1 As DataTable Olecn = New System.Data.OleDb.OleDbConnection( _ "Provider=Microsoft.Jet.OLEDB.4.0;" & _ "Data Source=" & vFile & ";" & _ "Extended Properties=Excel 8.0;HDR=Yes") Olecn.Open() Dim ExcelCommand As New System.Data.OleDb.OleDbCommand("SELECT INTO [ODBC;Driver={SQL Server};Server=(local);Database=dbSSC;Trusted_Conn ection=yes].[tblOutstanding] FROM [Report$];", Olecn) ExcelCommand.ExecuteNonQuery() Olecn.Close() End Function But from the above codes I kept getting the error "Could not find installable ISAM." at the line Olecn.Open(). I've tried to set the registry to C:WindowsSystem32msexcl40.dll but to no avail... - I've tried another method using the OpenRowSet in the following codes Function TestUploadData2(ByVal vFile As String) As String Dim cn As SqlConnection Dim cm As SqlCommand Dim strSQL As String cn = New SqlConnection("server=localhost; user ID=accessSSC; password=accessSSC541; database=dbSSC") cn.Open() strSQL = "INSERT INTO tblOutstanding SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=" & vFile & ";HDR=Yes','SELECT * FROM [Report$]')" cm = New SqlCommand(strSQL, cn) cm.ExecuteNonQuery() cn.Close() End Function For the above codes, I kept getting the error "Ad hoc access to OLE DB provider 'Microsoft.Jet.OLEDB.4.0' has been denied. You must access this provider through a linked server." at the line cm.ExecuteNonQuery() and I've tried to disable the Ad Hoc settings in the registry and tried to create a link server but to no avail as well... - I've tried DTS but I'd need to DTS package to run whenever the users upload a file. Is there an easy way that I can run the designated DTS package to run through my .Net web application? Any help would be deeply appreciated. Thanks & Regards, Keith Chang
I am writing a custom application which will allow users to upload data in a Excel to SQLServer.
The problem I have is that Excel can come with a number of worksheets. I would ideally like to read from the default work sheet - is there a way I can specify that my code should only pick up the default worksheet?
Hi guys, I need to import data from excel to MS SQL table, but I already have data in MS SQL table, I just want to update one column. How can I do that?
I have data in excel files I want to import it to existing SQL Server database. I can use SQL Server built in import tool but before Importing, the data needs to be validated. What is the best way to do this?
On SQL 2005 I am trying automatically through the import 'wizard' import data from excel into an existing table that I have created. I can't find a way to do this without creating a new table. Any takes?
